High-Temperature Soup Foods in Plastic Packaging Are Associated with Phthalate Body Burden and Expression of Inflammatory mRNAs: A Dietary Intervention Study.

Plastic packaging material is widely used to package high-temperature soup food in China, but this combination might lead to increased exposure to phthalates. The health effects and potential biological mechanisms have not been well studied. This study aimed to examine urinary phthalate metabolites and the expression of inflammatory cytokines in the blood before, during, and after a "plastic-packaged high-temperature soup food" dietary intervention in healthy adults. The results showed that compared with those in the preintervention period, urinary creatinine-adjusted levels of monomethyl phthalate (MMP), mono-n-butyl phthalate (MBP), mono-isobutyl phthalate (MIBP), and total phthalate metabolites in the intervention period were significantly higher, with increases of 71.6, 41.8, 38.8, and 29.8% for MMP, MBP, MIBP, and the total phthalate metabolites, respectively. After intervention, the mean levels of IL-1ß, IL-4, and TNF-α mRNA increased by 19.0, 21.5, and 25.0%, respectively, while IL-6 and IFN-γ mRNA decreased by 24.2 and 32.9%, respectively, when compared with the preintervention period. We also observed that several phthalates were associated with the mRNA or protein expression of IL-8, TNF-α, and IL-10. Therefore, consumption of plastic-packaged high-temperature soup food was linked to increased phthalate exposure and might result in significant changes in mRNA expression of several inflammatory cytokines.

Personal Guide Assisted Orthognathic Surgery: Application of a T-shaped Tooth Bone Combined Supporting Osteotomy Guide Plate and Positioning Guide Plate.

ABSTRACT: The precise movement of the maxilla is particularly important for orthognathic surgery, especially for patients with maxillary segmentation. In this preliminary study, the authors present a new tooth bone combined with a supporting osteotomy guide and positioning guide to guide the osteotomy and reduction of the maxilla. Through our preoperative simulation and postoperative image fusion, the authors found that the overlapping area is more than 90%. According to compare of the virtual plans and the postoperative results based on distances from the maxillary land- marks to the horizontal plane, sagittal plane, and coronal plane, the surgical error was about 2mm. Our T-shaped guide provides a reliable method for patients with maxillary segmental osteotomy, which may be a useful alternative to the intermediate.

Salt-Induced Regenerative Surface for Bacteria Killing and Release.

Antibacterial surfaces with both bacteria killing and release functions show great promise in biological and biomedical applications, in particular for reusable medical devices. However, these surfaces either require a sophisticated technique to create delicate structures or need rigorous stimuli to trigger the functions, greatly limiting their practical application. In this study, we made a step forward by developing a simple system based on a salt-responsive polyzwitterionic brush. Specifically, the salt-responsive brush of poly(3-(dimethyl (4-vinylbenzyl) ammonium) propyl sulfonate) (polyDVBAPS) was endowed with bactericidal function by grafting an effective bactericide, i.e., triclosan (TCS). This simple functionalization successfully integrated the bacteria attach/release function of polyDVBAPS and bactericidal function of TCS. As a result, the surface could kill more than 95% attached bacteria and, subsequently, could rapidly detach ∼97% bacteria after gently shaking in 1.0 M NaCl for 10 min. More importantly, such high killing efficiency and release rate could be well retained (unchanged effectiveness of both killing and release after four severe killing/release cycles), indicating the highly efficient regeneration and long-term reusability of this system. This study not only contributes zwitterionic polymers by conferring new functions but also provides a new, highly efficient and reliable surface for "killing-release" antibacterial strategy.

Preparation of Dental Resins Resistant to Enzymatic and Hydrolytic Degradation in Oral Environments.

The short average service life of traditional dental composite restorative materials and increasing occurrence of secondary caries adjacent to composite restorations and sealants are necessitating the development of new, longer lasting compositions. Novel monomers and their polymers, reinforcing fillers, and adhesive components are needed. The goal of this research is to develop resin systems for use in restorations, sealants, and other dental services that are superior in properties and endurance to currently used bisphenol A glycidyl dimethacrylate/triethylene glycol dimethacrylate (Bis-GMA/TEGDMA) and urethane-dimethacrylate products. Ether-based monomers and their polymers that were not susceptible to enzymatic or hydrolytic degradation were prepared and characterized. They showed no degradation under hydrolytic and enzymatic challenges, whereas the hydrolysis of ester links weakened contemporary resins within 16 days under these challenges. The success of the ether-based materials is promising in making durable systems that are subjected to long-term biochemical and hydrolytic challenges in oral environments.

