Different biomechanical effects of clear aligners in closing maxillary and mandibular extraction spaces: Finite element analysis.

INTRODUCTION: Compared with fixed treatments, clear aligners (CAs) have the advantages of comfort, esthetics, and hygiene, and are popular among patients and orthodontists. However, CAs exhibit control deficiencies in extraction patients because of insufficient root control and retention effects. These deficiencies can magnify biomechanical differences in bimaxillary dentition, further causing different orthodontic requirements between maxillary and mandibular dentition. This study aimed to elaborate on the biomechanical characteristics of bimaxillary dentition in extraction space closure and provided feasible biomechanical compensation strategies for use in clinical practice. METHODS: We constructed a 3-dimensional (3D) bimaxillary model based on patient data. Several 3D modeling-related software was used to generate a standard first premolar extraction model, CAs, and attachments. Subsequently, finite element analysis was performed to demonstrate the biomechanical effects. RESULTS: The maxillary and mandibular dentition showed a roller coaster effect during space closure. Compared with the maxillary dentition, the mandibular posterior teeth exhibited stronger relative anchorage causing greater anterior teeth retraction. The tipping and vertical movements of the anterior teeth were related to tooth length. The longer the anterior tooth, the less tipping and greater vertical displacement occurred. Generally, when having the same retraction distance, the mandibular dentition exhibited greater retroclination and fewer extrusions. Both mechanical and retention compensations should be considered to prevent these unwanted tipping movements. Adding specific attachments to bimaxillary dentitions compensated for the retention and root control deficiencies of CAs. CONCLUSIONS: When applying CAs to extraction patients, different biomechanical effects can present in the bimaxillary dentition because of specific dentition morphologies. To effectively treat these patients, mechanical compensation through overcorrection of the target position should be designed on the basis of bimaxillary control deficiencies, and retention compensation by adding specific attachments should also be considered according to the overcorrections.

Finite element analysis of the biomechanical effect of clear aligners in extraction space closure under different anchorage controls.

INTRODUCTION: Clear aligners (CAs) have attracted increasing attention from patients and orthodontists because of their excellent esthetics and comfort. However, treating tooth extraction patients with CAs is difficult because their biomechanical effects are more complicated than those of traditional appliances. This study aimed to analyze the biomechanical effect of CAs in extraction space closure under different anchorage controls, including moderate, direct strong, and indirect strong anchorage. It could provide several new cognitions for anchorage control with CAs through finite element analysis, further directing clinical practice. METHODS: A 3-dimensional maxillary model was generated by combining cone-beam computed tomography and intraoral scan data. Three-dimensional modeling software was used to construct a standard first premolar extraction model, temporary anchorage devices, and CAs. Subsequently, finite element analysis was performed to simulate space closure under different anchorage controls. RESULTS: Direct strong anchorage was beneficial for reducing the clockwise occlusal plane rotation, whereas indirect anchorage was conducive for anterior teeth inclination control. In the direct strong anchorage group, an increase in the retraction force would require more specific anterior teeth overcorrection to resist the tipping movement, mainly including lingual root control of the central incisor, followed by distal root control of the canine, lingual root control of the lateral incisor, distal root control of the lateral incisor, and distal root control of the central incisor. However, the retraction force could not eliminate the mesial movement of the posterior teeth, possibly causing a reciprocating motion during treatment. In indirect strong groups, when the button was close to the center of the crown, the second premolar presented less mesial and buccal tipping but more intrusion. CONCLUSIONS: The 3 anchorage groups showed significantly different biomechanical effects in both the anterior and posterior teeth. Specific overcorrection or compensation forces should be considered when using different anchorage types. The moderate and indirect strong anchorages have a more stable and single-force system and could be reliable models in investigating the precise control of future tooth extraction patients.

Assessment of the oral health behavior, knowledge and status among dental and medical undergraduate students: a cross-sectional study.

