Association between the quality of plant-based diets and periodontitis in the U.S. general population.

AIM: To investigate the relationship between plant-based diet indices (PDIs) and periodontitis and serum IgG antibodies against periodontopathogens in the U.S. MATERIALS AND METHODS: We analysed cross-sectional data on 5651 participants ≥40 years of age from the Third National Health and Nutrition Examination Survey. Food frequency questionnaire data were used to calculate the overall PDI, healthy plant-based diet index (hPDI), and unhealthy plant-based diet index (uPDI). Periodontitis was defined using a half-reduced Centers for Disease Control and Prevention and American Academy of Periodontology case definition. Serum antibodies against 19 periodontopathogens were used to classify the population into two subgroups using hierarchical clustering. Survey-weighted multivariable logistic regressions were applied to assess the associations of PDI/hPDI/uPDI z-scores with periodontitis and hierarchical clusters after adjusting for potential confounders. RESULTS: A total of 2841 (50.3%) participants were defined as having moderate/severe periodontitis. The overall PDI z-score was not significantly associated with the clinical and bacterial markers of periodontitis. By considering the healthiness of plant foods, we observed an inverse association between hPDI z-score and periodontitis (odds ratio [OR] = 0.925, 95% confidence interval [CI]: 0.860-0.995). In contrast, higher uPDI z-score (adherence to unhealthful plant foods) might increase the risk of periodontitis (OR = 1.100; 95% CI: 1.043-1.161). Regarding antibodies against periodontopathogens, the participants in cluster 2 had higher periodontal antibodies than those in cluster 1. The hPDI z-score was positively associated with cluster 2 (OR = 1.192; 95% CI: 1.112-1.278). In contrast, an inverse association between uPDI z-score and cluster 2 was found (OR = 0.834; 95% CI: 0.775-0.896). CONCLUSIONS: Plant-based diets were associated with periodontitis, depending on their quality. A healthy plant-based diet was inversely related to an increased risk of periodontitis but positively related to elevated antibody levels against periodontopathogens. For an unhealthy plant-based diet, the opposite trends were observed.

Accuracy of autonomous robotic surgery for dental implant placement in fully edentulous patients: A retrospective case series study.

OBJECTIVES: This study evaluated the accuracy of dental implant placement using the robotic computer-assisted implant surgery (r-CAIS) technology in fully edentulous patients. MATERIALS AND METHODS: Fully edentulous and terminal dentition patients were enrolled for r-CAIS technology. Based on the cone-beam computed tomography (CBCT) examination, a customized positioning marker and a preoperative surgical plan were created before surgery. During the implant surgery, the implant osteotomy and placement were automatically performed using an autonomous robotic surgery system under the surgeon's supervision. A postoperative CBCT scan was used to determine the discrepancies between the planned and placed implants. RESULTS: Ten patients with 59 implants underwent autonomous robotic surgery. No adverse surgical events occurred. The deviations of global coronal, global apical, and angular were 0.67 ± 0.37 mm (95% CI: 0.58-0.77 mm), 0.69 ± 0.37 mm (95% CI: 0.59-0.78 mm), and 1.27° ± 0.59° (95% CI: 1.42°-1.11°), respectively. CONCLUSIONS: The autonomous r-CAIS technology proved an accurate surgical approach for implant placement in fully edentulous patients due to the control of the angular deviation. Autonomous robotic surgery seems promising as an accurate technology for treating fully edentulous patients. However, further trials are required to provide more hard clinical evidence.

One-Abutment at One-Time in Posterior Edentulism: A Systematic Review and Meta-Analysis.

