Effect of suture properties on stability of middle cerebral artery occlusion evaluated by synchrotron radiation angiography.

BACKGROUND AND PURPOSE: The intraluminal suture technique for producing middle cerebral artery occlusion in rodents is the most commonly used method for modeling focal cerebral ischemia associated with clinical ischemic stroke. Synchrotron radiation angiography may provide a novel solution to directly monitor the success of middle cerebral artery occlusion. METHODS: Twenty adult Sprague-Dawley rats for middle cerebral artery occlusion models were prepared randomly with different suture head silicone coating. In vivo imaging was performed at beam line BL13W1, Shanghai Synchrotron Radiation Facility, Shanghai, China. RESULTS: Silicone-coated suture was superior to uncoated suture for producing consistent brain infarction. Additionally, silicone coating length was an important variable controlling the extent of the ischemic lesion: infarcts affected predominantly the caudate-putamen with large variability (<2 mm), both the cortex and caudate-putamen (2-3.3 mm), and most of the hemisphere, including the hypothalamus (>3.3 mm). CONCLUSIONS: Synchrotron radiation angiography provides a useful tool to observe hemodynamic changes after middle cerebral artery occlusion, and the physical properties of suture are critical to the success of the middle cerebral artery occlusion model.

[Measuring the density of wood and bamboo using computed tomography].

CT is widespread non-destructive detection technique for wood materials, and the density measurement is a key role during this application. In the present report, the use of CT for air-dry density measurement of wood and bamboo is described. The authors found that there were marked linear correlations between air-dry density (0.303-1.061 g x cm(-3)) of 24 kinds of woods and their respective CT value, as well as 25 kinds of lignin materials (including 24 kinds of woods and 1 kind of bamboo) and the CT value, both with correlation coefficient of 0.99, which belonged to the CT technological breakthrough for wood quantitative detection These research results show that CT is an appropriate way to measure density for wood and bamboo, and would provide technical support for CT used in the field of wood science research and wood processing.

Preparation and preliminary cytocompatibility of magnesium doped apatite cement with degradability for bone regeneration.

In the present study, we fabricated magnesium doped apatite cement (md-AC) with rapid self-setting characteristic by adding the mixed powders of magnesium oxide and calcium dihydrogen phosphate (MO-CDP) into hydroxyapatite cement (HAC). The results revealed that the md-AC with 50 wt% MO-CDP could set within 6 min and the compression strength could reach 51 MPa after setting for 1 h, indicating that the md-AC had highly initial mechanical strength. The degradability of the md-AC in Tris-HCl solution increased with the increase of MO-CDP amount, and the weight loss ratio of md-AC with 50 wt% MO-CDP was 57.5 wt% after soaked for 12 weeks. Newly flake-like apatite could be deposited on the md-AC surfaces after soaked in simulated body fluid (SBF) for 7 days. Cell proliferation ratio of MG(63) cells on md-AC was obviously higher than that of HAC on days 4 and 7. The cells with normal phenotype spread well on the md-AC surfaces and attached intimately with the substrate, and alkaline phosphatase (ALP) activity of the cells on md-AC significantly improved compared with HAC on day 7. The results demonstrate that the md-AC has a good ability to support cell proliferation and differentiation, and indicate a good cytocompatibility.

Magnetic-Sensitive Nanoparticle Self-Assembled Superhydrophobic Biopolymer-Coated Slow-Release Fertilizer: Fabrication, Enhanced Performance, and Mechanism.

Although commercialized slow-release fertilizers coated with petrochemical polymers have revolutionarily promoted agricultural production, more research should be devoted to developing superhydrophobic biopolymer coatings with superb slow-release ability from sustainable and ecofriendly biomaterials. To inform the development of the superhydrophobic biopolymer-coated slow-release fertilizers (SBSF), the slow-release mechanism of SBSF needs to be clarified. Here, the SBSF with superior slow-release performance, water tolerance, and good feasibility for large-scale production was self-assembly fabricated using a simple, solvent-free process. The superhydrophobic surfaces of SBSF with uniformly dispersed Fe3O4 superhydrophobic magnetic-sensitive nanoparticles (SMNs) were self-assembly constructed with the spontaneous migration of Fe3O4 SMNs toward the outermost surface of the liquid coating materials ( i.e., pig fat based polyol and polymethylene polyphenylene isocyanate in a mass ratio 1.2:1) in a magnetic field during the reaction-curing process. The results revealed that SBSF showed longer slow-release longevity (more than 100 days) than those of unmodified biopolymer-coated slow-release fertilizers and excellent durable properties under various external environment conditions. The governing slow-release mechanism of SBSF was clarified by directly observing the atmosphere cushion on the superhydrophobic biopolymer coating using the synchrotron radiation-based X-ray phase-contrast imaging technique. Liquid water only contacts the top of the bulges of the solid surface (10.9%), and air pockets are trapped underneath the liquid (89.1%). The atmosphere cushion allows the slow diffusion of water vapor into the internal urea core of SBSF, which can decrease the nutrient release and enhance the slow-release ability. This self-assembly synthesis of SBSF through the magnetic interaction provides a strategy to fabricate not only ecofriendly biobased slow-release fertilizers but also other superhydrophobic materials for various applications.

Structural and compositional analysis of a casting mold sherd from ancient China.