BACKGROUND: It is widely accepted that oral health plays an important role in overall health. Both dental and medical students are expected to possess good oral health awareness and work together for public oral health promotion especially in developing countries like China. The aim of this study was to assess the oral health knowledge, behavior and status of dental and medical undergraduate students in the first (fresh) and third year (before specialized courses) study. METHODS: A self-administered structured questionnaire with 13 questions was designed based on oral health knowledge, behavior and status and a cross-sectional study was conducted among the 1st, 3rd year dental students (1DS, 3DS) and medical students (1MS, 3MS) of Sichuan University in Chengdu, China, in the period of September-December 2017. The data was analyzed by chi-square test using IBM SPSS Statistics v. 21.0. RESULTS: The oral health behavior, consciousness and status of the 1st, 3rd year medical and dental students were not optimistic. Dental freshmen were slightly superior to the medical ones in terms of the brushing methods and the awareness of oral disease-systemic disease relationship. The junior dental students showed highly significant improvement than their counterparts, mainly in the items about frequency of brushing teeth, brushing methods of vertical scrub or Bass technique (66.3%), usage of floss or mouth wash (49.7%), causes of caries, periodontal diseases and system diseases (56.9-83.4%). The rates mentioned above were 36.1, 15.8%, 26.7-43.6% among 3MS, respectively. In terms of oral health status, significant differences were only observed in junior students. The prevalence rates of bad breath, gum bleeding, and tooth discoloration among 3DS were obviously lower than those of 3MS. However, only a total of 17.2% junior students had a good oral health, including 23.8% dental students and 11.4% medical students. CONCLUSIONS: Our study provided a new understanding of oral health knowledge, behavior and status among dental and medical students, which may help to promote the reform of oral health education and establish a model for clinicians and dentists to work together for improving oral health.

Multifunctional polypyrrole@Fe(3)O(4) nanoparticles for dual-modal imaging and in vivo photothermal cancer therapy.

Magnetic Fe3 O4 crystals are produced in situ on preformed polypyrrole (PPY) nanoparticles by rationally converting the residual Fe species in the synthetic system. The obtained PPY@Fe(3)O(4)composite nanoparticles exhibit good photostability and biocompatibility, and they can be used as multifunctional probes for MRI, thermal imaging, and photothermal ablation of cancer cells.

Effects of acid etching and adhesive treatments on host-derived cysteine cathepsin activity in dentin.

PURPOSE: To analyze the effects of different processes during bonding on endogenous cysteine cathepsin activity in dentin. MATERIALS AND METHODS: Dentin powder, prepared from extracted human third molars, was divided into 10 groups. Two lots of dentin powder were used to detect the effects of the procedure of protein extraction on endogenous cathepsin activity. The others were used to study effects of different acid-etching or adhesive treatments on enzyme activity. Concentrations of 37% phosphoric acid or 10% phosphoric acid, two etch-and-rinse adhesive systems, and two self-etching adhesive systems were used as dentin powder treatments. The untreated mineralized dentin powder was set as the control. After treatment, the proteins of each group were extracted. The total cathepsin activity in the extracts of each group was monitored with a fluorescence reader. RESULTS: In the control group, there were no significant differences in cathepsin activity between the protein extract before EDTA treatment and the protein extract after EDTA treatment (p > 0.05). The cathepsin activities of the three different extracts in the 37% phosphoric acid-treated group were different from each other (p < 0.05). The two acid-etching groups and two etch-and-rinse groups showed significant enzyme activity reduction vs the control group (p < 0.05). There were no significant differences between those four groups (p > 0.05). Treating the dentin powder with any of the two self-etching adhesives resulted in an increase in cathepsin activity (p < 0.05). CONCLUSIONS: The activity of cysteine cathepsins can be detected in dentin powder. Treatment with EDTA during protein extraction exerted an influence on cathepsin activity. Acid etching or etch-and-rinse adhesive systems may reduce the activity of endogenous cathepsins in dentin. Self-etching adhesive systems may increase the enzyme activity.

Targeted dexamethasone nano-prodrug for corneal neovascularization management.