OBJECTIVE: The objective of this systematic review and meta-analysis was to investigate the clinical significance of one-abutment at one-time protocol in healed posterior edentulism. METHODS: An online search was undertaken in November 2022, which included PubMed, Cochrane Library, Wiley Online Library, and Google Scholar in addition to manual searching. The Cochrane Collaboration tool was performed to assess the quality of selected articles. Marginal bone loss (MBL) was estimated by the performance of meta-analysis. Moreover, all the pooled analyses were based on random-effect models. Subgroup analysis was applied to evaluate the effects of different variables. RESULTS: In line with the inclusion criteria, 6 trials with 446 dental implants were identified. The meta-analysis showed a total of 0.22 mm less MBL within 6 months and decreased by 0.30 mm at 1-year follow-up in favor of one-abutment at one-time protocol. A significant loss MBL was found in implants placed equicrestally using one-abutment at one-time protocol [6 months: mean difference (MD): -0.22 mm; 95% CI, -0.34 to 0.10 mm, P =0.0004; 12 months: MD: -0.32 mm; 95% CI, -0.40 to -0.24 mm, P <0.00001), whereas no difference was found between 2 groups in an implant placed subscrestally (6 months: MD: 0.14 mm; 95% CI, -0.03 to 0.22 mm; P =0.11; 12 months: MD: -0.12 mm; 95% CI, -0.32 to 0.08 mm; P =0.23). CONCLUSIONS: Implant platform position might greatly affect the marginal bone level. Moreover, one-abutment at one-time protocol demonstrated better bone preservation in implants placed equicrestally in healed posterior edentulism. CLINICAL RELEVANCE: This study highlights the significant clinical application of one-abutment at one-time protocol in healed posterior edentulism.

Functional Biomaterials and Digital Technologies in Dentistry: From Bench to Bedside.

This Special Issue, "Functional Biomaterials and Digital Technologies in Dentistry: From Bench to Bedside", highlights the integration of advanced materials science and digital technologies in dental and maxillofacial applications [...].

Trephination-based autonomous robotic surgery for dental implant placement: A proof of concept.

OBJECTIVES: To present a novel drilling protocol of trephine osteotomy technique for autologous bone grafting with simultaneous implant placement using an autonomous robotic system. METHODS: The novel protocol consists of 1) preoperative procedures: marker fabrication and fixation, data acquisition, and preoperative planning; 2) intraoperative procedures: registration and calibration, and osteotomy and implant placement performed by an autonomous dental implant robot; 3) postoperative procedures: CBCT acquisition and accuracy assessment. RESULT: The protocol was an effective method for implant osteotomy, with no reported intraoperative complications. The implant surgery was successfully completed, and autogenous bone was obtained. Meanwhile, the accuracy of implant placement was clinically acceptable, with minor deviations. CONCLUSIONS: Trephination-based robotic surgery can be successfully implemented in implant osteotomy, which might replace freehand implant surgery and conventional drilling protocol. However, further clinical studies are necessary. CLINICAL SIGNIFICANCE: The main finding of this case is a potential alternative for preserving autogenous bone during implant surgery.

Post-processing of a 3D-printed denture base polymer: Impact of a centrifugation method on the surface characteristics, flexural properties, and cytotoxicity.

OBJECTIVES: To investigate the impact of a centrifugation method on the surface characteristics, flexural properties, and cytotoxicity of an additively manufactured denture base polymer. METHODS: The tested specimens were prepared by digital light processing (DLP). A centrifugation method (CENT) was used to remove the residual uncured resin. In addition, the specimens were post-processed with different post-rinsing solutions: isopropanol (IPA), ethanol (EtOH), and tripropylene glycol monomethyl ether (TPM), respectively. A commercial heat-polymerized polymethyl methacrylate was used as a reference (REF). First, the values of surface topography, arithmetical mean height (Sa), and root mean square height (Sq) were measured. Next, flexural strength (FS) and modulus were evaluated. Finally, cytotoxicity was assessed using an extract test. The data were statistically analyzed using a one-way analysis of variance, followed by Tukey's multiple comparison test for post-hoc analysis. RESULTS: The Sa value in the CENT group was lower than in the IPA, EtOH, TPM, and REF groups (p < 0.001). Moreover, the CENT group had lower Sq values than other groups (p < 0.001). The centrifugation method showed a higher FS value (80.92 ± 8.65 MPa) than the EtOH (61.71 ± 12.25 MPa, p < 0.001) and TPM (67.01 ± 9.751 MPa, p = 0.027), while affecting IPA (72.26 ± 8.80 MPa, p = 0.268) and REF (71.39 ± 10.44 MPa, p = 0.231). Also, the centrifugation method showed no evident cytotoxic effects. CONCLUSIONS: The surfaces treated with a centrifugation method were relatively smooth. Simultaneously, the flexural strength of denture base polymers was enhanced through centrifugation. Finally, no evident cytotoxic effects could be observed from different post-processing procedures. CLINICAL SIGNIFICANCE: The centrifugation method could optimize surface quality and flexural strength of DLP-printed denture base polymers without compromising cytocompatibility, offering an alternative to conventional rinsing post-processing.

