Digitally printed custom trays assembled with occlusion rims and gothic arch tracing devices attached with tenon-and-mortise joints for biofunctional complete dentures: A dental technique.

A novel technique of digitally printed custom trays assembled with occlusion rims and gothic arch tracing devices attached with tenon-and-mortise joints for biofunctional complete dentures that could be delivered in 2 visits is presented. This technique takes advantage of closed-mouth impressions and objective jaw relation records by following the biofunctional prosthetic system concept with high efficiency and reduced labor.

Potential Roles of Selectins in Periodontal Diseases and Associated Systemic Diseases: Could They Be Targets for Immunotherapy?

Periodontal diseases are predisposing factors to the development of many systemic disorders, which is often initiated via leukocyte infiltration and vascular inflammation. These diseases could significantly affect human health and quality of life. Hence, it is vital to explore effective therapies to prevent disease progression. Periodontitis, which is characterized by gingival bleeding, disruption of the gingival capillary's integrity, and irreversible destruction of the periodontal supporting bone, appears to be caused by overexpression of selectins in periodontal tissues. Selectins (P-, L-, and E-selectins) are vital members of adhesion molecules regulating inflammatory and immune responses. They are mainly located in platelets, leukocytes, and endothelial cells. Furthermore, selectins are involved in the immunopathogenesis of vascular inflammatory diseases, such as cardiovascular disease, diabetes, cancers, and so on, by mediating leukocyte recruitment, platelet activation, and alteration of endothelial barrier permeability. Therefore, selectins could be new immunotherapeutic targets for periodontal disorders and their associated systemic diseases since they play a crucial role in immune regulation and endothelium dysfunction. However, the research on selectins and their association with periodontal and systemic diseases remains limited. This review aims to discuss the critical roles of selectins in periodontitis and associated systemic disorders and highlights the potential of selectins as therapeutic targets.

Evaluating the effectiveness of a novel digital evaluation technology on dental preclinical crown preparation training.

OBJECTIVES: To evaluate the assessment scores of a novel digital training program versus traditional training in dental preclinical crown preparation. METHODS: Crown preparations in two consecutive preclinical training sessions were retrospectively collected and assigned to three groups: traditional group (TG), scanning group (SG), and digital evaluation group (DG). Students in the TG (n = 20) were taught by conventional visual grading, while students in the SG (n = 25) received three-dimensional feedback from digitally scanned preparations. All the SG students continued with supplementary digital evaluation and preparations were allocated into the DG (n = 25). Comparison of total scores between groups was investigated using independent samples t-test and paired samples t-test. Mann‒Whitney U-test and Wilcoxon signed-rank test were used to statistically analyze the differences in subdividing categories. The level of significance was p < 0.05. Questionnaires on the digital evaluation procedure were answered by students in DG. RESULTS: The results showed a significant improvement (p < 0.01) in the total scores of DG than those of TG and SG, while there were no statistically significant differences between TG and SG. Scores of surface finish and undercut improved significantly in DG compared to TG and SG. The reduction scores of DG were significantly higher than those of SG. Students' feedback indicated a positive perspective on the implementation of the novel digital evaluation technology. CONCLUSIONS: These findings suggest that digital evaluation technology is useful for preclinical crown preparation training. Attention should also be paid to studying the optimal integration of digital dentistry into traditional dental curricula and its effects on students' learning curves.

Promoted Abutment-Soft Tissue Integration Around Self-Glazed Zirconia Surfaces with Nanotopography Fabricated by Additive 3D Gel Deposition.

Introduction: Improving the biological sealing around dental abutments could promote the long-term success of implants. Although titanium abutments have a wide range of clinical applications, they incur esthetic risks due to their color, especially in the esthetic zone. Currently, zirconia has been applied as an esthetic alternative material for implant abutments; however, zirconia is purported to be an inert biomaterial. How to improve the biological activities of zirconia has thus become a popular research topic. In this study, we presented a novel self-glazed zirconia (SZ) surface with nanotopography fabricated by additive 3D gel deposition and investigated its soft tissue integration capability compared to that of clinically used titanium and polished conventional zirconia surfaces. Materials and Methods: Three groups of disc samples were prepared for in vitro study and the three groups of abutment samples were prepared for in vivo study. The surface topography, roughness, wettability and chemical composition of the samples were examined. Moreover, we analyzed the effect of the three groups of samples on protein adsorption and on the biological behavior of human gingival keratinocytes (HGKs) and human gingival fibroblasts (HGFs). Furthermore, we conducted an in vivo study in which the bilateral mandibular anterior teeth of rabbits were extracted and replaced with implants and corresponding abutments. Results: The surface of SZ showed a unique nanotopography with nm range roughness and a greater ability to absorb protein. The promoted expression of adhesion molecules in both HGKs and HGFs was observed on the SZ surface compared to the surfaces of Ti and PCZ, while the cell viability and proliferation of HGKs and the number of HGFs adhesion were not significant among all groups. In vivo results showed that the SZ abutment formed strong biological sealing at the abutment-soft tissue interface and exhibited markedly more hemidesmosomes when observed with a transmission electron microscope. Conclusion: These results demonstrated that the novel SZ surface with nanotopography promoted soft tissue integration, suggesting its promising application as a zirconia surface for the dental abutment.

