Associations between the keratinized mucosa width and the underlying alveolar bone dimensions at partial edentulous molar sites: a retrospective cross-sectional study.

BACKGROUND: The assessment of hard and soft tissue at edentulous sites is important for subsequent implant treatment design. The aim of the present study was to explore the associations between the keratinized mucosa width (KMW) and the underlying alveolar bone dimensions at partial edentulous molar sites. METHODS: In this retrospective study, a total of 110 patients with at least one missing molar were selected. The buccal KMW of the edentulous molar sites was evaluated. Cone-beam computed tomography scans were collected, and the height discrepancy between the alveolar crest and the buccal bone plate (HC-B) as well as the alveolar bone height (ABH) were measured. The KMW was compared among the HC-B and ABH groups at both maxillary and mandibular sites. Linear regression and generalized estimation equations (GEEs) were used to explore the associations between the KMW and alveolar bone dimensions at α = 0.05. RESULTS: Among the 110 patients, 158 edentulous molar sites were analyzed. The average HC-B and ABH were significantly lower at the maxillary sites (1.26 ± 1.62 mm, 11.62 ± 3.94 mm) than at the mandibular sites (3.67 ± 2.85 mm, 14.91 ± 3.01 mm, p < 0.001). The KMW was significantly lower at sites with HC-B > 2 mm than at sites with HC-B ≤ 2 mm both in the maxilla and mandible (p < 0.001). No significant differences were found between the KMW at sites with ABH < 10 mm and sites with ABH ≥ 10 mm (p > 0.05). Linear regression and GEEs analyses revealed that the HC-B was significantly associated with the KMW (B = -0.339, p < 0.001), while the association between the KMW and the ABH was not statistically significant (B = -0.046, p = 0.352). CONCLUSIONS: The buccal KMW at edentulous molar sites was significantly associated with the HC-B. Alveolar ridges presenting with a sloped configuration were more prone to possess a narrower band of keratinized mucosa. Both hard and soft tissue augmentation should be considered for implant treatment at these sites. The correlations of dynamic changes between the KMW and alveolar bone dimensions after tooth extraction should be further investigated.

Combined Periodontal-Orthodontic Treatment with Periodontal Corticotomy Regenerative Surgery in an Adult Patient Suffering from Periodontitis and Skeletal Class II Malocclusion: A Case Report with 5-Year Longitudinal Observation.

A thick periodontal phenotype with thick gingiva and alveolar bone volume is required for safe orthodontic tooth movement and long-term stability. A high incidence of dehiscence and fenestration in the labial aspect of mandibular anterior teeth may limit the correction of deformity and orthodontic treatment, especially when the lower anterior teeth are needed to have a large range of movement. This study reports a combination of periodontal therapy and orthodontic therapy with periodontal corticotomy regenerative surgery (PCRS) in a 25-year-old patient suffering from skeletal Class II malocclusion and periodontitis. The patient received periodontal therapy 5 years ago and commenced orthodontic treatment 4.5 years ago. During the 4 years of follow-up for PCRS, the clinical and radiographic evaluations revealed significant improvements in the periodontal phenotype of the mandibular anterior region. The periodontal phenotypes in the mandibular incisors region were all modified from thin to thick. Supplementing orthodontic treatment with labial PCRS could be a promising treatment strategy to maintain long-term periodontal health in adult patients with alveolar deficiency and thin gingiva tissue.

CCL2 is a key regulator and therapeutic target for periodontitis.

