Polyurethane foam induces epigenetic modification of mitochondrial DNA during different metamorphic stages of Tenebrio molitor.

The present work investigated the changes in DNA methylation pattern of Tenebrio molitor mitochondria genome at different development stages, which was fed with polyurethane foam as a sole diet. Polyurethane foam could influence the global methylation levels in mitochondria DNA of Tenebrio molitor. Different leves of 5-methylcytosine appeared at CpG and non-CpG sites of Tenebrio molitor mtDNA while they were fed with polyurethane foam: 10 CpG and 49 non-CpG sites at larval stage, 4 CpG and 31 non-CpG sites at pupa stage, 7 CpG and 56 non-CpG sites at adult stage in general. Moreover, we observed the decreased levels of ATP generation with the mitochondria DNA methylation variation. The results demonstrated that mitochondria DNA gene could be methylated in response to environmental pollutants to modulate stage-specific functions. Moreover, mtDNA methylation of polyurethane-foam-feeding Tenebrio molitor existed discrepancy in the developmental stage. The tentative methylation mechanism of mtDNA might be that polyurethane foam induced oxidative stress and increased the permeability of mitochondrial membranes, which resulted in transmethylase entry into mitochondria.

Using Mendelian randomization provides genetic insights into potential targets for sepsis treatment.

Sepsis is recognized as a major contributor to the global disease burden, but there is a lack of specific and effective therapeutic agents. Utilizing Mendelian randomization (MR) methods alongside evidence of causal genetics presents a chance to discover novel targets for therapeutic intervention. MR approach was employed to investigate potential drug targets for sepsis. Pooled statistics from IEU-B-4980 comprising 11,643 cases and 474,841 controls were initially utilized, and the findings were subsequently replicated in the IEU-B-69 (10,154 cases and 454,764 controls). Causal associations were then validated through colocalization. Furthermore, a range of sensitivity analyses, including MR-Egger intercept tests and Cochran's Q tests, were conducted to evaluate the outcomes of the MR analyses. Three drug targets (PSMA4, IFNAR2, and LY9) exhibited noteworthy MR outcomes in two separate datasets. Notably, PSMA4 demonstrated not only an elevated susceptibility to sepsis (OR 1.32, 95% CI 1.20-1.45, p = 1.66E-08) but also exhibited a robust colocalization with sepsis (PPH4 = 0.74). According to the present MR analysis, PSMA4 emerges as a highly encouraging pharmaceutical target for addressing sepsis. Suppression of PSMA4 could potentially decrease the likelihood of sepsis.

Transport of functional group modified polystyrene nanoplastics in binary metal oxide saturated porous media.

Metal oxides exist in porous media in the form of composite metal oxides, which can significantly affect the transport and transformation of pollutants in the soil environment. In this study, binary metal oxide porous media were prepared to explore the effects of solution chemistry, and the presence of binary metal oxides on the transport of functional group modified polystyrene nanoplastics (PSNPs) in saturated porous media. The results show that the existence of binary metal oxides significantly affects the migration ability of PSNPs in saturated porous media. The increase of ionic strength and the presence of multivalent cations affect the transport capacity of PSNPs in porous media. The types of binary metal oxides affect the migration of PSNPs in saturated porous media. The surface roughness and electrostatic interaction are important factors affecting the retention of PSNPs on the surface of binary metal oxide saturated porous media. The surface morphology has a more far-reaching impact. In addition, DLVO theory cannot fully explain the interaction between PSNPs and saturated porous media in the presence of Al3+. This study's results help provide some theoretical support for the migration of microplastics in the soil environment.

Modified ß-cyclodextrin microspheres towards the application in intumescent fire resistance and smoke-suppressing of bio-based poly(L-lactic acid).

In this work, the ß-cyclodextrin (ß-CD) was modified by a phosphazene compound to prepare a novel amorphous derivate (ß-CDCP), which was combined with the ammonium polyphosphate (APP) as a synergistic flame retardant (FR) of the bio-based poly(L-lactic acid) (PLA). The effects of the APP/ß-CDCP on the thermal stability, combustion behavior, pyrolysis process, fire resistance performance and crystallizability of the PLA were investigated comprehensively and in depth by thermogravimetric (TG) analysis, limited oxygen index (LOI) analysis, UL-94 test, cone calorimetry measurement, TG-infrared (TG-IR), scanning electron microscopy-energy dispersive spectrometer, Raman spectroscopy, pyrolysis-gas chromatography/mass spectrometry and differential scanning calorimetry. The PLA/5%APP/10%ß-CDCP showed a highest LOI of 33.2 %, passed V-0 rating and exhibited self-extinguish phenomenon in the UL-94 test. Also, it presented a lowest peak of heat release rate, total heat release, peak of smoke production rate and total smoke release, and a highest char yield treated by cone calorimetry analysis. In addition, the 5%APP/10%ß-CDCP shortened significantly crystallization time and enhanced crystallization rate of the PLA. Gas phase and intumescent condensed phase fire proofing mechanisms are proposed to elucidate enhanced fire resistance in this system in detail.