Simultaneous removal of aqueous same ionic type heavy metals and dyes by a magnetic chitosan/polyethyleneimine embedded hydrophobic sodium alginate composite: Performance, interaction and mechanism.

Heavy metals and azo dyes caused huge harm to the aqueous system and human health. A magnetic chitosan/polyethyleneimine embedded hydrophobic sodium alginate composite (MCPS) was designed and prepared to simultaneously remove aqueous same ionic type heavy metals and azo dyes. In mono-polluted system, the optimal pH for Cr(VI), MO (methyl orange), Cu(Ⅱ) and MB (methylene blue) were 3, 2, 6 and 12 with a saturated adsorption capacity of 87.53, 66.41, 351.03 and 286.54 mg/g, respectively. Pseudo-second-order was suitable to describe the adsorption kinetics of them and the adsorption isotherms were more consistent with the Langmuir isotherm model being a spontaneous, endothermic, and entropy-increasing process. In binary-polluted system, MCPS possessed simultaneous adsorption for Cr (Ⅵ)-MO and Cu(Ⅱ)-MB pollutants at their optimal pH, in addition, whether in anionic or cationic solution, the removal of heavy metals were promoted with the add of azo dyes but the removal of azo dyes were suppressed with the add of heavy metals. Both Cr (Ⅵ)-MO and Cu(Ⅱ)-MB pollutants could be effectively adsorbed and desorbed from MCPS by changing the pH of the aqueous solution to realize recyclability. Lastly, removal mechanism was revealed in detail by FT-IR, EDS and XPS.

Enhancing undergraduate research talents: the role of tutors in dental basic research education.

Purpose: This study endeavors to investigate ways to optimize the role of teachers in undergraduate dental basic research education (UDBRE) with the aim of nurturing the research potential of undergraduate students. Methods: We conducted a cross-sectional study among medical undergraduates enrolled at the School of Stomatology, Guangzhou Medical University. Descriptive statistics were employed to comprehensively analyze UDBRE's fundamental aspects. Kendall rank correlation analysis was performed to evaluate the relationship between the quality of feedback provided by tutors to undergraduates and the students' scientific research abilities. Additionally, multivariate logistic regression analysis was employed to uncover the factors influencing the effectiveness of UDBRE. Results: A total of 168 medical students were surveyed with a valid response rate of 93.85%. The effectiveness of UDBRE was demonstrated by undergraduates' self-rated research abilities, active participation in scientific research projects, and a certain amount of academic outputs. Significant and positive correlations (𝓣b> 0.5, p < 0.001) were identified between the tutor-undergraduate feedback quality and students' self-rated scores for scientific research abilities. These abilities included developing scientific questions, designing research projects, retrieving and reading literature, academic writing, experiment operation, and analyzing and evaluating experimental results. Positive effects on students' academic performance (p < 0.05) were observed when higher-quality feedback, an authoritative tutoring style and tutors with middle-career experience were present. Conclusion: This study underscores the pivotal role of UDBRE in fostering the scientific research aptitude of medical undergraduates. It emphasizes the constructive influence of tutor-undergraduate feedback, authoritative teaching styles, providing valuable insights for establishing an effective mentorship framework.

Lever arm on bracket vs. lever arm on archwire: A 3D finite element method study of mechanics of miniscrew-supported lingual en-masse retraction of maxillary anterior teeth.

