High-Resolution Micro-object Separation by Rotating Magnetic Chromatography.

The development of new technologies for the separation, selection, and isolation of microparticles such as rare target cells, circulating tumor cells, cancer stem cells, and immune cells has become increasingly important in the last few years. Microparticle separation technologies are usually applied to the analysis of disease-associated cells, but these procedures often face a cell separation problem that is often insufficient for single specific cell analyses. To overcome these limitations, a highly accurate size-based microparticle separation technique, herein called "rotating magnetic chromatography", is proposed in this work. Magnetic nanoparticles, placed in a microfluidic separation channel, are forced to move in well-defined trajectories by an external magnetic field, colliding with microparticles that are in this way separated on the basis of their dimensions with high accuracy and reproducibility. The method was optimized by using fluorescein isothiocyanate-modified polystyrene particles (chosen as a reference standard) and then applied to the analysis of cancer cells like Hep-3B and SK-Hep-1, allowing their fast and high-resolution chromatographic separation as a function of their dimensions. Due to its unmatched sub-micrometer cell separation capabilities, RMC can be considered a break-through technique that can unlock new perspectives in different scientific fields, that is, in medical oncology.

Rapid detection and quantitation of ketamine and norketamine in urine and oral fluid by wooden-tip electrospray ionization mass spectrometry.

Drug analysis is an indispensable task in controlling drug abuse, which is a serious problem worldwide nowadays. In this study, we report a simple and rapid approach for detection and quantitation of drugs-of-abuse in urine and oral fluid by wooden-tip electrospray ionization mass spectrometry (WT-ESI-MS). We demonstrated that ketamine, one of the most common abused drugs, and its major metabolite, norketamine, in raw urine and oral fluid could be readily detected and quantified by WT-ESI-MS with only little sample preparation and no chromatographic separation, and the analytical performances, including the linear range, accuracy, precision, LOD and LOQ, were well acceptable for analysis of real samples.

High-activity and excellent-reusability γ-Fe2O3/SiO2 coating on TC4 titanium alloy by plasma electrolytic oxidation for enhanced photo-Fenton degradation.

The immobilized coatings as a kind of promising Fenton-like catalysts with excellent performance and reusability for the efficient degradation of antibiotics and phenol under solar light irradiation is investigated. Herein, the porous γ-Fe2O3/SiO2 immobilized ceramic coating on TC4 titanium alloy as photo-Fenton catalyst was prepared via plasma electrolytic oxidation technology. The as-obtained immobilized coating manifested a remarkable catalytic activity that the removal efficiencies of phenol and various antibiotics could reach more than 92% within 90 min, and presented excellent reusability after six runs in phenol removal. The high activity and excellent reusability of γ-Fe2O3 were attributed to the synergistic effect of multiple pathways to jointly produce abundant •OH, and the combination of γ-Fe2O3 and SiO2 in the coating could effectively reduce iron leaching during the heterogeneous photo-Fenton process, respectively. This work provides a novel strategy for the synthesis of high-performance photo-Fenton catalysts to dispose of wastewater in the future.

Electrospray ionization using wooden tips.

Electrospray ionization (ESI) is a mass spectrometric technique widely used in various fields including chemistry, biology, medicine, pharmaceutical industry, clinical assessment, and forensic science. In this study, we report a simple and economical ESI-mass spectrometry (MS) technique, which makes use of disposable wooden tips (wooden toothpicks) for loading and ionization of samples. Samples could be loaded by normal pipetting onto the tip or simply dipping the tip into sample solutions. The hydrophilic and porous nature of wood allows effective adhesion of the sample solution for durable ion signals. The tip can be directly connected to nano-ESI ion sources of various mass spectrometers. Upon application of high voltage to the tip, desirable mass spectra could be obtained. We demostrated that this new technique is applicable for analysis of various samples, including organic compounds, organometallic compounds, peptides, proteins, and samples that cannot be directly analyzed by conventional ESI techniques, e.g., slurry samples and powder samples. The slim and hard properties of the wooden tip enable sampling from specific locations such as corners and small openings, indicating potential applications of the new technique in forensic investigations. The observation of electrospray ionization from wooden materials also allows us to get new insights into the materials that can be directly ionized for mass spectrometric analysis.

A novel liquid-liquid-solid microextraction strategy for bio-sample preparation by in situ self-assembly of zeolitic imidazolate framework 8 on hollow fiber membrane.

A novel liquid-liquid-solid membrane microextraction (LLSMME) method which integrates hollow fiber liquid phase microextraction (HF-LPME) and solid phase microextraction (SPME) was developed for bio-sample preparation. The homogeneous zeolitic imidazolate framework 8 mixed matrix membrane (ZIF-8-MMM) was prepared by in situ self-assembly of ZIF-8 on the inner surface of hollow fiber membrane and employed as a flexible LLSMME device. Incorporating the advantages of both HF-LPME and SPME, the as-fabricated ZIF-8-MMM exhibited excellent performance on the extraction and preconcentration of small molecule drugs of different polarity from complex biological matrices. As a case study, ZIF-8-MMM-based LLSMME coupled with UPLC-MS/MS were developed and validated for determination of ibuprofen, simvastatin and ranitidine at trace levels in rat plasma. The method showed good linearity (r2 > 0.99) and repeatability (RSD < 15%), low limits of detection (2-3 ng mL-1) and high relative recoveries (97.42-103.8%). The enrichment factors were between 87.3 and 112.6. Our study provided a promising strategy for developing more efficient, cost-effective and environmentally friendly technique for bio-sample pretreatment.