Effects of physicochemical factors on the transport of aged polystyrene nanoparticles in saturated porous media.

Plastic debris, particularly nanoplastics, have attracted substantial attention as an emerging pollutant of global concern. The aging process caused by UV could dramatically alter the physicochemical properties of polystyrene plastics and affect their fate and transport in the subsurface environment. We researched the effects of diverse factors, including flow rate, ionic strength (IS), and cation valence on the transport of aged polystyrene nanoparticles (PSNPs) in saturated porous media and found that their mobility was greatly enhanced by the aging process at all other experimental conditions except coexistence with Al3+. Interestingly, we found that the aged PSNPs were polymerized due to the coexistence with Al3+, which led the aged PSNPs to exhibit weaker mobility than the pristine. Zeta potential and particle size measurements, FTIR spectroscopy, and XPS were employed to characterize the PSNPs, and the results suggest that UV radiation provides O-containing functional groups for the PSNPs. The experimental results correspond well with the ADR model and the values of Smax and k closely reflect the deposition of the PSNPs in sand columns. Moreover, the Derjaguin-Landau-Verwey-Overbeek (DLVO) theoretical calculation accurately reflects the interaction of the pristine and aged PSNPs and quartz sand. Overall, due to the processes that PSNPs possibly undergo in the environment, their mobility may fluctuate dramatically. These findings help remedy knowledge deficiency regarding nanoplastic mobility being affected by aging processes, further underscore the critical influence of the aging process on the potential risks and environmental fates of nanoplastics.

[Recent advances and perspective in the study of the molecular imprinting of proteins].

Molecular imprinting technique (MIT) involves the synthesis of polymer in the presence of a template to produce complementary binding sites in terms of its size, shape, and functional group orientation. Such kind of polymer possesses specific recognition ability towards its template molecule. Despite the rapid development of MIT over the years, the majority of the template molecules that have been studied are small molecules, while molecular imprinting of proteins remains a significant yet challenging task due to their large size, structural flexibility and complex conformation. In this review, we summarize the research findings over the past five years, and discuss the characteristics of the technique, the most recent progress and the perspective in the field of molecular imprinting of proteins.

High-throughput fabrication of silk fibroin/hydroxypropyl methylcellulose (SF/HPMC) nanofibrous scaffolds for skin tissue engineering.

Silk fibroin (SF) is a natural macromolecule material with good biocompatibility, which can be used to prepare a variety of biological materials. In this study, hydroxypropyl methylcellulose (HPMC) was applied to improve the properties of SF nanofibrous scaffolds (NFS) for skin tissue engineering applications. SF/HPMC NFS with varying weight ratios of SF: HPMC were prepared in batches by a modified free surface electrospinning. The effects of the varying weight ratio of SF: HPMC on the morphology, property and yield of SF/HPMC NFS were investigated. The results revealed that with the increase of HPMC contents, the hydrophilicity of SF/HPMC NFS would be improved, but the yield of that would decrease. Considering its effects on the morphology, property and yield of SF/HPMC NFS, the optimal weight ratio of SF: HPMC was 7:1. And SF/HPMC NFS with the weight ratio of 7:1 (SF/HPMC-7:1 NFS) had good mechanical property, hydrophilicity, porosity, swelling property and water vapor transmission rate (WVTR). In addition, the viability test results of human umbilical vein endothelial cells demonstrated that SF/HPMC-7:1 NFS maintained excellent biocompatibility for cell adhesion and proliferation.

Multidifferentiation potential of dental-derived stem cells.

