Prevalence of dental caries in the first permanent molar and associated risk factors among sixth-grade students in São Tomé Island.

BACKGROUND: Dental caries is one of the most preventable oral diseases among children in developing countries. This study aims to estimate the prevalence and severity of dental caries in the first permanent molar and analyze the related risk factors among sixth-grade students in São Tomé Island. METHODS: A cross-sectional study with a stratified cluster sampling method was conducted on 1855 sixth-grade school children, mainly aged 11 to 14 years old, from 10 schools in 6 regions of São Tomé Island, from April 17 to June 27, 2021. Dental caries examination was performed by using the CAST criteria (DMFT) index, and the self-administered questionnaires about family background, oral hygiene, and relevant behaviors were collected. Multivariable logistic regression was used to study risk factors related to dental caries of the first permanent molar, and all data analyses were done using SPSS version 25. RESULTS: The prevalence of dental caries in the first permanent molar was 68.79%, without significant difference between gender, age, residence, and whether only child or not. The mean Decayed, Missing, and Filled Teeth (DMFT) index and mean Decayed, Missing, and Filled Surface (DMFS) index were 1.751 ± 1.514 and 3.542 ± 3.941, respectively. The rate of filling teeth was 5.50%, and Pit and Fissure Sealant (PFS) rate was 2.21%. The overall prevalence and DMFT index of dental caries of permanent teeth was 76.01% and 2.753 ± 4.569, respectively. The results of logistic regression analysis indicated that the frequency of candy/chocolate consumption (OR = 1.095) and fair self-assessment of dental health (OR = 1.354) were significantly associated with dental caries (P < 0.05). CONCLUSIONS: The high prevalence of dental caries in the first permanent molar was a public health issue among sixth-grade school children in São Tomé Island. The prevalence of dental caries, mean DMFT and DMFS scores were higher, while the rate of filling and PFS teeth were lower than the average score of other African countries. Thus, oral health education, implement oral health preaching to school children and their parents is crucial to prevent dental caries.

Colloidal photonic crystal array chip based on nanoparticle self-assembly on patterned hydrophobic surface for signal-enhanced fluorescent assay of adenosine.

A controllable approach for preparing a portable colloidal photonic crystal (CPC) array chip is presented. The approach was inspired by the confinement effect of nanoparticle self-assembly on patterned surface. Hydrophobic polydimethylsiloxane substrate with reproducible micro-region array was fabricated by soft-lithography. The substrate was employed as the patterned template for self-assembly of monodisperse polystyrene nanoparticles. The CPC units can be prepared in several minutes, and exhibit consistent reflection wavelength. By adjusting the size of polystyrene nanoparticles and the shape of micro-regions, CPC units with multiple structure, colors and geometries were obtained. The CPC array chip features fluorescence enhancement owing to the optical modulation capability of the periodic nanostructure of the self-assembled CPC. With the reflection wavelength (523 nm) of green CPC units overlapping the emission wavelength (520 nm, with excitation wavelength of 490 nm) of 6-carboxyfluorescein-labeled DNA probe, the fluorescence intensity increased more than 10-fold. For signal-amplified assay of adenosine, the concentration range of linear response was 5.0 × 10-5 mol L-1 to 1.0 × 10-3 mol L-1, and the limit of detection was 1.3 × 10-6 mol L-1. Because of the enhancement effect of photonic crystal, the fluorescence images were more readable from the CPC array chip, compared with those from the planar substrate. The chip has potential applications in multiplex determination with high-throughput via encoding strategy based on the tunable structure, color or geometric shape. Graphical abstractSchematic diagram of signal-enhanced fluorescent detection of adenosine based on the colloidal photonic crystal array chip (PDMS, polydimethylsiloxane; PS NPs, polystyrene nanoparticles; CPC, colloidal photonic crystal; GO, graphene oxide; FAM, 6-carboxyfluorescein).

