Dietary emulsifier polysorbate 80 exposure accelerates age-related cognitive decline.

Gut microbial homeostasis is crucial for the health of cognition in elderly. Previous study revealed that polysorbate 80 (P80) as a widely used emulsifier in food industries and pharmaceutical formulations could directly alter the human gut microbiota compositions. However, whether long-term exposure to P80 could accelerate age-related cognitive decline via gut-brain axis is still unknown. Accordingly, in this study, we used the senescence accelerated mouse prone 8 (SAMP8) mouse model to investigate the effects of the emulsifier P80 intake (1 % P80 in drinking water for 12 weeks) on gut microbiota and cognitive function. Our results indicated that P80 intake significantly exacerbated cognitive decline in SAMP8 mice, along with increased brain pathological proteins deposition, disruption of the blood-brain barrier and activation of microglia and neurotoxic astrocytes. Besides, P80 intake could also induce gut microbiota dysbiosis, especially the increased abundance of secondary bile acids producing bacteria, such as Ruminococcaceae, Lachnospiraceae, and Clostridium scindens. Moreover, fecal microbiota transplantation from P80 mice into 16-week-old SAMP8 mice could also exacerbated cognitive decline, microglia activation and intestinal barrier impairment. Intriguingly, the alterations of gut microbial composition significantly affected bile acid metabolism profiles after P80 exposure, with markedly elevated levels of deoxycholic acid (DCA) in serum and brain tissue. Mechanically, DCA could activate microglial and promote senescence-associated secretory phenotype production through adenosine triphosphate-binding cassette transporter A1 (ABCA1) importing lysosomal cholesterol. Altogether, the emulsifier P80 accelerated cognitive decline of aging mice by inducing gut dysbiosis, bile acid metabolism alteration, intestinal barrier and blood brain barrier disruption as well as neuroinflammation. This study provides strong evidence that dietary-induced gut microbiota dysbiosis may be a risk factor for age-related cognitive decline.

Characteristics of microplastics in the atmosphere of Anyang City.

In order to clarify the characteristics of microplastics in the atmosphere of Anyang city, TSP, PM10, and PM2.5 samples are collected when the ambient air quality is good, slightly polluted, and severely polluted. After pretreatment, the physical and chemical characteristics are observed and identified by using stereomicroscope and micro-infrared spectrometer. The results show that the average abundance of microplastics is 0.19 items/m3, 0.26 items/m3, and 0.42 items/m3, respectively, when the ambient air quality is good, light pollution, and heavy pollution in Anyang City. It can be seen that with the decline of ambient air quality, the average abundance of microplastics in TSP, PM2.5, and PM10 gradually increases. The black fiber strip microplastics account for about 80% of the total TSP, PM2.5, and PM10 in the ambient air of Anyang City, followed by yellow flake and black granular microplastics and a small amount of green, red, and blue fiber strip microplastics. AQI has a good correlation with the abundance of microplastics in TSP, PM10, and PM2.5, and the maximum microplastic trapping effect could be obtained according to the sampling method of PM2.5 in the ambient air. The main components of microplastics are cellophane, followed by PET and EVA. The explorations of human respiratory exposure risk assessment show that with the increase of AQI, the daily intake of microplastics in adults also increased. At high levels of pollution, the human body breathes an average of 222 ± 5 microplastics per day.

Evaluation of cytosine base editing and adenine base editing as a potential treatment for alpha-1 antitrypsin deficiency.

Alpha-1 antitrypsin deficiency (AATD) is a rare autosomal codominant disease caused by mutations within the SERPINA1 gene. The most prevalent variant in patients is PiZ SERPINA1, containing a single G > A transition mutation. PiZ alpha-1 antitrypsin (AAT) is prone to misfolding, leading to the accumulation of toxic aggregates within hepatocytes. In addition, the abnormally low level of AAT secreted into circulation provides insufficient inhibition of neutrophil elastase within the lungs, eventually causing emphysema. Cytosine and adenine base editors enable the programmable conversion of C⋅G to T⋅A and A⋅T to G⋅C base pairs, respectively. In this study, two different base editing approaches were developed: use of a cytosine base editor to install a compensatory mutation (p.Met374Ile) and use of an adenine base editor to mediate the correction of the pathogenic PiZ mutation. After treatment with lipid nanoparticles formulated with base editing reagents, PiZ-transgenic mice exhibited durable editing of SERPINA1 in the liver, increased serum AAT, and improved liver histology. These results indicate that base editing has the potential to address both lung and liver disease in AATD.

