BC@DNA-Mn3(PO4)2 Nanozyme for Real-Time Detection of Superoxide from Living Cells.

Electrochemical in situ sensing of small signal molecules released from living cells has an increasing significance in early diagnosis, pathological analyses, and drug discovery. Here, a living cell-fixed sensing platform was built using the BC@DNA-Mn3(PO4)2 nanozyme, in which a highly biocompatible bacterial cellulose riveted with very tiny Mn3(PO4)2; it not only delivers high catalytic activity toward superoxide anions but possesses excellent biocompatibility for cell adsorption and growth. Additionally, the experimental results suggested that fixing the living cells on the surface of the sensing platform facilitates tiny Mn3(PO4)2 activity centers to capture and detect O2•- very quickly and simultaneously has great potential in miniaturization, cost reduction, and real-time monitoring.

Identification and characterization of sericin5 reveals non-cocoon silk sericin components with high ß-sheet content and adhesive strength.

Sericins are glue proteins on the surface of silk fibers. Four sericins have been characterized in silkworm, namely sericin1 (Ser1), sericin2 (Ser2), sericin3 (Ser3), and sericin4 (Ser4). In this study, we report a novel sericin, sericin5 (Ser5), which exists only in non-cocoon silk. We describe the sequence, exon-intron structure, and translation products of Ser5 in Bombyx mori. The Ser5 gene is approximately 22-kb long and comprises 16 exons. Ser5 protein has a size of 260 kDa, as determined by SDS-PAGE, western blot, and LC-MS/MS. Immunofluorescence analysis revealed that Ser5 co-localizes with Ser1 in the sericin layer. The expression pattern of Ser5 was detected at the transcriptional and translational levels. We systematically analyzed and compared the amino acid composition, repeat regions, and hydrophilicity of silkworm sericins. Morphological observations showed that non-cocoon silk had more sericin than cocoon silk. Circular dichroism spectra revealed that non-cocoon silk sericin contained more ß-sheet structures than cocoon silk sericin. In addition, we found that the hydrophilicity and adhesive strength of native sericin increases gradually from the inner layer to the outer layer. This research enhances our understanding of various sericins from cocoon silk and non-cocoon silk with regard to their expression patterns, hydrophilicity, secondary structure and adhesive performances. STATEMENT OF SIGNIFICANCE: Sericin is a natural biomaterial with diverse biological properties, which has long been used as tissue engineering and biomedical applications. However, the composition and distribution of sericins in different kinds of silk are still uncertain, and the properties difference between sericins have not yet been reported. Our study makes a significant contribution to the literature as it identifies the sequence, composition, hydrophilicity and adhesive property of sericins. Moreover, it provides key insights into the structure-function and function-distribution relationships associated with sericins. We believe that this study will arouse the interest to the readership of your journal as it identifies the new complete sequence of sericin and revealed the composition and properties of sericin, thus highlighting their future potentials applications in both the biomaterial and technical fields.

Insights into the structure and composition of mineralized hard cocoons constructed by the oriental moth, Monema (Cnidocampa) flavescens Walker.

Animals widely use minerals and organic components to construct biomaterials with excellent properties, such as teeth, bones, molluscan shells and eggshells. The larvae of the oriental moth, Monema (Cnidocampa) flavescens Walker, secrete silk proteins that combine closely with calcareous minerals to construct a hard cocoon, which is completely different from the mineral-free Bombyx mori cocoon. The cocoons of oriental moths are likely to be the hardest among the cocoons constructed by insect species. The cocoons of oriental moths were found to be mainly composed of calcium oxalates and Asx/Ser/Gly-rich cocoon proteins, but the types of calcium oxalates and cocoon proteins remain to be elucidated. In this study, we provide an in-depth explanation of the inorganic and organic components in the oriental moth cocoon. Microscopy and imaging technologies revealed that the cocoon is composed of mineral crystals, silk fibers and other organic matter. X-ray diffraction and infrared spectral analyses showed that the mineral crystals in the oriental moth cocoon were mainly CaC2H2O4·H2O. ICP-OES analysis suggested that the mineral crystals in the cocoons were mainly CaC2H2O4·H2O. LC-MS/MS-based proteomics allowed us to identify 467 proteins from the oriental moth cocoon, including 252 uncharacterized proteins, 87 enzymes, 36 small molecule binding proteins, and 5 silk proteins. Among the uncharacterized proteins, 25 of which were Asn-rich proteins because they contained a high proportion of Asn residues (19.1%-41.4%). Among the top 20 cocoon proteins with the highest abundance, 9 of which were Asn-rich proteins. The qPCR was used to investigate the expression patterns of the major cocoon protein-coding genes. Three fibroins and three Asn-rich proteins were expressed only in the silk gland but not in other tissues. The expression of Asn-rich proteins in the silk gland gradually increased from the anterior silk gland to the posterior silk gland. These findings provide important references for understanding the formation mechanism and mechanical properties of mineralized hard cocoons constructed by oriental moths.

