Combination of solid acid and solvent pretreatment for co-production of furfural, xylooligosaccharide and reducing sugars from Phyllostachys edulis.

The efficient utilization of biomass resources has gained widespread attention in current research. This study focused on the conversion of hemicellulose into xylo-oligosaccharides and furfural, as well as enhanced cellulose saccharification and lignin removal from residual biomass. The solid acid catalyst AT-Sn-MMT was prepared by sulfonation and tin ion loading of montmorillonite K-10. In a mixture of deep eutectic solvent and γ-valerolactone (3:7, v/v), AT-Sn-MMT was used to catalyze Phyllostachys edulis (PE) at 160 °C for 20 min, obtaining a furfural yield of 85.7 % and 1.5 g/L xylo-oligosaccharides. The delignification of pretreated PE was 59.5 %, reaching an accessibility of 221.3 g dye/g material. While the enzymatic saccharification efficiency was increased to 73.1 %. This work drew on the merits of solid acid catalysts and mixed solvent systems, and this constructed pretreatment method could be efficiently applied for co-production of reducing sugars, xylooligosaccharide and furfural, realizing the efficient valorization of PE.

Enhancing enzymatic hydrolysis of waste sunflower straw by clean hydrothermal pretreatment.

Hydrothermal pretreatment is an effective way to change the lignocellulose structure and improve its saccharification. An efficient hydrothermal pretreatment of sunflower straw was conducted when the severity factor (LogR0) was 4.1. 58.8% of xylan and 33.5% of lignin were removed at 180 °C for 120 min with a solid-to-liquid ratio of 1:15. A series of characterizations (such as X-ray diffraction, Fourier Transform infrared spectroscopy, scanning electron microscopy, chemical component analysis, cellulase accessibility) proved that hydrothermal pretreatment destroyed sunflower straw surface structure, enlarged its pores, and enhanced the accessibility to cellulase (371.2 mg/g). After the enzymatic saccharification of treated sunflower straw for 72 h, 68.0% yield of reducing sugar and 61.8% yield of glucose were achieved, and 3.2 g/L xylo-oligosaccharide was obtained in the filtrate. Overall, this easy-to-operate and green hydrothermal pretreatment could effectively destroy the surface barrier of lignocellulose, help remove lignin and xylan, and increase the enzymatic hydrolysis efficiency.

Significantly enhanced enzymatic hydrolysis of waste rice hull through a novel surfactant-based deep eutectic solvent pretreatment.

The potential of green solvents, specifically deep eutectic solvents (DESs), has piqued the interest of researchers in the field of lignocellulose pretreatment. To enhance the enzymatic digestion efficiency of waste rice hull (RCH), an effective pretreatment approach was developed using the DES [AA][CATB], which was made with acetic acid (AA) and cetyltrimethylammonium bromide (CTAB). The results showed that [AA][CATB] improved enzymatic saccharification by 3.7 times compared to raw RCH and efficiently eliminated lignin and removed xylan. The improvement in enzymatic hydrolysis efficiency was then interpreted by a series of characterizations that showed a great morphological changed RCH with an obvious accessibility increase and a lignin surface area and hydrophobicity reduction. This work demonstrates that functional, and easily recoverable DESs have potential for improving the efficiency of lignocellulose pretreatment in biorefineries, providing a promising approach for developing green solvents and achieving more sustainable and efficient biorefinery processes.

Review of research on migration, distribution, biological effects, and analytical methods of microfibers in the environment.

Microplastics have been proven to be one of the critical environmental pollution issues. Moreover, microfibers, the most prominent form of microplastics in the environment, have likewise attracted the attention of various countries. With the increase in global population and industrialization, the production and use of fibers continue to increase yearly. As a result, a large number of microfibers are formed. If fiber products are not used or handled correctly, it will cause direct/indirect severe microfiber environmental pollution. Microfibers will be further broken into smaller fiber fragments when they enter the natural environment. Presently, researchers have conducted extensive research in the identification of microfibers, laying the foundation for further resourcefulness research. This work used bibliometric analysis to review the microfiber contamination researches systematically. First, the primary sources of microfibers and the influencing factors are analyzed. We aim to summarize the influence of the clothing fiber preparation and care processes on microfiber formation. Then, this work elaborated on the migration in/between water, atmosphere, and terrestrial environments. We also discussed the effects of microfiber on ecosystems. Finally, microfibers' current and foreseeable effective treatment, disposal, and resource utilization methods were explained. This paper will provide a structured reference for future microfiber research.