Synthesis, Crystal Structures and Luminescence Properties of Three New Cadmium 3D Coordination Polymers.

: The new rigid planar ligand 2,5-bis(3-(pyridine-4-yl)phenyl)thiazolo[5,4-d]thiazole (BPPT) has been synthesized, which is an excellent building block for assembling coordination polymer. Under solvothermal reaction conditions, cadmium ion with BPPT in the presence of various carboxylic acids including (1,1'-biphenyl)-4,4'-dicarboxylic acid (BPDC), isophthalic acid (IP), and benzene-1,3,5-tricarboxylic acid (BTC) gave rise to three coordination complexes, viz, [Cd(BPPT)(BPDA)](BPPT)n (1), [Cd(BPPT) (IP)] (CH3OH) (2), and [Cd3(BPPT)3(BTC)2(H2O)2] (3). The structures of 1, 2, and 3 were characterized by single crystal X-ray diffraction. The IR spectra as well as thermogravimetric and luminescence properties were also investigated. Complex 1 is a two-dimensional (2D) network and further stretched to a 3D supramolecular structure through π-π stacking interaction. The complexes 2 and 3 show 3D framework. The complexes 1, 2, and 3 exhibited luminescence property at room temperature.

[Prediction of Cellulose, Hemicellulose, Lignin and Ash Content of Four Miscanthus Bio-Energy Crops Using Near-Infrared Spectroscopy].

Biomass energy is being industrialized rapidly in China in recent years, whereas, research on energy grass is still in primary stage. Only if near-infrared spectroscopy mode was constructed which was used to predict the lignin, cellulose and hemicellulose contents in energy crop, the varieties screening, performance evaluation and on-line control of industrialization would be facilitated. In this study, the prediction model for quality indices (cellulose, hemicellulose, lignin and ash) of four energy grass (Miscanthus) was built using Fourier transform near-infrared (FT-NIR) spectroscopy combined with partial least squares regression (PLSR), and the impacts exerted by particle size on the model were also revealed. The results showed that (1) the root mean error of cross validation (RMSECV) of cellulose, hemicelluloses and lignin contents were 1.35% (R = 0.88), 0.39% (R = 0.91) and 0.35 (R2 = 0.80), respectively in stalk and 0.72% (R = 0.88), 0.85% (R2 = 0.85) and 0.44 (R2 = 0.87), respectively in leaf. The model showed good performance in prediction of corresponding contents in unknown samples, however, no satisfying performance in ash content. (2) Both 2 mm and 0.5 mm grades of particle size can meet accuracy requirements of the model. But considering the time and labor cost, 2 mm grade was suggested for model building.

Adsorption characteristics of ciprofloxacin hydrochloride on polystyrene microplastics in freshwater.

In order to reveal the adsorption mechanism of microplastics (MPs) on antibiotics, polystyrene (PS) was chosen as a typical microplastic, Fenton and high-temperature aging methods were used to obtain aged MPs particles. The adsorption behavior and mechanism of ciprofloxacin hydrochloride (CIP) on PS before and after aging were studied by batch adsorption experiments, and other influencing environmental conditions were evaluated concurrently. The results showed that the adsorption of CIP on PS was an exothermic reaction, the pseudo-second-order model and Freundlich isothermal models could fit the adsorption of CIP on PS. Aging treatment enhanced the adsorption capacity of PS to CIP, and Fenton aging for 7 days had the best effect. The highest adsorption was observed when the solution pH was 6. The adsorption capacity of microplastics gradually decreased with increasing ionic strength and the concentration of fulvic acid, while the aging microplastics changed little with the concentration of fulvic acid. The presence of both Cu (II) and CIP inhibits the adsorption of each other on microplastics. Based on the above findings, the adsorption of CIP on PS is dominated by physical adsorption, and electrostatic interactions and hydrogen bonding interactions are also important mechanisms for the adsorption of CIP on microplastics.

