Distribution and influencing factors of pulp stones based on CBCT: a retrospective observational study from southwest China.

BACKGROUND: Pulp stones are a type of pulp calcification, the presence of which tends to hinder endodontic treatment. Thus, this retrospective study aimed to analyze the distribution of pulp stones in the population in southwest China and identify the influencing factors. MATERIALS: Cone-beam computed tomography (CBCT) scans of 5066 teeth of 200 patients (91 males and 109 females) aged 16-45 years were evaluated. Pulp stones were marked as either present or absent when distinct radiopaque masses were found in the pulp cavity, then evaluated the occurrence of pulp stones with regard to tooth type, sex, age group, and contact it with tooth status. The Pearson chi-square test and nonparametric test were used for statistical analysis. RESULTS: Pulp stones were detected in 49.0% of patients and 7.4% of teeth, respectively. The incidence in females was 1.9 times higher than in males (OR = 1.9, 95% CI = 1.1-3.3, p = 0.001). Pulp stones were most prevalent in patients 36-45 years of age. Furthermore, in the age range of 16-45 years, the likelihood of finding pulp stones increased 1.1 times per year with age (OR = 1.1, 95% CI = 1.0-1.1, p = 0.032). A higher incidence of pulp stones was observed in the maxilla and molars. Of the 5066 teeth studied, pulp stones were more common in non-intact teeth. CONCLUSION: Nearly half of the population in southwest China had pulp stones. Pulp stones were found significantly more often in females, maxilla, and non-intact teeth, and their frequency increased with age. For dentists, understanding the distribution of pulp stones is crucial for the proper design of root canal treatment (RCT). TRIAL REGISTRATION: This study was approved by the Ethics Committee of the Affiliated Hospital of Stomatology, Southwest Medical University (certificate number: 20220818001).

Porphyromonas gingivalis promotes progression of esophageal squamous cell cancer via TGFß-dependent Smad/YAP/TAZ signaling.

Microbial dysbiosis in the upper digestive tract is linked to an increased risk of esophageal squamous cell carcinoma (ESCC). Overabundance of Porphyromonas gingivalis is associated with shorter survival of ESCC patients. We investigated the molecular mechanisms driving aggressive progression of ESCC by P. gingivalis. Intracellular invasion of P. gingivalis potentiated proliferation, migration, invasion, and metastasis abilities of ESCC cells via transforming growth factor-ß (TGFß)-dependent Drosophila mothers against decapentaplegic homologs (Smads)/Yes-associated protein (YAP)/Transcriptional coactivator with PDZ-binding motif (TAZ) activation. Smads/YAP/TAZ/TEA domain transcription factor1 (TEAD1) complex formation was essential to initiate downstream target gene expression, inducing an epithelial-mesenchymal transition (EMT) and stemness features. Furthermore, P. gingivalis augmented secretion and bioactivity of TGFß through glycoprotein A repetitions predominant (GARP) up-regulation. Accordingly, disruption of either the GARP/TGFß axis or its activated Smads/YAP/TAZ complex abrogated the tumor-promoting role of P. gingivalis. P. gingivalis signature genes based on its activated effector molecules can efficiently distinguish ESCC patients into low- and high-risk groups. Targeting P. gingivalis or its activated effectors may provide novel insights into clinical management of ESCC.

High-Content Screening Discovers Microplastics Released by Contact Lenses under Sunlight.

The widespread use of plastic products leads to the ubiquity of microplastics in daily life, while the release of microplastics from long-used contact lenses has not been reported due to the limitations of conventional detection methods. Here, we established a new and rapid method to capture and count microplastics by using a high-content screening system. This method can simultaneously measure the diameter, area, and shape of each plastic particle, and the reliability and applicability of this method were verified with commercial microplastics. It is estimated that 90,698 particles of microplastics could be released from a pair of contact lenses during a year of wearing. The microplastics in the leachates were confirmed to be released from the contact lenses by scanning electron microscopy and Fourier transform infrared spectroscopy fingerprint analysis. Our study reveals an undiscovered pathway of microplastic direct exposure to humans, highlighting the urgent need to assess the potential health risks caused by eye exposure to microplastics.

