Adaptation mechanism of three Impatiens species to different habitats based on stem morphology, lignin and MYB4 gene.

BACKGROUND: Impatiens is an important genus with rich species of garden plants, and its distribution is extremely extensive, which is reflected in its diverse ecological environment. However, the specific mechanisms of Impatiens' adaptation to various environments and the mechanism related to lignin remain unclear. RESULTS: Three representative Impatiens species,Impatiens chlorosepala (wet, low degree of lignification), Impatiens uliginosa (aquatic, moderate degree of lignification) and Impatiens rubrostriata (terrestrial, high degree of lignification), were selected and analyzed for their anatomical structures, lignin content and composition, and lignin-related gene expression. There are significant differences in anatomical parameters among the stems of three Impatiens species, and the anatomical structure is consistent with the determination results of lignin content. Furthermore, the thickness of the xylem and cell walls, as well as the ratio of cell wall thickness to stem diameter have a strong correlation with lignin content. The anatomical structure and degree of lignification in Impatiens can be attributed to the plant's growth environment, morphology, and growth rate. Our analysis of lignin-related genes revealed a negative correlation between the MYB4 gene and lignin content. The MYB4 gene may control the lignin synthesis in Impatiens by controlling the structural genes involved in the lignin synthesis pathway, such as HCT, C3H, and COMT. Nonetheless, the regulation pathway differs between species of Impatiens. CONCLUSIONS: This study demonstrated consistency between the stem anatomy of Impatiens and the results obtained from lignin content and composition analyses. It is speculated that MYB4 negatively regulates the lignin synthesis in the stems of three Impatiens species by regulating the expression of structural genes, and its regulation mechanism appears to vary across different Impatiens species. This study analyses the variations among different Impatiens plants in diverse habitats, and can guide further molecular investigations of lignin biosynthesis in Impatiens.

Hydrogel-mesh composite for wound closure.

During operations, surgical mesh is commonly fixed on tissues through fasteners such as sutures and staples. Attributes of surgical mesh include biocompatibility, flexibility, strength, and permeability, but sutures and staples may cause stress concentration and tissue damage. Here, we show that the functions of surgical mesh can be significantly broadened by developing a family of materials called hydrogel-mesh composites (HMCs). The HMCs retain all the attributes of surgical mesh and add one more: adhesion to tissues. We fabricate an HMC by soaking a surgical mesh with a precursor, and upon cure, the precursor forms a polymer network of a hydrogel, in macrotopological entanglement with the fibers of the surgical mesh. In a surgery, the HMC is pressed onto a tissue, and the polymers in the hydrogel form covalent bonds with the tissue. To demonstrate the concept, we use a poly(N-isopropylacrylamide) (PNIPAAm)/chitosan hydrogel and a polyethylene terephthalate (PET) surgical mesh. In the presence a bioconjugation agent, the chitosan and the tissue form covalent bonds, and the adhesion energy reaches above 100 J⋅m-2 At body temperature, PNIPAAm becomes hydrophobic, so that the hydrogel does not swell and the adhesion is stable. Compared with sutured surgical mesh, the HMC distributes force over a large area. In vitro experiments are conducted to study the application of HMCs to wound closure, especially on tissues under high mechanical stress. The performance of HMCs on dynamic living tissues is further investigated in the surgery of a sheep.

Preliminary identification of soil fungi for the degradation of polyurethane film.

Polyurethane (PU) is a versatile plastic that boasts high environmental resistance. The biodegradation of PU has become a hot topic of research aimed at finding ways to potentially solve PU pollutants. Identifying microorganisms capable of efficiently degrading PU plastics is pivotal for the development of a green recycling process for PU. This study aimed to isolate and characterize PU-degrading fungi from the soil of a waste transfer station in Luoyang, China. We isolated four different fungal strains from the soil. Among the isolates, the P2072 and P2073 strains were identified as Rhizopus oryzae (internal transcribed spacer identity, 99.66%) and Alternaria alternata (internal transcribed spacer identity, 99.81%), respectively, through microscopic, morphologic, as well as 18S rRNA sequencing. The degradation ability of strains P2072 and P2073 was analyzed through measurement of weight loss, and they exhibited a degradation rate of 2.7% and 3.3%, respectively, for the PU films after 2 months' growth in mineral salt medium (MSM) with PU films as the sole carbon source. In addition, the P2073 strain exhibited protease activity in the presence of PU. To our knowledge, R. oryzae has never been reported as a PU-degrading fungus. This study provides a new perspective on the biodegradation of PU.