Effect of post-curing conditions on surface characteristics, physico-mechanical properties, and cytotoxicity of a 3D-printed denture base polymer.

OBJECTIVE: This study aims to investigate the influence of post-polymerization (post-curing) conditions on surface characteristics, flexural properties, water sorption and solubility, and cytotoxicity of additively manufactured denture base materials. METHODS: The tested specimens were additively manufactured using digital light processing and classified into different post-curing condition groups: submerged in water (WAT), submerged in glycerin (GLY), and air exposure (AIR). An uncured specimen (UNC) was used as a control. The surface topography and roughness were observed. The flexural strength and modulus were determined via a three-point bending test. The water sorption and solubility were subsequently tested. Finally, an extract test was performed to assess cytotoxicity. RESULTS: Different post-curing conditions had no significant effects on the surface topography and roughness (Sa value). Various post-curing conditions also had no significant effects on the flexural strength. Notably, the flexural modulus of the WAT group (2671.80 ± 139.42 MPa) was significantly higher than the AIR group (2197.47 ± 197.93 MPa, p = 0.0103). After different post-curing conditions, the water sorption and solubility of the specimens met the ISO standards. Finally, all post-curing conditions effectively reduced cytotoxic effects. SIGNIFICANCES: Post-curing with different oxygen levels improved flexural properties, and flexural modulus significantly increased after the specimens were submerged in water. In addition, water sorption and solubility, and cytocompatibility were optimized by post-curing, irrespective of the post-curing conditions. Therefore, the water-submerged conditions optimized the flexural modulus of the 3D-printed denture base materials.

The quality of life after keratinized mucosa augmentation around dental implants using xenogenic collagen matrix with or without stent.

BACKGROUND: The substitution of missing teeth with implants is a dependable and anticipated therapeutic approach. Despite numerous studies affirming long-term success rates, there exists a spectrum of potential biological and aesthetic complications. OBJECTIVE: The primary objective of this study was to assess patient responses subsequent to surgical interventions, with a specific emphasis on the utilization of xenogenic collagen matrix (XCM), both with and without the application of a stent secured over healing abutments, in the context of keratinized gingival mucosa augmentation. The principal aim was to evaluate and draw comparisons between the clinical outcomes resulting from these two procedural approaches, with a particular focus on critical parameters encompassing post-operative complications, patient comfort, and the overall efficacy in achieving successful keratinized tissue augmentation. methods: Sixty patients were selected for this study. The patients were divided into three groups: A, B, and a control group, with each group comprising 20 participants. We used XCM in experimental group A, XCM covered with surgical stent in experimental group B, and free gingival graft (FGG) in the control group. After the surgical procedure, patients were required to complete a visual analogue scale (VAS) questionnaire for post-operative complications, and a quality of life (QOL) questionnaire on days 1, 3, and 7. RESULTS: Patients in the experimental groups A and B demonstrated markedly improved outcomes when compared with the control group. Assessments conducted on days 1, 3, and 7 demonstrated diminished levels of pain, bleeding, and swelling in both experimental groups, with experimental group B showing the least discomfort. The incorporation of XCM, either with or without stents, was associated with a reduction in analgesic consumption, underscoring its favorable influence on post-operative comfort, notwithstanding the exception of halitosis in experimental group B. CONCLUSION: Using XCM with or without a stent for keratinized tissue augmentation has better post-operative outcomes associated with reduced swelling, bleeding, and pain based on the QOL survey. This study provides data to support the clinical application of XCM and stents.