A facile strategy to construct biocompatible poly(vinyl alcohol)-based self-healing hydrogels.

Endowing polymer hydrogels with good self-healing ability can autonomously repair damage with improved reliability. In this work, the benzaldehyde group was first grafted onto a biocompatible poly(vinyl alcohol) (PVA) molecular chain by esterification to obtain aldehyde-functionalized PVA (APVA), and the reversible imine bonds were further formed by reacting with amine groups on a quaternized chitosan (HTCC) chain. And thus, the self-healing APVA/HTCC hydrogel was fabricated with such imine bonds as crosslinking points together with hydrogen bonds. Many more imine bonds of hydrogels formed with increasing aldehyde content, resulting in increasing crosslinking density, decreasing average pore diameter and formation of a compact dynamic network, imparting certain mechanical strength and toughness with hydrogels. Furthermore, the healing efficiency of the hydrogel reached as high as 91.7% by self-healing without any external stimulus and its microstructure could be reconstructed after damage, exhibiting rapid recovery and dynamic features. Biocompatible self-healing PVA-based hydrogels exhibited great potential application in biomedical fields, like smart infill biomaterials, tissue engineering scaffolds, etc.

Hydrogel Dressing Containing Basic Fibroblast Growth Factor Accelerating Chronic Wound Healing in Aged Mouse Model.

Due to the decreasing self-repairing ability, elder people are easier to form chronic wounds and suffer from slow and difficult wound healing. It is desirable to develop a novel wound dressing that can accelerate chronic wound healing in elderly subjects to decrease the pain of patients and save medical resources. In this work, Heparin and basic fibroblast growth factor(bFGF) were dissolved in the mixing solution of 4-arm acrylated polyethylene glycol and dithiothreitol to form hydrogel dressing in vitro at room temperature without any catalysts, which is convenient and easy to handle in clinic application. In vitro re-lease test shows the bFGF could be continuously released for at least 7 days, whereas the dressing surface integrity maintained for 3 days degradation in PBS solution. Three groups of treatments including bFGF-Gel, bFGF-Sol and control without any treatment were applied on the full-thickness wound on the 22 months old mice back. The wound closure rate and histological and immunohistochemical staining all illustrated that bFGF-Gel displayed a better wound healing effect than the other two groups. Thus, as-prepared hydrogel dressing seems supe-rior to current clinical treatment and more effective in elderly subjects, which shows promising potential to be applied in the clinic.

Biocompatibility evaluation of heparin-conjugated poly(ε-caprolactone) scaffolds in a rat subcutaneous implantation model.

Vascular grafts prepared from synthetic polymers have serious shortcomings that can be resolved by surface modification, such as by immobilizing heparin. In this study, the mechanical properties, biocompatibility, anticoagulation property, and water contact angle of two heparin-conjugated poly(ε-caprolactone) scaffolds (PCL-hexamethylendiamine-heparin, PCL-HMD-H. PCL-lysine-heparin, PCL-LYS-H) were compared to identify a preferred heparin conjugation method. An evaluation of the subcutaneous tissue biocompatibility of the scaffolds demonstrated that PCL-HMD-H had better endothelial cell proliferation than the PCL-LYS-H and was therefore a promising scaffold candidate for use in vascular tissue-engineering.

Vascular Remodeling Process of Heparin-Conjugated Poly(ε-Caprolactone) Scaffold in a Rat Abdominal Aorta Replacement Model.

In the field of vascular graft research, poly-ε-caprolactone (PCL) is used owing to its good mechanical strength and biocompatibility. In this study, PCL scaffold was prepared by electrospinning and surface modification with heparin via hexamethylenediamine. Then the scaffolds were implanted into the infrarenal abdominal aorta of Wistar rats and contrast-enhanced micro-ultrasound was used to monitor the patency of grafts after implantation. These grafts were extracted from the rats at 1, 3, and 6 months for histological analysis, immunofluorescence staining, and scanning electron microscopy observation. Although some grafts experienced aneurysmal change, results showed that all implanted grafts were patent during the course of 6 months and these grafts demonstrated well-organized neotissue with endothelium formation, smooth muscle regeneration, and extracellular matrix formation. Such findings confirm feasibility to create heparin-conjugated scaffolds of next-generation vascular grafts.