Protein composites from silkworm cocoons as versatile biomaterials.

Silk is a naturally occurring biopolymer formed into fibers composed primarily of fibroin and sericin proteins. The outstanding mechanical properties of silk fibroin (SF) provides numerous applications for silk-based biomaterials. However, the canonical approaches for fabricating silk-based biomaterials typically involve degumming to remove the silk sericin (SS) to avoid adverse biological effects. Meanwhile, sericin has multiple biological functions including outstanding hydrophilicity, promoting cell attachment that are useful to exploit in new materials, inspiring the use of sericin-based biomaterials for biomedical applications. However, compared to fibroin, sericin is not a structural protein, thus sericin-based materials do not provide robust mechanical properties. To address this problem, we report an effective method for fabricating silk fibroin-sericin protein (SS-SF) composites directly from whole cocoons, negating the traditional extraction step to remove the sericin. This approach combines the material features from both fibroin as a structural unit and sericin as a biological functional unit, to achieve advantages regarding processing and materials properties, not only simplifying processing and maintaining the mechanical properties of the fibroin by avoiding degumming, but also endowing these SS-SF composite materials with enhanced hydrophilicity and cell adhesion performance to promote cell growth and proliferation. In addition, these protein composites could be fabricated into a variety of materials formats (e.g. films, sponges, monoliths) to fit different biomedical applications.

An Innovative Solvent-Responsive Coiling-Expanding Stent.

Coronary artery disease is the "first killer" in the world, while the classical treatment for this disease is to implant stent. An ideal vascular stent should be nontoxic with self-expanding characteristics, quick expanding speed, and appropriate mechanical supporting property. However, no existing vascular stent covers all properties. Herein, a two-way shape-memory cellulose vascular stent, which can realize shape adjustments by mild solutions such as water and alcohol, is constructed. The shape-memory characteristics, mechanical properties, cell toxicity, and biocompatibility, are systemically investigated by ex vivo experiment as well as molecule simulation and theoretical modeling, revealing that the achieved bilayer two-way shape-memory films (BSMFs) can be used as an artificial vascular stent. In particular, this vascular stent made from BSMFs shows superb biocompatibility according to live/dead cell viability assays. Ex vivo experiments reveal that the novel vascular stent can support arteria coronaria sinistra, or the left main coronary artery, at the opening state while the cross-section of the vessel becomes two times larger than that of the initial state after implantation. Thus, it is believed that effective and scalable BSMFs can make meritorious fundamental contributions to biomaterials science and practical applications such as vascular stents.

Constructing Silk Fibroin-Based Three-Dimensional Microfluidic Devices via a Tape Mask-Assisted Multiple-Step Etching Technique.

Regenerated silk fibroin (RSF) has been regarded as a very promising biomaterial for the preparation of microfluidic devices. However, the facile and low-cost fabrication of three-dimensional (3D) RSF microfluidic devices is still a great challenge. Herein, we developed a tape-mask-assisted multiple-step etching technique to fabricate 3D microfluidic devices based on water-annealed RSF films. Several rounds of tape adhesion- or peeling-etching cycles need to be conducted to produce 3D features on the RSF films with the LiBr aqueous solution as the etchant. The water-annealed RSF films could be effectively etched with 1.0 g·mL-1 LiBr solution at 60 °C. The shape, width, and height of the 3D structures could be precisely tailored by controlling the mask pattern, etching conditions, and the number of etchings. Using the tape adhesion- and peeling-assisted multiple-etching techniques, the convex-pyramid-shaped and the concave-step-shaped structures could be successfully prepared on the RSF films, respectively. The RSF-film-based 3D micromixers and microfluidic separator were also manufactured with the proposed approach, exhibiting excellent liquid mixing and size-dependent particle sorting capabilities, respectively. The enzymatic degradation of RSF-film-based devices was also investigated to show their environmental friendliness. This work may not only provide a facile and low-cost method for the fabrication of RSF-based 3D microfluidic devices but also extend the applications of RSF in the fields of biomedical and chemical analysis.

