Osmoelectric siphon models for signal and water dispersal in wounded plants.

When attacked by herbivores, plants produce electrical signals which can activate the synthesis of the defense mediator jasmonate. These wound-induced membrane potential changes can occur in response to elicitors that are released from damaged plant cells. We list plant-derived elicitors of membrane depolarization. These compounds include the amino acid l-glutamate (Glu), a potential ligand for GLUTAMATE RECEPTOR-LIKE (GLR) proteins that play roles in herbivore-activated electrical signaling. How are membrane depolarization elicitors dispersed in wounded plants? In analogy with widespread turgor-driven cell and organ movements, we propose osmoelectric siphon mechanisms for elicitor transport. These mechanisms are based on membrane depolarization leading to cell water shedding into the apoplast followed by membrane repolarization and water uptake. We discuss two related mechanisms likely to occur in response to small wounds and large wounds that trigger leaf-to-leaf electrical signal propagation. To reduce jasmonate pathway activation, a feeding insect must cut through tissues cleanly. If their mandibles become worn, the herbivore is converted into a robust plant defense activator. Our models may therefore help to explain why numerous plants produce abrasives which can blunt herbivore mouthparts. Finally, if verified, the models we propose may be generalizable for cell to cell transport of water and pathogen-derived regulators.

The acceleration on decolorization of azo dyes by magnetic lignin-based materials via enhancing the extracellular electron transfer.

Two novel and eco-friendly redox mediators (RMs), magnetic oxidative vanillin (MOV) and magnetic oxidative syringaldehyde (MOS), both derived from lignin, were prepared to improve the decolorization of the methyl orange (MO) dye. The Decolorization Efficiency (DE) of MO in the batch experiments with MOV and MOS were increased by more than 60% and 22%, respectively, when compared to the control experiment without magnetic RMs. Moreover, the two magnetic RMs could maintain stable DE of MO in sequenced batch reactors (SBRs), and negligible leaching of the oxidized lignin monomers was observed under various environmental conditions. Density Function Theory (DFT) calculations were used to propose three potential biodegradation mechanisms for azo dyes, and the key intermediates were confirmed using high-performance liquid chromatography. This study proposed a feasible strategy for functional utilization of lignin resource, as well as a practical method for effectively treating azo dye-containing wastewater.

Outcomes of Treatment With Manipulative Reduction Combine With the Disc-condyle Repositioning Splint in Acute Anterior Disc Displacement Without Reduction.

ABSTRACT: In this report, the authors describe a case of the acute anterior disc displacement without reduction treated by manipulative reduction combined with the disc-condyle repositioning splint to improve the limited mouth opening and relieve the pain, including diagnostic images and treatment performed.

Clinical Effects of the Combination of Rhytidectomy and Temporomandibular Joint Disc Repositioning Surgery.

OBJECTIVE: This study aims to investigate the clinical effects of the combination of rhytidectomy and temporomandibular joint (TMJ) disc repositioning surgery in internal derangement (ID) stage IV-V and facial aging patients. METHODS: Eighteen facial aging with bilateral ID IV-V patients were enrolled in this study. All of them had undergone temporomandibular disc repositioning surgery and rhytidectomy by the same surgeon (Yao Min Zhu). Pre-/post-surgical clinical manifestations, facial photography, radiographic data were recorded and analyzed, as well as doctor, patient, third-party evaluation of postsurgical facial appearance satisfaction. RESULTS: The average age of 18 female patients was 52.9. The average of presurgical visual analog pain scale score was 5.94, ranged from 4 to 8. After 6 months, the average of postsurgical visual analog pain scale score was 0.28, ranged from 0 to 1 ( P   >  0.05). The average maximal mouth opening of presurgical and postsurgical was 2.19 and 3.29 cm, ranged from 1.2 to 2.8 cm and 3.0 to 3.5 cm, respectively ( P  < 0.05). Postoperative magnetic resonance imaging showed the location of the bilateral TMJ discs directly above the mandibular condyle. The satisfaction rate of doctors, patients and third-party with facial appearance was 95% to 98%, 96% to 99% and 96% to 99%, respectively, with an average of 95.72%, 98.11%, and 97.50%. CONCLUSIONS: For patients with bilateral ID IV-V and facial aging, the combination of disc repositioning surgery and rhytidectomy is a very feasible procedure to treat TMJ disorders and improve patients' facial appearance and satisfaction.

Supramolecular Deconstruction of Bamboo Holocellulose via Hydrothermal Treatment for Highly Efficient Enzymatic Conversion at Low Enzyme Dosage.