Laboratory investigation of the microbiologically influenced corrosion (MIC) resistance of a novel Cu-bearing 2205 duplex stainless steel in the presence of an aerobic marine Pseudomonas aeruginosa biofilm.

The microbiologically influenced corrosion (MIC) resistance of a novel Cu-bearing 2205 duplex stainless steel (2205 Cu-DSS) against an aerobic marine Pseudomonas aeruginosa biofilm was investigated. The electrochemical test results showed that Rp increased and icorr decreased sharply after long-term immersion in the inoculation medium, suggesting that 2205 Cu-DSS possessed excellent MIC resistance to the P. aeruginosa biofilm. Fluorescence microscope images showed that 2205 Cu-DSS possessed a strong antibacterial ability, and its antibacterial efficiency after one and seven days was 7.75% and 96.92%, respectively. The pit morphology comparison after 14 days between 2205 DSS and 2205 Cu-DSS demonstrated that the latter showed a considerably reduced maximum MIC pit depth compared with the former (1.44 µm vs 9.50 µm). The experimental results suggest that inhibition of the biofilm was caused by the copper ions released from the 2205 Cu-DSS, leading to its effective mitigation of MIC by P. aeruginosa.

Combatting cyanobacteria: unraveling the potency of 316L-Cu stainless steel in inhibiting Microcystis aeruginosa growth.

Harmful algal blooms, particularly those of Microcystis aeruginosa, present significant ecological and health risks. To address this issue, this study utilized a custom static algal growth assessment apparatus to investigate the anti-algal performance of a copper-alloyed 316L stainless steel (SS), named 316L-Cu SS. This material was compared with traditional 316L SS, which is widely utilized in freshwater systems for its corrosion resistance. Algal growth dynamics were monitored through optical density (OD) and chlorophyll A concentration measurements. Notably, 316L-Cu SS exhibited superior inhibitory effects on Microcystis aeruginosa growth compared to 316L SS and control groups. Inductively coupled plasma mass spectrometry (ICP-MS) confirmed that the copper ion release from 316L-Cu SS played a critical role in this algal suppression, which interfered with photosynthesis, induced oxidative stress, and damaged algal cell membranes. In contrast, other metal ions (Ni, Cr, Fe) had a negligible impact on algal growth. The study highlights 316L-Cu SS as a promising material for mitigating harmful algal blooms, thereby offering potential benefits for both aquatic ecosystem conservation and public health protection.

The impact of alloying element Cu on corrosion and biofilms of 316L stainless steel exposed to seawater.

Copper-containing stainless steel (SS) has been reported to mitigate biofilms in industrial and clinical environments. However, the impact of copper released from copper-containing SS in natural seawater on biofilms and corrosion is still unclear. In this study, three kinds of 316L SS were immersed in natural seawater for 6 months, and the pitting depth decreased in the order: 316L-Cu SS (annealed) > 316L SS > 316L-Cu SS (aged). The biofilm thickness and number of sessile cells on the surface of 316L-Cu SS (annealed) and 316L SS were similar but notably greater than those of 316L-Cu SS (aged). Furthermore, the results of the community analysis indicated that the addition of copper in 316L-Cu SS (aged) reduced the diversity and richness of the microbial community, resulting in a significant reduction in the number of genera constituting the biofilms. Copper ions exhibit a broad-spectrum bactericidal effect, effectively reducing the abundance of dominant populations and microbial genera in the biofilms, thereby mitigating pitting corrosion induced by microorganisms. In addition, the PCoA scatter plot showed that time also played an important role in the regulation of microbial community structure.

The effect of high temperature aging on the corrosion resistance, mechanical property and antibacterial activity of Cu-2205 DSS.