BACKGROUND: To overcome the drawbacks of traditional therapy for corneal neovascularization (CNV), we evaluated the efficacy of polyethylene glycol (PEG)-conjugated Ala-Pro-Arg-Pro-Gly (APRPG) peptide modified dexamethasone (Dex), a novel nano-prodrug (Dex-PEG-APRPG, DPA). METHODS: Characterization of DPA nano-prodrug were measured with transmission electron microscopy (TEM) and dynamic light scattering (DLS) analyses. Cytotoxicity and effects on cell migration and tube formation of DPA were evaluated in vitro. A murine CNV model was established by cornea alkali burn. The injured corneas were given eye drops of DPA (0.2 mM), Dex solution (0.2 mM), Dexp (2 mM), or normal saline three times a day. After two weeks, eyes were obtained for the analysis of histopathology, immunostaining, and mRNA expression. RESULTS: DPA with an average diameter of 30 nm, presented little cytotoxicity and had good ocular biocompatibility. More importantly, DPA showed specific targeting to vascular endothelial cells with efficient inhibition on cell migration and tube formation. In a mouse CNV model, clinical, histological, and immunohistochemical examination results revealed DPA had a much stronger angiogenesis suppression than Dex, resembling a clinical drug with an order of magnitude higher concentration. This was ascribed to the significant downregulations in the expression of pro-angiogenic and pro-inflammatory factors in the corneas. In vivo imaging results also demonstrated that APRPG could prolong ocular retention time. CONCLUSIONS: This study suggests that DPA nano-prodrug occupies advantages of specific targeting ability and improved bioavailability over conventional therapy, and holds great potential for safe and efficient CNV therapy.

Rosmarinic acid-grafted gelatin nanogels for efficient diquafosol delivery in dry eye disease therapy.

Dry eye disease (DED) is a prevalent ocular disorder characterized by unstable tear film condition with loss of aqueous or mucin, excessive oxidative stress, and inflammation, leading to discomfort and potential damage to the ocular surface. Current DED therapies have shown restricted therapeutic effects such as frequent dosing and temporary relief with potential unwanted side effects, urgently necessitating the development of innovative efficient therapeutic approaches. Herein, we developed rosmarinic acid (RosA) conjugated gelatin nanogels loading diquafosol sodium (DQS), DRGNG, for simultaneous ROS-scavenging and mucin-secreting DED treatment. Mechanically, DRGNG suppressed the ROS production, reduced inflammatory factors, and prompted mucin secretion in vitro and in vivo. The whole transcriptome RNA sequencing in vitro further provided a detailed analysis of the upregulation of anti-oxidant, anti-inflammatory, and mucin-promotion pathways. Therapeutically, both in evaporative DED and aqueous deficient DED models, the dual-functional DRGNG could prolong the retention time at the ocular surface, efficiently suppress the oxidative stress response, reverse ocular surface morphology, and recover tear film homeostasis, thus alleviating the DED when the dosage is halved compared to the commercial Diquas®. Our findings contribute to developing innovative therapies for DED and offer insights into the broader applications of nanogels in ocular drug delivery and oxidative stress-related conditions.

Immunocompatible elastomer with increased resistance to the foreign body response.

Polymeric elastomers are extensively employed to fabricate implantable medical devices. However, implantation of the elastomers can induce a strong immune rejection known as the foreign body response (FBR), diminishing their efficacy. Herein, we present a group of immunocompatible elastomers, termed easy-to-synthesize vinyl-based anti-FBR dense elastomers (EVADE). EVADE materials effectively suppress the inflammation and capsule formation in subcutaneous models of rodents and non-human primates for at least one year and two months, respectively. Implantation of EVADE materials significantly reduces the expression of inflammation-related proteins S100A8/A9 in adjacent tissues compared to polydimethylsiloxane. We also show that inhibition or knockout of S100A8/A9 leads to substantial attenuation of fibrosis in mice, suggesting a target for fibrosis inhibition. Continuous subcutaneous insulin infusion (CSII) catheters constructed from EVADE elastomers demonstrate significantly improved longevity and performance compared to commercial catheters. The EVADE materials reported here may enhance and extend function in various medical devices by resisting the local immune responses.

An elastomer with in situ generated pure zwitterionic surfaces for fibrosis-resistant implants.