Establishment of a mandible defect model in rabbits infected with multiple bacteria and bioinformatics analysis.

Objective: A model of chronic infectious mandibular defect (IMD) caused by mixed infection with Staphylococcus aureus and Pseudomonas aeruginosa was established to explore the occurrence and development of IMD and identify key genes by transcriptome sequencing and bioinformatics analysis. Methods: S. aureus and P. aeruginosa were diluted to 3 × 108 CFU/mL, and 6 × 3 × 3 mm defects lateral to the Mandibular Symphysis were induced in 28 New Zealand rabbits. Sodium Morrhuate (0.5%) and 50 µL bacterial solution were injected in turn. The modeling was completed after the bone wax closed; the effects were evaluated through postoperative observations, imaging and histological analyses. Gene Ontology (GO), Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway, and protein‒protein interaction (PPI) network analyses were performed to investigate the function of the differentially expressed genes (DEGs). Results: All rabbits showed characteristics of infection. The bacterial cultures were positive, and polymerase chain reaction (PCR) was used to identify S. aureus and P. aeruginosa. Cone beam CT and histological analyses showed inflammatory cell infiltration, pus formation in the medullary cavity, increased osteoclast activity in the defect area, and blurring at the edge of the bone defect. Bioinformatics analysis showed 1,804 DEGs, 743 were upregulated and 1,061 were downregulated. GO and KEGG analyses showed that the DEGs were enriched in immunity and osteogenesis inhibition, and the core genes identified by the PPI network were enriched in the Hedgehog pathway, which plays a role in inflammation and tissue repair; the MEF2 transcription factor family was predicted by IRegulon. Conclusion: By direct injection of bacterial solution into the rabbit mandible defect area, the rabbit chronic IMD model was successfully established. Based on the bioinformatics analysis, we speculate that the Hedgehog pathway and the MEF2 transcription factor family may be potential intervention targets for repairing IMD.

Selective recovery of nickel from stainless steel pickling sludge with NH3-(NH4)2CO3 leaching system.

The recovery of valuable metals from stainless steel pickling sludge(SSPS) has great economic and environmental benefits. In this study, a new method is proposed for selective recovery of nickel from SSPS by NH3-(NH4)2CO3 ammonia leaching system. The Eh-pH diagram was used to analyze Ni, Fe, Cr leaching behavior during the ammonia leaching process. Nickel can be leached as the complex [Ni(NH3)n]2+, whereas Fe and Cr remain as precipitates in the leaching slag. The effects of NH3·H2O concentration, liquid-solid ratio, reaction temperature, and reaction time on the leaching efficiency of nickel in the ammonia leaching system were analyzed and optimized by single-factor study and response surface analysis, and the kinetics were analyzed. The optimal conditions for Ni leaching were found to be 28.28 min, 54.07 °C, a liquid-solid ratio of 23.7:1, and NH3·H2O concentration of 5.10 mol/L. Each factor had a greater effect on the rate of Ni leaching in the following order: liquid-solid ratio > NH3·H2O concentration > leaching time > leaching temperature. The ammonia leaching recovery system was controlled by chemical reaction and the activation energy was 58.17 KJ/mol. The results of scanning electron microscopy-energy dispersion spectrum (SEM-EDS), x-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) show that the leaching slag was in granular form with agglomerated particles and particle size of approximately 2.8 µm The major components of the leaching slag were Fe(OH)3, Fe2O3, Fe(OH)2, Cr(OH)3, and Cr2O3. Therefore, this study provides a new and effective way of using the resources of SSPS.

Recent advances in micro (nano) plastics in the environment: Distribution, health risks, challenges and future prospects.

