Design and construction of chemical-biological module clusters for degradation and assimilation of poly(ethylene terephthalate) waste.

The rising accumulation of poly(ethylene terephthalate) (PET) waste presents an urgent ecological challenge, necessitating an efficient and economical treatment technology. Here, we developed chemical-biological module clusters that perform chemical pretreatment, enzymatic degradation, and microbial assimilation for the large-scale treatment of PET waste. This module cluster included (i) a chemical pretreatment that involves incorporating polycaprolactone (PCL) at a weight ratio of 2% (PET:PCL = 98:2) into PET via mechanical blending, which effectively reduces the crystallinity and enhances degradation; (ii) enzymatic degradation using Thermobifida fusca cutinase variant (4Mz), that achieves complete degradation of pretreated PET at 300 g/L PET, with an enzymatic loading of 1 mg protein per gram of PET; and (iii) microbial assimilation, where Rhodococcus jostii RHA1 metabolizes the degradation products, assimilating each monomer at a rate above 90%. A comparative life cycle assessment demonstrated that the carbon emissions from our module clusters (0.25 kg CO2-eq/kg PET) are lower than those from other established approaches. This study pioneers a closed-loop system that seamlessly incorporates pretreatment, degradation, and assimilation processes, thus mitigating the environmental impacts of PET waste and propelling the development of a circular PET economy.

Smart Responsive Microneedles for Controlled Drug Delivery.

As an emerging technology, microneedles offer advantages such as painless administration, good biocompatibility, and ease of self-administration, so as to effectively treat various diseases, such as diabetes, wound repair, tumor treatment and so on. How to regulate the release behavior of loaded drugs in polymer microneedles is the core element of transdermal drug delivery. As an emerging on-demand drug-delivery technology, intelligent responsive microneedles can achieve local accurate release of drugs according to external stimuli or internal physiological environment changes. This review focuses on the research efforts in smart responsive polymer microneedles at home and abroad in recent years. It summarizes the response mechanisms based on various stimuli and their respective application scenarios. Utilizing innovative, responsive microneedle systems offers a convenient and precise targeted drug delivery method, holding significant research implications in transdermal drug administration. Safety and efficacy will remain the key areas of continuous efforts for research scholars in the future.

Synergistic biodegradation of poly(ethylene terephthalate) using Microbacterium oleivorans and Thermobifida fusca cutinase.

Poly(ethylene terephthalate) (PET) is a major source of plastic pollution. Biodegradation technologies are of paramount interest in reducing or recycling PET waste. In particular, a synergistic microbe-enzyme treatment may prove to be a promising approach. In this study, a synergistic system composed of Microbacterium oleivorans JWG-G2 and Thermobifida fusca cutinase (referred to as TfC) was employed to degrade bis(hydroxyethyl) terephthalate (BHET) oligomers and a high crystalline PET film. A novel degradation product that was obtained by M. oleivorans JWG-G2 treatment alone was identified as ethylene glycol terephthalate (EGT). With the addition of TfC as a second biocatalyst, the highest synergy degrees for BHET oligomers and PET film degradation were 2.79 and 2.26, respectively. The largest amounts of terephthalic acid (TPA) and mono(2-hydroxyethyl) terephthalate (MHET) (47 nM and 330 nM, respectively) were detected after combined treatment of PET film with M. oleivorans JWG-G2 at 5 × 103 µL/cm2 and TfC at 120 µg/cm2, and the degree of PET film surface destruction was more significant than those produced by each treatment alone. The presence of extracellular PET hydrolases in M. oleivorans JWG-G2, including three carboxylesterases, an esterase and a lipase, was predicted by whole genome sequencing analysis, and a predicted PET degradation pathway was proposed for the synergistic microbe-enzyme treatment. The results indicated that synergistic microbe-enzyme treatment may serve as a potentially promising tool for the future development of effective PET degradation. KEY POINTS: • An ecofriendly synergistic microbe-enzyme PET degradation system operating at room temperature was first introduced for degrading PET. • A novel product (EGT) was first identified during PET degradation. • Potential PET hydrolases in M. oleivorans JWG-G2 were predicted by whole genome sequencing analysis.

