Overexpression of a novel cytochrome P450 monooxygenase gene, CYP704B1, from Panax ginseng increase biomass of reproductive tissues in transgenic Arabidopsis.

Cytochrome P450 monooxygenase 704B (CYP704B), a member of the CYP86 clan, was found to be needed in Arabidopsis and rice to biosynthesize precursors of sporopollenin through oxidizing fatty acids. In the present study, we cloned and characterized a CYP704B gene in Panax ginseng, named PgCYP704B1. It shared high sequence identity (98-99%) with CYP704 of Arabidopsis, Theobroma cacao, and Morus notabilis. The phylogenetic comparison of ginseng and higher plants between the members of CYP86 clan revealed that ginseng CYP704 was categorized as a group of CYP704B with dicot plants. The expression of PgCYP704B1 is low in the stem, leaf, and fruit, and high in flower buds, particularly detected in the young gametic cell and tapetum layer of the developing anther. Arabidopsis plants overexpressing PgCYP704B1 improved plant biomass such as plant height, siliques and seed number and size. A cytological observation by transverse and longitudinal semi-thin sections of the siliques cuticles revealed that the cell length increased. Furthermore a chemical analysis showed that PgCYP704B1ox lines increased their cutin monomers contents in the siliques. Our results suggest that PgCYP704B1 has a conserved role during male reproduction for fatty acid biosynthesis and its overexpression increases cutin monomers in siliques that eventually could be used for seed production.

Cordyceps militaris Fungus Extracts-Mediated Nanoemulsion for Improvement Antioxidant, Antimicrobial, and Anti-Inflammatory Activities.

This study aimed to produce and optimize a Cordyceps militaris-based oil-in-water (O/W) nanoemulsion (NE) encapsulated in sea buckthorn oil (SBT) using an ultrasonication process. Herein, a nonionic surfactant (Tween 80) and chitosan cosurfactant were used as emulsifying agents. The Cordyceps nanoemulsion (COR-NE) was characterized using Fourier-transform infrared spectroscopy (FT-IR), dynamic light scattering (DLS), and field-emission transmission electron microscope (FE-TEM). The DLS analyses revealed that the NE droplets were 87.0 ± 2.1 nm in diameter, with a PDI value of 0.089 ± 0.023, and zeta potential of -26.20 ± 2. The small size, low PDI, and stable zeta potential highlighted the excellent stability of the NE. The NE was tested for stability under different temperature (4 °C, 25 °C, and 60 °C) and storage conditions for 3 months where 4 °C did not affect the stability. Finally, in vitro cytotoxicity and anti-inflammatory activity were assessed. The results suggested that the NE was not toxic to RAW 264.7 or HaCaT (human keratinocyte) cell lines at up to 100 µL/mL. Anti-inflammatory activity in liposaccharides (LPS)-induced RAW 264.7 cells was evident at 50 µg/mL and showed inhibition of NO production and downregulation of pro-inflammatory gene expression. Further, the NE exhibited good antioxidant (2.96 ± 0.10 mg/mL) activity and inhibited E. coli and S. aureus bacterial growth. Overall, the COR-NE had greater efficacy than the free extract and added significant value for future biomedical and cosmetics applications.

Preparation of Polyethylene Glycol-Ginsenoside Rh1 and Rh2 Conjugates and Their Efficacy against Lung Cancer and Inflammation.