Nanometabolomics Elucidated Biological Prospective of Mo4/3B2-x Nanosheets: Toward Metabolic Reprogramming of Amino Acid Metabolism.

Mo4/3B2-x nanosheets are newly developed, and 2D transition metal borides (MBene) were reported in 2021, but there is no report on their further applications and modification; hence, this article sheds light on the significance of potential biological prospects for future biomedical applications. Therefore, elucidation of the biocompatibility, biotoxicology, and bioactivity of Mo4/3B2-x nanosheets has been an urgent need to be fulfilled. Nanometabolomics (also referred as nanomaterials-based metabolomics) was first proposed and utilized in our previous work, which specialized in interpreting nanomaterials-induced metabolic reprogramming through aqueous metabolomics and lipidomics approach. Hence, nanometabolomics could be considered as a novel concept combining nanoscience and metabolomics to provide bioinformation on nanomaterials' biomedical applications. In this work, the safe range of concentration (<50 mg/L) with good biosafety toward human umbilical vein endothelial cells (HUVECs) was discovered. The low concentration (5 mg/L) and high concentration (50 mg/L) of Mo4/3B2-x nanosheets were utilized for the in vitro Mo4/3B2-x-cell interaction. Nanometabolomics has elucidated the biological prospective of Mo4/3B2-x nanosheets via monitoring its biocompatibility and metabolic shift of HUVECs. The results revealed that 50 mg/L Mo4/3B2-x nanosheets could lead to a stronger alteration of amino acid metabolism with disturbance of the corresponding amino acid-related pathways (including amino acid metabolism, amino acid degradation, fatty acid biosynthesis, and lipid biosynthesis and metabolism). These interesting results were closely involved with the oxidative stress and production of excess ROS. This work could be regarded as a pathbreaking study on Mo4/3B2-x nanosheets at a biological level, which also designates their further biochemical, medical, and industrial application and development based on nanometabolomics bioinformation.

Identification and Genomic Characterization of Two Novel Hepatoviruses in Shrews from Yunnan Province, China.

Hepatitis A virus (HAV), a member of the genus Hepatovirus (Picornaviridae HepV), remains a significant viral pathogen, frequently causing enterically transmitted hepatitis worldwide. In this study, we conducted an epidemiological survey of HepVs carried by small terrestrial mammals in the wild in Yunnan Province, China. Utilizing HepV-specific broad-spectrum RT-PCR, next-generation sequencing (NGS), and QNome nanopore sequencing (QNS) techniques, we identified and characterized two novel HepVs provisionally named EpMa-HAV and EpLe-HAV, discovered in the long-tailed mountain shrew (Episoriculus macrurus) and long-tailed brown-toothed shrew (Episoriculus leucops), respectively. Our sequence and phylogenetic analyses of EpMa-HAV and EpLe-HAV indicated that they belong to the species Hepatovirus I (HepV-I) clade II, also known as the Chinese shrew HepV clade. Notably, the codon usage bias pattern of novel shrew HepVs is consistent with that of previously identified Chinese shrew HepV. Furthermore, our structural analysis demonstrated that shrew HepVs differ from other mammalian HepVs in RNA secondary structure and exhibit variances in key protein sites. Overall, the discovery of two novel HepVs in shrews expands the host range of HepV and underscores the existence of genetically diverse animal homologs of human HAV within the genus HepV.

[A new type of nano-porous gold membrane for surface plasmon resonance biosensor].

Nano-porous gold membrane was fabricated by chemical etching method in the present work. The structures and the unique optical properties of the membrane were studied by scanning electron microscope and spectrometer. We creatively used the nano-porous gold membrane as the sensing layer for surface plasmon resonance biosensor. The results showed that, compared to the traditional evaporated gold film, the nano-porous gold membrane has a unique effect of localized surface plasmon resonance. The sensitivity of detecting the biological agents was obviously increased by the surface plasmon resonance biosensor assembling the nano-porous gold membrane. The fabrication method of the nano-porous gold membrane is simple and low-cost, so it absolutely can replace the use of traditional evaporated gold film.