Polymeric elastomers are widely utilized in implantable biomedical devices. Nevertheless, the implantation of these elastomers can provoke a robust foreign body response (FBR), leading to the rejection of foreign implants and consequently reducing their effectiveness in vivo. Building effective anti-FBR coatings on those implants remains challenging. Herein, we introduce a coating-free elastomer with superior immunocompatibility. A super-hydrophilic anti-fouling zwitterionic layer can be generated in situ on the surface of the elastomer through a simple chemical trigger. This elastomer can repel the adsorption of proteins, as well as the adhesion of cells, platelets, and diverse microbes. The elastomer elicited negligible inflammatory responses after subcutaneous implantation in rodents for 2 weeks. No apparent fibrotic capsule formation was observed surrounding the elastomer after 6 months in rodents. Continuous subcutaneous insulin infusion (CSII) catheters constructed from the elastomer demonstrated prolonged longevity and performance compared to commercial catheters, indicating its great potential for enhancing and extending the performance of various implantable biomedical devices by effectively attenuating local immune responses. STATEMENT OF SIGNIFICANCE: The foreign body response remains a significant challenge for implants. Complicated coating procedures are usually needed to construct anti-fibrotic coatings on implantable elastomers. Herein, a coating-free elastomer with superior immunocompatibility was achieved using a zwitterionic monomer derivative. A pure zwitterionic layer can be generated on the elastomer surface through a simple chemical trigger. This elastomer significantly reduces protein adsorption, cell and bacterial adhesion, and platelet activation, leading to minimal fibrotic capsule formation even after six months of subcutaneous implantation in rodents. CSII catheters constructed from the PQCBE-H elastomer demonstrated prolonged longevity and performance compared to commercial catheters, highlighting the significant potential of PQCBE-H elastomers for enhancing and extending the performance of various implantable biomedical devices.

Poly(Glutamic Acid-Lysine) Hydrogels with Alternating Sequence Resist the Foreign Body Response in Rodents and Non-Human Primates.

The foreign body response (FBR) to implanted biomaterials and biomedical devices can severely impede their functionality and even lead to failure. The discovery of effective anti-FBR materials remains a formidable challenge. Inspire by the enrichment of glutamic acid (E) and lysine (K) residues on human protein surfaces, a class of zwitterionic polypeptide (ZIP) hydrogels with alternating E and K sequences to mitigate the FBR is prepared. When subcutaneously implanted, the ZIP hydrogels caused minimal inflammation after 2 weeks and no obvious collagen capsulation after 6 months in mice. Importantly, these hydrogels effectively resisted the FBR in non-human primate models for at least 2 months. In addition, the enzymatic degradability of the gel can be controlled by adjusting the crosslinking degree or the optical isomerism of amino acid monomers. The long-term FBR resistance and controlled degradability of ZIP hydrogels open up new possibilities for a broad range of biomedical applications.

Site-specific growth of Au-Pd alloy horns on Au nanorods: a platform for highly sensitive monitoring of catalytic reactions by surface enhancement Raman spectroscopy.

Surface-enhanced Raman scattering (SERS) is a highly sensitive probe for molecular detection. The aim of this study was to develop an efficient platform for investigating the kinetics of catalytic reactions with SERS. To achieve this, we synthesized a novel Au-Pd bimetallic nanostructure (HIF-AuNR@AuPd) through site-specific epitaxial growth of Au-Pd alloy horns as catalytic sites at the ends of Au nanorods. Using high-resolution electron microscopy and tomography, we successfully reconstructed the complex three-dimensional morphology of HIF-AuNR@AuPd and identified that the horns are bound with high-index {11l} (0.25 < l < 0.43) facets. With an electron beam probe, we visualized the distribution of surface plasmon over the HIF-AuNR@AuPd nanorods, finding that strong longitudinal surface plasmon resonance concentrated at the rod ends. This unique crystal morphology led to the coupling of high catalytic activity with a strong SERS effect at the rod ends, making HIF-AuNR@AuPd an excellent bifunctional platform for in situ monitoring of surface catalytic reactions. Using the hydrogenation of 4-nitrothiophenol as a model reaction, we demonstrated that its first-order reaction kinetics could be accurately determined from this platform. Moreover, we clearly identified the superior catalytic activity of the rod ends relative to that of the rod bodies, owing to the different SERS activities at the two positions. In comparison with other reported Au-Pd bimetallic nanostructures, HIF-AuNR@AuPd offered both higher catalytic activity and greater detection sensitivity.

Single-cell transcriptional profiling reveals immunomodulatory properties of stromal and epithelial cells in periodontal immune milieu with diabetes in rats.