Preparation of immobilized coating Fenton-like catalyst for high efficient degradation of phenol.

In this study, solid acid amorphous Fe3O4/SiO2 ceramic coating decorated with sulfur on Q235 carbon steel as Fenton-like catalyst for phenol degradation was successfully prepared by plasma electrolytic oxidation (PEO) in silicate electrolyte containing Na2S2O8 as sulfur source. The surface morphology and phase composition were characterized by SEM, EDS, XRD and XPS analyses. NH3-TPD was used to evaluate surface acidity of PEO coating. The results indicated that sulfur decorated amorphous Fe3O4/SiO2 ceramic coatings with porous structure and higher acid strength had the similar pore size and the surface became more and more uneven with the increase of Na2S2O8 in the silicate electrolyte. The Fenton-like catalytic activity of sulfur decorated PEO coatings was also evaluated. In contrast to negligible catalytic activity of sulfur undecorated PEO coating, catalytic activity of sulfur decorated PEO coating was excellent and PEO coating prepared with 3.0 g Na2S2O8 had the highest catalytic activity which could degrade 99% of phenol within 8 min under circumneutral pH. The outstanding performance of sulfur decorated PEO coating was attributed to strong acidic microenvironment and more Fe2+ on the surface. The strong acid sites played a key factor in determining catalytic activity of catalyst. In conclusion, rapid phenol removal under circumneutral pH and easier separation endowed it potential application in wastewater treatment. In addition, this strategy of preparing immobilized solid acid coating could provide guidance for designing Fenton-like catalyst with excellent catalytic activity and easier separation.

A high throughput mass spectrometry screening analysis based on two-dimensional carbon microfiber fractionation system.

A novel high-throughput, solvent saving and versatile integrated two-dimensional microscale carbon fiber/active carbon fiber system (2DµCFs) that allows a simply and rapid separation of compounds in low-polar, medium-polar and high-polar fractions, has been coupled with ambient ionization-mass spectrometry (ESI-Q-TOF-MS and ESI-QqQ-MS) for screening and quantitative analyses of real samples. 2DµCFs led to a substantial interference reduction and minimization of ionization suppression effects, thus increasing the sensitivity and the screening capabilities of the subsequent MS analysis. The method has been applied to the analysis of Schisandra Chinensis extracts, obtaining with a single injection a simultaneous determination of 33 compounds presenting different polarities, such as organic acids, lignans, and flavonoids in less than 7min, at low pressures and using small solvent amounts. The method was also validated using 10 model compounds, giving limit of detections (LODs) ranging from 0.3 to 30ngmL-1, satisfactory recoveries (from 75.8 to 93.2%) and reproducibilities (relative standard deviations, RSDs, from 1.40 to 8.06%).

A Fe3O4/FeAl2O4 composite coating via plasma electrolytic oxidation on Q235 carbon steel for Fenton-like degradation of phenol.

The Fe3O4/FeAl2O4 composite coatings were successfully fabricated on Q235 carbon steel by plasma electrolytic oxidation technique and used to degrade phenol by Fenton-like system. XRD, SEM, and XPS indicated that Fe3O4 and FeAl2O4 composite coating had a hierarchical porous structure. The effects of various parameters such as pH, phenol concentration, and H2O2 dosage on catalytic activity were investigated. The results indicated that with increasing of pH and phenol content, the phenol degradation efficiency was reduced significantly. However, the degradation rate was improved with the addition of H2O2, but dropped with further increasing of H2O2. Moreover, 100 % removal efficiency with 35 mg/L phenol was obtained within 60 min at 303 K and pH 4.0 with 6.0 mmol/L H2O2 on 6-cm(2) iron oxide coating. The degradation process consisted of induction period and rapid degradation period; both of them followed pseudo-first-order reaction. Hydroxyl radicals were the mainly oxidizing species during phenol degradation by using n-butanol as hydroxyl radical scavenger. Based on Fe leaching and the reaction kinetics, a possible phenol degradation mechanism was proposed. The catalyst exhibited excellent stability.

Microporous Ni-doped TiO2 film photocatalyst by plasma electrolytic oxidation.

Ni-doped TiO2 film catalysts were prepared by a plasma electrolytic oxidation (PEO) method and were mainly characterized by means of SEM, EDS, XRD, XPS, and DRS, respectively. The effects of Ni doping on the structure, composition and optical absorption property of the film catalysts were investigated along with their inherent relationships. The results show that the film catalyst is composed of anatase and rutile TiO2 with microporous structure. Doping Ni changes the phase composition and the lattice parameters (interplanar crystal spacing and cell volume) of the films. The optical absorption range of TiO2 film gradually expands and shifts to the red with increasing dosages. Both direct and indirect transition band gaps of the TiO2 films are deduced consequently. Moreover, the photocatalytic activity of the film catalysts for splitting Na2S+Na2SO3 solution into H2 is enhanced by doping with an appropriate amount of Ni. The as-prepared TiO2 film catalyst doping with 10 g/L of Ni(Ac)2 presents the highest photocatalytic reducing activity.