Biomimetic Robust All-Polymer Porous Coatings for Passive Daytime Radiative Cooling.

Passive daytime radiation cooling (PDRC) has gained considerable attention as an emerging and promising cooling technology. Polymer-based porous materials are one of the important candidates for PDRC application due to their easy processing, free of inorganic particle doping, and multifunctionality. However, the mechanical properties of these porous materials, which are critical in outdoor services, have been overlooked in previous studies. Herein, a nonsolvent-induced phase separation (NIPS) method combined with ambient pressure drying to prepare polyethylene-polysilicate all-polymer porous coatings is developed. The coatings possess a Cyphochilus beetle-like skeleton structure with optimal skeleton size, laminated anisotropy, and high volume fraction (64 ± 1%). These structure features ensure a maximum skeleton density without optical crowding, thus enhancing light scattering and stress dispersion, and balancing optical and mechanical properties. The coatings exhibit significant mechanical robustness (only ≈70 µm thickness reduction after 1000 Taber abrasion cycles at a 750 g load without influencing optical performance), durability, optical properties (a solar reflectance of ≈95% and an average near-normal thermal emittance of ≈96%), and PDRC performance (realizing sub-ambient cooling of ≈3-6 °C at midday with different weather conditions). The work provides a new solution to improve the practicability of polymer-based porous coatings in PDRC outdoor services and other fields.

Sensing Material-Dependent Interference of Multiple Heavy Metal Ions: Experimental and Simulated Thermodynamics Study on Cu(II), Cd(II), and As(III) Electroanalysis.

Interference among multiple heavy metal ions (HMIs) is a significant problem that must be solved in electroanalysis, which extremely restricts the practical popularization of electrochemical sensors. However, due to the limited exploration of the intrinsic mechanism, it is still difficult to confirm the influencing factors. In this work, a series of experimental and theoretical electroanalysis models have been established to investigate the electroanalysis results of Cu(II), Cd(II), As(III), and their mixtures, which were based on the simple structure and stable coordination of nickel single-atom catalysts. X-ray absorption spectroscopy and density functional theory calculations were used to reveal the underlying detection mechanism of the 50-fold boosting effect of Cu(II) on As(III) while Cd(II) inhibits As(III). Combining the application of the thermodynamic model and Fourier transform infrared reflection, the specific interaction of the nanomaterials and HMIs on the interface is considered to be the fundamental source of the interference. This work opens up a new way of thinking about utilizing the unique modes of interplay between nanomaterials and HMIs to achieve anti-interference intelligent electrodes in stripping analysis.

Application of logistic differential equation models for early warning of infectious diseases in Jilin Province.

BACKGROUND: There is still a relatively serious disease burden of infectious diseases and the warning time for different infectious diseases before implementation of interventions is important. The logistic differential equation models can be used for predicting early warning of infectious diseases. The aim of this study is to compare the disease fitting effects of the logistic differential equation (LDE) model and the generalized logistic differential equation (GLDE) model for the first time using data on multiple infectious diseases in Jilin Province and to calculate the early warning signals for different types of infectious diseases using these two models in Jilin Province to solve the disease early warning schedule for Jilin Province throughout the year. METHODS: Collecting the incidence of 22 infectious diseases in Jilin Province, China. The LDE and GLDE models were used to calculate the recommended warning week (RWW), the epidemic acceleration week (EAW) and warning removed week (WRW) for acute infectious diseases with seasonality, respectively. RESULTS: Five diseases were selected for analysis based on screening principles: hemorrhagic fever with renal syndrome (HFRS), shigellosis, mumps, Hand, foot and mouth disease (HFMD), and scarlet fever. The GLDE model fitted the above diseases better (0.80 ≤ R2 ≤ 0.94, P <  0. 005) than the LDE model. The estimated warning durations (per year) of the LDE model for the above diseases were: weeks 12-23 and 40-50; weeks 20-36; weeks 15-24 and 43-52; weeks 26-34; and weeks 16-25 and 41-50. While the durations of early warning (per year) estimated by the GLDE model were: weeks 7-24 and 36-51; weeks 13-37; weeks 11-26 and 39-54; weeks 23-35; and weeks 12-26 and 40-50. CONCLUSIONS: Compared to the LDE model, the GLDE model provides a better fit to the actual disease incidence data. The RWW appeared to be earlier when estimated with the GLDE model than the LDE model. In addition, the WRW estimated with the GLDE model were more lagged and had a longer warning time.