Periodontitis is the sixth major complication of diabetes. Gingiva, as an important component of periodontal tissues, serves as the first defense barrier against infectious stimuli. However, relatively little is known about cellular heterogeneity and cell-specific changes in gingiva in response to diabetes-associated periodontitis. To characterize molecular changes linking diabetes with periodontitis, we profiled single-cell transcriptome analyses of a total of 45,259 cells from rat gingiva with periodontitis under normoglycemic and diabetic condition. The single-cell profiling revealed that stromal and epithelial cells of gingiva contained inflammation-related subclusters enriched in functions of immune cell recruitment. Compared to normoglycemic condition, diabetes led to a reduction in epithelial basal cells, fibroblasts and smooth muscle cells in gingiva with periodontitis. Analysis of differentially expressed genes indicated that stromal and epithelial populations were reprogrammed towards pro-inflammatory phenotypes promoting immune cell recruitment in diabetes-related periodontitis. In aspect of immune cells, diabetes prominently enhanced neutrophil and M1 macrophage infiltration in periodontitis lesions. Cell-cell communications revealed enhanced crosstalk between stromal/epithelial cells and immune cells mediating by chemokine/chemokine receptor interplay in diabetes-associated periodontitis. Our findings deconvolved cellular heterogeneity of rat gingiva associated with periodontitis and diabetes, uncovered altered immune milieu caused by the disease, and revealed immunomodulatory functions of stromal and epithelial cells in gingival immune niche. The present study improves the understanding of the link between the diabetes and periodontitis and helps in formulating precise therapeutic strategies for diabetes-enhanced periodontitis.

Comparison Study of Anterior Capsule Contraction of Hydrophilic and Hydrophobic Intraocular Lenses Under the Same Size Capsulotomy.

Purpose: To compare anterior capsule contraction of two kinds of hydrophilic and hydrophobic acrylic intraocular lenses (IOLs) under the same size capsulotomy with femtosecond laser-assisted cataract surgery (FLACS). Methods: A total of 320 eyes in 320 patients who underwent FLACS were included. The patients were scheduled to have hydrophilic acrylic IOLs (MI60, 509M) and hydrophobic acrylic IOLs (iSert250, ZCB00) implanted. Visual acuity and anterior segment photography using a slit lamp microscope were performed at postoperative one week, one month, three months, and one year. Results: The contraction of the anterior capsule opening area (mm2) and circumference (mm) in the hydrophilic group were larger than that of the hydrophobic group from postoperative one week to one year (P < 0.001, P < 0.001, respectively). The postoperative contraction of the capsule opening area in MI60 was larger than in 509M (P < 0.001) and larger in 509M than in iSert250 and ZCB00 (P = 0.008, P = 0.019, respectively), but no difference was observed between iSert250 and ZCB00 (P = 0.867). During postoperative one to three months, all groups had the maximum capsule contraction (P < 0.001). Conclusions: Under the same size capsulotomy with FLACS, the postoperative anterior capsule contraction induced by hydrophobic IOLs was less than that induced by hydrophilic IOLs. Among the four IOLs, the capsule contraction was largest in MI60, followed by 509M, and least in iSert250 and ZCB00, which was time-dependent. Translational Relevance: Our findings implied that patients with a high risk of ACC should choose hydrophobic IOLs, as well as nonsteroidal anti-inflammatory drugs may be used for a longer period in patients with high risk of capsule contraction syndrome.

The effect of platelet-rich concentrates on orthodontic tooth movement: A review of randomized controlled trials.

Objectives: Platelet-rich concentrates, namely platelet-rich plasma (PRP) and platelet-rich fibrin (PRF), have recently shown potential roles in accelerating orthodontic tooth movement (OTM) and reducing treatment duration. Our study aims to systematically evaluate the effect of platelet-rich concentrates on OTM. Materials and methods: An electronic search of 11 databases, followed by a hand search of reference lists of eligible studies and related reviews, was conducted up to January 2022. Randomized controlled trials investigating OTM of patients with platelet-rich concentrates were included. Risk of bias was assessed by version 2 of Cochrane tool (RoB 2) for assessing risk of bias in randomized trials. Results: Among 715 records initially identified, 9 studies were included, of which 3 used PRP and the other 6 applied PRF. 7 studies supported a positive relationship between platelet-rich concentrates and OTM, but the other 2 studies reported a null and a negative effect of PRF, respectively. The overall qualities of evidence were moderate to high. Conclusions: Platelet-rich concentrates as PRP and PRF seem to be effective in accelerating OTM at early stages, while their long-term efficacy remains controversial. Repeated application of platelet concentrates may increase the accelerated stability of OTM.