Synthesis and swelling property of superabsorbent starch grafted with acrylic acid/2-acrylamido-2-methyl-1-propanesulfonic acid.

BACKGROUND: In order to develop starch-based superabsorbent polymers (SAPs) with high water absorbency, both acrylic acid (AA) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) were graft copolymerized onto cassava starch, and St-g-AA-AMPS SAP was successfully synthesized. The effect of AA/AMPS molar ratio on the structure and swelling property of SAP was investigated. RESULTS: Introduction of AMPS units improved the storage modulus and crosslinking density of St-g-AA-AMPS SAP, and was beneficial in forming a perfect network structure. With increasing AMPS content, the equilibrium swelling ratio and swelling rate constant (k) of the SAP first increased and then decreased, and the maximum swelling ratio reached 1200.0 and 90.0 g/g in distilled water and brine respectively, resulting from the high ionization constant and hydrophilic ability of AMPS, and improved tolerance to brine. By introducing AMPS units, the re-swelling capability of SAP was improved, and more hydrogen bonds could form between molecules of water and SAP, leading to an increase in non-freezing bound water and freezing bound water, and the water retention of SAP was enhanced. CONCLUSION: Introduction of AMPS units improved the water absorption capacity, swelling rate, and water retention ability of St-g-AA-AMPS SAP, presenting wide application potential in agriculture and horticulture of desert regions. © 2017 Society of Chemical Industry.

Preparation and experimental research into retrievable rapamycin- and heparin-coated vena cava filters: a pilot study.

The use of retrievable vena cava filters (RVCFs) was once commonplace, but filter retrieval was often very difficult. Most unsuccessful retrieval was due to intimal hyperplasia of the inferior vena cava and in-filter thrombosis. This pilot study aimed to design a drug-eluting RVCF. The hypothesis was that coated drugs could be released continuously to inhibit vena intimal hyperplasia and thrombosis, and thus improve the retrieval rates of RVCFs. Various concentrations of polycaprolactone (PCL)/chloroform solution were made from a mixture of Rapamycin and Heparin according to the quality of PCL. The drug was coated onto the surface of the filters by a process of dipping. In vitro tests were performed to check stability and in vitro drug release. Animals receiving filter implantation were divided into 4 groups, the experimental intervention group (EI), experimental laparotomy group (EL), control intervention group (CI), and control laparotomy group (CL). Filters were retrieved by laparotomy in the EL and CL groups, and by interventional operation in the EI and CI groups at 10, 20 and 30 days after implantation. Pathological endothelia biopsies were performed with wood grain-eosin (HE) staining and immunohistochemical examination, with the proliferating cell nuclear antigen (PCNA) index, and the results were compared between the experimental and control groups. The weight of thrombus within the filters was also measured by scale and compared. The coating concentration that succeeded in completely covering the surface was 0.2 g/ml. There was better coverage by SEM at this concentration, and the coated drugs had no obvious loss after filter release. The drug release curves showed that the amount of Heparin released was more than 50 % at day 1; Rapamycin released little in the first few days, beginning in earnest at 20 to 30 days. The filters were easy to retrieve at 10 days for both groups, while neither could be retrieved at 30 days. However, at 20 days the filter in the EI group could be retrieved with some difficulty, but the filter in the CI group couldn't be removed at all. The pathological examination and immunohistochemical PCNA examination results showed that the use of drug-eluting filters could effectively inhibit endothelial hyperplasia at 10 and 20 days, but was less effective at 30 days. There was no apparent difference in the total weight of blood clots between the experimental and control groups. We successfully conducted a pilot study into preparing Rapamycin- and Heparin-coated RVCFs. In vitro and in vivo tests further proved the possibility of improving the retrieval rates of RVCFs by effectively inhibiting vein endothelial proliferation, but the anticoagulation and antithrombosis effects of Heparin were unsatisfactory.

Supercritical CO2 Foaming of Radiation Cross-Linked Isotactic Polypropylene in the Presence of TAIC.