Hydrothermal pretreatment (HTP) has long been considered as an efficient and green treatment process on lignocellulosic biomass for bioconversion. However, the variations of cellulose supramolecular structures during HTP as well as their effects on subsequent enzymatic conversion are less understood. In this work, bamboo holocellulose with well-connected cellulose and hemicelluloses polysaccharides were hydrothermally treated under various temperatures. Chemical, morphological, and crystal structural determinations were performed systematically by a series of advanced characterizations. Xylan was degraded to xylooligosaccharides in the hydrolyzates accompanied by the reduced degree of polymerization for cellulose. Cellulose crystallites were found to swell anisotropically, despite the limited decrystallization by HTP. Hydrogen bond linkages between cellulose molecular chains were weakened due to above chemical and crystal variations, which therefore swelled, loosened, and separated the condensed cellulose microfibrils. Samples after HTP present notably increased surface area, favoring the adsorption and subsequent hydrolysis by cellulase enzymes. A satisfying enzymatic conversion yield (>85%) at rather low cellulase enzyme dosage (10 FPU/g glucan) was obtained, which would indicate new understandings on the green and efficient bioconversion process on lignocellulosic biomass.

Zika Virus Infection in Tupaia belangeri Causes Dermatological Manifestations and Confers Protection against Secondary Infection.

Animal models of Zika virus (ZIKV) infection have recently been established in mice, guinea pigs, and nonhuman primates. Tree shrews (Tupaia belangeri) are an emerging experimental animal in biomedical applications, but their susceptibility to ZIKV infection has not been explored. In the present study, we show that subcutaneous inoculation of ZIKV led to rapid viremia and viral secretion in saliva, as well as to typical dermatological manifestations characterized by massive diffuse skin rash on the trunk. Global transcriptomic sequencing of peripheral blood mononuclear cells isolated from ZIKV-infected animals revealed systematic gene expression changes related to the inflammatory response and dermatological manifestations. Importantly, ZIKV infection readily triggered the production of high-titer neutralizing antibodies, thus preventing secondary homologous infection in tree shrews. However, neonatal tree shrews succumbed to ZIKV challenge upon intracerebral infection. The tree shrew model described here recapitulates the most common dermatological manifestations observed in ZIKV-infected patients and may greatly facilitate the elucidation of ZIKV pathogenesis and the development of novel vaccines and therapeutics.IMPORTANCE The reemergence of Zika virus (ZIKV) has caused a global public health crisis since 2016, and there are currently no vaccines or antiviral drugs to prevent or treat ZIKV infection. However, considerable advances have been made in understanding the biology and pathogenesis of ZIKV infection. In particular, various animal models have been successfully established to mimic ZIKV infection and its associated neurological diseases and to evaluate potential countermeasures. However, the clinical symptoms in these mouse and nonhuman primate models are different from the common clinical manifestations seen in human ZIKV patients; in particular, dermatological manifestations are rarely recapitulated in these animal models. Here, we developed a new animal model of ZIKV infection in tree shrews, a rat-sized, primate-related mammal. In vitro and in vivo characterization of ZIKV infection in tree shrews established a direct link between ZIKV infection and the immune responses and dermatological manifestations. The tree shrew model described here, as well as other available animal models, provides a valuable platform to study ZIKV pathogenesis and to evaluate vaccines and therapeutics.

Promoting enzymatic saccharification of organosolv-pretreated poplar sawdust by saponin-rich tea seed waste.

Organosolv pretreatment with two ethanol concentrations (25% and 50%, v/v) was performed to improve enzymatic saccharification of poplar sawdust. It was found that lower ethanol concentration (25%, v/v) pretreatment resulted in a higher enzymatic digestibility of poplar (38.1%) due to its higher xylan removal and similar lignin removal ratios, compared to that pretreated with 50% (v/v) ethanol pretreatment (27.5%). However, the residual lignin still exhibited a strong inhibition on enzymatic hydrolysis of organosolv-pretreated poplar (OP). Bio-surfactant preparations including tea saponin (TS), TS crude extract, and tea seed waste were applied in enzymatic hydrolysis of OP, due to their potential ability of reducing enzyme non-productive binding on lignin. Their optimal loadings in enzymatic hydrolysis of OP were optimized, which indicated that adding 0.075 g/g glucan of TS improved the 72-h glucose yield of OP by 48.3%. Moreover, adding TS crude extract and tea seed waste exhibited the better performance than TS for improving enzymatic hydrolysis of OP. It was verified that the presence of protein in TS crude extract and tea seed waste accounted for the higher improvement. More importantly, the directly application of tea seed waste in enzymatic hydrolysis could achieve the similar improvement on enzymatic hydrolysis of OP, where chemosynthetic surfactant (PEG6000) was added. The residual enzyme activities in supernatant of enzymatic hydrolysis were also determined to reveal the changes on enzyme adsorption after adding surfactants. Generally, tea seed waste could be directly applied as an alternative to chemosynthetic surfactants to promote enzymatic hydrolysis of lignocelluloses.