Three-Dimensional Objects Consisting of Hierarchically Assembled Nanofibers with Controlled Alignments for Regenerative Medicine.

Assembling electrospun nanofibers with controlled alignment into three-dimensional (3D), complex, and predesigned shapes has proven to be a difficult task for regenerative medicine. Herein, we report a novel approach inspired by solids of revolution that transforms two-dimensional (2D) nanofiber mats of a controlled thickness into once-inaccessible 3D objects with predesigned shapes. The 3D objects are highly porous, consisting of layers of aligned nanofibers separated by gaps ranging from several micrometers to several millimeters. Upon compression, the objects are able to recover their original shapes. The porous objects can serve as scaffolds, guiding the organization of cells and producing highly ordered 3D tissue constructs. Additionally, subcutaneous implantation in rats demonstrates that the 3D objects enable rapid cell penetration, new blood vessel formation, and collagen matrix deposition. This new class of 3D hierarchical nanofiber architectures offers promising advancements in both in vitro engineering of complex 3D tissue constructs/models or organs and in vivo tissue repair and regeneration.

Camelliibacillus cellulosilyticus gen. nov., sp. nov., a cellulose-degrading bacterium isolated from tea.

A Gram-stain-positive, oxidase- and catalase-positive, endospore-forming, aerobic, non-motile and rod-shaped bacterium (THG-YT1T) was isolated from green tea. Growth occurred at 10-40 °C (optimum, 25-30 °C), at pH 6-8 (optimum, 7) and at 0-2 % NaCl (optimum, 0 %). Based on 16S rRNA gene sequences, phylogenetic analyses showed that strain THG-YT1T formed a distinct lineage with respect to closely related genera in the family Bacillaceae. Strain THG-YT1T was most closely related to the genera within the families Pullulanibacillus, Scopulibacillus, Tuberibacillus and Caenibacillu, with levels of 16S rRNA gene sequence similarity to the type species of members of these genera of less than 95.0 %. The menaquinone was MK-7. The polar lipids were phosphatidylethanolamine, two unidentified aminophospholipids, two unidentified aminolipids and two unidentified glycolipids. The major fatty acids of strain THG-YT1T were C18 : 3ω7c and anteiso-C17 : 0. The cell-wall peptidoglycan type was A1γ with meso-diaminopimelic acid as the diagnostic diamino acid plus alanine and glutamic acid. The cell-wall sugar was glucose. The DNA G+C content of strain THG-YT1T was determined to be 53.5 mol%. Based on the data presented here, strain THG-YT1T represents a novel species of a new genus of the family Bacillaceae, for which the name Camelliibacillus cellulosilyticus gen. nov., sp. nov. is proposed. The type strain is Camelliibacillus cellulosilyticus THG-YT1T(=KACC 19471T=CGMCC 1.16306T).

Scopulibacillus cellulosilyticus sp. nov., a cellulose-degrading bacterium isolated from tea.