Since the maximum foaming temperature window is only about 4 °C for supercritical CO2 (scCO2) foaming of pristine polypropylene, it is important to raise the melt strength of polypropylene in order to more easily achieve scCO2 foaming. In this work, radiation cross-linked isotactic polypropylene, assisted by the addition of a polyfunctional monomer (triallylisocyanurate, TAIC), was employed in the scCO2 foaming process in order to understand the benefits of radiation cross-linking. Due to significantly enhanced melt strength and the decreased degree of crystallinity caused by cross-linking, the scCO2 foaming behavior of polypropylene was dramatically changed. The cell size distribution, cell diameter, cell density, volume expansion ratio, and foaming rate of radiation-cross-linked polypropylene under different foaming conditions were analyzed and compared. It was found that radiation cross-linking favors the foamability and formation of well-defined cell structures. The optimal absorbed dose with the addition of 2 wt % TAIC was 30 kGy. Additionally, the foaming temperature window was expanded to about 8 °C, making the handling of scCO2 foaming of isotactic polypropylene much easier.

Biomechanical effects of cement distribution in the fractured area on osteoporotic vertebral compression fractures: a three-dimensional finite element analysis.

BACKGROUND: According to some clinical studies, insufficient cement distribution (ID) in the fractured area and asymmetrical cement distribution around the fractured area were thought to be the reasons for unrelieved pain and recollapse after percutaneous vertebral augmentation (PVA) in the treatment of symptomatic osteoporotic vertebral compression fractures. METHODS: Finite element methods were used to investigate the biomechanical variance among three patterns of cement distribution (ID and sufficient cement distribution in the fractured area and asymmetrical cement distribution around the fractured area including upward [BU] and downward [BD] cement distribution). RESULTS: Compared with fractured vertebra before PVA, distribution of von Mises stress in the cancellous bone was transferred to be concentrated at the cancellous bone surrounding cement after PVA, whereas it was not changed in the cortical bone. Compared with sufficient cement distribution group, maximum von Mises stress in the cancellous bone and cortical bone and maximum displacement of augmented vertebra increased significantly in the ID group, whereas asymmetrical cement distribution around the fractured area in BU and BD groups mainly increased maximum von Mises stress in the cancellous bone significantly. Similar results could be seen in all loading conditions. CONCLUSIONS: ID in the fractured area may lead to unrelieved pain after PVA in the treatment of symptomatic osteoporotic vertebral compression fractures as maximum displacement of augmented vertebral body increased significantly. Both ID in the fractured area and asymmetrical cement distribution around the fractured area are more likely to induce recollapse of augmented vertebra because they increased maximum von Mises stress in the cancellous bone and cortical bone of augmented vertebra significantly.

Experimental study on the construction of small three-dimensional tissue engineered grafts of electrospun poly-ε-caprolactone.

Studies on three-dimensional tissue engineered graft (3DTEG) have attracted great interest among researchers as they present a means to meet the pressing clinical demand for tissue engineering scaffolds. To explore the feasibility of 3DTEG, high porosity poly-ε-caprolactone (PCL) was obtained via the co-electrospinning of polyethylene glycol and PCL, and used to construct small-diameter poly-ε-caprolactone-lysine (PCL-LYS-H) scaffolds, whereby heparin was anchored to the scaffold surface by lysine groups. A variety of small-diameter 3DTEG models were constructed with different PCL layers and the mechanical properties of the resulting constructs were evaluated in order to select the best model for 3DTEGs. Bone marrow mononuclear cells were induced and differentiated to endothelial cells (ECs) and smooth muscle cells (SMCs). A 3DTEG (labeled '10-4%') was successfully produced by the dynamic co-culture of ECs on the PCL-LYS-H scaffolds and SMCs on PCL. The fluorescently labeled cells on the 3DTEG were subsequently observed by laser confocal microscopy, which showed that the ECs and SMCs were embedded in the 3DTEG. Nitric oxide and endothelial nitric oxide synthase assays showed that the ECs behaved normally in the 3DTEG. This study consequently provides a new thread to produce small-diameter tissue engineered grafts, with excellent mechanical properties, that are perfusable to vasculature and functional cells.

The in vivo characterization of electrospun heparin-bonded polycaprolactone in small-diameter vascular reconstruction.