AIM: Our previous study revealed that the C-C motif chemokine receptor 2 (CCR2) is a promising target for periodontitis prevention and treatment. However, CCR2 is a receptor with multiple C-C motif chemokine ligands (CCLs), including CCL2, CCL7, CCL8, CCL13 and CCL16, and which of these ligands plays a key role in periodontitis remains unclear. The aim of the present study was to explore the key functional ligand of CCR2 in periodontitis and to evaluate the potential of the functional ligand as a therapeutic target for periodontitis. MATERIALS AND METHODS: The expression levels and clinical relevance of CCR2, CCL2, CCL7, CCL8, CCL13 and CCL16 were studied using human samples. The role of CCL2 in periodontitis was evaluated by using CCL2 knockout mice and overexpressing CCL2 in the periodontium. The effect of local administration of bindarit in periodontitis was evaluated by preventive and therapeutic medication in a mouse periodontitis model. Microcomputed tomography, haematoxylin and eosin staining, tartrate-resistant acid phosphatase staining, real-time quantitative polymerase chain reaction, enzyme-linked immunosorbent assay, bead-based immunoassays and flow cytometry were used for histomorphology, molecular biology and cytology analysis. RESULTS: Among different ligands of CCR2, only CCL2 was significantly up-regulated in periodontitis gingival tissues and was positively correlated with the severity of periodontitis. Mice lacking CCL2 showed milder inflammation and less bone resorption than wild-type mice, which was accompanied by a reduction in monocyte/macrophage recruitment. Adeno-associated virus-2 vectors overexpressing CCL2 in Ccl2-/- mice gingiva reversed the attenuation of periodontitis in a CCR2-dependent manner. In ligation-induced experimental periodontitis, preventive or therapeutic administration of bindarit, a CCL2 synthesis inhibitor, significantly inhibited the production of CCL2, decreased the osteoclast number and bone loss and reduced the expression levels of proinflammatory cytokines TNF-α, IL-6 and IL-1ß. CONCLUSIONS: CCL2 is a pivotal chemokine that binds to CCR2 during the progression of periodontitis, and targeting CCL2 may be a feasible option for controlling periodontitis.

Pediatric sleep-disordered breathing in Shanghai: characteristics, independent risk factors and its association with malocclusion.

OBJECTIVES: This study aimed to determine the prevalence and independent risk factors of SDB, and explore its association with malocclusion among 6-11-year-old children in Shanghai, China. METHODS: A cluster sampling procedure was adopted in this cross-sectional study. Pediatric Sleep Questionnaire (PSQ) was applied to evaluate the presence of SDB. Questionnaires including PSQ, medical history, family history, and daily habits/environment were completed by parents under instruction, and oral examinations were implemented by well-trained orthodontists. Multivariable logistic regression was applied to identify independent risk factors for SDB. Chi-square tests and Spearman's Rank Correlation were used to estimate the relationship between SDB and malocclusion. RESULTS: A total of 3433 subjects (1788 males and 1645 females) were included in the study. The SDB prevalence was about 17.7%. Allergic rhinitis (OR 1.39, 95% CI 1.09-1.79), adenotonsillar hypertrophy (OR 2.39, 95% CI 1.82-3.19), paternal snoring (OR 1.97, 95% CI 1.53-2.53), and maternal snoring (OR 1.35, 95% CI 1.05-1.73) were independent risk factors for SDB. The SDB prevalence was higher in children with retrusive mandibles than in proper or excessive ones. No significant difference was observed in the correlation between SDB and lateral facial profile, mandible plane angle, constricted dental arch form, the severity of anterior overjet and overbite, degree of crowding and spacing, and the presence of crossbite and open bite. CONCLUSIONS: The prevalence of SDB in primary students in the Chinese urban population was high and highly associated with mandible retrusion. The independent risk factors included Allergic rhinitis, adenotonsillar hypertrophy, paternal snoring, and maternal snoring. More efforts should be made to enhance public education about SDB and related dental-maxillofacial abnormalities.

Critical roles for CCR2 and the therapeutic potential of cenicriviroc in periodontitis: A pre-clinical study.

AIM: CCR2 plays important roles in many inflammatory and bone metabolic diseases, but its specific role in periodontitis is unknown. In the present study, we aimed to explore the role of CCR2 in the progression of periodontitis and evaluate the effect of cenicriviroc (CVC) on periodontitis. MATERIALS AND METHODS: The expression of CCR2 was studied in patients with periodontitis and in ligation-induced murine model of periodontitis. The role of CCR2 in promoting inflammation and bone resorption in periodontitis was evaluated in Ccr2-/- mice and wild-type mice. The effect of CVC in the prevention and treatment of periodontitis was evaluated by systemic and local medication. Microcomputed tomography, haematoxylin and eosin staining, tartrate-resistant acid phosphatase staining, quantitative real-time polymerase chain reaction, enzyme-linked immunosorbent assay, and flow cytometry were used for histomorphology, molecular biology, and cytology analysis, respectively. RESULTS: In this study, we demonstrated that CCR2 was highly expressed in human and murine periodontitis and that CCR2 deficiency was associated with decreased inflammatory monocyte and macrophage infiltration and inflammatory mediators, osteoclast number and alveolar bone resorption. Prevention and treatment with CVC significantly reduced the severity of periodontitis, regardless of whether it was administered systemically or locally. CONCLUSIONS: CCR2 plays an important role in the development and progression of periodontitis, and CVC is a potential drug for the prevention and treatment of periodontitis.