Sex differences in the association between dual-energy x-ray absorptiometry-measured body composition and periodontitis.

BACKGROUND: A positive association between obesity based on body mass index (BMI) and periodontitis has been reported. Fat tissue-related systemic inflammation acts as the link to periodontal comorbidities of obesity. However, the BMI is unable to distinguish fat and fat-free tissues. More precise measures are required to evaluate body composition, including fat and fat-free tissues. This study aimed to determine the sex differences in the association between dual-energy x-ray absorptiometry (DXA)-measured body composition (i.e., fat mass and muscle mass) and phenotypes with periodontitis. METHODS: Cross-sectional data of 3892 participants from the National Health and Nutrition Examination Survey (NHANES) study 2011‒2014 were analyzed. Adiposity indices (fat mass index [FMI] and percentage body fat [%BF]) and muscle mass index (MMI) were calculated. The participants were categorized by the quintiles of FMI, MMI, and %BF. Body composition phenotypes were categorized as: low adiposity-low muscle (LA-LM), low adiposity-high muscle (LA-HM), high adiposity-low muscle (HA-LM), or high adiposity-high muscle (HA-HM), respectively. Periodontitis was defined by the CDC/AAP (Centers for Disease Control and Prevention/American Academy of Periodontology) criteria. Multivariable logistic regression analysis was conducted, stratified by sex. We further adjusted for white blood cell (WBC) counts in the sensitivity analysis. RESULTS: Restricted cubic splines revealed non-linear associations between body composition indices and periodontitis risk. Women with a higher FMI (odds ratio for Q5 vs. Q1 [ORQ5vs1] = 1.787, 95% confidence interval: 1.209-2.640) or %BF (ORQ5vs1 = 2.221, 1.509-3.268) had increased odds of periodontitis. In addition, women with HA-LM phenotype were more likely to develop periodontitis (OR = 1.528, 1.037-2.252). Interestingly, the WBC count, a systemic inflammatory biomarker, attenuated these associations. No statistically significant associations were found in men. CONCLUSIONS: The association between DXA-measured body composition and phenotypes with periodontitis differs per sex. Only in women higher adiposity indices and HA-LM phenotype were associated with an increased risk of periodontitis.

Predictive factors for the treatment success of peri-implantitis: a protocol for a prospective cohort study.

INTRODUCTION: Peri-implantitis, a common biological complication of dental implant, has attracted considerable attention due to its increasing prevalence and limited treatment efficacy. Previous studies have reported several risk factors associated with the onset of peri-implantitis (eg, history of periodontitis, poor plaque control and smoking). However, inadequate data are available on the association between these risk factors and successful outcome after peri-implantitis therapy. This prospective cohort study aims to identify the local and systemic predictive factors for the treatment success of peri-implantitis. METHODS AND ANALYSIS: A single-centre cohort study will be conducted by recruiting 275 patients diagnosed with peri-implantitis. Sociodemographic variables, healthy lifestyles and systemic disorders will be obtained using questionnaires. In addition, clinical and radiographic examinations will be conducted at baseline and follow-up visits. Treatment success is defined as no bleeding on probing on more than one point, no suppuration, no further marginal bone loss (≥0.5 mm) and probing pocket depth ≤5 mm at the 12-month follow-up interval. After adjustment for age, sex and socioeconomic status, potential prognostic factors related to treatment success will be identified using multivariable logistic regression models. ETHICS AND DISSEMINATION: This cohort study in its current version (2.0, 15 July 2022) is in accordance with the Declaration of Helsinki and was approved by the Ethics Committee of Stomatological Hospital, Southern Medical University (EC-CT-(2022)34). The publication will be on behalf of the study site. TRIAL REGISTRATION NUMBER: ChiCTR2200066262.