The application of polypropylene mesh for testicular prosthesis in surgical castration for patients with prostate cancer.

BACKGROUND: To explore whether a polypropylene mesh is suitable for application as a new material for testicular prostheses. METHODS: The data of 65 patients with advanced prostate cancer who underwent surgical castration in hospital were collected and analyzed. Patients who preferred to undergo traditional orchidectomy (n = 16) were assigned to the control group, and patients who underwent subcapsular orchiectomy plus implantation of a polypropylene mesh testicular prosthesis (n = 49) were assigned to the experimental group. The presence of hematoma, infection, and other complications in patients in these two groups were investigated at 3 and 12 months following the surgery. The patients were also followed up using a self-designed testicular castration satisfaction questionnaire. RESULTS: A higher score indicated greater satisfaction. The mean score was 15.33 ± 2.85 in the experimental group and 4.63 ± 1.45 in the control group at 3 months after the surgery. The mean score was 14.92 ± 1.74 in the experimental group and 4.25 ± 1.61 in the control group at 12 months after the surgery. The difference between the two groups was statistically significant at the two time points (P < 0.01). CONCLUSIONS: Compared with orchidectomy alone, patients were more satisfied with subcapsular orchiectomy plus the implantation of a polypropylene mesh testicular prosthesis for the treatment of advanced prostate cancer. Furthermore, the polypropylene mesh testicular prosthesis maintained its original character over the duration of the study, with a good long-term effect. Thus, implantation of a polypropylene mesh testicular prosthesis is indicated to be safe and effective, and polypropylene mesh is potentially useful as a new material for testicular prostheses.

[Polypropylene mesh for testicular prothesis implantation: A report of 57 cases].

OBJECTIVE: To search for an optimum method for testicular prothesis implantation in the treatment of testis loss. METHODS: We retrospectively analyzed the surgical methods and outcomes of 53 cases of terminal prostate cancer and 4 cases of unilateral testicular torsion treated by implantation of testicular prothesis with the polypropylene mesh. RESULTS: The 57 male patients all received testicular prothesis with the polypropylene mesh. All the patients were satisfied with the appearance and size of the scrotum after surgery. No scrotal hematoma, prosthesis infection, or autoimmune disease occurred postoperatively. CONCLUSION: Testis loss is not a rare condition clinically, for the treatment of which surgical implantation of testicular prothesis with the polypropylene mesh can achieve both a fine tissue compatibility and a desirable scrotal appearance.

Cause analysis of the effects of acid-catalyzed steam-exploded corn stover prehydrolyzate on ethanol fermentation by Pichia stipitis CBS 5776.

The prehydrolyzate obtained from acid-catalyzed steam-exploded corn stover (ASC) mainly contains xylose and a number of inhibitory compounds that inhibit ethanol fermentation by Pichia stipitis. In this study, the effects of the ASC prehydrolyzate, specifically those of the carbohydrate-degradation products, lignin-degradation products (which were extracted from ASC prehydrolyzate using ethyl acetate), and six major phenolic compounds (added to pure-sugar media individually or in combination), on ethanol fermentation were investigated. Results indicate that the effects of the carbohydrate-degradation products were negligible (10 h delayed) compared with those of pure-sugar fermentation, whereas the effects of the lignin-degradation products were significant (52 h delayed). Meanwhile, the inhibitory effects of the major phenolic compounds were not caused by certain types of inhibitors, but were due to the synergistic effects of various inhibitors.

Application of temporarily functional antibiotic-containing bone cement prosthesis in revision hip arthroplasty.

PURPOSE: To investigate the clinical outcome of two-stage revision total hip arthroplasty for infected hip arthroplasty using antibiotic-impregnated cement prosthesis. MATERIALS AND METHODS: Forty-one patients, who suffered from an infection after hip replacement or internal fixation of femoral neck and trochanteric fractures, were treated with a two-stage revision hip arthroplasty and followed up for an average of 37 months. All the patients were implanted with antibiotic-impregnated cement prosthesis as one-stage treatment and were then managed with two-stage revision hip arthroplasty after 12-24 weeks. During the follow-up, Merle d'Aubigné hip score and Harris score were employed for assessment of hip function, and infection recurrence was observed. RESULTS: According to Merle d'Aubigné hip score, 16 patients (39.2 %) were excellent, 19 (46.3 %) were good, 6 (14.6 %) were moderate, and no bad result and the average score was 15.42. Mean Harris score of preoperation, interval period, and postoperation was 46.7, 66.5, and 92.3, respectively. There was no infection recurrence. CONCLUSION: Two-stage revision total hip arthroplasty for infected hip arthroplasty using antibiotic-impregnated cement prosthesis has a satisfying clinical outcome.