OBJECTIVE: To evaluate the possibility of using heparin-bonded polycaprolactone grafts to replace small-diameter arteries. METHODS: Polycaprolactone was bonded with heparin. The activated partial thromboplastin time of heparin-bonded polycaprolactone grafts was determined in vitro. Small-diameter grafts were electrospun with heparin-bonded polycaprolactone and polycaprolactone and were implanted in dogs to substitute part of the femoral artery. Angiography was used to investigate the patency and aneurysm of the grafts after transplantation. After angiography, the patent grafts were explanted for histology analysis. The degradation of the grafts and the collagen content of the grafts were measured. RESULTS: Activated partial thromboplastin time tests in vitro showed that heparin-bonded polycaprolactone grafts exhibit obvious anticoagulation. Arteriography showed that two heparin-bonded polycaprolactone and three polycaprolactone grafts were obstructed. Other grafts were patent, without aneurysm formation. Histological analysis showed that the tested grafts degraded evidently over the implantation time and that the luminal surface of the tested grafts had become covered by endothelial cells. Collagen deposition in heparin-bonded polycaprolactone increased with time. There were no calcifications in the grafts. Gel permeation chromatography showed the heparin-bonded polycaprolactone explants at 12 weeks lose about 32% for Mw and 24% for Mn. The collagen content on the heparin-bonded polycaprolactone grafts increased over time. CONCLUSION: This preliminary study demonstrates that heparin-bonded polycaprolactone is a suitable graft for small artery reconstruction. However, heparin-bonded polycaprolactone degrades more rapidly than polycaprolactone in vivo.

Surface coordination polymerization of ethylene by hydrozirconation-immobilized metallocene.

Hydrozirconation on vinyl-terminated substrates (silicon wafer and nanosilica sphere) is employed as an efficient way for immobilization of zirconocene catalyst through Zr-C bonds, which is applied in surface coordination ethylene polymerization producing surface-tethered polyethylene (PE). The formation of Zr-C σ bond induced by hydrozirconation provides an initiator precursor for growing a layer of PE covalently linked onto substrates. The results from SEM, AFM, and TEM show that the surface polymerization is controlled by hydrozirconation. Surface pattern or core-shell structure with crystalline PE coating can be formed, when silicon wafer is selectively functionalized with vinyl-groups or vinyl-modified nanosilica is applied. It is believed that hydrozirconation for the synthesis of zirconocene initiator can be a versatile route to prepare polyolefin hybrid materials.

Self-adhesive wearable poly (vinyl alcohol)-based hybrid biofuel cell powered by human bio-fluids.

Advancement of wearable microelectronics demands their power source with continuous energy supply, skin-integration and miniaturization. In light of poly (vinyl alcohol) (PVA) hydrogel with nontoxicity, good biocompatibility and low cost, an advanced wearable PVA-based hybrid biofuel cells (HBFCs) with high self-adhesiveness was developed. Through the reaction between PVA molecules and succinic anhydride (SAA), the carboxylated PVA (PVA/SAA) was obtained, and by incorporation with PDA as crosslinker, the self-adhesive PVA/SAA-DA hydrogel electrolytes formed by dual covalent and hydrogen bonding. With increasing SAA and PDA content, the pore size decreased, and a uniform and dense network formed, endowing the hydrogel with a relatively high absorption capacity of PBS solution of lactate as cell fuel. Meanwhile the various functional groups of hydrogel, including catechol, quinone, amino and hydroxyl groups, contributed to impressive tissue adhesion strength against pigskin under dry and wet conditions. The PVA/SAA-DA hydrogel displayed high conductive property, and the integrated PVA-based HBFC generated open circuit voltage of 0.50 V and maximum power density of 128.76 µW/cm2 in 20 mM lactate solution, which was optimized to be 0.57 V/224.85 µW/cm2 when the pore size was enlarged. The power retention reached above 70% in one week, showing long-term stability of HBFC. The PVA-based HBFC was further adhered to human skin without extra adhesive tapes to scavenge human sweat as biofuel, and the maximum power density reached 85.34 µW/cm2, while by connected with a DC-DC converter, the HBFC could power watch, exhibiting promising application potentials as wearable electronic device to provide bioelectricity.

[Percutaneous pedicle screw anchored vertebral augmentation for the treatment of Kümmell disease without neurological symptoms].