Influence of additive manufacturing method and build angle on the accuracy of 3D-printed palatal plates.

OBJECTIVES: In this in vitro study, the effects of additive manufacturing (AM) methods and build angles on the trueness and precision of 3D-printed palatal plate orthodontic appliances for newborns and infants were examined. METHODS: Specimens were fabricated by different representative AM methods, including digital light processing (DLP), fused filament fabrication (FFF), and MultiJet printing (MJP). Three build angles (0°, 45°, and 90°) were used. After scanning, all specimens were analyzed using the 3D inspection software. The root mean square values were measured for trueness and precision. Color maps were created to detect deviations in samples. The data were statistically analyzed with a two-way ANOVA. RESULTS: The trueness and precision were statistically influenced by both AM methods and build angles (p < 0.05). Moreover, the root mean square values of the 45° DLP (0.0221 ± 0.0017 µm) and the 0° MJP (0.0217 ± 0.0014 µm) were significantly lower compared to those in other groups (p < 0.001). CONCLUSIONS: AM methods (DLP, FFF, and MJP) and build angles (0°, 45°, and 90°) significantly impacted the dimensional accuracy of additively manufactured palatal plate orthodontic appliances. Also, the 45° DLP and the 0° MJP were associated with the highest trueness and precision. CLINICAL SIGNIFICANCE: All tested AM methods with different build angles yielded clinically acceptable outcomes (within an acceptance range of ±300 µm for trueness), achieving the highest accuracy with a technology-specific suitable build angle.

Accuracy of autonomous robotic surgery for single-tooth implant placement: A case series.

OBJECTIVES: This study aimed to investigate the accuracy of the autonomous robotic computer-assisted implant surgery (r-CAIS) for single-tooth implant placement. METHODS: Patients with a single missing tooth were enrolled for the autonomous robotic implant surgery. The patients underwent a cone-beam computed tomography (CBCT) scan with a positioning marker. Virtual preoperative implant placement and a drilling plan were created before surgery. The robotic system automatically performed the implant osteotomy and placement intraoperatively under the surgeon's supervision. A postoperative CBCT scan was performed to evaluate the deviations between the planned and placed implants. RESULTS: Ten patients with single dental implant placement were enrolled. No adverse surgical events and postoperative complications (i.e., infection and early implant failure) were reported. The autonomous robotic implant surgery exhibited a mean overall coronal deviation of 0.74 mm (95% CI: 0.53 to 0.94 mm), a mean overall apical deviation of 0.73 mm (95% CI: 0.53 to 0.93 mm), and an angular deviation of 1.11° (95% CI: 0.78 to 1.44°), respectively. CONCLUSIONS: The high accuracy of autonomous r-CAIS technology in single-tooth implant placement was attributed to the control of the angular deviation and axial errors. CLINICAL SIGNIFICANCE: The main findings of this study provide significant evidence to support the autonomous robotic implant surgery system as a potential alternative in dental implant surgery.

Automatic segmentation of inferior alveolar canal with ambiguity classification in panoramic images using deep learning.