The effects of high temperature aging on the corrosion resistance, mechanical property and antibacterial activity of a copper-bearing 2205 duplex stainless steel (Cu-2205 DSS) were investigated. The results from scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and EDS analysis showed that after aging the proportion of γ phase in microstructure was increased and new σ phase and copper-rich precipitates were formed. The mechanical properties including hardness and tensile and yield strengths of the aged Cu-2205 DSS were significantly enhanced compared to the solution-treated Cu-2205 DSS as well as the 2205 DSS. Electrochemical measurements including electrochemical impedance spectroscopy, potentiodynamic polarization curves and potentiostatic polarization scan were performed to evaluate the corrosion behavior of the Cu-2205 DSS. It was found that aging increased the uniform corrosion resistance but had slightly adverse effect on the pitting corrosion resistance. Additionally, the antibacterial performance of aged Cu-2205 DSS was significantly improved compared to the solution treated Cu-2205 DSS, which was attributed to the more release of copper ions from the matrix that killed the bacteria cells and inhibited the biofilm formation on the surface. The above results suggest that Cu-2205 DSS after high temperature aging revealed good mechanical property, antibacterial performance, and corrosion resistance, which will further expand the application of duplex stainless steel in marine engineering fields.

Inhibition efficiency of 304-Cu stainless steel against oral bacterial biofilm.

PURPOSE: This study aims to evaluate the antibacterial properties of 304 Cu-bearing stainless steel (SS) with different Cu contents (0, 2.5, 4.5 wt.%) against oral biofilms of Streptococcus mutans (S. mutans), Streptococcus sanguinis (S. sanguinis), and their mixture. METHODS: Bacterial biofilms on the surface of 304-Cu SS were characterized by plate counting, 4', 6-diamidino-2-phenylindole (DAPI) staining with aid of sanning electron microscopy (SEM) and 2, 3-bis (2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide inner salt (XTT). In addition, the inhibition zone method was also employed to evaluate the antibacterial properties of 304-Cu SS. Cell Counting Kit-8 (CCK-8) and flow cytometry were used to assess the cytotoxicity and apoptosis rate of 304-Cu SS, respectively. RESULTS: 304-4.5Cu SS could effectively inhibit the attachment, formation, activity, and metabolism of bacterial biofilm, possessing the best antibacterial properties exceeding 99.9% of antibacterial rate against S. mutans, S. sanguinis, and their mixture. The diameters of inhibition zones to S. mutans and S. sanguinis on the surface of 304-4.5Cu SS were 21.7 and 14.7 mm, respectively. The results of cell experiments in vitro showed that both 304-2.5Cu SS and 304-4.5Cu SS had no evident cytotoxicity with an identical grade 1. The apoptosis rate exhibited a gradually increased tendency with increase of the Cu content in 304 SS. CONCLUSIONS: 304-4.5Cu SS without cytotoxic effect on NIH3T3 cells has obvious antibacterial activity against S. mutans, S. sanguinis and their mixture. CLINICAL SIGNIFICANCE: The Cu-bearing stainless steel provides a new solution to be used as oral orthodontic devices for inhibiting oral microflora imbalance and enamel demineralization.

Surface Roughness of Cu-Bearing Stainless Steel Affects Its Contact-Killing Efficiency by Mediating the Interfacial Interaction with Bacteria.

Numerous studies have found that the surface topography affects the material antibacterial properties by reducing the attachment of bacteria on the surfaces without influencing the viability of the adhered cells. For Cu-bearing alloys with excellent contact-killing properties, bacterial adhesion on the surface is also accompanied by short-range interactions which regulate the toxic effects of the material surface against bacterial cells. Thus, the surface topography of Cu-bearing alloys, as an important factor dominating the exposure level of bacteria on the surfaces, should affect the subsequent contact-killing efficiency. In this work, our major focus was on the regulation mechanism of the surface features on the material-bacterial interactions. We correlated the surface properties including different surface roughnesses of Cu-bearing stainless steel (SS) with the bacterial damage pattern and attempted to clarify the role of surface roughness in mediating the contact-killing behavior of Cu-bearing SS. The results of both atomic force microscopy and scanning electron microscopy investigations showed that E. coli cells experienced the most rapid physical and mechanical damages after incubating with the diamond-polished Cu-bearing SS surface. The bacterial cells noticeably stiffened and the adhesion force significantly increased, as evidenced by force-distance curve measurements. Because of the enhanced hydrophobicity and higher surface potential of the diamond-polished surface, which strengthened the Lewis acid-base attractive forces and weakened the electrostatic barrier between the bacteria and the surface, a higher exposure surface for bacteria was generated. Furthermore, the contact-induced charge transfer, manifested by Cu ion burst release, and reactive oxygen species overexpression contribute to an efficient contact-killing process.