Casting had symbolic significance and was strictly controlled in the Shang dynasty of ancient China. Vessel casting was mainly distributed around the Shang capital, Yin Ruins, which indicates a rigorous centralization of authority. Thus, for a casting mold to be excavated far from the capital region is rare. In addition to some bronze vessel molds excavated at the Buyao Village site, another key discovery of a bronze vessel mold occurred at Daxinzhuang. The Daxinzhuang site was a core area in the east of Shang state and is an important site to study the eastward expansion of the Shang. Here, combining synchrotron X-rays and other physicochemical analysis methods, nondestructive three-dimensional structure imaging and different elemental analyses were conducted on this mold sherd. Through high penetration X-ray tomography, we obtained insights on the internal structure and discovered some pores. We infer that the generation of pores inside the casting mold sherd was used to enhance air permeability during casting. Furthermore, we suppose that the decorative patterns on the surface were carved and not pasted onto it. Considering the previous compositional studies of bronze vessels, the copper and iron elements were analyzed by different methods. Unexpectedly, a larger amount of iron than of copper was detected on the surface. According to the data analysis and archaeological context, the source of iron on the casting mold sherd could be attributed to local soil contamination. A refined compositional analysis confirms that this casting mold was fabricated locally and used for bronze casting.

Hydration induced material transfer in membranes of osmotic pump tablets measured by synchrotron radiation based FTIR.

Osmotic pump tablets are reliable oral controlled drug delivery systems based on their semipermeable membrane coating. This research used synchrotron radiation-based Fourier transform infrared (SR-FTIR) microspectroscopy and imaging to investigate the hydration induced material transfer in the membranes of osmotic pump tablets. SR-FTIR was applied to record and map the chemical information of a micro-region of the membranes, composed of cellulose acetate (CA, as the water insoluble matrix) and polyethylene glycol (PEG, as the soluble pore forming agent and plasticizing agent). The microstructure and chemical change of membranes hydrated for 0, 5, 10 and 30min were measured using SR-FTIR, combined with scanning electronic microscopy and atom force microscopy. The SR-FTIR microspectroscopy results indicated that there was a major change at the absorption range of 2700-3100cm(-1) in the membranes after different periods of hydration time. The absorption bands at 2870-2880cm(-1) and 2950-2960cm(-1) were assigned to represent CA and PEG, respectively. The chemical group signal distribution illustrated by the ratio of PEG to CA demonstrated that the trigger of drug release in the preliminary stage was due to the rapid transfer of PEG into liquid medium with a sharp decrease of PEG in the membranes. The SR-FTIR mapping results have demonstrated the hydration induced material transfer in the membranes of osmotic pump tablets and enabled reassessment of the drug release mechanism of membrane controlled osmotic pump systems.

Visualization and quantitative profiling of mixing and segregation of granules using synchrotron radiation X-ray microtomography and three dimensional reconstruction.

Tomographic imaging techniques have great potential for improving understanding of the dynamics of granular materials during manufacturing, handling, and storage. In this study, the synchrotron radiation X-ray computed microtomography (SR-µCT) was used non-invasively to monitor blend homogeneity of binary mixtures. Granular samples of microcrystalline cellulose and starch were characterized using the SR-µCT individually. Simultaneously, particle distribution was investigated by calculating the frequency distribution of a statistic for testing sphericity. Then, the microcrystalline cellulose and starch granules were blended in a cylindrical container. Influences of the time of rotations TR and the time of vibration TV on the mixture homogeneity were studied with the SR-µCT and statistical evaluation. The mixing index is also adopted to evaluate the mixture homogeneity of the particle system. The results showed that mixture homogeneity is improved with increasing TR. Furthermore, segregation increased with longer TV when particles are different in size and shape. The larger starch granules of non-spherical shape have a tendency to rise to the top, while the smaller microcrystalline cellulose granules which are spherical tend to migrate to the bottom of the mixture. Therefore, we demonstrate that SR-µCT can investigate the mixing and segregation of granular materials in three-dimensions combined with statistic method.

Optimizing suture middle cerebral artery occlusion model in C57BL/6 mice circumvents posterior communicating artery dysplasia.

The suture middle cerebral artery occlusion (MCAO) model is used worldwide in both academia and industry. However, the variable occurrence of dysplasia in posterior communicating arteries (PcomAs) induces high mortality and instability in permanent MCAO models, limiting the model's application to transient focal ischemia. In particular, high mortality in intraluminal suture MCAO models is associated with the dysplasia of PcomAs in C57BL/6 mice. Optimization of silicone coating length is critical for reducing mortality and generating stable infarct in this model. The aim of our study is to reduce mortality and improve the reproducibility of the intraluminal suture MCAO model in C57BL/6 mice, which have high variation in PcomA dysplasia. Adult male C57BL/6 mice (n=38) underwent MCAO using sutures with various diameters and silicone coating lengths. The occlusion of cerebral vessels was examined by synchrotron radiation live angiography. The morphology of PcomAs was examined under a microscope after MICROFIL(®) infusion. Neurological outcome, infarct volume, and mortality were examined within 28 days. Optimizing the silicone coating on an 8-0 suture tip, we were able to reduce the model mortality to zero after permanent occlusion in C57BL/6 and produce stable brain infarct volume independent of the patency of PcomAs.