Oral pH sensitive GNS@ab nanoprobes for targeted therapy of Helicobacter pylori without disturbance gut microbiome.

How to eradicate Helicobacter pylori (H. pylori) in vivo with antibiotic resistance owns tremendous clinical requirement. Herein, gold nanostars were conjugated with acid-sensitive cis-aconitic anhydride modified anti-H. pylori polyclonal antibodies, resultant pH sensitive gold nanostars@H. pylori-antibodies nanoprobes (GNS@Ab) were employed for the theranostics of H. pylori in vivo. Photoacoustic imaging confirmed that prepared GNS@Ab could target actively H. pylori in the stomach. GNS@Ab nanoprobes could kill H. pylori in vivo in model animals under NIR laser irradiation, all GNS@Ab nanoprobes could be excreted out of gut within 7 days after oral administration. Gastric local lesion caused by H. pylori restored to normal status within one month. GNS@Ab nanoprobes within therapeutic doses did not damage intestinal bacteria imbalance. Forty clinical specimens of H. pylori with antibiotic resistance were verified validity of GNS@Ab nanoprobes. Prepared oral pH-sensitive GNS@Ab nanoprobes own clinical translational potential in the theranostics of H. pylori in near future.

Effect of Lasers on Dentine Hypersensitivity: Evidence From a Meta-analysis.

OBJECTIVES: The aim of the study was to evaluate the immediate and long-term desensitizing effect of lasers in reducing dentine hypersensitivity (DH) compared with negative controls. MATERIAL AND METHODS: Six databases were searched to identify relevant articles published up to June 8, 2018. Randomized controlled trials comparing lasers with placebo or no treatment control in adult patients who suffer from DH were included. The risk of bias was assessed according to the Cochrane guidelines, and the quality of the evidence was evaluated using the Grading of Recommendations Assessment, Development and Evaluation tool. Inverse-variance random effects meta-analyses of standardized mean differences and 95% confidence intervals were performed using the RevMan 5.3 software. RESULTS: Twenty-two randomized controlled trials were finally included in the meta-analysis, and 21 studies of these were conducted to analyze the immediate and long-term effects. All types of lasers had better immediate and long-term desensitizing effects on DH than negative controls. The quality of evidence of the included studies showed that lasers compared with negative controls had moderate-quality immediate and long-term effects on DH. The statistical heterogeneity of these comparisons was high, for which the result of I2 ranged from 90% to 98%. CONCLUSIONS: Our results indicate that all types of lasers had a better desensitizing effect on DH than negative controls, both in immediate and long term. Furthermore, more high-quality studies with a large sample size are needed to confirm our results (PROSPERO CRD42018102260).

Effects of desensitizing toothpastes on the permeability of dentin after different brushing times: An in vitro study.

PURPOSE: To investigate the effects of three commercially available desensitizing toothpastes on dentin permeability, and compare the efficacy of each product for reducing dentin permeability in the short term according to the frequency and duration of usage. METHODS: 100 dentin discs with no caries were prepared from freshly extracted human third molar teeth. The dentin discs were brushed with three desensitizing toothpastes or with a non-desensitizing toothpaste and distilled water, which served as control. The 100 dentin slices were randomly divided into two groups (n= 50): one group underwent continuous brushing (brushed for 3 minutes continuously), and the other group underwent discontinuous brushing (brushed three times, each time for 1 minute). Then, the two groups were divided into five subgroups (n = 10) for the five brushing applications. Dentin permeability was measured with a hydraulic permeability system before and after brushing. RESULTS: All desensitizing toothpastes reduced dentin permeability significantly after treatment. Sensodyne Repair and Protect (calcium sodium phosphosilicate) and discontinuous brushing reduced dentin permeability significantly compared with continuous brushing. Dentin permeability values showed no significant difference between the three toothpastes after 3 minutes of continuous brushing. When comparing the three toothpastes under discontinuous brushing conditions after 3 minutes, Sensodyne Repair and Protect (calcium sodium phosphosilicate) reduced dentin permeability significantly. CLINICAL SIGNIFICANCE: Sensodyne Repair and Protect (calcium sodium phosphosilicate) and discontinuous brushing reduced dentin permeability significantly compared with continuous brushing. Moreover, brushing with Sensodyne Repair and Protect (calcium sodium phosphosilicate) resulted in the lowest dentin permeability compared with those of the other two toothpastes. These results indicated that Sensodyne Repair and Protect may relieve dentin hypersensitivity.