Tooth-related diseases and tooth loss are widespread and are a major public health issue. The loss of teeth can affect chewing, speech, appearance and even psychology. Therefore, the science of tooth regeneration has emerged, and attention has focused on tooth regeneration based on the principles of tooth development and stem cells combined with tissue engineering technology. As undifferentiated stem cells in normal tooth tissues, dental mesenchymal stem cells (DMSCs), which are a desirable source of autologous stem cells, play a significant role in tooth regeneration. Researchers hope to reconstruct the complete tooth tissues with normal functions and vascularization by utilizing the odontogenic differentiation potential of DMSCs. Moreover, DMSCs also have the ability to differentiate towards cells of other tissue types due to their multipotency. This review focuses on the multipotential capacity of DMSCs to differentiate into various tissues, such as bone, cartilage, tendon, vessels, neural tissues, muscle-like tissues, hepatic-like tissues, eye tissues and glands and the influence of various regulatory factors, such as non-coding RNAs, signaling pathways, inflammation, aging and exosomes, on the odontogenic/osteogenic differentiation of DMSCs in tooth regeneration. The application of DMSCs in regenerative medicine and tissue engineering will be improved if the differentiation characteristics of DMSCs can be fully utilized, and the factors that regulate their differentiation can be well controlled.

A biocompatible chitosan composite containing phosphotungstic acid modified single-walled carbon nanotubes.

Surface modification of carbon nanotubes is crucial for the dispersion and interfacial adhesion of carbon nanotubes in polymer composites. Here we present a novel method to construct single-walled carbon nanotube/chitosan composites using phosphotungstic acid as an anchor reagent to modify single-walled carbon nanotubes. The most direct benefit from this method is that this modification is mild but effective: the induced defects on single-walled carbon nanotubes are negligible based on Raman and transmission electron microscopy observations; and homogeneous dispersion of single-walled carbon nanotubes in chitosan matrices and strong binding between single-walled carbon nanotubes and chitosan are achieved. Moreover, according to the results of tetrazolium-based colorimetric assays in vitro, we demonstrate that the produced phosphotungstic-acid-modified single-walled carbon nanotube/chitosan composites have good biocompatibility. Thus, our study provides a feasible route to fabricate biocompatible composites containing single-walled carbon nanotubes for potential application in bone tissue engineering.

[Studies on separation and purification of phenylethanoid glycosides from leaves of Forsythia suspensa by macroporous adsorption resin].

OBJECTIVE: To study the technology for separation and purification of phenylethanoid glycosides from leaves of Forsythia suspensa by macroporous adsorption resin. METHODS: The absorption and separation abilities of 10 kinds of adsorption resin were studied and the separation and purification technological process of phenylethanoid glycosides from leaves of Forsythia suspensa was investigated by HPLC with the content of Forsythoside A as an index. RESULTS: The optimal conditions were as follows: taking AB-8 resin column as adsorbent, the resin was washed by 20BV distilled water to remove impurity and 8BV 30% ethanol to elute phenylethanoid glycosides, the eluting velocity was 2BV/h, the content of Forsythoside A in the extract was 34.8%. CONCLUSION: The process with AB-8 resin is an effective method to separate and purify phenylethanoid glycosides.

Batch preparation of electrospun polycaprolactone/chitosan/aloe vera blended nanofiber membranes for novel wound dressing.

At present, more and more attention has been paid to the development of active wound dressings. Chitosan, a kind of carbohydrate polymer with good biocompatibility, is widely used in the field of wound dressings. In this study, a slopeing free surface electrospinning (SFSE) device was presented to prepare large quantities of polycaprolactone/chitosan/aloe vera (PCL/CS/AV) nanofiber membranes (NFMs) for antibacterial wound dressing. And the morphologies of PCL/CS/AV NFMs with varying weight ratios of PCL:CS:AV were studied using SEM, and the optimal weight ratio of 5:3:2 was determined for better wound dressings. Then the structure, wetting property and yield of the PCL/CS/AV NFMs with the optimal weight ratio were investigated, and the effects of the addition of AV on the antibacterial performance and the biocompatibility of NFMs was studied. In addition, the preparation mechanism of SFSE was researched by simulating the electric field distribution using Maxwell 3D due to the important role of the electric field in the SFSE process. The simulation analyses of electric fields agreed with the experimental data. The results illustrated SFSE could prepare high quality PCL/CS/AV NFMs in batches, and its yield of PCL/CS/AV NFMs was 10 times more than the single-needle ES, and the fabricated NFMs showed excellent antibacterial performance and biocompatibility, which made them suitable for wound dressings.

Supernucleation, crystalline structure and thermal stability of bacterially synthesized poly(3-hydroxybutyrate) polyester tailored by thymine as a biocompatible nucleating agent.

