Biological synthesis of metallic nanoparticles (MNPs) by plants and microbes: their cellular uptake, biocompatibility, and biomedical applications.

Metallic nanoparticles (MNPs) with their diverse physical and chemical properties have been applied in various biomedical domains. The increasing demand for MNPs has attracted researchers to develop straightforward, inexpensive, simple, and eco-friendly processes for the enhanced production of MNPs. To discover new biomedical applications first requires knowledge of the interactions of MNPs with target cells. This review focuses on plant and microbial synthesis of biological MNPs, their cellular uptake, biocompatibility, any biological consequences such as cytotoxicity, and biomedical applications. We highlighted the involvement of biomolecules in capping and stabilization of MNPs and the effect of physicochemical parameters particularly the pH on the synthesis of MNPs. Recently achieved milestones to understand the role of synthetic biology (SynBiol) in the synthesis of tailored MNPs are also discussed.

Autonomously Self-Adhesive Hydrogels as Building Blocks for Additive Manufacturing.

We report a simple method of preparing autonomous and rapid self-adhesive hydrogels and their use as building blocks for additive manufacturing of functional tissue scaffolds. Dynamic cross-linking between 2-aminophenylboronic acid-functionalized hyaluronic acid and poly(vinyl alcohol) yields hydrogels that recover their mechanical integrity within 1 min after cutting or shear under both neutral and acidic pH conditions. Incorporation of this hydrogel in an interpenetrating calcium-alginate network results in an interfacially stiffer but still rapidly self-adhesive hydrogel that can be assembled into hollow perfusion channels by simple contact additive manufacturing within minutes. Such channels withstand fluid perfusion while retaining their dimensions and support endothelial cell growth and proliferation, providing a simple and modular route to produce customized cell scaffolds.

HAp/Ti2Ni coatings of high bonding strength on Ti-6Al-4V prepared by the eutectic melting bonding method.

Eutectic melting bonding (EMB) method is a useful technique for fabricating bioactive coatings with relatively high crystallinity and bonding strength with substrate on titanium substrates. Using the EMB method, hydroxyapatite/Ti2Ni coatings were prepared on the surface of Ti-6Al-4V at a relatively low temperature (1,050 °C) in a vacuum furnace. The coatings were then characterized in terms of phase components, microstructure, bonding strength and cytotoxicity. The results showed that the coatings were mainly composed of HAp and Ti2Ni, and the thickness of the coatings was approximately 300 µm. X-ray diffraction analysis showed that the coatings exhibited relatively high crystallinity. The tensile bonding strength between the coatings and the substrates was 69.68±5.15 MPa. The coatings had a porous and rough surface which is suitable for cell attachment and filopodia growth. The cell culture study showed that the number of MG-63 cells increased, and the cell morphology changed with the incubation time. This study showed that the EMB method can be utilized as a potentially powerful method to obtain high quality hydroxyapatite coatings with desired mechanical and biocompatibility properties on Ti-alloy substrates.

A quality comparison of protein crystals grown under containerless conditions generated by diamagnetic levitation, silicone oil and agarose gel.

High-quality crystals are key to obtaining accurate three-dimensional structures of proteins using X-ray diffraction techniques. However, obtaining such protein crystals is often a challenge. Several containerless crystallization techniques have been reported to have the ability to improve crystal quality, but it is unknown which is the most favourable way to grow high-quality protein crystals. In this paper, a quality comparison of protein crystals which were grown under three containerless conditions provided by diamagnetic levitation, silicone oil and agarose gel was conducted. A control experiment on a vessel wall was also simultaneously carried out. Seven different proteins were crystallized under the four conditions, and the crystal quality was assessed in terms of the resolution limit, the mosaicity and the Rmerge. It was found that the crystals grown under the three containerless conditions demonstrated better morphology than those of the control. X-ray diffraction data indicated that the quality of the crystals grown under the three containerless conditions was better than that of the control. Of the three containerless crystallization techniques, the diamagnetic levitation technique exhibited the best performance in enhancing crystal quality. This paper is to our knowledge the first report of improvement of crystal quality using a diamagnetic levitation technique. Crystals obtained from agarose gel demonstrated the second best improvement in crystal quality. The study indicated that the diamagnetic levitation technique is indeed a favourable method for growing high-quality protein crystals, and its utilization is thus potentially useful in practical efforts to obtain well diffracting protein crystals.