Environmental micro(nano)plastics have become a significant global pollution problem due to the widespread use of plastic products. In this review, we summarized the latest research advances on micro(nano)plastics in the environment, including their distribution, health risks, challenges, and future prospect. Micro(nano)plastics have been found in a variety of environmental media, such as the atmosphere, water bodies, sediment, and especially marine systems, even in remote places like Antarctica, mountain tops, and the deep sea. The accumulation of micro(nano)plastics in organisms or humans through ingestion or other passive ways poses a series of negative impacts on metabolism, immune function, and health. Moreover, due to their large specific surface area, micro(nano)plastics can also adsorb other pollutants, causing even more serious effects on animal and human health. Despite the significant health risks posed by micro(nano)plastics, there are limitations in the methods used to measure their dispersion in the environment and their potential health risks to organisms. Therefore, further research is needed to fully understand these risks and their impacts on the environment and human health. Taken together, the challenges of micro(nano)plastics analysis in the environment and organisms must be addressed, and future research prospects need to be identified. Governments and individuals must take action to reduce plastic waste and minimize the negative impact of micro(nano)plastics on the environment and human health.

Proof of Concept for Sustainable Manufacturing of Neural Electrode Array for In Vivo Recording.

Increasing requirements for neural implantation are helping to expand our understanding of nervous systems and generate new developmental approaches. It is thanks to advanced semiconductor technologies that we can achieve the high-density complementary metal-oxide-semiconductor electrode array for the improvement of the quantity and quality of neural recordings. Although the microfabricated neural implantable device holds much promise in the biosensing field, there are some significant technological challenges. The most advanced neural implantable device relies on complex semiconductor manufacturing processes, which are required for the use of expensive masks and specific clean room facilities. In addition, these processes based on a conventional photolithography technique are suitable for mass production, which is not applicable for custom-made manufacturing in response to individual experimental requirements. The microfabricated complexity of the implantable neural device is increasing, as is the associated energy consumption, and corresponding emissions of carbon dioxide and other greenhouse gases, resulting in environmental deterioration. Herein, we developed a fabless fabricated process for a neural electrode array that was simple, fast, sustainable, and customizable. An effective strategy to produce conductive patterns as the redistribution layers (RDLs) includes implementing microelectrodes, traces, and bonding pads onto the polyimide (PI) substrate by laser micromachining techniques combined with the drop coating of the silver glue to stack the laser grooving lines. The process of electroplating platinum on the RDLs was performed to increase corresponding conductivity. Sequentially, Parylene C was deposited onto the PI substrate to form the insulation layer for the protection of inner RDLs. Following the deposition of Parylene C, the via holes over microelectrodes and the corresponding probe shape of the neural electrode array was also etched by laser micromachining. To increase the neural recording capability, three-dimensional microelectrodes with a high surface area were formed by electroplating gold. Our eco-electrode array showed reliable electrical characteristics of impedance under harsh cyclic bending conditions of over 90 degrees. For in vivo application, our flexible neural electrode array demonstrated more stable and higher neural recording quality and better biocompatibility as well during the 2-week implantation compared with those of the silicon-based neural electrode array. In this study, our proposed eco-manufacturing process for fabricating the neural electrode array reduced 63 times of carbon emissions compared to the traditional semiconductor manufacturing process and provided freedom in the customized design of the implantable electronic devices as well.

Recent advances in understanding the biochemical and molecular mechanism of diabetic cardiomyopathy.

Cardiovascular complications account for significant morbidity and mortality in the diabetic population. Diabetic cardiomyopathy (DCM), a prominent cardiovascular complication, has been recognized as a microvascular disease that may lead to heart failure. During the past few decades, research progress has been made in investigating the pathophysiology of the disease; however, the exact molecular mechanism has not been elucidated, making therapeutic a difficult task. In this review article, we have discussed a number of diabetes-induced metabolites such as glucose, advanced glycation end products, protein kinase C, free fatty acid and oxidative stress and other related factors that are implicated in the pathophysiology of the DCM. An understanding of the biochemical and molecular changes especially early in the DCM may lead to new and effective therapies toward prevention and amelioration of DCM, which is important for the millions of individuals who already have or are likely to develop the disease before a cure becomes available.

Adsorption properties and influencing factors of Cu(II) on polystyrene and polyethylene terephthalate microplastics in seawater.