Construction and validation of nano gold tripods for molecular imaging of living subjects.

Anisotropic colloidal hybrid nanoparticles exhibit superior optical and physical properties compared to their counterparts with regular architectures. We herein developed a controlled, stepwise strategy to build novel, anisotropic, branched, gold nanoarchitectures (Au-tripods) with predetermined composition and morphology for bioimaging. The resultant Au-tripods with size less than 20 nm showed great promise as contrast agents for in vivo photoacoustic imaging (PAI). We further identified Au-tripods with two possible configurations as high-absorbance nanomaterials from various gold multipods using a numerical simulation analysis. The PAI signals were linearly correlated with their concentrations after subcutaneous injection. The in vivo biodistribution of Au-tripods favorable for molecular imaging was confirmed using small animal positron emission tomography (PET). Intravenous administration of cyclic Arg-Gly-Asp-d-Phe-Cys (RGDfC) peptide conjugated Au-tripods (RGD-Au-tripods) to U87MG tumor-bearing mice showed PAI contrasts in tumors almost 3-fold higher than for the blocking group. PAI results correlated well with the corresponding PET images. Quantitative biodistribution data revealed that 7.9% ID/g of RGD-Au-tripods had accumulated in the U87MG tumor after 24 h post-injection. A pilot mouse toxicology study confirmed that no evidence of significant acute or systemic toxicity was observed in histopathological examination. Our study suggests that Au-tripods can be reliably synthesized through stringently controlled chemical synthesis and could serve as a new generation of platform with high selectivity and sensitivity for multimodality molecular imaging.

Vanadium extraction from steel slag: Generation, recycling and management.

The metal vanadium has superior physical and chemical properties and has a wide range of applications in many fields of modern industry. The increasing demand for vanadium worldwide has led to the need to guarantee sustainable vanadium production. The smelting process of vanadium and titanium magnetite produces vanadium-bearing steel slag, a key material for vanadium extraction. Herein, vanadium production, consumption, and steel slag properties are discussed. A detailed review of methods for extracting vanadium from vanadium-bearing steel slag is presented, including the most commonly used roasting and leaching method, and direct leaching, bioleaching and enhanced leaching methods are also described. Finally, the rules and regulations of steel slag management are introduced. In general, it is necessary to further develop environmentally friendly vanadium extraction methods and technologies from vanadium containing solid wastes. This study provides research directions for the technology of vanadium extraction from steel slag.

Enhancing the inhibition of dental erosion and abrasion with quercetin-encapsulated hollow mesoporous silica nanocomposites.