Low solubility and tumor-targeted delivery of ginsenosides to avoid off-target cytotoxicity are challenges for clinical trials. In the present study, we report on a methodology for the synthesis of polyethylene glycol (PEG)-ginsenoside conjugates through a hydrolysable ester bond using the hydrophilic polymer polyethylene glycol with the hydrophobic ginsenosides Rh1 and Rh2 to enhance water solubility and passive targeted delivery. The resulting conjugates were characterized by 1H nuclear magnetic resonance (1H NMR) and Fourier-transform infrared spectroscopy (FT-IR). 1H NMR revealed that the C-6 and C-3 sugar hydroxyl groups of Rh1 and Rh2 were esterified. The conjugates showed spherical shapes that were monitored by field-emission transmission electron microscopy (FE-TEM), and the average sizes of the particles were 62 ± 5.72 nm and 134 ± 8.75 nm for PEG-Rh1and PEG-Rh2, respectively (measured using a particle size analyzer). Owing to the hydrophilic enhancing properties of PEG, PEG-Rh1 and PEG-Rh2 solubility was greatly enhanced compared to Rh1 and Rh2 alone. The release rates of Rh1 and Rh2 were increased in lower pH conditions (pH 5.0), that for pathophysiological sites as well as for intracellular endosomes and lysosomes, compared to normal-cell pH conditions (pH 7.4). In vitro cytotoxicity assays showed that the PEG-Rh1conjugates had greater anticancer activity in a human non-small cell lung cancer cell line (A549) compared to Rh1 alone, whereas PEG-Rh2 showed lower cytotoxicity in lung cancer cells. On the other hand, both PEG-Rh1 and PEG-Rh2 showed non-cytotoxicity in a nondiseased murine macrophage cell line (RAW 264.7) compared to free Rh1 and Rh2, but PEG-Rh2 exhibited increased efficacy against inflammation by greatly inhibiting nitric oxide production. Thus, the overall conclusion of our study is that PEG conjugation promotes the properties of Rh1 for anticancer and Rh2 for inflammation treatments. Depends on the disease models, they could be potential drug candidates for further studies.

Synthesis and pharmacokinetic characterization of a pH-sensitive polyethylene glycol ginsenoside CK (PEG-CK) conjugate.

The ginsenosides in Panax ginseng have vast structural and pharmacological efficacies. We covalently conjugated polyethylene glycol on the surface of CK (PEG-CK) through an acid-labile ester-linkage that showed increased solubility of CK. HPLC analysis showed that the release of CK was enhanced at acidic pH 5, whereas it was dramatically decreased at physiological pH 7.4. This might enhance the efficacy of CK.

Cellulose Nanocrystals-Incorporated Thermosensitive Hydrogel for Controlled Release, 3D Printing, and Breast Cancer Treatment Applications.

In situ-gel-forming thermoresponsive copolymers have been widely exploited in controlled delivery applications because their critical gel temperature is similar to human body temperature. However, there are limitations to controlling the delivery of biologics from a hydrogel network because of the poor networking and reinforcement between the copolymer networks. This study developed an in situ-forming robust injectable and 3D printable hydrogel network based on cellulose nanocrystals (CNCs) incorporated amphiphilic copolymers, poly(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide (PCLA). In addition, the physicochemical and mechanical properties of injectable hydrogels were controlled by physically incorporating CNCs with amphiphilic PCLA copolymers. CNCs played an unprecedented role in physically reinforcing the PCLA copolymers' micelle network via intermicellar bridges. Apart from that, the free-flowing closely packed rod-like CNCs incorporated PCLA micelle networks at low temperature transformed to a stable viscoelastic hydrogel network at physiological temperature. CNC incorporated PCLA copolymer sols effectively coordinated with hydrophobic doxorubicin and water-soluble lysozyme by a combination of hydrophobic and hydrogen bonding interaction and controlled the release of biologics. As shown by the 3D printing results, the biocompatible PCLA hydrogels continuously extruded during printing had good injectability and maintained high shape fidelity after printing without any secondary cross-linking steps. The interlayer bonding between the printed layers was high and formed stable 3D structures up to 10 layers. Subcutaneous injection of free-flowing CNC incorporated PCLA copolymer sols to BALB/c mice formed a hydrogel instantly and showed controlled biodegradation of the hydrogel depot without induction of toxicity at the implantation sites or surrounding tissues. At the same time, the in vivo antitumor effect on the MDA-MB-231 tumor xenograft model demonstrated that DOX-loaded hydrogel formulation significantly inhibited the tumor growth. In summary, the CNC incorporated biodegradable hydrogels developed in this study exhibit a prolonged release with special release kinetics for hydrophobic and hydrophilic biologics.

Development of molecular markers for the determination of the new cultivar 'Chunpoong' in Panax ginseng C. A. Meyer associated with a major latex-like protein gene.