Contact Killing of Cu-Bearing Stainless Steel Based on Charge Transfer Caused by the Microdomain Potential Difference.

The addition of copper makes the Cu-bearing stainless steel (SS) possess excellent antibacterial properties. However, the antibacterial mechanism of the Cu-bearing SS is still not accurately understood and recognized. On the one hand, the concentration of released antibacterial Cu ions from its surface is insufficient to generate such an effect. On the other hand, due to the limited Cu content, the area of copper toxicity that can be contacted with bacteria is also much less than that of pure Cu. Therefore, the purpose of this study was to explore the way of bacterial inactivation caused by Cu-bearing SS from the view of the charge transfer. The results showed that the continuous and effective contact between bacteria and Cu-bearing SS is the key to induce the bacteria-killing effect so that the cathode electrons generated by the potential difference of the material microdomain can cause the proton depletion in the bacterial cells, thereby disturbing the respiratory chain and energy generation of the bacterial cells. The proton depletion reaction also catalyzed the conversion of Cu(II) into Cu(I). Cu(I) not only destroys the iron-sulfur protein but also undergoes the redox reaction with Cu(II) to produce reactive oxygen species, causing oxidative damage to cells, eventually accelerating the bacterial death.

Development of conjugate-by-conjugate structured nanoparticles for oral delivery of docetaxel.

In the current study, we developed interpolymer-complex structures composed of hydroxypropyl methylcellulose (HPMC) and chitosan knitted with d-α-tocopherol polyethylene glycol succinate (TPGS) to establish oral nanoparticle delivery systems that could keep the drug dose from releasing into the gastrointestinal tract for at least 6 h. Two kinds of nanoparticle formations based on the so-called conjugate-by-conjugate strategy were introduced in the study. In the first conjugate-by-conjugate structured nanoparticle formation, TPGS was conjugated with an HPMC-chitosan conjugate, followed by the drug loading process. In the second approach, the drug was loaded with TPGS directly and subsequently conjugated with the HPMC-chitosan conjugate. Beneficially, polyvinyl alcohol could act not only as a stabilizing agent but also as a crosslinking agent for the nanoparticles. This study created newly modified structures of HPMC and chitosan, altering their physicochemical properties that could then retard drug release. The nanoparticles were cytotoxic towards MDA-MB-231 breast cancer cells when docetaxel was loaded in the nanoparticles, particularly the nanoparticles produced in the second approach, demonstrating their ability to kill cancerous cells and their potential for further applications in cancer therapy. Additionally, when Caco-2 cells were used as an absorption model in a transport study, the nanoparticles in the second approach showed their capacity to increase drug permeability across the monolayers of Caco-2 cells compared to the free-drug solution. This study also illustrated the enhanced uptake of the nanoparticles by the Caco-2 cells, implying enhanced absorption through the intestine. Therefore, these oral nanoparticles can be considered for delivery systems of agents that are sensitive to the gastrointestinal tract so that they can be transported across the epithelial cells to the bloodstream to deliver the loading cargo at an optimal concentration.

An induced corrosion inhibition of X80 steel by using marine bacterium Marinobacter salsuginis.