A Gram-stain positive, aerobic, non-motile, endospore-forming and rod-shaped strain (THG-NT9T) was isolated from a green tea sample. Growth occurred at 20-45 °C (optimum 28-35 °C), at pH 6.0-8.0 (optimum 7.0) and at 0-2.0% NaCl (optimum 0%). Based on 16S rRNA gene sequence analysis, the near phylogenetic neighbours of strain THG-NT9T were identified as Scopulibacillus daqui DSM 28236T (98.6%), Scopulibacillus darangshiensis DSM 19377T (97.4%), Pullulanibacillus pueri CGMCC 1.12777T (96.7%) and Pullulanibacillus camelliae CGMCC 1.15371T (96.3%). The DNA G + C content of strain THG-NT9T was determined to be 47.5 mol %. DNA-DNA hybridization values between strain THG-NT9T and S. daqui DSM 28236T, S. darangshiensis DSM 19377T, P. pueri CGMCC 1.12777T, P. camelliae CGMCC 1.15371T and Pullulanibacillus naganoensis DSM 10191T were 41.3 ± 0.1 (39.4 ± 0.4% reciprocal analysis), 39.1 ± 0.1 (37.3 ± 0.1%), 21.4 ± 0.7 (20.1 ± 0.3%), 20.7 ± 0.1 (20.1 ± 0.4%) and 12.1 ± 0.2% (8.3 ± 0.2%). The polar lipids were identified as diphosphatidylglycerol, phosphatidylglycerol, phosphatidylethanolamine and three unidentified lipids. The quinone was identified as MK-7. The major fatty acids were C18:3 ω7c, iso-C15:0, iso-C16:0, iso-C17:0 and anteiso-C17:0. The cell wall type was determined to be A1γ peptidoglycan with meso-diaminopimelic acid as the diagnostic diamino acid plus alanine and glutamic acid and glucose as the cell wall sugar. On the basis of the phylogenetic analysis, chemotaxonomic data, physiological characteristics, and DNA-DNA hybridization data, strain THG-NT9T represents a novel species of the genus Scopulibacillus, for which the name Scopulibacillus cellulosilyticus sp. nov. is proposed. The type strain is THG-NT9T (= KCTC 33918T = CGMCC 1.16305T).

Mechanically-Guided Deterministic Assembly of 3D Mesostructures Assisted by Residual Stresses.

Formation of 3D mesostructures in advanced functional materials is of growing interest due to the widespread envisioned applications of devices that exploit 3D architectures. Mechanically guided assembly based on compressive buckling of 2D precursors represents a promising method, with applicability to a diverse set of geometries and materials, including inorganic semiconductors, metals, polymers, and their heterogeneous combinations. This paper introduces ideas that extend the levels of control and the range of 3D layouts that are achievable in this manner. Here, thin, patterned layers with well-defined residual stresses influence the process of 2D to 3D geometric transformation. Systematic studies through combined analytical modeling, numerical simulations, and experimental observations demonstrate the effectiveness of the proposed strategy through ≈20 example cases with a broad range of complex 3D topologies. The results elucidate the ability of these stressed layers to alter the energy landscape associated with the transformation process and, specifically, the energy barriers that separate different stable modes in the final 3D configurations. A demonstration in a mechanically tunable microbalance illustrates the utility of these ideas in a simple structure designed for mass measurement.

Controlled mechanical buckling for origami-inspired construction of 3D microstructures in advanced materials.

Origami is a topic of rapidly growing interest in both the scientific and engineering research communities due to its promising potential in a broad range of applications. Previous assembly approaches of origami structures at the micro/nanoscale are constrained by the applicable classes of materials, topologies and/or capability of control over the transformation. Here, we introduce an approach that exploits controlled mechanical buckling for autonomic origami assembly of 3D structures across material classes from soft polymers to brittle inorganic semiconductors, and length scales from nanometers to centimeters. This approach relies on a spatial variation of thickness in the initial 2D structures as an effective strategy to produce engineered folding creases during the compressive buckling process. The elastic nature of the assembly scheme enables active, deterministic control over intermediate states in the 2D to 3D transformation in a continuous and reversible manner. Demonstrations include a broad set of 3D structures formed through unidirectional, bidirectional, and even hierarchical folding, with examples ranging from half cylindrical columns and fish scales, to cubic boxes, pyramids, starfish, paper fans, skew tooth structures, and to amusing system-level examples of soccer balls, model houses, cars, and multi-floor textured buildings.

Significantly reduced radiation dose to operators during percutaneous vertebroplasty using a new cement delivery device.