Chunpoong is one of the most valuable cultivars of Panax ginseng C. A. MEYER, and is widely grown in Korea and China. Insertion/deletion (InDel) markers and single nucleotide polymorphism (SNP) markers are useful tools for marker-assisted selections. The SNP marker for determinate Chunpoong was previously developed from the nad7 gene of mtDNA by Wang et al. (2009) but was effective only on a limited range of cultivars. In this study, we studied the reasons for this limited application and developed new useful markers for application in Chunpoong-breeding programs. The new markers of InDel and SNP were designed in the major latex-like protein (MLP-like) gene which was highly expressed in 4-year-old Chunpoong expressed sequence tags (ESTs). To validate the marker in polymerase chain reaction (PCR), we used an InDel marker for identification of Chunpoong in the 70 Panax samples based on a double-blind test, and the success rate was 100%. For rapid and reliable assay of Chunpoong in numerous samples, we utilized an EvaGreen dye and melting curve method on real-time PCR. Furthermore, we designed an SNP marker that depended on the InDel region for more efficient detection of Chunpoong in real-time PCR. Compared with PCR-based assays, our Chunpoong SNP marker and real-time PCR assay offers a significant savings of time and labor in the analysis of large numbers of Chunpoong samples.

Protopanaxadiol aglycone ginsenoside-polyethylene glycol conjugates: synthesis, physicochemical characterizations, and in vitro studies.

Ginsenosides are triterpenoid saponins, which is an active compound responsible for most of the pharmacological effects of ginseng (Panax ginseng Meyer). It is known to have numerous structural and pharmacological properties. However, aqueous solubility and delivery of ginsenosides in targeted region by avoiding undesirable toxicity to normal cell is also of prime importance. The aim of this study was to obtain amphiphilic ginsenoside derivatives in which hydrophilic polymers were conjugated to ginsenosides to enhance the water solubility and targeted delivery. To this end, the hydrophobic protopanaxadiol ginsenoside aglycone (aPPD) was covalently conjugated to the backbone of hydrophilic polyethylene glycol (PEG) through a pH sensitive ester linkage, which was confirmed by 1H NMR and FTIR. The resultant PPD is covalently conjugated to hydrophilic PEG through esterification (PEG-PPD) forming self-assembled spherical nanoparticles, whose average particle diameter was 189 nm as observed by FE-TEM and particle size analyzer respectively. In vitro release experiments revealed that the release rate of PPD was rapidly increased from the self-assembled nanoparticles under acidic conditions (pH 5.0) than in a physiological buffer (pH 7.4) condition. Furthermore, in vitro cytotoxicity assays revealed that PEG-PPD conjugates exhibited lower cytotoxicity in HT-29 cancer cells compared with PPD alone. Since the slow release of PPD from conjugates is triggered only by acidic environmental conditions, such as those found in extracellular solid tumor tissues, intracellular endosomes, and intracellular lysosomes, the conjugation of PPD may aid its selective delivery to these targets. Overall, results suggest that pH-dependent release of PPD, which expected in reduced cytotoxicity to non-targeted regions, may enhance the overall efficacy of PPD.

Dyadobacter ginsengisoli sp. nov., isolated from soil of a ginseng field.

A Gram-negative, aerobic, non-motile, non-spore-forming and rod-shaped bacterium, strain Gsoil 043(T), was isolated from soil from a ginseng field in Pocheon province, South Korea. The novel isolate was characterized in order to determine its taxonomic position. On the basis of 16S rRNA gene sequence similarity, strain Gsoil 043(T) was shown to belong to the family 'Flexibacteraceae' and was related to Dyadobacter fermentans (96.7 %), Dyadobacter crusticola (96.3 %) and Dyadobacter hamtensis (95.8 %). The 16S rRNA gene sequence similarity of the novel strain to other recognized species within the family 'Flexibacteraceae' was less than 87.0 %. The G+C content of genomic DNA was 48 mol%. Phenotypic and chemotaxonomic data (major menaquinone, MK-7; major fatty acids, C(16 : 1)omega7c, iso-C(15 : 0) and C(16 : 0)) supported the affiliation of strain Gsoil 043(T) to the genus Dyadobacter. The results of physiological and biochemical tests enabled strain Gsoil 043(T) to be differentiated genotypically and phenotypically from the three Dyadobacter species with validly published names. The novel isolate therefore represents a novel species for which the name Dyadobacter ginsengisoli sp. nov. is proposed, with the type strain Gsoil 043(T) (=KCTC 12589(T)=LMG 23409(T)).