Post-synthesis of a titanium-rich magnetic COF nanocomposite with flexible branched polymers for efficient enrichment of phosphopeptides from human saliva and serum.

A Ti4+-functionalized magnetic covalent organic framework material with flexible branched polymers (mCOF@ε-PL@THBA-Ti4+) built via an immobilized metal ion affinity chromatography (IMAC) enrichment strategy was proposed through post-synthesis modification. Hydrophilic ε-poly-L-lysine (ε-PL) rich in amino active groups was first introduced in the fabrication of the phosphopeptide enrichment material to increase the hydrophilicity while providing more functional modification pathways of the material. 2,3,4-Trihydroxy-benzaldehyde (THBA) provides abundant binding sites for the immobilization of numerous Ti4+, which is advantageous for the subsequent efficient phosphopeptide enrichment. The magnetic nanocomposite exhibited outstanding performance of phosphopeptide enrichment with good selectivity (1 : 5000), a low detection limit (2 fmol), and relatively high loading capacity (66.7 mg g-1). What's more, after treatment with mCOF@ε-PL@THBA-Ti4+, 16 endogenous phosphopeptides from fresh saliva of healthy people were recognized by MALDI-TOF MS, and 50 phosphopeptides belonging to 35 phosphoproteins from the serum of uremia patients were detected by nano-LC-MS/MS. Proteomics data analysis for the differential protein selection between uremia and normal controls was conducted using R software, and four down-regulated and three up-regulated proteins were obtained. The results suggested that the prepared material has potential applications in biomarker discovery.

Polymerization strategy for cellulose nanocrystals-based photonic crystal films with water resisting property.

Cellulose nanocrystals (CNCs) can form a liquid crystal film with a chiral nematic structure by evaporative-induced self-assembly (EISA). It has attracted much attention as a new class of photonic liquid crystal material because of its intrinsic, unique structural characteristics, and excellent optical properties. However, the CNCs-based photonic crystal films are generally prepared via the physical crosslinking strategy, which present water sensitivity. Here, we developed CNCs-g-PAM photonic crystal film by combining free radical polymerization and EISA. FT-IR, SEM, POM, XRD, TG-DTG, and UV-Vis techniques were employed to characterize the physicochemical properties and microstructure of the as-prepared films. The CNCs-g-PAM films showed a better thermo-stability than CNCs-based film. Also, the mechanical properties were significantly improved, viz., the elongation at break was 9.4 %, and tensile strength reached 18.5 Mpa, which was a much better enhancement than CNCs-based film. More importantly, the CNCs-g-PAM films can resist water dissolution for more than 24 h, which was impossible for the CNCs-based film. The present study provided a promising strategy to prepare CNCs-based photonic crystal film with high flexibility, water resistance, and optical properties for applications such as decoration, light management, and anti-counterfeiting.

Effect of iron salt type and dosing mode on Fenton-based pretreatment of rice straw for enzymatic hydrolysis.

Fenton-based processes with four different iron salts in two different dosing modes were used to pretreat rice straw (RS) samples to increase their enzymatic digestibility. The composition analysis shows that the RS sample pretreated by the dosing mode of iron salt adding into H2O2 has a much lower hemicellulose content than that pretreated by the dosing mode of H2O2 adding into iron salt, and the RS sample pretreated by the chloride salt-based Fenton process has a much lower lignin content and a slightly lower hemicellulose content than that pretreated by the sulphate salt-based Fenton process. The higher concentration of reducing sugar observed on the RS sample with lower lignin and hemicellulose contents justifies that the Fenton-based process could enhance the enzymic hydrolysis of RS by removing hemicellulose and lignin and increasing its accessibility to cellulase. FeCl3·6H2O adding into H2O2 is the most efficient Fenton-based process for RS pretreatment.

Ultrasound-assisted alkaline pretreatment for enhancing the enzymatic hydrolysis of rice straw by using the heat energy dissipated from ultrasonication.

Rice straw samples were exposed to ultrasound-assisted alkaline (NaOH) pretreatment by using the heat energy dissipated from ultrasonication to increase their enzymatic digestibility for saccharification. The characterization shows that the pretreatment could selectively remove lignin and hemicellulose without degrading cellulose, and increase porosity and surface area of rice straw. The porosity, surface area and cellulose content of rice straw increased with the increasing concentration of NaOH used. The rice straw sample pretreated by using the heat energy dissipated from ultrasonication has a higher surface area and a lower crystallinity index value than that pretreated by using the external source of heating, and the amount of reducing sugar released from the former sample at 48h of enzymatic saccharification, which is about 3.5 times as large as that from the untreated rice straw sample (2.91vs. 0.85gL-1), is slightly larger than that from the latter sample (2.91vs. 2.73gL-1). The ultrasound-assisted alkaline pretreatment by using the heat energy dissipated from ultrasonication was proved to be a reliable and effective method for rice straw pretreatment.