A critical review on microbial degradation of petroleum-based plastics: quantitatively effects of chemical addition in cultivation media on biodegradation efficiency.

Petroleum-based plastics (PBP) with different properties have been developed to suit various needs of modern lives. Nevertheless, these well-developed properties also present the double-edged sword effect that significantly threatens the sustainability of the environment. This work focuses on the impact of microbial cultivating conditions (the elementary compositions and temperature) to provide insightful information for the process optimization of microbial degradation. The major elementary compositions in cultivation media and temperature from the literature were radically reviewed and assessed using the constructed supervised machine learning algorithm. Fifty-two literatures were collected as a training dataset to investigate the impact of major chemical elements and cultivation temperature upon PBP biodegradation. Among six singular parameters (NH4+, K+, PO43-, Mg2+, Ca2+, and temperature) and thirty corresponding binary parameters, four singular (NH4+, K+, PO43-, and Mg2+) and six binary parameters (NH4+/K+, NH4+/PO43-, NH4+/Ca2+, K+/PO43-, PO43-/Mg2+, Mg2+/Temp) were identified as statistically significant towards microbial degradation through analysis of variance (ANOVA). The binary effect (PO43-/Mg2+) is found to be the most statistically significant towards the microbial degradation of PBP. The concentration range, which locates at 0.1-0.6 g/L for Mg2+ and 0-2.8 g/L for PO43-, was identified to contribute to the maximum PBP biodegradation. Among all the investigated elements, Mg2+ is the only element that is statistically and significantly associated with the variations of cultivation temperature. The optimal preparation conditions within ± 20% uncertainties based upon the range of collected literature reports are recommended. Five representative cultivation elementary compositions (NH4+, K+, PO43-, Mg2+, and Ca2+) and temperature were reviewed from fifty two different literature reports to investigate their impacts on the microbial degradation of PBP using supervised machine learning algorithm. The optimal cultivation conditions based upon collected literature reports to achieve biodegradation over 80% were identified.

Adsorption of Cu2+ by UV aged polystyrene in aqueous solution.

Microplastics are the critical carriers of heavy metals in the environment. Thus, investigating the adsorption mechanisms between the microplastics and heavy metals is helpful to understand the migration and transformation pattern of the heavy metals in the environment. The adsorption of microplastics towards heavy metals can be largely affected by natural aging (e.g., UV-aging), environmental pH, and salinity. In this study, the adsorption of polystyrene (PS) towards Cu2+ and the effects of UV-aging, environment pH, and salinity on the adsorption were systematically investigated. The results show that the adsorption capacity of PS towards Cu2+ increased with the UV-aging time, as UV-aging increased the microcracks and oxygen-containing functional groups on the surface of the PS. Adsorption kinetics data followed the pseudo-second-order model, indicating that the interaction between PS and Cu2+ is chemical adsorption. Adsorption isotherms data could be well-described by both the Langmuir and Freundlich models, indicating that the adsorption was multilayer adsorption. As the solution pH and salinity can influence the surface charge of the PS, they could also affect the performance of the PS on Cu2+ adsorption. High pH facilitated the adsorption of PS towards Cu2+, while high salinity (above 1‰) inhibited the adsorption.

The keratinized mucosa width at partially edentulous molar sites and its associated factors: a pilot study.

BACKGROUND: Assessment of the keratinized mucosa width (KMW) at edentulous sites is important for the subsequent implant treatment design. This pilot study aimed to evaluate the characteristics of the KMW at edentulous molar sites and explore the associated factors. METHODS: A total of 150 patients with 222 edentulous molar sites were included. The buccal KMW of the edentulous molar sites was measured during implant treatment planning. Potentially associated factors, including age, sex, smoking status, location, reasons for tooth loss/extraction, gingival phenotype (GP) and keratinized gingival width (KGW) of the adjacent teeth, were collected and analyzed. The Shapiro‒Wilk test, Student's t test, one-way ANOVA, generalized estimation equations (GEEs) and linear regression analysis were used for data analysis at α = 0.05. RESULTS: The buccal KMW at edentulous molar sites was 3.97 ± 2.06 mm, and 41.9% of sites presented with KMW < 4 mm. The mean KMWs of the maxillary sites were significantly higher than that those of the mandibular sites (4.96 ± 2.05 mm vs. 3.41 ± 1.85 mm, respectively). In total, 54.7%, 46.5%, 29.8%, and 0.0% of mandibular first and second molar sites and maxillary first and second molar sites, respectively, displayed a KMW of < 4 mm. Statistically significant linear correlations were found between KMW and GP (r = 0.161, p = 0.025) and between KMW and KGW of the adjacent teeth (r = 0.161, p = 0.023), while other factors were found to have no significant association. CONCLUSION: Within the limitations of the present study, the KMW at edentulous molar site was related to the location of molar tooth loss/extraction. The GP and KGW of the adjacent teeth of edentulous molar sites were also associated with their KMW, which was probably attributed to the continuity of the adjacent soft tissue.