The corrosion behaviour of X80 pipeline steel was studied in a simulated marine environment inoculated with marine bacterium Marinobacter salsuginis. The electrochemical results showed that the increase in linear polarization resistance, charge transfer resistance, and the decrease in corrosion current density of the X80 pipeline steel immersed in the biotic medium indicated its high corrosion resistance compared to those in the abiotic medium. Surface morphological techniques including scanning electron microscopy, confocal laser scanning microscopy and live/dead cells staining were employed to observe the biofilm morphology and bacterial viability after different immersion times. X-ray photoelectron spectroscopy was used to analyse the oxides film formed on the steel surface. The obtained results indicated that the corrosion inhibition efficiency was obviously higher in the biotic medium compared to that in the abiotic medium. The high corrosion resistance of X80 steel in biotic medium was attributed to the formation of biofilm and the development of extracellular polymeric substances (EPS) layer on its surface.

Microfluidic preparation of polymer-lipid Janus microparticles with staged drug release property.

This work demonstrated a microfluidic preparation process for novel Janus microparticles with individual drug release properties in each compartment. A flow-focusing microfluidic chip was designed to produce oil-in-water droplets from a mixed solution of poly(lactic-co-glycolic acid) and a triglyceride type lipid. Based on solvent evaporation-induced phase separation, droplets evolved and were solidified into Janus particles, each of which had a polymer compartment and a lipid compartment. The ratio of the two compartments in a particle can be discretionarily regulated, and the particle structure can also be flexibly altered to Janus-patchy, triple, quadruple or core-shell type. Phase transition of the chosen lipid from solid to liquid would occur under physiological temperature, which was applied for rapid release of the loaded drug. The polymer compartment would undergo a slow degradation process in physiological environment, facilitating sustained drug release. Paclitaxel was loaded into Janus particles during preparation, and staged release was achieved, leading to a combination of rapid and sustained release, which is highly desired in target drug delivery. This study would start the application of hybrid Janus particles of polymer-lipid type with novel release kinetics in drug delivery systems.

Antibacterial durability and biocompatibility of antibacterial-passivated 316L stainless steel in simulated physiological environment.

Stainless steel (SS) has been widely applied as one of the most efficient implant metal materials, although corrosion and infection in body environment are still challenging. Herein, an antibacterial passivation method was employed to enhance the antibacterial performance and corrosion resistance of the medical 316L SS. The result proved that the antibacterial-passivated 316L SS exhibited stable antibacterial activity and effectively inhibited the formation of bacterial biofilm. Electrochemical measurements combined with X-ray photoelectron spectroscopy technique were used to study the corrosion resistance and semiconductor behavior of passivated 316L SS immersed in simulated physiological environment. The results indicated that the 316L SS after antibacterial passivation treatment for 1 h, soaking in the medium for 10 days, showed satisfactory corrosion resistance attributing to proper Cu deposition in the passive film. The anodic stripping voltammetry measurement further confirmed that the Cu-bearing passive film could continuously release Cu ions into medium. The zebrafish test demonstrated an excellent in vivo biocompatibility for the 316L SS with antibacterial passivation for 0.5 and 1 h, respectively. In addition, changes of surface roughness, contact angle and chemical composition after antibacterial passivation played an important role in explaining the antibacterial mechanism, which could be clearly divided into contact killing and ionic release killing. Hence, the antibacterial passivation treatment was preliminarily proved as a potential way for enhancing the persistent antibacterial activity and corrosion resistance of 316L SS.

Three-dimensional poly(lactic-co-glycolic acid)/silica colloidal crystal microparticles for sustained drug release and visualized monitoring.