OBJECTIVE: To compare the deformation of the main archwire and 3D movements of maxillary anterior teeth during miniscrew-supported en-masse retraction with the lever arm on the archwire and on the brackets in lingual orthodontic treatment in finite element analysis (FEM) simulation. MATERIAL AND METHODS: A 3D dental-alveolar model with bonded 0.018×0.025-inch slot lingual brackets and a 0.017×0.025-inch dimension stainless-steel archwire was created. Four FEM models were created based on a 3D dental-alveolar model: in Models A and C, the lever arms were attached to the lingual bracket, while in Models B and D, the lever arms were attached to the archwire. Meanwhile, in Models A and B, the miniscrews were placed in between the molars, while in Models C and D, the miniscrews were positioned on the palatal roof. After a 1.5N retraction force was applied from the miniscrew to the end of the lever arm, the initial movements in the sagittal, transversal, and vertical planes were recorded and analysed for maxillary anterior teeth. RESULTS: In Models B and D, smaller deformation of the main archwire and less prominent bowing effect were noticed in both sagittal and vertical directions compared to their counter groups. In Models C and D, the central incisors showed less torque loss in the sagittal direction and more canine intrusion vertically. CONCLUSIONS: For the same lever arm-miniscrew retraction configuration, the lever arm on the bracket showed less deformation of the main archwire and more body movement of the teeth than the lever arm on the archwire group. With the same level arm height, the transverse and vertical bowing effect is reduced when the lever arm was placed distal to the central incisor and the miniscrews placed next to the palatal suture.

Consensus on the preparation margin and restoration margin in ceramic esthetic rehabilitation.

In esthetic rehabilitation, methods used to enhance the margin quality have always been the focus and difficulty of improving the level of diagnosis and treatment, prevention and treatment of complications, and collaboration between clinicians and technicians. However, it is impeded by the ambiguous definition and classification of margin, unstandardized tooth preparation, manufacturing process of restoration, and lack of reliable means of checking the quantitative requirements of preparation or restoration. The digital technologies that are increasingly applied, such as intra-oral scanner, impression scanner, and computerized numerical control cutting machine, have strict requirements about margin quality. Failure of recognizing margins by these scanners will hinder the digital process of diagnosis and treatment. Even if these sharp and narrow margins are successfully scanned, they cannot be milled accurately. To overcome these problems, this article demonstrated the clear and complete definition of preparation margin and restoration margin, as well as their subclassifications, by analyzing the target restoration space from a geometric perspective. Practical approaches to measuring the margin width and inspecting the margin quality were proposed. The new and full understanding and proposal about preparation margin and restoration margin characterized by measurements will effectively support the thoroughly digitalized process of esthetic rehabilitation using porcelain in fixed prosthodontics, which is based on the guidance of values.

Rapid and improved oral absorption of N-butylphthalide by sodium cholate-appended liposomes for efficient ischemic stroke therapy.

As a multi-target drug to treat ischemic stroke, N-butylphthalide (NBP) is extremely water-insoluble and exhibits limited oral bioavailability, impeding its wide oral application. Effective treatment of ischemic stroke by NBP requires timely and efficient drug exposure, necessitating the development of new oral formulations. Herein, liposomes containing biosurfactant sodium cholate (CA-liposomes) were systemically investigated as an oral NBP delivery platform because of its high biocompatibility and great potential for clinical applications. The optimized liposomes have a uniform hydrodynamic size of 104.30 ± 1.60 nm and excellent encapsulation efficiency (93.91 ± 1.10%). Intriguingly, NBP-loaded CA-liposomes produced rapid drug release and the cumulative release was up to 88.09 ± 4.04% during 12 h while that for NBP group was only 6.79 ± 0.99%. Caco-2 cell monolayer assay demonstrated the superior cell uptake and transport efficiency of NBP-loaded CA-liposomes than free NBP, which was mediated by passive diffusion via transcellular and paracellular routes. After oral administration to rats, NBP-loaded CA-liposomes exhibited rapid and almost complete drug absorption, with a tmax of 0.70 ± 0.14 h and an absolute bioavailability of 92.65% while NBP suspension demonstrated relatively low bioavailability (21.7%). Meanwhile, NBP-loaded CA-liposomes produced 18.30-fold drug concentration in the brain at 5 min compared with NBP suspension, and the brain bioavailability increased by 2.48-fold. As expected, NBP-loaded CA-liposomes demonstrated significant therapeutic efficacy in a middle cerebral artery occlusion rat model. Our study provides new insights for engineering oral formulations of NBP with fast and sufficient drug exposure against ischemic stroke in the clinic.

Nanostructured Zirconia Surfaces Regulate Human Gingival Fibroblasts Behavior Through Differential Modulation of Macrophage Polarization.