[Studies on separation and purification of phenylethanoid glycosides from leaves of Forsythia suspensa by macroporous adsorption resin].

OBJECTIVE: To study the technology for separation and purification of phenylethanoid glycosides from leaves of Forsythia suspensa by macroporous adsorption resin. METHODS: The absorption and separation abilities of 10 kinds of adsorption resin were studied and the separation and purification technological process of phenylethanoid glycosides from leaves of Forsythia suspensa was investigated by HPLC with the content of Forsythoside A as an index. RESULTS: The optimal conditions were as follows: taking AB-8 resin column as adsorbent, the resin was washed by 20BV distilled water to remove impurity and 8BV 30% ethanol to elute phenylethanoid glycosides, the eluting velocity was 2BV/h, the content of Forsythoside A in the extract was 34.8%. CONCLUSION: The process with AB-8 resin is an effective method to separate and purify phenylethanoid glycosides.

Phase transformation behaviors and mechanical properties of NiTi endodontic files after gold heat treatment and blue heat treatment.

WaveOne Gold, ProTaper Gold, Reciproc Blue, ProTaper Next, WaveOne and ProTaper files were selected to compare the phase transformation behaviors and mechanical properties of nickel-titanium (NiTi) rotary files after gold heat and blue heat treatments. The reverse transformation finishing point temperatures of WaveOne Gold, ProTaper Gold, ProTaper Next and WaveOne were higher than those of the other two instruments investigated. At a deflection of 0.5 mm, the loads were significantly varied except for ProTaper Next and ProTaper Gold. At a deflection of 3.0 mm, the loads of Reciproc Blue and WaveOne Gold were significantly varied compared to WaveOne and ProTaper. Cycles to failure were reduced in the order of WaveOne Gold, Reciproc Blue, ProTaper Gold, ProTaper Next, WaveOne and ProTaper. NiTi instruments after gold heat and blue heat treatments exhibited significantly higher bending properties and cyclic fatigue resistances, representing an improved performance over traditional and M-wire instruments.

Novel targeting of PEGylated liposomes for codelivery of TGF-ß1 siRNA and four antitubercular drugs to human macrophages for the treatment of mycobacterial infection: a quantitative proteomic study.

Tuberculosis (TB) is still a major public health issue in developing countries, and its chemotherapy is compromised by poor drug compliance and severe side effects. This study aimed to synthesize and characterize new multimodal PEGylated liposomes encapsulated with clinically commonly used anti-TB drugs with linkage to small interfering RNA (siRNA) against transforming growth factor-ß1 (TGF-ß1). The novel NP-siRNA liposomes could target THP-1-derived human macrophages that were the host cells of mycobacterium infection. The biological effects of the NP-siRNA liposomes were evaluated on cell cycle distribution, apoptosis, autophagy, and the gene silencing efficiency of TGF-ß1 siRNA in human macrophages. We also explored the proteomic responses to the newly synthesized NP-siRNA liposomes using the stable isotope labeling with amino acids in cell culture approach. The results showed that the multifunctional PEGylated liposomes were successfully synthesized and chemically characterized with a mean size of 265.1 nm. The novel NP-siRNA liposomes functionalized with the anti-TB drugs and TGF-ß1 siRNA were endocytosed efficiently by human macrophages as visualized by transmission electron microscopy and scanning electron microscopy. Furthermore, the liposomes showed a low cytotoxicity toward human macrophages. There was no significant effect on cell cycle distribution and apoptosis in THP-1-derived macrophages after drug exposure at concentrations ranging from 2.5 to 62.5 µg/mL. Notably, there was a 6.4-fold increase in the autophagy of human macrophages when treated with the NP-siRNA liposomes at 62.5 µg/mL. In addition, the TGF-ß1 and nuclear factor-κB expression levels were downregulated by the NP-siRNA liposomes in THP-1-derived macrophages. The Ingenuity Pathway Analysis data showed that there were over 40 signaling pathways involved in the proteomic responses to NP-siRNA liposome exposure in human macrophages, with 160 proteins mapped. The top five canonical signaling pathways were eukaryotic initiation factor 2 signaling, actin cytoskeleton signaling, remodeling of epithelial adherens junctions, epithelial adherens junction signaling, and Rho GDP-dissociation inhibitor signaling pathways. Collectively, the novel synthetic targeting liposomes represent a promising delivery system for anti-TB drugs to human macrophages with good selectivity and minimal cytotoxicity.