Three-dimensional position changes of unopposed molars before implant rehabilitation: a short-term retrospective cohort analysis.

OBJECTIVE: To investigate the spatial changes of unopposed molars within the period between the antagonist extraction and the final implant restoration using data from cone beam computed tomography. METHODS: A total of 59 patients with 68 unopposed molars were included in this study. Three-dimensional models reconstructed from cone beam computed tomography data before and after loss of the antagonist were superimposed to measure the spatial changes. The overeruption and tipping of target teeth were calculated by coordinate values. RESULTS: The result of overeruption over the study period (9.2 ± 4.3 months) was expressed by two values: the mean overeruption of molar cups (0.432 mm) and the maximum overeruption of cusps (0.753 mm), which were statistically significant compared to the baseline level (p < 0.001). The average tipping was 1.717 degrees in the buccal direction. CONCLUSIONS: Unopposed molars displayed overeruption throughout the study period (9.2 ± 4.3 months), which indicates that the clinicians should pay attention to the possibilities of overeruption and make appropriate interventions in their clinical practice. The establishment of three-dimensional measuring methods using cone beam computed tomography data helps analyze spatial changes.

Regulating Tumor N6 -Methyladenosine Methylation Landscape using Hypoxia-Modulating OsSx Nanoparticles.

The epigenetic dysregulation and hypoxia are two important factors that drive tumor malignancy, and N6 -methyladenosine (m6 A) in mRNA is involved in the regulation of gene expression. Herein, a nanocatalyst OsSx -PEG (PEG = poly(ethylene glycol)) nanoparticles (NPs) as O2 modulator is developed to improve tumor hypoxia. OsSx -PEG NPs can significantly downregulate genes involved in hypoxia pathway. Interestingly, OsSx -PEG NPs elevate RNA m6 A methylation levels to cause the m6 A-dependent mRNA degradation of the hypoxia-related genes. Moreover, OsSx -PEG NPs can regulate the expression of RNA m6 A methyltransferases and demethylases. Finally, DOX@OsSx -PEG (DOX = doxorubicin; utilized as a model drug) NPs modulate tumor hypoxia and regulate mRNA m6 A methylation of hypoxia-related genes in vivo. As the first report about relationship between catalytic nanomaterials and RNA modifications, the research opens a new avenue for unveiling the underlying action mechanisms of hypoxia-modulating nanomaterials and shows potential of regulating RNA modification to overcome chemoresistance.

Sorafenib and triptolide loaded cancer cell-platelet hybrid membrane-camouflaged liquid crystalline lipid nanoparticles for the treatment of hepatocellular carcinoma.

In addition to early detection, early diagnosis, and early surgery, it is of great significance to use new strategies for the treatment of hepatocellular carcinoma (HCC). Studies showed that the combination of sorafenib (SFN) and triptolide (TPL) could reduce the clinical dose of SFN and maintain good anti-HCC effect. But the solubility of SFN and TPL in water is low and both drugs have certain toxicity. Therefore, we constructed a biomimetic nanosystem based on cancer cell-platelet (PLT) hybrid membrane camouflage to co-deliver SFN and TPL taking advantage of PLT membrane with long circulation functions and tumor cell membrane with homologous targeting. The biomimetic nanosystem, SFN and TPL loaded cancer cell-PLT hybrid membrane-camouflaged liquid crystalline lipid nanoparticles ((SFN + TPL)@CPLCNPs), could simultaneously load SFN and TPL at the molar ratio of SFN to TPL close to 10:1. (SFN + TPL)@CPLCNPs achieved long circulation function and tumor targeting at the same time, promoting tumor cell apoptosis, inhibiting tumor growth, and achieving a better "synergy and attenuation effect", which provided new ideas for the treatment of HCC.