As an emerging contamination in the ocean, microplastics can act as effective vectors of pollutants, the ecological risks caused by the combined pollution of microplastics and other pollutants have attracted growing attention. In this work, Copper (Cu(II)) was chosen as the classic pollutant, polystyrene (PS) and polyethylene terephthalate (PET) pellets were used as the typical marine microplastics, the adsorption performance of Cu(II) on PS and PET beads was investigated by adsorption kinetics and isotherm experiments, and other influencing conditions, such as pH, salinity, coexisting heavy metals ions and aging treatment, were evaluated. The results indicated that the adsorption behavior of Cu(II) on PS and PET was spontaneous and endothermic in the simulated seawater environment, and the batch experimental data can be effectively described by pseudo-second-order model and Freundlich isothermal model. Besides, the adsorption capacity of microplastics for Cu(II) was the best at pH 7, the change of salinity had no obvious effect on the adsorption in the natural marine environment. Moreover, co-existence of lead (Pb(II)) exhibited evident impacts on Cu(II) sorption onto PS and PET, which confirmed the adsorption competition effect between them. Additionally, high temperature aging treatment of microplastics in different environments for different duration time could obviously affect the properties of microplastics. It was found that the microplastics after being exposed to high temperature environment in the air for 168 h showed relatively stronger adsorption amount for Cu(II). In summary, these findings suggested that electrostatic interaction and distributed diffusion mechanisms may be the main mechanisms of adsorption, while no new functional groups were generated after the adsorption, indicating that physisorption may dominate the adsorption performance of PS and PET pellets for Cu(II). This study provides supplementary insights into the role of microplastics as carriers of heavy metals in the marine environment.

Concrescence of maxillary second molar and impacted third molar: A case report.

BACKGROUND: Morphological anomalies of teeth, including talon cusp, dens evaginatus, gemination, fusion, concrescence, root dilaceration, and taurodontism, always involve changes in the enamel, cementum and dentin. Diagnosing concrescent teeth through routine clinical examination alone is difficult, and most cases of concrescence are found accidentally during extraction. A definite preoperative diagnosis of concrescence would contribute to a better treatment plan and fewer undesirable complications. CASE SUMMARY: A 47-year-old woman who complained of left maxillary first molar loss for half a year presented to our department seeking treatment by dental implant restoration. Panoramic radiography and cone-beam computed tomography (CBCT) showed an unclear boundary between the distal root of the second molar and the mesial root of the third molar. The teeth were extracted under local anesthesia, and a definite diagnosis of concrescence was made by histopathological examination. CONCLUSION: CBCT is a useful tool for diagnosing and planning the management of tooth concrescence and may be beneficial for reducing unnecessary complications.

Invasive intracranial aspergillosis in an immunocompetent patient after dental extraction.

Invasive intracranial aspergillosis in immunocompetent patients remains a rarity. We report such a case in a male who developed symptoms after a dental extraction. Attention should be paid to atypical central nervous system symptoms after dental procedures; early diagnosis and management are of great importance to improve outcomes.

Single and combined effects of phenanthrene and polystyrene microplastics on oxidative stress of the clam (Mactra veneriformis).

Toxicity of single organic pollutants or microplastics on organisms have been reported widely, however, their combined toxicity on bivalves was rarely investigated. In this paper, single and combined effects of phenanthrene (Phe, 20 µg·L-1 and 50 µg·L-1) and polystyrene (PS, 17 µm and 150 µm with 1 mg·L-1) microplastics on oxidative stress of the clam Mactra veneriformis were assayed under laboratory conditions with biomarkers including superoxide dismutase (SOD), glutathione-S-transferase (GST) and malondialdehyde (MDA). We found that Phe or PS single stress source could induce oxidative stress to clams. Besides, exposed to Phe 50 µg·L-1 or PS 150 µm caused the reduced expression of SOD and GST activities, leading to potential oxidative injury in clams. At each Phe concentration level, the order of single and combined toxicity on clams was Phe + PS 150 µm > Phe ≈ Phe + PS 17 µm. Phe exhibited a stronger toxic effect on clams than PS. Under joint exposure stress, the toxicity influence of Phe is still dominant. Furthermore, MDA and GST could be considered the most sensitive oxidative stress biomarkers in clams under Phe or PS single and combined exposures, respectively.