OBJECTIVE: To explore the clinical effect of percutaneous pedicle screw anchored vertebral augmentation(PPSAVA) in the treatment of asymptomatic Kümmell disease without neurological symptoms. METHODS: The clinical data of 20 patients with Kümmell disease without neurological symptoms treated with PPSAVA in our hospital from January 2019 to December 2021 were analyzed retrospectively, including 5 males and 15 females, aged 56 to 88 (74.95±9.93) years old. and the course of disease was 7 to 60 days with an average of (21.35±14.46) days. All patients were treated with PPSAVA. The time of operation, the amount of bone cement injected and the leakage of bone cement were recorded. The visual analogue scale(VAS), Oswestry disability index(ODI), vertebral body angle(VBA), anterior edge height and midline height of vertebral body were compared among the before operation, 3 days after operation and during the final follow-up. The loosening and displacement of bone cement were observed during the final follow-up. RESULTS: All the 20 patients completed the operation successfully. The operation time was 30 to 56 min with an average of (41.15±7.65) min, and the amount of bone cement injection was 6.0 to 12.0 ml with an average of (9.30±1.49) ml. Bone cement leakage occurred in 6 cases and there were no obvious clinical symptoms. The follow-up time was 6 to 12 months with an average of (8.43±2.82) months. The VBA, anterior edge height and midline height of of injured vertebral body were significantly improved 3 days after operation and the final follow-up(P<0.05), and the VBA, anterior edge height and midline height of of injured vertebral body were lost in different degrees at the final follow-up (P<0.05). The VAS and ODI at 3 days after operation and at the final follow-up were significantly lower than those at preoperatively(P<0.05), but the VAS score and ODI at the final follow-up were not significantly different from those at 3 d after operation(P>0.05). At the last follow-up, no patients showed loosening or displacement of bone cement. CONCLUSION: PPSAVA is highly effective in treating Kümmell disease without neurological symptoms, improving patients' pain and functional impairment, and reducing the risk of cement loosening and displacement postoperatively.

Progress and trends in photodynamic therapy research in oral science: A bibliometric analysis.

BACKGROUND: Photodynamic therapy is garnering increasing attention in oral science. Despite its promising potential, further exploration is warranted to delve into the research paradigms and evolving trends within oral science. Therefore, this study aimed to conduct a comprehensive bibliometric analysis of photodynamic therapy in oral science (PDTOS), investigating research landscapes, identifying key contributors, analyzing collaborative networks, pinpointing emerging research directions, and exploring factors influencing high citations. METHODS: Research and review articles in PDTOS were retrieved from the Web of Science Core Collection database up to December 31, 2023. The R package "bibliometrix" and VOSviewer were utilized for visualizing collaboration networks and keyword co-occurrence, alongside trend analysis. Negative binomial regression was used to model factors affecting citation counts. RESULTS: A total of 2784 articles with significant international collaboration (23.14 %) were analyzed. Brazil, China, the USA, Iran, and Italy led in publications, with predominant USA-European collaborations. The University of Sao Paulo in Brazil was the most published institution in the field. Photodiagnosis and Photodynamic Therapy was the core journal in the field and has the highest number of publications. The main research fields included photodynamic therapy, antibacterial and anticancer treatment, management, and peri­implant periodontitis, with a recent focus on peri­implantitis. Factors such as international cooperation, funding, article age, type, author count, and references significantly influenced citations. CONCLUSIONS: This research provided valuable insights into PDTOS trends and knowledge structures. These findings underscored a significant increase in the number of PDTOS publications, urging strengthened international cooperation. Emerging research has focused on peri­implantitis and nano-photosensitizer materials. Authors should consider various citation-related factors in their research endeavors.

Hydrogel coating containing heparin and cyclodextrin/paclitaxel inclusion complex for retrievable vena cava filter towards high biocompatibility and easy removal.