In this paper, a three-dimensional (3D) poly(lactic-co-glycolic acid) (PLGA)/silica colloidal crystal drug delivery system with sustained drug release and visualized release monitoring was developed. This system had employed silica colloidal crystal microparticles as template skeleton, PLGA as drug carrier and dexamethasone (DEX) as therapeutic agent. The fabrication of the microparticle-based system included droplet formation based-on microfluidics, silica nanoparticle self-assembly and layer-by-layer deposition of PLGA containing DEX. In 370 µm droplets, the silica colloidal nanoparticles could self-assemble orderly into microparticles with a diameter of 187 µm, featuring red structure color. During the deposition of PLGA with the drug into the voids of the template microparticles, the reflection peak red-shifted and weakened until the voids were completely filled. Owing to the gradual degradation of PLGA, the release of DEX was triggered and sustained for 4 weeks with a cumulative release of 94.9%, while the structure color of the microparticles recovered during the release process. The color change could be recognized by the naked eyes, which would benefit the non-invasive monitoring of the drug release. The in vitro cytotoxicity and long-term inhibiting proliferation were investigated on retinal pigment epithelial cells. The inhibition effect of DEX released from the microparticles showed concentration-dependence from 40 to 200 µg mL-1 and time-dependence within 7 days. As a sustained drug delivery system with self-reporting drug release, the particles have potential applications in treatment of intraocular diseases.

Effect of copper addition on mechanical properties, corrosion resistance and antibacterial property of 316L stainless steel.

The effects of addition of different Cu content (0, 2.5 and 3.5wt%) on mechanical properties, corrosion resistance and antibacterial performance of 316L austenitic stainless steel (SS) after solution and aging treatment were investigated by mechanical test, transmission electron microscope (TEM), X-ray diffraction (XRD), electrochemical corrosion, X-ray photoelectron spectroscopy (XPS) and antibacterial test. The results showed that the Cu addition and heat treatment had no obvious influence on the microstructure with complete austenite features. The yield strength (YS) after solution treatment was almost similar, whereas the aging treatment obviously increased the YS due to formation of tiny Cu-rich precipitates. The pitting and protective potential of the solution treated Cu-bearing 316L SS in 0.9wt% NaCl solution increased with increasing Cu content, while gradually declined after aging, owing to the high density Cu-rich precipitation. The antibacterial test proved that higher Cu content and aging were two compulsory processes to exert good antibacterial performance. The XPS results further indicated that aging enhanced the Cu enrichment in passive film, which could effectively stimulate the Cu ions release from the surface of passive film.

Multitarget sensing of glucose and cholesterol based on Janus hydrogel microparticles.

A visualized sensing method for glucose and cholesterol was developed based on the hemispheres of the same Janus hydrogel microparticles. Single-phase and Janus hydrogel microparticles were both generated using a centrifugal microfluidic chip. For glucose sensing, concanavalin A and fluorescein labeled dextran used for competitive binding assay were encapsulated in alginate microparticles, and the fluorescence of the microparticles was positively correlated with glucose concentration. For cholesterol sensing, the microparticles embedded with γ-Fe2O3 nanoparticles were used as catalyst for the oxidation of 3,3',5,5'-Tetramethylbenzidine by H2O2, an enzymatic hydrolysis product of cholesterol. And the color transition was more sensitive in the microparticles than in solutions, indicating the microparticles are more applicable for visualized determination. Furthermore, Janus microparticles were employed for multitarget sensing in the two hemespheres, and glucose and cholesterol were detected within the same microparticles without obvious interference. Besides, the particles could be manipulated by an external magnetic field. The glucose and cholesterol levels were measured in human serum utilizing the microparticles, which confirmed the potential application of the microparticles in real sample detection.

Accelerated corrosion of 2205 duplex stainless steel caused by marine aerobic Pseudomonas aeruginosa biofilm.

Microbiologically influenced corrosion (MIC) of 2205 duplex stainless steel (DSS) in the presence of Pseudomonas aeruginosa was investigated through electrochemical and surface analyses. The electrochemical results showed that P. aeruginosa significantly reduced the corrosion resistance of 2205 DSS. Confocal laser scanning microscopy (CLSM) images showed that the depths of the largest pits on 2205 DSS with and without P. aeruginosa were 14.0 and 4.9µm, respectively, indicating that the pitting corrosion was accelerated by P. aeruginosa. X-ray photoelectron spectroscopy (XPS) results revealed that CrO3 and CrN formed on the 2205 DSS surface in the presence of P. aeruginosa.