Background: Manual segmentation of the inferior alveolar canal (IAC) in panoramic images requires considerable time and labor even for dental experts having extensive experience. The objective of this study was to evaluate the performance of automatic segmentation of IAC with ambiguity classification in panoramic images using a deep learning method. Methods: Among 1366 panoramic images, 1000 were selected as the training dataset and the remaining 336 were assigned to the testing dataset. The radiologists divided the testing dataset into four groups according to the quality of the visible segments of IAC. The segmentation time, dice similarity coefficient (DSC), precision, and recall rate were calculated to evaluate the efficiency and segmentation performance of deep learning-based automatic segmentation. Results: Automatic segmentation achieved a DSC of 85.7% (95% confidence interval [CI] 75.4%-90.3%), precision of 84.1% (95% CI 78.4%-89.3%), and recall of 87.7% (95% CI 77.7%-93.4%). Compared with manual annotation (5.9s per image), automatic segmentation significantly increased the efficiency of IAC segmentation (33 ms per image). The DSC and precision values of group 4 (most visible) were significantly better than those of group 1 (least visible). The recall values of groups 3 and 4 were significantly better than those of group 1. Conclusions: The deep learning-based method achieved high performance for IAC segmentation in panoramic images under different visibilities and was positively correlated with IAC image clarity.

Mediating role of systemic inflammation in the association between heavy metals exposure and periodontitis risk.

BACKGROUND: This study evaluated the mediating role of systemic inflammation in the association between exposure to heavy metals and periodontitis in a nationwide sample of adults. METHODS: Pooled cross-sectional data from the National Health and Nutrition Examination Survey (NHANES 2009-2014) were used (n = 8993). Periodontitis was defined by a full-mouth examination and classified as no/mild and moderate/severe (mod/sev) groups. Blood and urinary heavy metal levels were investigated, including cadmium (Cd), lead (Pb), and mercury (Hg). In addition, systemic inflammation was assessed using circulatory leukocyte counts and C-reactive protein (CRP) levels. RESULTS: Multivariable logistic regression analysis revealed the positive associations of blood and urinary levels of Cd and Pb with mod/sev periodontitis. In contrast,blood Hg levels did not show a significant association. The odds of having periodontitis were 1.233 and 1.311 times higher for each one-unit increment in Ln-transformed blood Cd (95% confidence interval [CI]: 1.109-1.371) and Pb (95% CI: 1.170-1.470), respectively. Mediation analysis suggested a 6.3% to 11.5% contribution of leucocyte counts in the association of blood Cd and Pb levels with periodontitis. Sensitivity analyses for urinary Cd levels yielded consistent mediating effects. However, no significant mediating effect of CRP was detected. CONCLUSION: Higher exposures to Cd and Pb were positively associated with periodontitis risk. These associations might be partially mediated by the elevated levels of leukocytes rather than CRP. Further longitudinal studies are needed to elucidate the discordant results of the systemic inflammatory biomarkers.

Autonomous Robotic Surgery for Immediately Loaded Implant-Supported Maxillary Full-Arch Prosthesis: A Case Report.

Robotic systems have emerged in dental implant surgery due to their accuracy. Autonomous robotic surgery may offer unprecedented advantages over conventional alternatives. This clinical protocol was used to show the feasibility of autonomous robotic surgery for immediately loaded implant-supported full-arch prostheses in the maxilla. This case report demonstrated the surgical protocol and outcomes in detail, highlighting the pros and cons of the autonomous robotic system. Within the limitations of this study, autonomous robotic surgery could be a feasible alternative to computer-assisted guided implant surgery.

The role of titanium surface micromorphology in MG-63 cell motility during osteogenesis.

Different surface micromorphologies influence osteoblast movements and impact the osteogenesis around implants. In this study, a biomimetic chip that simulates the microenvironment of the implant and bone in vitro was developed (tissue-on-chip of group T and group C) to study the correlation of cell movement velocity (CMV), direction (CMD), acceleration (CMA), and cell attachment number (CA) with the surface micromorphology of the Titanium material. Computational fluid dynamics (CFD) was used for flow analysis. Changes in intraosseous pressure (IOP), local blood perfusion index (LBPI), new bone microstructure, microvessel density (MVD), and bone-implant contact (BIC) in beagle dogs were detected as implant surface alterations. Surface skewness (Ssk) and surface arithmetic mean height (Sa) were the most important negative factors for high CMV, accounting for 51% and 32%, respectively, of all the influencing factors. Higher Ssk (SskT > 0, SskC < 0) and Sa (SaT > SaC) resulted in lower CMV (CMVT:CMVC = 0.41:1), greater CA (CAT:CAC = 1.44:1), and higher BIC (BICT:BICC = 3.06:1) (P < 0.05). The surface micromorphology influenced the CMD of MG-63 cells within 20 µm from the material surface. However, it could not regulate the IOP, LBPI, MVD, new bone microstructure, or CMD (P > 0.05).