Introduction: Dental erosion and abrasion pose significant clinical challenges, often leading to exposed dentinal tubules and dentine demineralization. The aim of this study was to analyse the efficacy of quercetin-encapsulated hollow mesoporous silica nanocomposites (Q@HMSNs) on the prevention of dentine erosion and abrasion. Method: Q@HMSNs were synthesized, characterized, and evaluated for their biocompatibility. A total of 130 dentine specimens (2 mm × 2 mm × 2 mm) were prepared and randomly distributed into 5 treatment groups (n = 26): DW (deionized water, negative control), NaF (12.3 mg/mL sodium fluoride, positive control), Q (300 µg/mL quercetin), HMSN (5.0 mg/mL HMSNs), and Q@HMSN (5.0 mg/mL Q@HMSNs). All groups were submitted to in vitro erosive (4 cycles/d) and abrasive (2 cycles/d) challenges for 7 days. The specimens in the DW, NaF, and Q groups were immersed in the respective solutions for 2 min, while treatment was performed for 30 s in the HMSN and Q@HMSN groups. Subsequently, the specimens were subjected to additional daily erosion/abrasion cycles for another 7 days. The effects of the materials on dentinal tubule occlusion and demineralized organic matrix (DOM) preservation were examined by scanning electron microscopy (SEM). The penetration depth of rhodamine B fluorescein into the etched dentine was assessed using confocal laser scanning microscopy (CLSM). The erosive dentine loss (EDL) and release of type I collagen telopeptide (ICTP) were measured. The data were analysed by one-way analysis of variance (ANOVA) with post hoc Tukey's test (α = 0.05). Results: Q@HMSNs were successfully synthesized and showed minimal toxicity to human dental pulp stem cells (HDPSCs) and gingival fibroblasts (HGFs). Q@HMSNs effectively occluded the dentinal tubules, resulting in a thicker DOM in the Q@HMSN group. The CLSM images showed more superficial penetration in the HMSN and Q@HMSN groups than in the quercetin, NaF, and DW groups. The Q@HMSN group exhibited a significantly lower EDL and reduced ICTP levels compared to the other groups (p < 0.05). Conclusion: Q@HMSNs hold promise for inhibiting dentine erosion and abrasion by promoting tubule occlusion and DOM preservation.

Recognition and movement of polystyrene nanoplastics in fish cells.

Although nanoplastics are being increasingly scrutinized, little is known about their kinetic behavior in living organisms, especially in cellular systems. Herein, nonspecific interactions of three polystyrene nanoplastics (pristine-PS, NH2-PS, and COOH-PS, with size range of 90-100 nm and at concentrations of 0-100 µg mL-1) with zebrafish cells were quantified for their cellular uptake and exocytosis. Cell uptake of nanoplastics reached a peak within 2 h and then decreased. The overall nanoplastics uptake was dominated by PS-particle internalization. The estimated uptake rate was comparable among the different types of PS (pristine-PS, NH2-PS, and COOH-PS), but the uptake capacity was related to their functionality. The clathrin-mediated and caveolae-mediated pathways were mainly involved in the uptake of the three nanoplastics. The internalized PS-particles were initially delivered to the cytoplasm but then transported to lysosomes using energy. Meanwhile, these PS particles were released by the cells via energy-free penetration and energy-dependent lysosomal exocytosis. PS-particles were removed by the cells at a relatively slow rate, and the estimated retention half-lives of these PS-particles were 10.1 h, 12.0 h and 15.1 h for pristine-PS, NH2-PS and COOH-PS particles, respectively, in fish cells based on our kinetic measurements. Intracellular trajectory modeling of nanoplastics movement is critical for the environmental and human health risk assessment.

Oxyhemoglobin-Based Nanophotosensitizer for Specific and Synergistic Photothermal and Photodynamic Therapies against Porphyromonas gingivalis Oral Infection.

Photothermal therapy (PTT) and photodynamic therapy (PDT) are emerging alternative antibacterial approaches. However, due to the lack of selectivity of photosensitizers for pathogenic bacteria, these methods often show more or less different degrees of in vivo toxicity. Moreover, it is difficult for PDT to exert effective antibacterial effects against anaerobic infections due to the oxygen deficiency. As one of the major anaerobic pathogens in oral infections, Porphyromonas gingivalis (P. gingivalis) acquires iron and porphyrin mainly from hemoglobin in the host. Hence, we developed a nanophotosensitizer named as oxyHb@IR820 through stable complexation between oxyhemoglobin and IR820, which is a photosensitizer possessing both PTT and PDT performance, for fighting P. gingivalis oral infection specifically and efficiently. Owing to hydrophobic interaction, oxyHb@IR820 had much stronger photoabsorption at 808 nm than free IR820, and thus exhibited significantly enhanced photothermal conversion efficiency. As an oxygen donor, oxyHb played an important role in enhancing the photodynamic efficiency of oxyHb@IR820. More importantly, oxyHb@IR820 showed efficient and specific uptake in P. gingivalis and exerted synergistic PTT/PDT performance against P. gingivalis and oral infection in golden hamsters. In summary, this study provides an efficient strategy for delivering photosensitizers specifically to P. gingivalis and augmenting antibacterial PDT against anaerobic infections.

[Technical study of vinpocetine micelles prepared by thin-film hydration method].