A novel coping metal material CoCrCu alloy fabricated by selective laser melting with antimicrobial and antibiofilm properties.

OBJECTIVE: The aim of this study was to fabricate a novel coping metal CoCrCu alloy using a selective laser melting (SLM) technique with antimicrobial and antibiofilm activities and to investigate its microstructure, mechanical properties, corrosion resistance and biocompatibility. METHODS: Novel CoCrCu alloy was fabricated using SLM from a mixture of commercial CoCr based alloy and elemental Cu powders. SLM CoCr without Cu served as control. Antibacterial activity was analyzed using standard antimicrobial tests, and antibiofilm properties were investigated using confocal laser scanning microscope. Cu distribution and microstructure were determined using scanning electron microscope, optical microscopy and X-ray diffraction. Corrosion resistance was evaluated by potential dynamic polarization and biocompatibility measured using an MTT assay. RESULTS: SLM CoCrCu alloys were found to be bactericidal and able to inhibit biofilm formation. Other factors such as microstructure, mechanical properties, corrosion resistance and biocompatibility were similar to those of SLM CoCr alloys. SIGNIFICANCE: The addition of appropriate amounts of Cu not only maintains normal beneficial properties of CoCr based alloys, but also provides SLM CoCrCu alloys with excellent antibacterial and antibiofilm capabilities. This material has the potential to be used as a coping metal for dental applications.

Inhibition of Staphylococcus aureus biofilm by a copper-bearing 317L-Cu stainless steel and its corrosion resistance.

The present study investigated the antibacterial performance, corrosion resistance and surface properties of antibacterial austenitic 317L-Cu stainless steel (317L-Cu SS). After 4.5wt% copper was added to 317L stainless steel (317L SS), the new alloy underwent solid solution and aging heat treatment. Fluorescent staining using 4',6-diamidino-2-phenylindole (DAPI) revealed that the 317L-Cu SS showed strong antibacterial efficacy, achieving a 99% inhibition rate of sessile Staphylococcus aureus cells after 5days. The corrosion data obtained by potentiodynamic polarization curves indicated that in comparison with 317L SS, the pitting potential and corrosion current density of 317L-Cu slightly decreased due to the addition of Cu. The 317L-Cu SS exhibited no cytotoxicity against zebrafish (Danio rerio) embryos. The experimental results in this study demonstrated that the new alloy has potential applications in medical and daily uses.

An investigation of the antibacterial ability and cytotoxicity of a novel cu-bearing 317L stainless steel.

In order to solve the challenging problem of microbial infections caused by microorganisms on medical implants, it is imperative to develop novel antimicrobial biomaterials. This work demonstrated that 317L-Cu stainless steel (SS), created by adding copper through a solution and aging heat treatment process, exhibited good antibacterial properties against staphylococcus aureus, achieving 2 log reduction of planktonic cells after 5 days of incubation. In this study, the antibacterial test was performed using the plate count method, the fluorescence cell staining method and the quantitative polymerase chain reaction (qPCR) method. It is well known that a high concentration of copper ion can lead to cytotoxicity. This work explored the cytotoxicity of 317L-Cu SS through real-time cell analysis (RTCA). Experimental results demonstrated that the 317L-Cu SS possessed a satisfactory antibacterial ability against S. aureus, and the antibacterial rate based on the reduction of sessile cell count reached 98.3% after 24-hour treatment. The bacterial adhesion and the biofilm thickness were considerably reduced by the 317L-Cu SS. The results of RTCA suggested that 317L-Cu SS did not introduce cytotoxicity to mouse cells, indicating its suitability as a medical implant material.