Clinical evaluations of free gingival grafting before implant placement to increase keratinized tissue width in molar regions: A retrospective case series.

OBJECTIVES: To evaluate the dimensional changes of the keratinized tissue width (KTW) in molar regions after augmentation by free gingival grafts (FGG) before implant placement. MATERIAL AND METHODS: In seventeen patients, twenty implant sites in molar regions with KTW ≤3 mm at the buccal aspect received FGG 2 months before implant placement. KTW at the buccal aspect was measured before FGG (T0), immediately before implant placement (T1), at the time of impression taking for final prosthesis fabrication (T2), and at the end of the follow-up period after loading (T3, 12-48 months). Changes in KTW before and after FGG, as well as the alterations during the follow-up period after loading, were analyzed. Shapiro-Wilk test, paired Student's t test, and Wilcoxon signed-rank test were used for the data analysis at α = 0.05. RESULTS: KTW at the buccal aspect of the alveolar ridge was observed with a significant gain of 5.9 ± 1.3 mm at T1 (p < .001). The shrinkage of KTW from T2 to T3 was 8.5%, which was limited but statistically significant (p = .008). KTW at the buccal aspect of implant restorations was 5.0 ± 1.5 mm at T3. CONCLUSIONS: Within the limitations of the present study, our data suggest that using FGG to increase KTW in molar regions before implant placement had a predictable result. The buccal KTW had a limited reduction and was ≥3 mm with more than 12 months of follow-up after loading.

Effect of ridge preservation at molar extraction sites with severe periodontitis on the Schneiderian membrane thickness changes: a pilot study.

BACKGROUND: Information regarding the reaction of bone augmentation in terms to sinus mucosa thickness of periodontally compromised molar extraction sites is limited. This retrospective study aimed to analyze the effect of ridge preservation procedures following the extraction of molars with severe periodontitis on the healing pattern of adjacent maxillary sinus mucosal membranes. METHODS: Thirty-one periodontally compromised maxillary molar teeth either receiving ridge preservation (test group, n = 20) or undergoing spontaneous healing (control group, n = 11) were investigated. Cone-beam computed tomography (CBCT) scanning was performed before the extraction procedure and repeated 6 months later. The mucosa thickness (MT) of the adjacent periodontally compromised molar tooth was measured from CBCT images before tooth extraction and after 6 months of healing at nine assigned measurement points. The data were analyzed at α = 0.05. RESULTS: The prevalence of pre-extraction maxillary sinus mucosal thickening was 60.0% and 63.6% in the test and control groups, respectively. The average MT of the thickened sinus mucosa before tooth extraction was 3.78 ± 2.36 mm in the test group and 4.63 ± 3.20 mm in the control group (P = 0.063). The mean mucosal thickening reductions in the thickened MT subjects after 6 months of healing were 2.20 ± 2.05 mm (test group) and 2.64 ± 2.70 mm (control group), P = 0.289. The differences of MT between the time prior to extraction and after 6 months of healing were statistically significant within both groups (P < 0.05). CONCLUSIONS: Following extraction of molars with severe periodontitis, a reduction in swelling of the Schneiderian membrane has been observed regardless of the addition of a DBBM socket graft. However, a mucosal thickness > 2 mm was still frequently observed.

An aptasensor strip-based colorimetric determination method for kanamycin using cellulose acetate nanofibers decorated DNA-gold nanoparticle bioconjugates.

The preparation of portable colorimetric biosensor strips is described by combining aptamer-immobilized electrospun nanofiber membranes (A-NFMs) with signal probes (DNA-conjugated gold nanoparticles (AuNPs)) for determination of kanamycin (KMC) as a model analyte. The A-NFMs were decorated with complementary single-stranded DNA (cDNA) of KMC aptamer-conjugated AuNPs (cDNA@Au) to get the colorimetric biosensor strips. The constructed biosensor strips showed a significant absorbance decreasing band at 510 nm which induce a visual color change from pink to white when exposed to KMC, with a low detection limit of 2.5 nM (at S/N = 3). The effect is due to disassembling of cDNA@Au from NFMs in the presence of KMC because the aptamer has a higher affinity to KMC than its complementary DNA, which resulted in replacing cDNA@Au with KMC. Satisfactory performance was observed in real sample (drinking water and milk) analysis with a recovery of 98.9-102.2%. The constructed colorimetric biosensor test strips hold great application promise for food safety control. Graphical abstract Schematic representation of biosensor strips for kanamycin detection prepared with the cDNA@Au immobilized aptamer-based cellulose acetate nanofibers.