Naturally occurring thymine (TM) was incorporated into bacterial poly(3-hydroxybutyrate) (PHB) polyester to fabricate a novel and green biocomposite. Both 0.5% and 1% TM exhibit supernucleation effect on PHB, and crystallization kinetics suggests TM significantly increased Tc and Xc, and substantially shortened t1/2 of PHB. Epitaxial nucleation caused by a perfect crystal lattice matching between PHB and TM, was proposed to elucidate nucleation mechanism of PHB. Hydrogen bond interaction exists between CO, C-O-C groups of PHB and -CH3 (or -CH)/-NH- group of TM. TM interacted with CO group of PHB crystalline phase rather than that of amorphous one. In addition, two new IR crystalline bands assigned to C-O-C group of PHB appeared in the presence of TM, which arises from shift of two amorphous ones, respectively. TM enhanced onset thermal degradation temperature of PHB, mainly attributed to increased degree of crystallinity of PHB and flame retardance effect of TM.

Genetic susceptibility of common polymorphisms in NIN and SIGLEC5 to chronic periodontitis.

Chronic periodontitis (CP) is a common oral disease characterized by the slow progression of alveolar attachment loss and bone destruction. Genetic components have been reported to play an important role in the onset and development of CP. In the present study, we aimed to replicate the association signals of NIN and SIGLEC5 identified in previous genome-wide association studies (GWASs) of samples from Chinese Han individuals. Association signals between clinical severity indicators of CP and relevant single nucleotide polymorphisms (SNPs) were also examined. A total of 3,160 study subjects, including 1,076 CP patients and 2,084 healthy controls, were recruited. A total of 32 SNPs, including 22 from NIN and 10 from SIGLEC5, were selected for genotyping. SNPs rs12883458 (OR = 1.45, P = 1.22 × 10-5, NIN) and rs4284742 (OR = 0.75, P = 1.69 × 10-5, SIGLEC5) were significantly associated with CP disease status. rs4284742 was significantly associated with all 3 clinical severity indicators, including bleeding on probing (BOP), probing depth (PD) and clinical attachment loss (CAL). According to evidence from bioinformatics analyses, both significant SNPs, rs12883458 and rs4284742, are likely surrogates of underlying variants with true effects. In summary, our findings provide direct evidence for the association of NIN and SIGLEC5 with CP susceptibility.

Coupling of Spinosad Fermentation and Separation Process via Two-Step Macroporous Resin Adsorption Method.

In this paper, a two-step resin adsorption technology was investigated for spinosad production and separation as follows: the first step resin addition into the fermentor at early cultivation period to decrease the timely product concentration in the broth; the second step of resin addition was used after fermentation to adsorb and extract the spinosad. Based on this, a two-step macroporous resin adsorption-membrane separation process for spinosad fermentation, separation, and purification was established. Spinosad concentration in 5-L fermentor increased by 14.45 % after adding 50 g/L macroporous at the beginning of fermentation. The established two-step macroporous resin adsorption-membrane separation process got the 95.43 % purity and 87 % yield for spinosad, which were both higher than that of the conventional crystallization of spinosad from aqueous phase that were 93.23 and 79.15 % separately. The two-step macroporous resin adsorption method has not only carried out the coupling of spinosad fermentation and separation but also increased spinosad productivity. In addition, the two-step macroporous resin adsorption-membrane separation process performs better in spinosad yield and purity.

[Simulation research on the movement and deposition of inhalational particles in the human respiratory tract].

An entire 3-dimensional geometry model from mouth, pharynx, larynx, trachea to triple bifurcation and the mathematics models for the calculation of the fluid flow and inhalational particle movement in the respiratory tract were proposed in this paper. The deposition fraction of inhalational particles in the respiratory tract obtained from the numerical simulation was coincident with the experimental data basically. Particles were traced in the Lagrangian frame, and at the same time, particle deposition fraction and position were recorded based on the models. The movement and deposition of the inhalational particles in the upper respiratory tract were analyzed. The results show that the deposition of inhalational particles in different positions have important correlation with the breathing intensity, particle density and particle diameter; deposition fraction of the inhalational particles in the trachea will increase at high breathing intensity and decrease with particle diameter increased; the deposition fraction of the inhalational particles in the larynx is maximal and can attain 35%, but the influence of the breathing intensity and particle diameter on the deposition fraction is smaller relatively; the deposition fraction of the inhalational particles in the triple bifurcation will decrease observably with particle diameter increased; the deposition fraction of the inhalational particles in the triple bifurcation is higher obviously at medium and small breathing intensity compared with that of high breathing intensity. The simulation results of this paper can provide a foundation for the research of the effect of inhalational particles on the human health and the research of the inhaling remedy in medicine.