BACKGROUND: Percutaneous vertebroplasy (PVP) might lead to significant radiation exposure to patients, operators, and operating room personnel. Therefore, radiaton exposure is a concern. The aim of this study was to present a remote control cement delivery device and study whether it can reduce dose exposue to operators. METHODS: After meticulous preoperative preparation, a series of 40 osteoporosis patients were treated with unilateral approach PVP using the new cement delivery divice. We compared levels of fluoroscopic exposure to operator standing on different places during operation. group A: operator stood about 4 meters away from X-ray tube behind the lead sheet. group B: operator stood adjacent to patient as using conventional manual cement delivery device. RESULTS: During whole operation process, radiation dose to the operator (group A) was 0.10 ± 0.03 (0.07-0.15) µSv, group B was 12.09 ± 4.67 (10-20) µSv. a difference that was found to be statistically significant (P < 0.001) between group A and group B. CONCLUSION: New cement delivery device plus meticulous preoperative preparation can significantly decrease radiation dose to operators.

Unilateral Biplanar Screw-Rod Fixation Technique for the Treatment of Odontoid Fractures in Patients with Atlantoaxial Bone or Vascular Abnormalities.

OBJETIVE: This study aims to introduce the unilateral biplanar screw-rod fixation (UBSF) technique (a hybrid fixation technique: 2 sets of atlantoaxial screws were placed on the same side), which serves as a salvage method for traditional posterior atlantoaxial fixation. To summarize the indications of this technique and to assess its safety, feasibility, and clinical effectiveness in the treatment of odontoid fractures. METHODS: Patients with odontoid fractures were enrolled according to special criteria. Surgical duration and intraoperative blood loss were documented. Patients were followed up for a minimum of 12 months. X-ray and computerized tomography scans were conducted and reviewed at 1 day, and patients were asked to return for computerized tomography reviews at 3, 6, 9, and 12 months after surgery until fracture union. Recorded and compared the Neck Visual Analog Scale and Neck Disability Index presurgery and at 1 week and 12 months postsurgery. RESULTS: Between January 2016 and December 2022, our study enrolled 7 patients who were diagnosed with odontoid fractures accompanied by atlantoaxial bone or vascular abnormalities. All 7 patients underwent successful UBSF surgery, and no neurovascular injuries were recorded during surgery. Fracture union was observed in all patients, and the Neck Visual Analog Scale and Neck Disability Index scores improved significantly at 1 week and 12 months postoperative (P < 0.01). CONCLUSIONS: The UBSF technique has been demonstrated to be safe, feasible, and effective in treating odontoid fractures. In cases where the atlantoaxial bone or vascular structure exhibits abnormalities, it can function as a supplementary or alternative approach to the conventional posterior C1-2 fixation.

Complete degradation of PET waste using a thermophilic microbe-enzyme system.

Enzymatic degradation has been proposed as a suitable solution for addressing PET pollution, but approximately 10 % of PET is left as nonbiodegradable. Microbes can completely degrade PET at the gram level per year. Based on the complementary benefits of microbes and enzymes, a microbe-enzyme system was created to completely degrade PET. Here, a thermophilic microbe-enzyme (TME) system composed of Bacillus thermoamylovorans JQ3 and leaf-branch compost cutinase variant (ICCG) was used to demonstrate the synergistic degradation of PET, enabling 100 % degradation of PET waste at a high PET loading level (360 g/L). Six endogenous PET hydrolases of strain JQ3 were discovered by employing an ester bond hydrolysis function-first genome mining (EGM) strategy and first successfully expressed in E. coli. These hydrolases could release TPA as the final product from PET and preferentially degraded BHET instead of MHET. Of these, carboxylesterase 39_5 and ICCG could degrade PET in a synergistic manner to generate 50 µM of TPA, which was greater than the sum of the individual treatments. Finally, the degradation pathway of the TME system was speculated to include biofilm formation, PET degradation and utilization. The successful implementation of this study rendered a scale-up degradation feasible of PET at a lower cost.