Zirconia exhibits excellent biocompatibility and is widely used as dental implant materials in prosthodontics. Over the past years, research and development of dental implant biomaterials has focused on osseointegration, but few reports exist regarding the role of the immune environment on cellular responses to these materials. The present study investigates the effect of different nanostructured zirconia surface topographies on macrophage phenotypes and their influence on gingival fibroblast behavior. Three different nanostructured zirconia surfaces are characterized using scanning electron microscopy, atomic force microscopy, and water contact angle. Blank-machined zirconia (BMZ) surfaces were superior to RAW264.7 cell proliferation and adhesion. RAW264.7 seeded on all nanostructured zirconia surfaces polarized toward both inflammatory M1 and anti-inflammatory M2 macrophages with more M2 macrophage phenotype on BMZ surfaces. Meanwhile, conditioned media (CM) from RAW264.7 culture on three nanostructured zirconia surfaces inhibited cell apoptosis to human gingival fibroblasts (HGFs) but promoted HGF proliferation and secretion. Under modulation of RAW264.7 culture, HGFs cultured on BMZ surfaces significantly secreted more extracellular matrix with a higher expression of collagen-I (COL-I), vinculin (VCL), and fibronectin (FN) than those coated on self-glazed zirconia (CSGZ) and self-glazed zirconia (SGZ) surfaces. After being coated with a nano zirconia film, CSGZ surfaces showed certain changes in cell proliferation, adhesion, and protein production compared with SGZ surfaces. These findings will provide an overview of manipulating surface topography to modulate macrophage phenotypes in order to create an effective macrophage immune response and reinforce soft tissue integration.

Synergetic effect of chemical and topological signals of gingival regeneration scaffold on the behavior of human gingival fibroblasts.

Achievement of gingiva regeneration poses a substantial challenge for dental aesthetics and periodontal disease repair, but reports of a bioactive and easily available gingival regeneration scaffold are rare. Cell behaviors can be affected by multiple kinds of bioactive signals; thus, it is important to explore the effects of the chemical and topological signals of the scaffold on the behavior of human gingival fibroblasts (HGFs). We hypothesized that the synergetic effect of the chemical and topological scaffold signals were beneficial to gingival regeneration. In this study, HGF behavior on random/aligned poly (e-caprolactone) (PCL) and polydopamine (PDA)-coated PCL electrospun scaffolds was investigated in a common medium and in basic fibroblast growth factor (bFGF) medium. The results showed that the synergistic effect of three signals was better than that of one or two signals. The cell proliferation of the aligned scaffold group was higher than that of the random scaffold, and the PCL/PDA-Aligned+bFGF group showed the highest cell proliferation. Even if two chemical signals were present, the HGFs still maintained an ordered distribution on the aligned scaffold. Cell differentiation and protein secretion analysis indicated that gene and protein expression of focal adhesion kinase and fibronectin were the highest in the PCL/PDA-Aligned+bFGF group. Taken together, the chemical and topographic signals within the electrospun scaffold were considered to display a synergistic effect on HGF behaviors, suggesting the potential usefulness of the PCL/PDA-Aligned+bFGF scaffold for gingiva tissue engineering.

Extremely Effective Chemoradiotherapy by Inducing Immunogenic Cell Death and Radio-Triggered Drug Release under Hypoxia Alleviation.

Local hypoxia in solid malignancies often results in resistance to radiotherapy (RT) and chemotherapy (CT), which may be one of the main reasons for their failure in clinical application. Especially, oxygen is an essential element for enhancing DNA damage caused by ionizing radiation in radiotherapy. Here, two biomimetic oxygen delivery systems were designed by encapsulating hemoglobin (Hb) alone into a liposome (Hb-Lipo) or co-encapsulating Hb and doxorubicin (DOX) into a liposome (DOX-Hb-Lipo). Our data indicated that both Hb-Lipo and DOX-Hb-Lipo could effectively alleviate hypoxia in tumors. We demonstrated that RT plus tumor-targeting delivery of oxygen mediated by Hb-Lipo could significantly overcome the tolerance of hypoxic cancer cells to RT, showing significantly enhanced cancer-cell killing and tumor growth inhibition ability, mainly attributing to hypoxia alleviation and increased reactive oxygen species production under RT in cancer cells. Furthermore, a melanoma model that was quite insensitive to both RT and CT was used to test the efficacy of chemoradiotherapy combined with hypoxia alleviation. RT plus Hb-Lipo only caused a limited increase in antitumor activity. However, extremely strong tumor inhibition could be obtained by RT combined with DOX-Hb-Lipo-mediated CT, attributed to radio-triggered DOX release and enhanced immunogenic cell death induced by RT under an oxygen supplement. Our study provided a valuable reference for overcoming hypoxia-induced radioresistance and a useful therapeutic strategy for cancers that are extremely insensitive to chemo- or radiotherapy.