Aiming to improve the retrieval rate of retrievable vena cava filters (RVCF) and extend its dwelling time in vivo, a novel hydrogel coating loaded with 10 mg/mL heparin and 30 mg/mL cyclodextrin/paclitaxel (PTX) inclusion complex (IC) was prepared. The drug-release behavior in the phosphate buffer solution demonstrated both heparin and PTX could be sustainably released over approximately two weeks. Furthermore, it was shown that the hydrogel-coated RVCF (HRVCF) with 10 mg/mL heparin and 30 mg/mL PTX IC effectively extended the blood clotting time to above the detection limit and inhibited EA.hy926 and CCC-SMC-1 cells' proliferation in vitro compared to the commercially available bare RVCF. Both the HRVCF and the bare RVCF were implanted into the vena cava of sheep and retrieved at at 2nd and 4th week after implantation, revealing that the HRVCF had a significantly higher retrieval rate of 67 % than the bare RVCF (0 %) at 4th week. Comprehensive analyses, including histological, immunohistological, and immunofluorescent assessments of the explanted veins demonstrated the HRVCF exhibited anti-hyperplasia and anticoagulation properties in vivo, attributable to the hydrogel coating, thereby improving the retrieval rate in sheep. Consequently, the as-prepared HRVCF shows promising potential for clinical application to enhance the retrieval rates of RVCFs.

Long-term observation of polycaprolactone small-diameter vascular grafts with thickened outer layer and heparinized inner layer in rabbit carotid arteries.

In our previous study, the pristine bilayer small-diameterin situtissue engineered vascular grafts (pTEVGs) were electrospun from a heparinized polycaprolactone (PCL45k) as an inner layer and a non-heparinized PCL80k as an outer layer in the thickness of about 131 µm and 202 µm, respectively. However, the hydrophilic enhancement of inner layer stemmed from the heparinization accelerated the degradation of grafts leading to the early formation of arterial aneurysms in a period of 3 months, severely hindering the perennial observation of the neo-tissue regeneration, host cell infiltration and graft remodeling in those implanted pTEVGs. Herein to address this drawback, the thickness of the outer layers was increased with PCL80k to around 268 µm, while the inner layer remained unchangeable. The thickened TEVGs named as tTEVGs were evaluated in six rabbits via a carotid artery interpositional model for a period of 9 months. All the animals kept alive and the grafts remained patent until explantation except for one whose one side of arterial blood vessels was occluded after an aneurysm occurred at 6 months. Although a significant degradation was observed in the implanted grafts at 9 month, the occurrence of aneurysms was obviously delayed compared to pTEVGs. The tissue stainings indicated that the endothelial cell remodeling was substantially completed by 3 months, while the regeneration of elastin and collagen remained smaller and unevenly distributed in comparison to autologous vessels. Additionally, the proliferation of macrophages and smooth muscle cells reached the maximum by 3 months. These tTEVGs possessing a heparinized inner layer and a thickened outer layer exhibited good patency and significantly delayed onset time of aneurysms.

Dynamic RGD ligands derived from highly mobile cyclodextrins regulate spreading and proliferation of endothelial cells to promote vasculogenesis.

A thiolated RGD was incorporated into the threaded allyl-ß-cyclodextrins (Allyl-ß-CDs) of the polyrotaxane (PR) through a thiol-ene click reaction, resulting in the formation of dynamic RGD ligands on the PR surface (dRGD-PR). When maintaining consistent RGD density and other physical properties, endothelial cells (ECs) cultured on dRGD-PR exhibited significantly increased cell proliferation and a larger cell spreading area compared to those on the non-dynamic RGD (nRGD-PCL). Furthermore, ECs on dRGD-PR demonstrated elevated expression levels of FAK, p-FAK, and p-AKT, along with a larger population of cells in the G2/M stage during cell cycle analysis, in contrast to cells on nRGD-PCL. These findings suggest that the movement of the RGD ligands may exert additional beneficial effects in promoting EC spreading and proliferation, beyond their essential adhesion and proliferation-promoting capabilities, possibly mediated by the RGD-integrin-FAK-AKT pathway. Moreover, in vitro vasculogenesis tests were conducted using two methods, revealing that ECs cultured on dRGD-PR exhibited much better vasculogenesis than nRGD-PCL in vitro. In vivo testing further demonstrated an increased presence of CD31-positive tissues on dRGD-PR. In conclusion, the enhanced EC spreading and proliferation resulting from the dynamic RGD ligands may contribute to improved in vitro vasculogenesis and in vivo vascularization.