Influence of P(VDF-TrFE) Membranes with Different Surface Potentials on the Activity and Angiogenic Function of Human Umbilical Vein Endothelial Cells.

During bone tissue regeneration, neovascularization is critical, and the formation of a blood supply network is crucial for bone growth stimulation and remodeling. Previous studies suggest that bioelectric signals facilitate the process of angiogenesis. Owing to their biomimetic electroactivity, piezoelectric membranes have garnered substantial interest in the field of guided bone regeneration. Nevertheless, the knowledge of their influence due to varying surface potentials on the progression of angiogenesis remains ambiguous. Therefore, we proposed the preparation of an electroactive material, P(VDF-TrFE), and investigated its effects on the activity and angiogenic functions of human umbilical vein endothelial cells (HUVECs). The HUVECs were directly cultured on P(VDF-TrFE) membranes with different surface potentials. Subsequently, cell viability, proliferation, migration, tube formation, and expressions of related factors were assessed through appropriate assays. Our results revealed that the negative surface potential groups exerted differential effects on the modulation of angiogenesis in vitro. The P(VDF-TrFE) membranes with negative surface potential exhibited the greatest effect on cellular behaviors, including proliferation, migration, tube formation, and promotion of angiogenesis by releasing key factors such as VEGF-A and CD31. Overall, these results indicated that the surface potential of piezoelectric P(VDF-TrFE) membranes could exert differential effects on angiogenesis in vitro. We present a novel approach for designing bioactive materials for guided bone regeneration.

Post-processing of DLP-printed denture base polymer: Impact of a protective coating on the surface characteristics, flexural properties, cytotoxicity, and microbial adhesion.

OBJECTIVES: To investigate the effect of a protective coating on the surface characteristics, flexural properties, cytotoxicity, and microbial adhesion of vat-photopolymerization additive-manufacturing denture base polymers. METHODS: The specimens were additively manufactured using digital light processing (DLP). Specimen surfaces were coated with the same printed resin, and mechanical polishing was used for comparison. Surface topography, arithmetical mean height (Sa), and water contact angle values were measured. Furthermore, flexural strength (FS)/modulus and fractography were evaluated. Also, cytotoxicity was evaluated by an extract test. Finally, an adhesion test was used to investigate the adhesion of mixed oral bacteria to the specimens. RESULTS: The Sa values in the polished (0.26 ± 0.08 µm) and coated (0.38 ± 0.14 µm) groups were significantly lower than in the untreated (2.21 ± 0.42 µm) and control (2.01 ± 0.37 µm) groups. The coating treatment resulted in a higher FS compared to the untreated surface (p = 0.0002). After the coating treatment, no significant differences were found in relative cell viability between the groups (p > 0.05). The quantitative results showed significantly higher bacterial adhesion in the untreated group than in the polished (p = 0.0047) and coated (p < 0.0001) groups. SIGNIFICANCE: The surface characteristics and flexural properties were optimized by the protective coating. Also, the protective coating did not adversely affect cytocompatibility. Moreover, the coating treatment could effectively decrease oral bacteria adhering to the surfaces. Therefore, the protective coating treatment can be a less time-consuming alternative to mechanical polishing as a post-processing procedure for the digital denture.

Denture wearing status, cardiovascular health profiles, and mortality in edentulous patients: A prospective study with a 27-year follow-up.