Transgenic PDGF-BB/sericin hydrogel supports for cell proliferation and osteogenic differentiation.

Sericin has been exploited as a biomaterial due to its biocompatibility, biodegradability, and low-immunogenicity as an isolated polymer and support for cell adhesion. In the present study, human platelet-derived growth factor (PDGF-BB)-functionalized sericin hydrogels were generated using transgenic silkworms, where the as-spun silk incorporated engineered PDGF-BB (termed PDGFM) in the sericin layers of the cocoons. Sericin and PDGFM were simultaneously extracted from the silk fibroin cocoon fibers, and the soluble extract was then formed into a hydrogel via thermal exposure. The PDGFM sericin hydrogels exhibited increased ß-sheet content and a compressive modulus of 74.91 ± 2.9 kPa comparable to chemically crosslinked sericin hydrogels (1.68-55.53 kPa) and a porous microstructure, which contributed to cell adhesion and growth. A 13.1% of total extracted PDGFM from the initial silk fibers was incorporated and immobilized in the sericin hydrogels during material processing, and 1.33% of PDGFM was released over 30 days from the hydrogels in vitro. The remaining PDGFM achieved long-term storage/stability in the sericin hydrogels for more than 42 days at 37 °C. In addition, the PDGFM sericin hydrogels were not immunogenic, were biocompatible and bioactive in promoting the support of cell proliferation. When combined with BMP-9, the PDGFM sericin hydrogels provided synergy to support the osteoblastic differentiation of mesenchymal stem cells (hMSCs) in vitro and in vivo. This study demonstrates that genetically functionalized PDGFM sericin hydrogels can provide useful biomaterials to support cell and tissue outcomes, here with a focus on osteogenesis.

Design and performance of sericin/poly(vinyl alcohol) hydrogel as a drug delivery carrier for potential wound dressing application.

Developing a non-toxic, super-absorbent and antibacterial hydrogel as a skin wound dressing is of significant importance. Sericin hydrogel is an ideal dressing material as it has excellent biocompatibility, biodegradability, moisture retention, high affinity to biomolecules, self-healing and promoting cell proliferation activity. Here, we blended silk sericin (SS) with poly(vinyl alcohol) (PVA) to prepare a SS/PVA hydrogel through repetitive freeze-thawing. The photoluminescence of SS/PVA hydrogel indicated PVA was well blended with sericin. SS/PVA hydrogel showed excellent hydrophilicity and swelling behavior for its porous structure. PVA blending effectively improved the thermostability of sericin and enhanced the mechanical property of sericin, but did not affect the crystallinity of sericin and PVA. SS/PVA hydrogel exhibited the ability to load and release small molecule drugs and silver nanoparticles. Cytotoxicity and immuno-toxicity assays suggested the gentamicin loaded SS/PVA hydrogel had excellent cytocompatibility on mammalian cells. Bacterial inhibition assay and wound infection model demonstrated the gentamicin loaded SS/PVA hydrogel could effectively inhibit bacterial growth, thus maintain cells viability. This novel hydrogel with antimicrobial activity has shown great potential in wound dressing.

Genetically engineered bi-functional silk material with improved cell proliferation and anti-inflammatory activity for medical application.