Development of a Traditional Chinese Medicine Syndrome-Specific Scale for Ulcerative Colitis: The Large Intestine Dampness-Heat Syndrome Questionnaire.

The aim of this study was to develop and validate the large intestine dampness-heat syndrome questionnaire (LIDHSQ) for patients with ulcerative colitis (UC). The domains and items of the LIDHSQ were developed according to standard procedures, namely, construct definition, item generation, language testing, content validity, pilot study, and validation study. At first, a total of 20 items in 3 domains were generated based on literature review and expert consultation. After the item selection, the LIDHSQ contains 11 items in three domains: disease-related domain (diarrhoea, abdominal pain, bloody purulent stool, and mucus stool), heat domain (fever, dry mouth, red tongue, yellow fur, and anal burning), and dampness domain (greasy fur and defecation disorder). The Cronbach's alphas of all domains were greater than 0.6. All of the intraclass correlation coefficients were greater than 0.8. The LIDHSQ and domain scores of the patients with LIDHS were higher than those of the patients with other syndromes (P < 0.001). The area under the receiver operating characteristic curve of the LIDHSQ was 0.900, with a 95% confidence interval of 0.872-0.928. When the cut-off value of the LIDHSQ was ≥ 7, the sensitivity and specificity were 0.867 and 0.854, respectively. The LIDHSQ is valid and reliable for measuring LIDHS in UC patients with good diagnostic efficacy. We recommend the use of the LIDHSQ in Chinese UC patients.

A Dosimetric Study of Using Fixed-Jaw Volumetric Modulated Arc Therapy for the Treatment of Nasopharyngeal Carcinoma with Cervical Lymph Node Metastasis.

PURPOSE: To study the dosimetric difference between fixed-jaw volumetric modulated radiotherapy (FJ-VMAT) and large-field volumetric modulated radiotherapy (LF-VMAT) for nasopharyngeal carcinoma (NPC) with cervical lymph node metastasis. METHODS: Computed tomography (CT) datasets of 10 NPC patients undergoing chemoradiotherapy were used to generate LF-VMAT and FJ-VMAT plans in the Eclipse version 10.0 treatment planning system. These two kinds of plans were then compared with respect to planning-target-volume (PTV) coverage, conformity index (CI), homogeneity index (HI), organ-at-risk sparing, monitor units (MUs) and treatment time (TT). RESULTS: The FJ-VMAT plans provided lower D2% of PGTVnd (PTV of lymph nodes), PTV1 (high-risk PTV) and PTV2 (low-risk PTV) than did the LF-VMAT plans, whereas no significant differences were observed in PGTVnx (PTV of primary nasopharyngeal tumor). The FJ-VMAT plans provided lower doses delivered to the planning organ at risk (OAR) volumes (PRVs) of both brainstem and spinal cord, both parotid glands and normal tissue than did the LF-VMAT plans, whereas no significant differences were observed with respect to the oral cavity and larynx. The MUs of the FJ-VMAT plans (683 ± 87) were increased by 22% ± 12% compared with the LF-VMAT plans (559 ± 62). In terms of the TT, no significant difference was found between the two kinds of plans. CONCLUSIONS: FJ-VMAT was similar or slightly superior to LF-VMAT in terms of PTV coverage and was significantly superior in terms of OAR sparing, at the expense of increased MUs.

[Experimental study of tissue-engineered bone constructed with simvastatin carried by PLGA/CPC and bone marrow stromal cells].