Design of biodegradable polyurethanes and post-modification with long alkyl chains via inhibiting biofilm formation and killing drug-resistant bacteria for the treatment of wound bacterial infection.

The development of cationic polymers that simulate antimicrobial peptides to treat bacterial infections has received much research interest. In order to obtain polymers that can not only eradicate bacteria but also inhibit biofilm formation, without inducing bacterial drug resistance, a series of cationic polymers have been developed. Despite recent progress, the chemical structures of these polymers are stable, making them recalcitrant to biodegradation and metabolism within organisms, potentially inducing long-term toxicity. To overcome this limitation, herein, a novel strategy of designing biodegradable polyurethanes with tertiary amines and quaternary ammonium salts via condensation polymerization and post-functionalizing them is reported. These polymers were found to exhibit potent antibacterial activity against Staphylococcus aureus and Escherichia coli, effectively prevent the formation of Staphylococcus aureus biofilms, act quickly and effectively against bacteria and display no resistance after repeated use. In addition, the potent in vivo antibacterial effects of these antimicrobial polyurethanes in a mouse model with methicillin-resistant Staphylococcus aureus skin infection are demonstrated.

Controlled ambipolar-to-unipolar conversion in graphene field-effect transistors through surface coating with poly(ethylene imine)/poly(ethylene glycol) films.

A controlled ambipolar-to-unipolar (n-type) conversion, along with a maximum fourfold increase in the electron mobility, in graphene field-effect transistors (FETs) is achieved by coating the surface of graphene with a layer of a mixed polymer system, poly(ethylene imine) (PEI) in poly(ethylene glycol) (PEG). The PEG serves as a physisorption adhesion agent for the PEI. Both unipolar and ambipolar n-type doping can be realized by adjusting the thickness of PEI films atop the graphene channel. The observed phenomena are attributed to the doping/dedoping effects of the external PEI film. The study provides a guide to engineering graphene transport properties through chemical modifications.

A Breathable, Reusable, and Zero-Power Smart Face Mask for Wireless Cough and Mask-Wearing Monitoring.

We herein introduce a lightweight and zero-power smart face mask, capable of wirelessly monitoring coughs in real time and identifying proper mask wearing in public places during a pandemic. The smart face mask relies on the compact, battery-free radio frequency (RF) harmonic transponder, which is attached to the inner layer of the mask for detecting its separation from the face. Specifically, the RF transponder composed of miniature antennas and passive frequency multiplier is made of spray-printed silver nanowires (AgNWs) coated with a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) passivation layer and the recently discovered multiscale porous polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) substrate. Unlike conventional on-chip or on-board wireless sensors, the SEBS-AgNWs/PEDOT:PSS-based RF transponder is lightweight, stretchable, breathable, and comfortable. In addition, this wireless device has excellent resilience and robustness in long-term and repeated usages (i.e., repeated placement and removal of the soft transponder on the mask). We foresee that this wireless smart face mask, providing simultaneous cough and mask-wearing monitoring, may mitigate virus-transmissive events by tracking the potential contagious person and identifying mask-wearing conditions. Moreover, the ability to wirelessly assess cough frequencies may improve diagnosis accuracy for dealing with several diseases, such as chronic obstructive pulmonary disease.

Accelerated biodegradation of polyethylene terephthalate by Thermobifida fusca cutinase mediated by Stenotrophomonas pavanii.