Different biomechanical effects of clear aligners in bimaxillary space closure under two strong anchorages: finite element analysis.

BACKGROUND: Clear aligner (CA) treatment has been gaining popularity, but the biomechanical effects of CAs in bimaxillary dentition have not been thoroughly investigated. Direct and indirect strong anchorages are two common anchorage control methods, but the underlying biomechanical mechanism has not yet been elucidated. This study aimed to investigate the different biomechanical effects of CAs in closing the bimaxillary space under different anchorage controls, further instructing the compensation strategies design and strong anchorage choice in clinical practice. METHODS: Three-dimensional (3D) bimaxillary models of different anchorage controls were created based on cone-beam computed tomography and intraoral scan data. Four first premolars were extracted using 3D modeling software. Finite element analysis was conducted to simulate the space closure process of the CAs. RESULTS: In the two strong anchorage groups, the bimaxillary dentition presented different movement patterns during the space closure process, and the lower dentition was more vulnerable to elastic force. From the vertical view, direct strong anchorage with elastic force had the advantage of flattening the longitudinal occlusal curve and resisting the roller-coaster effects, whereas indirect strong anchorage could lead to a deep longitudinal occlusal curve. From the sagittal view, indirect strong anchorage with metallic ligaments had a greater instantaneous anchorage protection effect, particularly in the lower dentition, which reduced the mesial movement of the posterior teeth by nearly four times that of the direct anchorage group. In addition, indirect strong anchorage presented better anterior teeth torque/tipping control, while direct strong anchorage could aggravate lingual tipping of the upper central incisors. Due to the differences in anterior-posterior anchorage and arch shape, compared with the upper dentition, anchorage preservation and vertical control effects were amplified in the lower dentition. CONCLUSIONS: The biomechanical effects of CAs differed between the two strong anchorage groups. Due to the differences in dentition morphology, anterior-posterior anchorage, and dental arch shape, CAs present different biomechanical effects in bimaxillary space closure. Orthodontists should consider the corresponding mechanical compensation according to specific anchorage control methods and dentitions.

Precisely Tuning the Pore-Wall Surface Composition of Bioceramic Scaffolds Facilitates Angiogenesis and Orbital Bone Defect Repair.

Orbital bone damage (OBD) may result in severe post-traumatic enophthalmos, craniomaxillofacial deformities, vision loss, and intracranial infections. However, it is still a challenge to fabricate advanced biomaterials that can match the individual anatomical structure and enhance OBD repair in situ. Herein, we aimed to develop a selective surface modification strategy on bioceramic scaffolds and evaluated the effects of inorganic or organic functional coating on angiogenesis and osteogenesis, ectopically and orthotopically in OBD models. It was shown that the low thermal bioactive glass (BG) modification or layer-by-layer assembly of a biomimetic hydrogel (Biogel) could readily integrate into the pore wall of the bioceramic scaffolds. The BG and Biogel modification showed appreciable enhancement in the initial compressive strength (∼30-75%) or structural stability in vivo, respectively. BG modification could enhance by nearly 2-fold the vessel ingrowth, and the osteogenic capacity was also accelerated, accompanied with a mild scaffold biodegradation after 3 months. Meanwhile, the Biogel-modified scaffolds showed enhanced osteogenic differentiation and mineralization through calcium and phosphorus retention. The potential mechanism of the enhanced bone repair was elucidated via vascular and osteogenic cell responses in vitro, and the cell tests indicated that the Biogel and BG functional layers were both beneficial for in vitro osteoblastic differentiation and mineralization on bioceramics. Totally, these findings demonstrated that the bioactive ions or biomolecules could significantly improve the angiogenic and osteogenic capabilities of conventional bioceramics, and the integration of inorganic or organic functional coating in the pore wall is a highly flexible material toolbox that can be tailored directly to improve orbital bone defect repair.

Intraocular Lens with Mussel-Inspired Coating for Preventing Posterior Capsule Opacification via Photothermal Effect.