PURPOSE: To study the feasibility of tissue engineered bone constructed with simvastatin carried by PLGA/CPC and bone marrow stromal cells (BMSCs) and screen the effective drug loading of simvastatin. METHODS: Solvent casting-particle leaching technology combined with the phase separation process was used to prepare the different concentrations (simvastatin mass: 0.1, 0.5, 1 mg) of simvastatin carried by PLGA/CPC composite scaffold materials. Scanning electron microscopy was used to observe the porosity and drug release curve was drawn; Alizarin red staining and type I collagen staining were applied to observe the effect of osteogenic medium and simvastatin on the role of BMSCs to the osteogenetic differentiation. The induced passage 3 cells after dil staining were mixed with the composite scaffold material to a complex. Scanning electron microscopy and laser confocal microscope were used to observe the adhesion on the complex. CCK-8 and alkaline phosphatase (ALP) were applied to observe the proliferation and differentiation. SPSS 18.0 software package was used for statistical analysis. RESULTS: The scaffold porosity was more than 90% with an average aperture of 200-300 µm. The drug released slowly. There was no obvious interpretation. Type I collagen showed positive expression. Alizarin red staining proofed the formation of mineralization nodules in group which was induced with the conditional medium and simvastatin. 0.5 mg group showed cells adhered to the inner surface of the scaffold material and could significantly promote the proliferation and differentiation of cells. CONCLUSIONS: Combination of simvastatin and osteogenic medium can effectively promote the differentiation of BMSCs. Simvastatin carried by PLGA/CPC scaffold materials is an ideal tissue engineering scaffold material. PLGA/CPC scaffold containing 0.5 mg simvastatin can effectively promote the proliferation and differentiation of BMSCs. Supported by Natural Science Foundation of Jilin Province (201215052).

The effect of simvastatin on mRNA expression of transforming growth factor-beta1, bone morphogenetic protein-2 and vascular endothelial growth factor in tooth extraction socket.

AIM: To determine the effect of local simvastatin application on the mRNA expression level of transforming growth factor-beta1 (TGF-beta1), bone morphogenetic protein-2 (BMP-2) and vascular endothelial growth factor (VEGF) in the tooth sockets of rat. METHODOLOGY: Forty-eight male Wistar rats were randomly divided into experimental and control groups (n = 24). Polylactic acid/polyglycolic acid copolymer carriers, with or without simvastatin, were implanted into extraction sockets of right mandibular incisors. The expression of TGF-beta1, BMP-2 and VEGF mRNA was determined by in situ hybridization in the tooth extraction socket at five days, one week, two weeks and four weeks after implantation. RESULTS: The fusiform stroma cells in the tooth extraction socket began to express TGF-beta1, BMP-2 and VEGF mRNA in both experimental and control groups from one week after tooth extraction until the end of experiment. The expression of TGF-beta1 and BMP-2 mRNA in the experimental group was significantly up-regulated after one, two and four weeks, and expression of VEGF mRNA was significantly increased after one and two weeks compared with that in the control group. CONCLUSION: The findings indicate that local administration of simvastatin can influence alveolar bone remodeling by regulating the expression of a school of growth factors which are crucial to osteogenesis in the tooth extraction socket.

The implementation of an integrated computer-aided system for dental implantology.

This paper presents an implementation of different functionalities on a computer-aided system for dental implantology. The integrated system consists of two subsystems corresponding to two main stages of dental implantology respectively. In the preoperative planning subsystem, we provide different kinds of views based on CT data scanned from a specific patient for the dentist. And the dentist can plan implant path according to these views. The intra-operative navigational subsystem uses an infra-red light based navigation camera to locate the precise position of the surgical instrument. At last, an improved experiment on a phantom model studied the error and accuracy, to demonstrate its feasibility on further clinical trial.

[Effect of simvastatin on residual ridge resorption after tooth extraction].

OBJECTIVE: To observe the effect of simvastatin carried by poly (lactide-co-glycolide) (PLGA) on residual ridge resorption following tooth extraction. METHODS: Sixty male Wistar rats were divided into experimental groups and control groups (30 rats/group). PLGA was immediately implanted with or without simvastatin into extraction sockets of the mandibular incisors. Soft X-ray photography, bone mineral density (BMD) and histopathologic study were conducted at 7, 14, 28, 56, and 84 days after implantation. RESULTS: The relative length values of residual alveolar ridge of the experimental groups were greater than those of the controls at 14, 28, 56, and 84 days after implantation, and there was a significant difference between the experimental and control groups (P < 0.05). The BMD of the specific region was higher in the experimental groups [(7.101 +/- 0.025), (7.178 +/- 0.039), and (7.162 +/- 0.052) g/cm(2)] than that in the control groups [(7.074 +/- 0.014), (7.117 +/- 0.012), and (7.059 +/- 0.037) g/cm(2)] (P < 0.05) after 28, 56, and 84 days. Light microscopy showed that bone formation rate and quality of the experimental group were better than those in the control group at the same time. CONCLUSIONS: Simvastatin carried by PLGA could induce bone formation of tooth socket. Local application of simvastatin would be potential to preserve the length and bone volume of alveolar ridge after tooth extraction.