Assessing POR and CYB5R1 oxidoreductase-mediated oxidative rupture of PUFA in liposomes.

Lipid peroxidation of polyunsaturated fatty acid (PUFA) phospholipids induces necrotic cell death through compromised cell membrane integrity during ferroptosis. We established assays to investigate oxidoreductase-mediated oxidative rupture, specifically via NADPH-cytochrome P450 reductase (POR) and NADH-cytochrome b5 reductase (CYB5R1), of PUFA phospholipids in artificially generated protein-free liposomes. Liposome breakage was detected via Tb3+ liposome release and electron microscopy liposome morphology imaging. This protocol was also applied to other oxidoreductases with analogous functions and investigation of ferroptotic membrane damage in cell-free systems. For complete details on the use and execution of this protocol, please refer to Yan et al. (2020).

A sheep in wolf's clothing: Elaphe xiphodonta sp. nov. (Squamata, Colubridae) and its possible mimicry to Protobothrops jerdonii.

Based on combined morphological and osteological characters and molecular phylogenetics, we describe a new species of the genus Elaphe that was discovered from the south slope of the Qinling Mountains, Shaanxi, China, namely Elaphe xiphodonta sp. nov. It is distinguished from the other congeners by a combination of the following characters: dorsal scales in 21-21-17 rows, the medial 11 rows keeled; 202-204 ventral scales, 67-68 subcaudals; two preoculars (including one subpreocular); two postoculars; two anterior temporals, three posterior temporals; reduced numbers of maxillary teeth (9+2) and dentary teeth (12); sharp cutting edges on the posterior or posterolateral surface of the rear maxillary teeth and dentary teeth; dorsal head yellow, three distinct markings on the head and neck; a distinct black labial spot present in supralabials; dorsum yellow, 46-49 complete (or incomplete) large black-edged reddish brown blotches on the body and 12-19 on the tail, two rows of smaller blotches on each ventrolateral side; ventral scales yellow with mottled irregular black blotches, a few irregular small red spots dispersed on the middle of the ventral. Based on molecular phylogenetic analyses, the new species forms the sister taxon to E. zoigeensis. The discovery of this new species increases the number of the recognized species in the genus Elaphe to 17.

A mitogenomic perspective on the ancient, rapid radiation in the Galliformes with an emphasis on the Phasianidae.

BACKGROUND: The Galliformes is a well-known and widely distributed Order in Aves. The phylogenetic relationships of galliform birds, especially the turkeys, grouse, chickens, quails, and pheasants, have been studied intensively, likely because of their close association with humans. Despite extensive studies, convergent morphological evolution and rapid radiation have resulted in conflicting hypotheses of phylogenetic relationships. Many internal nodes have remained ambiguous. RESULTS: We analyzed the complete mitochondrial (mt) genomes from 34 galliform species, including 14 new mt genomes and 20 published mt genomes, and obtained a single, robust tree. Most of the internal branches were relatively short and the terminal branches long suggesting an ancient, rapid radiation. The Megapodiidae formed the sister group to all other galliforms, followed in sequence by the Cracidae, Odontophoridae and Numididae. The remaining clade included the Phasianidae, Tetraonidae and Meleagrididae. The genus Arborophila was the sister group of the remaining taxa followed by Polyplectron. This was followed by two major clades: ((((Gallus, Bambusicola) Francolinus) (Coturnix, Alectoris)) Pavo) and (((((((Chrysolophus, Phasianus) Lophura) Syrmaticus) Perdix) Pucrasia) (Meleagris, Bonasa)) ((Lophophorus, Tetraophasis) Tragopan))). CONCLUSIONS: The traditional hypothesis of monophyletic lineages of pheasants, partridges, peafowls and tragopans was not supported in this study. Mitogenomic analyses recovered robust phylogenetic relationships and suggested that the Galliformes formed a model group for the study of morphological and behavioral evolution.