Phacoemulsification with implantation of intraocular lens (IOLs) has been widely applied as a standard treatment for cataract, which is the leading cause of vision impairment. However, it still remains a critical challenge to prevent posterior capsule opacification (PCO) in terms of postoperative visual quality. Herein, we report IOLs with mussel-inspired coatings for inhibiting lens epithelial cells and then preventing PCO through photothermal conversion effect. The mussel-inspired coatings are deposited on the nonoptical surface areas of IOLs, endowing the modified IOLs with efficient photothermal conversion property. The temperature can be facilely raised to 50-60 °C for the photothermal IOLs (PT-IOLs) by near-infrared (NIR) laser irradiation at a safe intensity of 0.3 W/cm2. These PT-IOLs display high capability of inhibiting lens epithelial cells (LECs) in vitro. Therefore, under routine NIR laser irradiation, New Zealand white rabbits implanted with the PT-IOLs demonstrate significantly lower evaluation of PCO (EPCO) scores than the control groups. The overall results indicate that our PT-IOLs provide a promising choice for the clinical prevention of PCO, thus opening a way to maintain the postoperative visual qualities for cataract patients.

Cupriferous Silver Peroxysulfite Superpyramids as a Universal and Long-Lasting Agent to Eradicate Multidrug-Resistant Bacteria and Promote Wound Healing.

Because of the emergent evolution of multidrug-resistant (MDR) bacteria, resistance to traditional antibiotics has been increasingly causing public health concerns that it can rapidly overcome the development of antibacterial agents. Here, we demonstrated a facile electrodeposition method to prepare silver peroxysulfite (Ag7O8HSO4, AOHS) superpyramids on band-aids with extraordinary antibacterial performance. The porous structure and the sharp apex of AOHS superpyramids could facilitate the release of high-valence silver ions, which possess highly efficient MDR bacteria-killing effect and keep long-term antibacterial activity (>99% killing efficiency, recycle at least 4 times) because of their superior destruction capability of the membrane of the bacteria. A layer of copper was further evaporated onto the AOHS pyramids decorated on a band-aid, which could promote wound tissue angiogenesis and prohibit bacterial infection simultaneously, and finally accelerate the healing process in MDR bacteria-infected wound in vivo. The simple and low-cost fabrication process, as well as the outstanding antibacterial performance, make AOHS pyramids have promising applications in bacterial infection and practical sterilization fields, especially toward multidrug-resistant bacteria.

Research progress on two-component signal transduction systems in Porphyromonas gingivalis.

Porphyromonas gingivalis (P. gingivalis), a Gram-negative oral anaerobe, is considered to be a major pathogenic agent involved in the onset and progression of chronic periodontitis. P. gingivalis must be able to perceive and respond to the complicated changes in host to survive the environmental challenges, in which the two-component signal transduction systems (TCSs) play critical roles by connecting input signals to cellular physiological output. Canonical TCS consists of a sensor histidine kinase and a cognate response regulator that functions via a phosphorylation cascade. In this review, the roles of TCSs in P. gingivalis were demonstrated by illustrating the target genes and modulation modes, which may help elucidate the underlying mechanisms in future studies.

Effect of surgery-first orthognathic approach on oral health-related quality of life.

OBJECTIVES: To systematically evaluate the effect of the surgery-first approach (SFA) on oral health-related quality of life (OHRQoL) in patients with dentofacial deformities. MATERIALS AND METHODS: An electronic database search and hand search of selected journals and references were carried out. Studies investigating the OHRQoL of patients receiving SFA with or without a control group were included. The risk of bias was assessed by the Cochrane risk of bias tool in randomized clinical trials (RCTs) and the Newcastle-Ottawa Scale in non-RCTs. RESULTS: A total of seven articles met the eligible criteria and were included, of which six were cohort studies and one was an RCT, and six assessed the OHRQoL of the SFA with conventional orthodontic-surgical treatment (COST) as a control and one without. A total of 214 patients were examined, with sample sizes in studies ranging from 9 to 50. A total of 3 articles successfully measured the OHRQoL both before and after treatment in both the SFA and conventional orthodontic-surgical treatment groups. A total of six cohort studies were classified as low to moderate risk of bias, and the RCT was classified as high. CONCLUSIONS: The SFA could improve the OHRQoL of patients with dentofacial deformities similar to conventional orthodontic-surgical treatment at the end of complete treatment. In addition, it increases OHRQoL immediately at the beginning of treatment without a deterioration.