Andrias Davidianus Mucus-Based Bioadhesive with Enhanced Adhesion and Wound Healing Properties.

The skin secretion of Andrias davidianus (SSAD) is a novel biological adhesive raw material under development. This material exhibits robust adhesion while maintaining the flexibility of the wound. It also has the potential for large-scale production, making it promising for practical application explore. Hence, in-depth research on methods to fine-tune SSAD properties is of great importance to promote its practical applications. Herein, we aim to enhance the adhesive and healing properties of SSAD by incorporating functional components. To achieve this goal, we selected 3,4-dihydroxy-l-phenylalanine and vaccarin as the functional components and mixed them with SSAD, resulting in a new bioadhesive, namely, a formulation termed "enhanced SSAD" (ESSAD). We found that the ESSAD exhibited superior adhesive properties, and its adhesive strength was improved compared with the SSAD. Moreover, ESSAD demonstrated a remarkable ability to promote wound healing. This study presents an SSAD-based bioadhesive formulation with enhanced properties, affirming the feasibility of developing SSAD-based adhesive materials with excellent performance and providing new evidence for the application of SSAD. This study also aims to show that SSAD can be mixed with other substances, and addition of effective components to SSAD can be studied to further adjust or improve its performance.

A Versatile Hydrophilic and Antifouling Coating Based on Dopamine Modified Four-Arm Polyethylene Glycol by One-Step Synthesis Method.

A versatile hydrophilic and antifouling coating was designed and prepared based on catechol-modified four-arm polyethylene glycol. The dopamine (DA) molecules were grafted onto the end of the four-arm polyethylene glycol carboxyl (4A-PEG-COOH) through the amidation reaction, which was proven by 1H NMR and FTIR analysis, assisting the strong adhesion of PEG on the surface of various types of materials, including metallic, inorganic, and polymeric materials. The reduction of the water contact angle and the bacteria-repellent and protein-repellent effects indicated that the coating had good hydrophilicity and antifouling performance. Raman spectroscopy analysis demonstrated the affinity between the polymeric surface and water, which further confirmed the hydrophilicity of the coating. Finally, in vitro cytotoxicity assay demonstrated good biocompatibility of the coating layer.

Polyvinylamine with moderate binding affinity as a highly effective vehicle for RNA delivery.

Polymeric carriers for RNA therapy offer potential advantages in terms of low immunogenicity, promoting modifiability and accelerating intracellular transport. However, balancing high transfection efficacy with low toxicity remains challenging with polymer-based vehicles; indeed, polyethyleneimine (PEI) remains the "gold standard" polymer for this purpose despite its significant toxicity limitations. Herein, we demonstrate the potential of polyvinylamine (PVAm), a commodity high-charge cationic polymer used in the papermaking industry and has similar structure with PEI, as an alternative carrier for RNA delivery. High levels of transfection of normal, tumor, and stem cells with a variety of RNA cargoes including small interfering RNA (siRNA), microRNA (miRNA), and recombinant RNA can be achieved in vitro under the proper complex conditions. While, both the anti-tumor effect achieved in a xenograft osteosarcoma model and lipid-lowering activity observed in a hyperlipidemia mice indicate the potential for highly effective in vivo activity. Of note, both the transfection efficiency and the cytotoxicity of PVAm compare more favorably with those of PEI, with PVAm offering the additional advantages of simpler purification and significantly lower cost. In addition, the mechanism for the difference in transfection efficiency between PVAm and PEI is explored by molecular docking as well as analyzing the process of association and dissociation between polymers (PVAm and PEI) and nucleic acids. Our research provides a novel, non-toxic, and cost-effective carrier candidate for next generation RNA therapy, and elucidates the potential mechanism of PVAm for its efficient delivery of RNA.

A study of degradation behaviour and biocompatibility of Zn-Fe alloy prepared by electrodeposition.