Regulation of adipose-tissue-derived stromal cell orientation and motility in 2D- and 3D-cultures by direct-current electrical field.

Cell alignment and motility play a critical role in a variety of cell behaviors, including cytoskeleton reorganization, membrane-protein relocation, nuclear gene expression, and extracellular matrix remodeling. Direct current electric field (EF) in vitro can direct many types of cells to align vertically to EF vector. In this work, we investigated the effects of EF stimulation on rat adipose-tissue-derived stromal cells (ADSCs) in 2D-culture on plastic culture dishes and in 3D-culture on various scaffold materials, including collagen hydrogels, chitosan hydrogels and poly(L-lactic acid)/gelatin electrospinning fibers. Rat ADSCs were exposed to various physiological-strength EFs in a homemade EF-bioreactor. Changes of morphology and movements of cells affected by applied EFs were evaluated by time-lapse microphotography, and cell survival rates and intracellular calcium oscillations were also detected. Results showed that EF facilitated ADSC morphological changes, under 6 V/cm EF strength, and that ADSCs in 2D-culture aligned vertically to EF vector and kept a good cell survival rate. In 3D-culture, cell galvanotaxis responses were subject to the synergistic effect of applied EF and scaffold materials. Fast cell movement and intracellular calcium activities were observed in the cells of 3D-culture. We believe our research will provide some experimental references for the future study in cell galvanotaxis behaviors.

Effect Soft Measurement Model of Steel Slag Powder Repair Heavy Metal Contaminated Soil with Fourier Transform Infrared Spectrum.

Using converter slag as curing stabilizing agents, applying Toxicity Characteristic Leaching Procedure (TCLP) and Fourier transform infrared spectroscopy method of tracking and detection of heavy metals in soil remediation effect of slag powder, and the micro-structure of mixtures (slag powder and heavy metal contaminated soils). It can establish soft sensor mode which is based on Gaussian process regression slag powder on heavy metal contaminated soil remediation effect. by using Gaussian process regression. The results show that the steel slag powder on heavy metals contaminated soil has good repairing effect, 180 d within its restorative effects are maintained over 90%; the repair process is divided into early, middle and late stages, in which the early (1~3 d) repair mode is given priority to with ion exchange high alkaline environment, medium-term (7~42 d) ion exchange and gel setting weaken the enhanced role of the late (56~180 d) form a large number CSH gel, the gel solidification further strengthened; based on Gaussian process regression Steel slag powder on heavy metal contaminated soil remediation effect soft measurement model of the real and predicted values agree well with the data, the absolute error is -1.35 ~-0.48, relative error of -1.448%～-0.497%.

LC-UV Determination of Baicalin in Rabbit Plasma and Tissues for Application in Pharmacokinetics and Tissue Distribution Studies of Baicalin after Intravenous Administration of Liposomal and Injectable Formulations.

A simple and sensitive LC-UV method to investigate the pharmacokinetics and biodistribution pattern of baicalin in rabbits was established and validated. Baicalin and the internal standard, rutin, were extracted from biosamples using acetonitrile as protein precipitation after pretreated with ammonium acetate buffer (pH 3.5; 1 M) to obtain a pure chromatographic peak and high extraction recovery. Chromatographic separation was achieved on a reverse-phase C18 column with a gradient elution at flow rate of 1.0 mL/min. UV absorption was set at 278 nm. Chromatographic response was linear over the ranges of 0.05-10.00 µg/mL in plasma and 0.05-300.00 µg/g in tissues with the limits of quantification of 50.0 ng/mL in plasma and tissues, and the limit of detection of baicalin in bio-samples of 15 ng/mL. The RSD of intra-and inter-day for the biosamples were from 4.19% to 10.84% and from 4.37% to 10.93%, respectively. The accuracy of plasma and tissue samples ranged from 81.6% to 95.2% and 80.8% to 98.4%, respectively. The extraction recoveries ranged from 81.5% to 88.3% for plasma, from 73.1% to 93.2% for tissues, respectively. Baicalin was stable in rabbit biosamples. The validated method was successfully applied to the study of the pharmacokinetics and tissue distribution of baicalin after intravenous administration of liposomal and injectable formulations to rabbits. Compared to baicalin injection, the pharmacokinetics and biodistribution behavior of baicalin was altered significantly in rabbits treated with its liposomes and drug concentration in the lungs was greatly increased.