OBJECTIVE: To prepare PEG-PLA polymeric micelles loaded with vinpocetine (VP). METHODS: VP micelles were prepared by thin-film hydration method, single factors affecting drug loading content, encapsulation efficiency, productivity, particle size and polydispersity index (PDI) such as dosage, type of organic solvent, quantity of organic solvent, hydration temperature, hydration speed, amount of hydration water, hydration time were investigated, and the optimum technology was obtained. The mean particle size and PDI were determined by DLS. The drug loading content, encapsulation efficiency, productivity of VP micelles were investigated by UV. RESULTS: The drug loading content and particle size of VP micelles were 20.35% and 118.3 nm, respectively. CONCLUSION: The technology of VP micelles prepared by thin-film hydration method is practical and simple. It's valuable to be further studied.

Differential cascading cellular and subcellular toxicity induced by two sizes of nanoplastics.

Nanoplastics (NPs) can be potentially accumulated by living organisms, but how they interact with cells at the cellular or subcellular level in the physiological environment is still largely unknown. In this study, time-resolved flow cytometry coupled with confocal imaging as well as other biomolecular approaches were used to investigate the cellular and subcellular responses to amine-modified polystyrene NPs of two different sizes (100 nm and 1000 nm). We first demonstrated that the two sizes of NPs displayed contrasting cytotoxicity to embryonic zebrafish fibroblast cell lines ZF4. Using the fluorescent-labeled NPs, the differentially internalized patterns between the two-sized NPs in a time-resolved manner were observed. Confocal images showed that the two sizes of NPs were deposited in lysosomes but could escape through lysosomal rupture, as evidenced by the induction of lysosomal acidification (for 1000 nm) and alkalization (for 100 nm) as well as permeabilization. Subsequent deposition of 100-NPs in the cytosol induced loss of mitochondrial membrane potential and significant reactive oxygen species production, and finally stimulated the activation of caspases, disrupted the mitochondrial mitophagy, leading to irreversible cell death. In contrast, 1000-NPs toxicity in ZF4 cells did not involve lysosomal permeabilization and loss of mitochondrial membrane potential. Lysosomal deposition of such larger sized nanoplastics mainly induced lysosome acidification, activated the autophagy as well as disrupted the integrity of cell membrane, but at the same time provoked the activation of caspases and finally triggered the apoptosis. Our study demonstrated a complicated relationship among lysosome damage, autophagy activation, and apoptosis, leading to contrasting toxicity of NPs of different sizes.

Advances and Prospects of Ultrasound Targeted Drug Delivery Systems Using Biomaterial-modified Micro/Nanobubbles for Tumor Therapy.

The incidence of malignant tumors is rising rapidly and tends to be in the younger, which has been one of the most important factors endangering the safety of human life. Ultrasound micro/nanobubbles, as a noninvasive and highly specific antitumor strategy, can reach and destroy tumor tissue through their effects of cavitation and acoustic perforation under the guidance of ultrasound. Meanwhile, micro/nanobubbles are now used as a novel drug carrier, releasing drugs at a target region, especially on the prospects of biomaterial-modified micro/nanobubbles as a dual modality for drug delivery and therapeutic monitoring. Successful evaluation of the sonoporation mechanism(s), ultrasound parameters, drug type, and dose will need to be addressed before translating this technology for clinical use. Therefore, this paper collects the literature on the experimental and clinical studies of ultrasound biomaterial-modified micro/nanobubbles therapy in vitro and in vivo in recent years.

Exposure to polystyrene microplastics reduces regeneration and growth in planarians.

The potential adverse effects of microplastics (MPs) on ecosystems and human health have received much attention in recent years. However, only limited data are available on the mechanisms for the uptake, distribution, and effects of MPs in freshwater organisms, especially with respect to tissue repair, regeneration and impairment of stem cell functions. To address this knowledge gap, we conducted exposure experiments in which planarians (Dugesia japonica) were exposed to polystyrene (PS)-MPs mixed in liver homogenate and examined the tissue growth and regeneration, stem cell functions, and oxidative stress. The body and blastema areas decreased upon exposure to PS-MPs, indicating that the growth and regeneration of planarians were delayed. The proliferation and differentiation processes of stem cells were inhibited, and the proportion of mitotic stem cells decreased, which may be related to the activation of the TGFß/SMAD4 and Notch signaling pathways. The enhancement of antioxidant enzyme activities and malondialdehyde on the first day of exposure to PS-MPs confirmed the oxidative stress response of planarians to PS-MPs. The present study demonstrated the likelihood of biotoxicity induced by PS-MPs. These results will provide clues for further investigations into the potential risks of PS-MPs to human stem cells.