OBJECTIVES: Life's Simple 7 (LS7) metrics provide insight into improving cardiovascular health (CVH) and help reduce mortality risks. Edentulous older adults have a higher mortality risk than dentulous ones, probably due to worse oral function. It is reported that wearing dentures will decrease the mortality risk factor by improving oral function. This prospective study aimed to investigate if denture wearing could modify the association between CVH profile and mortality risk among edentulous elderly. METHODS: From the Third National Health and Nutrition Examination Survey (NHANES III), 1,735 edentulous older adults (mean age 69.4 years old) with CVH profiles and data on denture wearing status were selected for this study. CVH profiles according to LS7 metrics were classified into poor, intermediate, or ideal. Denture wearers were defined as those wearing complete dentures in both arches all the time or only when awake. Multivariable Cox proportional-hazards regression was conducted to estimate the association of CVH profiles with all-cause and cardiovascular mortality. Stratified analyses and the testing of interaction terms were used to evaluate the difference between the association in edentulous patients with and without dentures. RESULTS: A total of 1,420 (81.8%) older adults died during the 27-year follow-up, with 478 (27.6%) cases attributable to heart disease. After controlling for potential confounders, edentulous patients with an ideal CVH (LS7 = 10-14) had a lower mortality risk than those with poor CVH (LS7 = 0-4). Furthermore, we observed an effect modification by denture use (Pinteraction = 0.046), with the role of ideal CVH in mitigating mortality among the denture wearers (Hazard Ratio = 0.440 [0.329-0.588]), while no significant association among those without dentures. Similar results were achieved for cardiovascular mortality, but there was no effect modification of denture use (Pinteraction = 0.352). CONCLUSION: In this study, a favorable cardiovascular health profile presents a protective effect on all-cause mortality only among edentulous patients wearing dentures instead of non-wearer. CLINICAL SIGNIFICANCE: Denture usage could improve oral function (e.g., chewing, smiling, speaking, etc.) and promote general health. Effect modification found in this study indicates having ideal CVH alone cannot substantially reduce mortality risk among edentulous patients. Therefore, health care professionals should keep an eye on the elderly not wearing dentures as they are probably more at risk for adverse health outcomes. It remains unclear if denture wearing has a causal relation with lower mortality risks, and further research is needed.

Periodontitis and cognitive impairment in older adults: The mediating role of mitochondrial dysfunction.

BACKGROUND: Increased attention has been focused on the associations of periodontal disease with the onset and progression of cognitive impairment. Although the associations are likely to be multifactorial, few studies have explored the role of mitochondrial dysfunction in the periodontitis-dementia link. METHODS: Cross-sectional data of 1,883 participants aged ≥60 years in the National Health and Nutrition Examination Survey 2011-2014 were analyzed. The following data were collected: 1) general information on sociodemographic, behavioral, and health-related factors; 2) periodontal status (mean attachment loss [AL] and mean probing depth [PD]); 3) mitochondrion-derived biomarker of mitochondrial dysfunction (blood sample concentration of methylmalonic acid [MMA]); 4) cognitive function (Consortium to Establish a Registry for Alzheimer's disease immediate recall [CERAD-IR] and delay recall [CERAD-DR], animal fluency test, and digit symbol substitution test [DSST]). Mediation analysis weighted for complex survey design was used to assess the effect of MMA on the association of periodontal status with cognitive function after adjusting for potential confounders. RESULTS: Participants with Stage III and IV periodontitis had lower scores on cognitive performance and higher MMA levels than those with Stages I/II periodontitis. Circulating MMA was significantly associated with CERAD-DR (weighted ß [SE] = -0.076 [0.011]) and DSST (weighted ß [SE] = -0.039 [0.009]), which mediated 9.9% and 6.0% of the total association of mean PD with cognitive function. Moreover, MMA mediated 11.7% and 5.8% of the association of mean AL with CERAD-DR and DSST, respectively. CONCLUSION: The findings suggest that MMA, a biomarker of mitochondrial dysfunction, plays a mediating role in the link between periodontitis and cognitive impairment in older adults aged ≥60 years.