Evaluation of different screening methods to understand the dissolution behaviors of amorphous solid dispersions.

OBJECTIVE: The objectives of the current study were to understand the dissolution behaviors of amorphous solid dispersions (ASD) using different screening methods and their correlation to the dissolution of formulated products. MATERIALS AND METHODS: A poorly soluble compound, compound E, was used as a model compound. ASDs were prepared with HPMC, Kollidon VA64 and Eudragit EPO using hot-melt extrusion. Different techniques including precipitation, powder, capsule and compact dissolution and the dissolution of formulated products were conducted in USP simulated gastric fluid using a USP II dissolution apparatus. RESULTS AND DISCUSSIONS: It was found that a precipitation study could generally predict powder, capsule and compact dissolution. Yet, it was recommended to run the dissolution at a higher paddle speed or for a longer duration to improve the predictability. It was also recommended to run powder, capsule and compact dissolution at both slow and high speeds to gain insights into wetting, dispersion and the dissolution of a system. Sometimes, capsule or compact dissolution could not be predicted by precipitation or powder dissolution due to plug formation. In this case, properly designed dosage forms were needed to break up this plug to optimize the dissolution profiles. On the contrary, formulations and dissolution conditions would have minimal effects on the dissolution profiles of a fast-dissolving solid dispersion. CONCLUSIONS: Different techniques are available to select the right polymers to optimize dissolution behaviors. However, it is important to understand the merits and limitations of each technique in order to optimize the formulations for amorphous solid dispersions.

[Effect of stability and dissolution of realgar nano-particles using solid dispersion technology].

OBJECTIVE: To improve the stability and dissolution of realgar nano-particles by solid dispersion. METHOD: Using polyethylene glycol 6000 and poloxamer-188 as carriers, the solid dispersions were prepare by melting method. XRD, microscopic inspection were used to determine the status of realgar nano-particles in solid dispersions. The content and stability test of As(2)0(3) were determined by DDC-Ag method. Hydride generation atomic absorption spectrometry was used to determine the content of Arsenic and investigated the in vitro dissolution behavior of solid dispersions. RESULT: The results of XRD and microscopic inspection showed that realgar nano-particles in solid dispersions were amorphous. The dissolution amount and rate of Arsenic from realgar nano-particles of all solid dispersions were increased significantly, the reunion of realgar nano-particles and content of As(2)0(3) were reduced for the formation of solid dispersions. CONCLUSION: The solid dispersion of realgar nano-particles with poloxamer-188 as carriers could obviously improve stability, dissolution and solubility.

Combined Application of Dentin Noncollagenous Proteins and Odontogenic Biphasic Calcium Phosphate in Rabbit Maxillary Sinus Lifting.

BACKGROUND: Teeth can be used as a raw material for preparing bone substitutes due to their similar chemical composition to bone. The objective of our study was to evaluate the effect of odontogenic biphasic calcium phosphate (BCP) incorporating dentin noncollagenous proteins (DNCPs) on osteogenesis and stability in maxillary sinus augmentation. METHODS: The composition, structure and morphology of the odontogenic BCP were tested by X-ray powder diffraction (XRD), Brunauer-Emmett-Teller, and scanning electron microscopy methods. The biocompatibility and osteoinduction of DNCPs and materials were examined in vitro and their bone regeneration capacity was verified in vivo. RESULTS: The results showed that the cells adhered and proliferated well on the DNCP-loaded BCP scaffold. The odontogenic BCP and DNCPs promoted osteogenic differentiation of cells, The new bone formation in the BCP groups and DNCP subgroups was significantly higher than the new bone formation in the control, and the new bone quality was better. The bone regeneration effect of odontogenic BCP was similar to the effect of deproteinized bovine bone mineral, but ß-TCP did not maintain the height and volume of bone reconstruction. CONCLUSION: In conclusion, the combined application of DNCPs and odontogenic BCP is an effective strategy for tissue engineering osteogenesis in the maxillary sinus region. The biomimetic strategy could provide a new approach for patients requiring maxillary sinus lifting.