Polyethylene terephthalate (PET) is a general plastic that produces a significant amount of waste due to its non-biodagradable properties. We obtained four bacteria (Stenotrophomonas pavanii JWG-G1, Comamonas thiooxydans CG-1, Comamonas koreensis CG-2 and Fulvimonas soli GM-1) that utilize PET as a sole carbon source through a novel stepwise screening and verification strategy. PET films pretreated with S. pavanii JWG-G1 exhibited weight loss of 91.4% following subsequent degradation by Thermobifida fusca cutinase (TfC). S. pavanii JWG-G1 was able to colonize the PET surface and maintain high cell viability (over 50%) in biofilm, accelerating PET degradation. Compared with PET films with no pretreatment, pretreatment with S. pavanii JWG-G1 caused the PET surface to be significantly rougher with greater hydrophilicity (contact angle of 86.3 ± 2° vs. 96.6 ± 2°), providing better opportunities for TfC to contact and act on PET. Our study indicates that S. pavanii JWG-G1 could be used as a novel pretreatment for efficiently accelerating PET biodegradation by TfC.

Bioinspired elastomer composites with programmed mechanical and electrical anisotropies.

Concepts that draw inspiration from soft biological tissues have enabled significant advances in creating artificial materials for a range of applications, such as dry adhesives, tissue engineering, biointegrated electronics, artificial muscles, and soft robots. Many biological tissues, represented by muscles, exhibit directionally dependent mechanical and electrical properties. However, equipping synthetic materials with tissue-like mechanical and electrical anisotropies remains challenging. Here, we present the bioinspired concepts, design principles, numerical modeling, and experimental demonstrations of soft elastomer composites with programmed mechanical and electrical anisotropies, as well as their integrations with active functionalities. Mechanically assembled, 3D structures of polyimide serve as skeletons to offer anisotropic, nonlinear mechanical properties, and crumpled conductive surfaces provide anisotropic electrical properties, which can be used to construct bioelectronic devices. Finite element analyses quantitatively capture the key aspects that govern mechanical anisotropies of elastomer composites, providing a powerful design tool. Incorporation of 3D skeletons of thermally responsive polycaprolactone into elastomer composites allows development of an active artificial material that can mimic adaptive mechanical behaviors of skeleton muscles at relaxation and contraction states. Furthermore, the fabrication process of anisotropic elastomer composites is compatible with dielectric elastomer actuators, indicating potential applications in humanoid artificial muscles and soft robots.

Directional-path modification strategy enhances PET hydrolase catalysis of plastic degradation.

Poly (ethylene terephthalate) (PET) is a widely used type of general plastic that produces a significant amount of waste due to its non-degradable properties. We propose a novel directional-path modification (DPM) strategy, involving positive charge amino acid introduction and binding groove remodeling, and apply it to Thermobifida fusca cutinase to enhance PET degradation. The highest value of PET degradation (90%) was achieved in variant 4Mz (H184S/Q92G/F209I/I213K), exhibiting values almost 30-fold that of the wild-type. We employed molecular docking, molecular dynamics simulations, and QM/MM MD for the degradation process of PET, accompanied by acylation and deacylation. We found that the distance of nucleophilic attack was reduced from about 4.6 Å in the wild type to 3.8 Å in 4Mz, and the free energy barrier of 4Mz dropped from 14.3 kcal/mol to 7.1 kcal/mol at the acylation which was the rate-limiting step. Subsequently, the high efficiency and universality of the DPM strategy were successfully demonstrated in LCC, Est119, and BhrPETase enhancing the degradation activity of PET. Finally, the highest degradation rate of the pretreated commercial plastic bottles had reached to 73%. The present study provides insight into the molecular binding mechanism of PET into the PET hydrolases structure and proposes a novel DPM strategy that will be useful for the engineering of more efficient enzymes for PET degradation.

[Effects of Land-use Conversion on Soil Nitrification and NO & N2O Emissions in Tropical China Under Different Moisture Conditions].