Zinc is a biodegradable metal, which exhibits more moderate biodegradability than magnesium and iron, so that it has great application potential in the field of biomedical materials. Alloying of zinc and iron may lead to producing a new type of implant material Zn-Fe alloy, which might be able to meet the requirements for a moderate degradation rate. However, due to the huge difference in the melting point between zinc and iron, the preparation of Zn-Fe alloy is quite challenging and hence rarely reported. In this study, we show that Zn-Fe alloys can be successfully prepared by electrodeposition technology. The microstructures, composition, degradation properties and biocompatibility of the Zn-Fe alloys were systematically studied. The results showed that the content of iron in the alloys ranged from 0 to 8 wt%, depending on the concentration of Fe ions and the current density. In the alloys, the major's phases were η, δ and Г1, and they were mainly affected by the ion concentration in the electrolyte. In the in vitro immersion tests, the Zn-Fe alloy ZF2-1 showed the highest immersion corrosion rate, while ZF3-1 showed the highest electrochemical corrosion rate. Moreover, we found that the corrosion rates of the alloys were significantly higher than that of the pure Fe. In the in vivo experiments, we confirmed that the Zn-Fe alloy possessed good biocompatibility. These results demonstrate that the electrodeposition technology is a good method to prepare Zn-Fe alloys, and the Zn-Fe alloys prepared by this method are potentially promising materials for biomedical applications.

A novel layer-structured scaffold with large pore sizes suitable for 3D cell culture prepared by near-field electrospinning.

Electrospinning is a powerful method for preparing porous materials that can be applied as biomedical materials for implantation or tissue engineering or as scaffolds for 3D cell culture experiments. However, this technique is limited in practical applications because the pore size of 3D scaffolds directly prepared by conventional electrospinning is usually less than several tens of micrometres, which may not be suitable for 3D cell culture and tissue growth. To allow for satisfactory 3D cell culture and tissue engineering, the pore size of the scaffold should be controllable according to the requirement of the specific cells to be cultured. Here, we show that layer-structured scaffolds with pore sizes larger than 100µm can be obtained by stacking meshes prepared by direct-writing using the near-field electrospinning (NFES) technique. In the study, we prepared composite scaffolds made of polycaprolactone (PCL) and hydroxyapatite (HAp) via the above-mentioned method and tested the effectiveness of the novel scaffold in cell culture using mouse pre-osteoblast cells (MC3T3-E1). The pore size and the degradability of the PCL/HAp scaffolds were characterized. The results showed that the average pore size of the scaffolds was 167µm, which was controllable based on the required application; the degradation rate was controllable depending on the ratio of PCL to HAp. The biocompatibility of the scaffolds in vitro was studied, and it was found that the scaffolds showed no toxicity and that the cells could effectively attach, proliferate, and differentiate in the 3D skeleton of the scaffolds. Our studies showed that a simple modification of the preparation procedure can lead to a new way to fabricate novel layer-structured 3D scaffolds with controllable structures and pore sizes suitable for practical applications in implantation, tissue engineering and 3D cell culture.

A novel porous Fe/Fe-W alloy scaffold with a double-layer structured skeleton: Preparation, in vitro degradability and biocompatibility.

A novel porous Fe/Fe-W alloy scaffold with a double-layer structured skeleton was prepared for the first time by electrodeposition. The microstructure of the scaffold was analysed by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and mercury porosimetry. Mechanical property, in vitro degradability and biocompatibility were tested by tensile test, immersion and a cytotoxicity test. The results showed that the scaffolds exhibited a cellular structure that is similar to that of cancellous bone and had a considerably large specific surface area. The skeleton of the scaffolds showed a double-layer structure that was composed of a hollow Fe skeleton wrapped in a thin layer of Fe-W alloy. The tensile strength and the apparent density are close to that of cancellous bone. It was also found that the different surface microstructures showed different effects on in vitro degradability and biocompatibility. In the immersion test, the corrosion rate decreased gradually as the immersion time increased. In the cytotoxicity test, the extraction medium of the pure Fe scaffold showed the lowest cell viability, followed by that of 1.5FeW as a close second. The extraction media of FeW, Fe1.5W and Fe2W were similar, and their cell viability was far above that of the Fe and 1.5FeW scaffolds. The structural style of the scaffolds presented in this paper is potentially useful and applicable to developing degradable scaffolds with a tailored corrosion rate.