Functional silk is a promising material for future medical applications. These include fabrication of diverse silk fiber and silk protein-regenerated biomaterials such as silk sutures, hydrogel, films, and 3D scaffolds for wound healing and tissue regeneration and reconstruction. Here, a novel bi-functional silk with improved cell proliferation and anti-inflammatory activities was created by co-expressing the human basic fibroblast growth factor (FGF2) and transforming growth factor-ß1 (TGF_ß1) genes in silkworm. First, both FGF2 and TGF_ß1 genes were confirmed to be successfully expressed in silk thread. The characterization of silk properties by SEM, FTIR, and mechanical tests showed that this new silk (FT silk) had a similar diameter, inner molecular composition, and mechanical properties as those of normal silk. Additionally, expressed FGF2 and TGF_ß1 proteins were continuously and slowly released from FT silk for one week. Most importantly, the FGF2 and TGF_ß1 contained in FT silk not only promoted cell proliferation by activating the ERK pathway but also significantly reduced LPS-induced inflammation responses in macrophages by mediating the Smad pathway. Moreover, this FT silk had no apparent toxicity for cell growth and caused no cell inflammation. These properties suggest that it has a potential for medical applications. STATEMENT OF SIGNIFICANCE: Silk spun by domestic silkworm is a promising material for fabricating various silk protein regenerated biomaterials in medical area, since it owes good biocompatibility, biodegradability and low immunogenicity. Recently, fabricating various functional silk fibers and regenerated silk protein biomaterials which has ability of releasing functional protein factor is the hot point field. This study is a first time to create a novel bi-functional silk material with the improved cell proliferation and anti-inflammatory activity by genetic engineered technology. This novel silk has a great application potential as new and novel medical material, and this study also provides a new strategy to create various functional or multifunctional silk fiber materials in future.

Preparation and characterization of silk sericin/PVA blend film with silver nanoparticles for potential antimicrobial application.

Sericin has great potentials in biomedical applications for its good reactive activity, biocompatibility and biodegradability. However, the undesirable mechanical performance limits its application. Here, we developed a green, facile and economic approach to prepare sericin/polyvinyl alcohol (PVA) blend film. Further, silver nanoparticles (AgNPs) were synthesized in situ on the surface of sericin/PVA film via UV-assisted green synthesis method. Mechanical performance, swelling, mass losing and water retention tests showed the blend film had good mechanical performance, hygroscopicity, water retention capacity and low mass losing ratio. Scanning electron microscopy, fourier transfer infrared spectroscopy, X-ray diffractometry diffraction and X-ray photoelectron spectroscopy indicated the blending of PVA and sericin promoted the formation of hydrogen bond network between sericin and PVA, thus enhanced the mechanical performance and the stability of sericin, as well as the hygroscopicity and water retention capacity. UV irradiation and AgNPs modification did not affect the inner crystalline structure of sericin/PVA blend film. The inhibition zone and bacteria growth curve assay suggested AgNPs-sericin/PVA film had good antibacterial activities against E. coli and S. aureus. This novel AgNPs-sericin/PVA film shows great potentials in biomedical materials such as wound dressing and skin tissue engineering.

Advanced silk material spun by a transgenic silkworm promotes cell proliferation for biomedical application.

Natural silk fiber spun by the silkworm Bombyx mori is widely used not only for textile materials, but also for biofunctional materials. In the present study, we genetically engineered an advanced silk material, named hSFSV, using a transgenic silkworm, in which the recombinant human acidic fibroblast growth factor (hFGF1) protein was specifically synthesized in the middle silk gland and secreted into the sericin layer to surround the silk fiber using our previously optimized sericin1 expression system. The content of the recombinant hFGF1 in the hSFSV silk was estimated to be approximate 0.07% of the cocoon shell weight. The mechanical properties of hSFSV raw silk fiber were enhanced slightly compared to those of the wild-type raw silk fiber, probably due to the presence of the recombinant of hFGF1 in the sericin layer. Remarkably, the hSFSV raw silk significantly stimulated the cell growth and proliferation of NIH/3T3 mouse embryonic fibroblast cells, suggesting that the mitogenic activity of recombinant hFGF1 was well maintained and functioned in the sericin layer of hSFSV raw silk. These results show that the genetically engineered raw silk hSFSV could be used directly as a fine biomedical material for mass application. In addition, the strategy whereby functional recombinant proteins are expressed in the sericin layer of silk might be used to create more genetically engineered silks with various biofunctions and applications.