Dual-biomimetic superhydrophobic electrospun polystyrene nanofibrous membranes for membrane distillation.

A new type of dual-biomimetic hierarchically rough polystyrene (PS) superhydrophobic micro/nano-fibrous membrane was fabricated via a one-step electrospinning technique at various polymer concentrations from 15 to 30 wt %. The obtained micro/nano-fibers exhibited a nanopapillose, nanoporous, and microgrooved surface morphology that originated from mimicking the micro/nanoscale hierarchical structures of lotus leaf and silver ragwort leaf, respectively. Superhydrophobicity and high porosity of such resultant electrospun nanofibrous membranes make them attractive candidates for membrane distillation (MD) application with low energy water recovery. In this study, two kinds of optimized PS nanofibrous membranes with different thicknesses were applied for desalination via direct contact MD. The membranes maintained a high and stable permeate water vapor flux (104.8 ± 4.9 kg/m(2)·h, 20 g/L NaCl salt feed for a thinner PS nanofibrous membrane with thickness of 60 µm; 51 ± 4.5 kg/m(2)·h, 35 g/L NaCl salt feed for the thicker sample with thickness of 120 µm; ΔT = 50 °C) for a test period of 10 h without remarkable membrane pores wetting detected. These results were better than those of typical commercial polyvinylidene fluoride (PVDF) MD membranes or related PVDF nanofibrous membranes reported in literature, suggesting excellent competency of PS nanofibrous membranes for MD applications.

Hedgehog signaling pathway regulates human pancreatic cancer cell proliferation and metastasis.

Pancreatic cancer is one of the most aggressive and devastating malignancies. The Hedgehog (Hh) pathway has been reported to play an important role in pancreatic cancer development and progression. The aim of this study was to examine the activation of the Hh pathway in human pancreatic cancer tissue samples and pancreatic cancer cell lines, and the molecular mechanisms involved in the Hh pathway mediated effects on pancreatic cancer cell proliferation and invasion. The expression levels of Hh molecules in human pancreatic cancer tissue samples and pancreatic cancer cell lines were evaluated using RT-PCR. The role of the Hh pathway in cell proliferation and invasion was evaluated using flow cytometry, MTT, colony formation assays and transwell invasion assays, and the expression of cancer stem cell markers and epithelial-mesenchymal transition (EMT) were evaluated using flow cytometry and RT-PCR. Tumorigenicity assays were used to further investigate the role of the Hh pathway in vivo. Hh molecules were highly expressed in human pancreatic cancer tissue samples and pancreatic cancer cell lines. Inhibition of the Hh pathway notably decreased cell proliferation and induced apoptosis through inhibition of the PI3K/AKT pathway and cancer stem cells. Furthermore, inhibition of the Hh signaling pathway significantly inhibited EMT by suppressing the activation of transcription factors Snail and Slug, which are correlated with significantly reduced pancreatic cancer cell invasion, suggesting that the Hh signaling pathway is involved in early metastasis. These results indicate that activation of the Hh pathway is a common event. Inhibition of the Hh pathway may be a potential molecular target of new therapeutic strategies for pancreatic cancer.

Bionic electrospun ultrafine fibrous poly(L-lactic acid) scaffolds with a multi-scale structure.

Poly(L-lactic acid) (PLLA) tissue engineering scaffolds with porous inner structures of individual fibers and controllable architectures were successfully fabricated from the homogeneous polymer-solvent-nonsolvent system (PLLA, CH(2)Cl(2) and DMF) by a single capillary electrospinning with certain conductive patterned templates as fiber collectors. PLLA was dissolved in dimethylformamide (DMF) and methylene chloride (CH(2)Cl(2)) mixed solvent with different ratios. Semi-hollow fiber with porous inner structure and compact shell wall was formed by controlling the content of DMF in the mixed solvents. It is believed that the phase separation should be the key origin for the formation of this microstructure. In order to mimic the natural extracellular matrix (ECM) with a specific structure, conductive patterned collectors were designed and employed to manufacture PLLA ultrafine fibrous scaffolds with three-dimensional architectures. We believe these kinds of multi-scale biodegradable fibrous scaffolds with specific microstructure and macro-architectures could make the electrospun fibrous scaffold better mimic the natural extracellular matrix to satisfy tissue engineering.