Kartogenin-Conjugated Double-Network Hydrogel Combined with Stem Cell Transplantation and Tracing for Cartilage Repair.

The effectiveness of existing tissue-engineering cartilage (TEC) is known to be hampered by weak integration of biocompatibility, biodegradation, mechanical strength, and microenvironment supplies. The strategy of hydrogel-based TEC holds considerable promise in circumventing these problems. Herein, a non-toxic, biodegradable, and mechanically optimized double-network (DN) hydrogel consisting of polyethylene glycol (PEG) and kartogenin (KGN)-conjugated chitosan (CHI) is constructed using a simple soaking strategy. This PEG-CHI-KGN DN hydrogel possesses favorable architectures, suitable mechanics, remarkable cellular affinity, and sustained KGN release, which can facilitate the cartilage-specific genes expression and extracellular matrix secretion of peripheral blood-derived mesenchymal stem cells (PB-MSCs). Notably, after tracing the transplanted cells by detecting the rabbit sex-determining region Y-linked gene sequence, the allogeneic PB-MSCs are found to survive for even 3 months in the regenerated cartilage. Here, the long-term release of KGN is able to efficiently and persistently activate multiple genes and signaling pathways to promote the chondrogenesis, chondrocyte differentiation, and survival of PB-MSCs. Thus, the regenerated tissues exhibit well-matched histomorphology and biomechanical performance such as native cartilage. Consequently, it is believed this innovative work can expand the choice for developing the next generation of orthopedic implants in the loadbearing region of a living body.

Reduced-dose radiation in human papillomavirus-associated oropharyngeal carcinoma can improve outcome: a systematic review and meta-analysis.

Background: Despite its effectiveness, the standard course of chemoradiation for the treatment of human papillomavirus (HPV)-related oropharyngeal carcinoma (OPC) results in considerable treatment-related adverse effects. Studies proved that HPV-positive OPC is very sensitive to radiotherapy. Using de-escalation therapy as a new strategy is critical to maintaining positive outcomes while alleviating side effects. However, some studies hold that reduced dose causes insufficient effect on tumor killing. We conducted this systematic review and meta-analysis of survival and adverse reactions in patients with HPV-related OPC by retrospective analysis and evaluated the therapeutic effect of reducing the radiation dose. Methods: Data were double-selected and extracted by searching seven electronic databases, Original studies in all language treated HPV-associated OPC with reduced-dose and standard-dose therapies were included. Overall survival (OS), progression-free survival (PFS), and incidence rates of adverse events were obtained by pooling analyses. Statistical analyses were performed using RStudio Version 1.1.383 (RStudio, Boston, MA, USA) via the Meta-Analysis R Package (metafor). Heterogeneity was evaluated using the I2 statistic and the Cochran Q test. We used Stata (version 15.0) for forest graph. Results: Thirteen studies were included in this meta-analysis, involving a dose range of 66-70 Gy for the standard treatment regimen and <66 Gy for the reduced-dose group. There was no significant difference in the age of the patients in the standard and the reduced treatment groups (60.9±5.9 vs. 58.6±2.4 years). Nine studies were included as standard cohort and thirteen studies were enrolled as reduced-dose cohort. The 2- and 3-year overall survival rates in the reduced-dose group (95.66% and 91.51%, respectively) were superior to those in the standard-dose group (88.36% and 87.46%, respectively). There was no significant difference in PFS between the two groups. A systematic review of articles on dose reduction and the standard dose was also conducted. The most common complication in reduced-dose radiation was oral mucositis (36.4%), followed by decreased white blood cell (WBC) count (30.5%) and dry mouth (29.1%). Conclusions: Reducing the radiation dose in patients with HPV-related OPC substantially alleviates the treatment toxicities and optimizes the quality of life of patients while at the same time maintaining favorable oncologic outcomes.