Rain and heat conditions are abundant in tropical areas, and rubber and tea are widely planted in this region; the nitrification process produces nitrate content, which is not conducive to the maintenance of nitrogen nutrients, and has negative environmental effects (nitrogen oxide emissions). The characteristics of soil nitrification rate and nitrogen oxide emission under different land use patterns remain unclear. An incubation experiment was conducted under the 5 a (T5) and 15 a (T15) tea plantation soils and the nearby typical rubber plantation (XJ) soils in Baisha county of Hainan province under two moisture contents (50% WFPS-L and 80% WFPS-H) for 71 d at 25℃. The results showed that:① after the rubber plantation was converted to a tea plantation, the net nitrification and soil NO and N2O emissions were significantly reduced under high moisture content. The overall trend was in the order of XJH>T15H>T5H, and the values of soil net nitrification and NO and N2O emissions were as high as 4.2 mg·(kg·d)-1, 1.4 mg·kg-1, and 14.3 mg·kg-1 in the XJH treatment, respectively. Under the low moisture content, soil NO emissions in tea field soil were significantly reduced relative to those in rubber plantation soil, N2O emissions had no significant difference among different treatments, and net nitrification had no significant difference between the XJ and T15 treatments. There was a significant positive correlation between NO emissions and net nitrification rate (P<0.01). ② The net nitrification of XJH was higher than that of XJL, but the net nitrification values under different moisture contents in tea field soil was in contrast to that in rubber plantation soil. The NO emissions of XJ and T15 under different moisture contents were consistent with the trend of net nitrification, and the high nitrification promoted NO emissions, whereas NO emissions of T5 were not significantly affected by moisture content. The high moisture content treatment significantly promoted N2O emissions relative to those under the low moisture content treatment. The results showed that SOM, TN, pH, and moisture content were the key factors affecting soil net nitrification rate, NO, and N2O emissions. The conversion of the rubber plantation to a tea plantation significantly reduced the net nitrification rate and negative impact on the environment under high moisture content.

A novel transfection method for eukaryotic cells using polyethylenimine coated albumin microbubbles.

Albumin microbubbles have been intensively studied for their application in gene delivery. However, with negative surface potential, albumin microbubbles hardly bind plasmid DNA, which might contribute to their low transgene efficiency. In this study, we developed polyethylenimine (PEI) coated albumin microbubbles (PAMB) which were prepared by sonicating the mixture of human albumin, PEI, polyethylene glycol and glucose. CHO cells, COS cells and 293T cells were transfected with PEI, PEI+albumin, PAMB and Lipofectamine 2000, respectively. Our results showed that the surface potential was elevated and PAMB could bind plasmid DNA. The transgene efficiency of PAMB was higher than PEI and PEI+albumin (P<0.05), and PAMB performed the same transgene effect as Lipofectamine 2000 did but with lower cytotoxicity than Lipofectamine 2000. Albumin microbubbles modified by PEI has high transgene efficiency and low cytotoxicity even without ultrasound medication, making it a useful non-virus gene delivery method in vitro.

Optimization of multi-residue method for targeted screening and quantification of 216 harmful chemicals in plastic children's toys by gas chromatography-tandem mass spectrometry analysis.

Herein, we report a multi-residue method based on dissolution-precipitation extraction combined with gas chromatography-tandem mass spectrometry (GC-MS/MS) analysis for targeted screening and quantification of 216 harmful chemicals in plastic children's toys. We established a spectrogram database containing the first-order mass spectra of all analytes and their second-order mass spectra at different collision energies. Good separation was attained in less than 60 min. As a simple and low-cost extraction method, dissolution-precipitation exhibited good recoveries for the analytes in the plastic samples. The matrix-matched standard curves were accurate for analyte quantification in specific plastics due to the solvent effects and matrix effects. The limits of quantification range were 0.1 mg/kg to 10 mg/kg. A wide linear range of 0.1-200 mg/kg was also observed, with r2≥0.9924. The average recoveries ranged from 63.9% to 137.6%, and the relative standard deviation (n = 6) varied from 0.6% to 13.2%. Finally, 31 ABS actual toys and 30 PVC actual toys were detected and 20 analytes with contents ranging from 0.4 mg/kg to 172 mg/kg and 30 analytes from 0.8 mg/kg to 141,030 mg/kg were discovered respectively.