Tween 80 reversed adverse effects of combined autohydrolysis and p-toluenesulfonic acid pretreatment on enzymatic hydrolysis of poplar.

In this study, a combined pretreatment involving autohydrolysis and p-toluenesulfonic acid (p-TsOH) was performed on poplar to coproduce xylooligosaccharides (XOSs) and monosaccharides. The autohydrolysis (180 °C, 30 min) yielded 53.2 % XOS and enhanced the delignification efficiency in the subsequent p-TsOH treatment. Furthermore, considerably high glucan contents (64.1 %∼83.1 %) were achieved in the combined pretreated substrates. However, their enzymatic digestibilities were found to be extremely poor (9.6 %∼14.2 %), which were even lower than the single p-TsOH pretreated substrates (10.2 %∼35.8 %). The underlying reasons were revealed by systematically investigating the effects of the single and combined pretreatment strategies on substrate properties. Moreover, the Tween 80 addition successfully reversed the adverse effects of combined pretreatment on the enzymatic hydrolysis, achieving a high glucose yield of 99.3 % at an enzyme loading of 10 filter paper units/g (FPU/g) glucan. These results deepen the understanding of the synergy of combined pretreatment on biomass fractionation and enzymatic saccharification.

Research trends of bio-application of major components in lignocellulosic biomass (cellulose, hemicellulose and lignin) in orthopedics fields based on the bibliometric analysis: A review.

Cellulose, hemicellulose, and lignin are the major bio-components in lignocellulosic biomass (BC-LB), which possess excellent biomechanical properties and biocompatibility to satisfy the demands of orthopedic applications. To understand the basis and trends in the development of major bio-components in BC-LB in orthopedics, the bibliometric technology was applied to get unique insights based on the published papers (741) in the Web of Science (WOS) database from January 1st, 2001, to February 14th, 2023. The analysis includes the annual distributions of publications, keywords co-linearity, research hotspots exploration, author collaboration networks, published journals, and clustering of co-cited literature. The results reveal a steady growth in publications focusing on the application of BC-LB in orthopedics, with China and the United States leading in research output. The "International Journal of Biological Macromolecules" was identified as the most cited journal for BC-LB research in orthopedics. The research hotspots encompassed bone tissue engineering, cartilage tissue engineering, and drug delivery systems, indicating the fundamental research and potential development in these areas. This study also highlights the challenges associated with the clinical application of BC-LB in orthopedics and provides valuable insights for future advancements in the field.

Recyclable and mechanically tough nanocellulose reinforced natural rubber composite conductive elastomers for flexible multifunctional sensor.

The development of flexible wearable multifunctional electronics has gained great attention in the field of human motion monitoring. However, developing mechanically tough, highly stretchable, and recyclable composite conductive materials for application in multifunctional sensors remained great challenges. In this work, a mechanically tough, highly stretchable, and recyclable composite conductive elastomer with the dynamic physical-chemical dual-crosslinking network was fabricated by the combination of multiple hydrogen bonds and dynamic ester bonds. To prepare the proposed composite elastomers, the polyaniline-modified carboxylate cellulose nanocrystals (C-CNC@PANI) were used as both conductive filler to yield high conductivity of 15.08 mS/m, and mechanical reinforcement to construct the dynamic dual-crosslinking network with epoxidized natural rubber latex to realize the high mechanical strength (8.65 MPa) and toughness (29.57 MJ/m3). Meanwhile, the construction of dynamic dual-crosslinking network endowed the elastomer with satisfactory recyclability. Based on these features, the composite conductive elastomers were used as strain sensors, and electrode material for assembling flexible and recyclable self-powered sensors for monitoring human motions. Importantly, the composite conductive elastomers maintained reliable sensing and energy harvesting performance even after multiple recycling process. This study provides a new strategy for the preparation of recyclable, mechanically tough composite conductive materials for wearable sensors.

Organic-inorganic hybrid ZIF-8/MXene/cellulose-based textiles with improved antibacterial and electromagnetic interference shielding performance.

Despite the tremendous efforts on developing antibacterial wearable textile materials containing Ti3C2Tx MXene, the singular antimicrobial mechanism, poor antibacterial durability, and oxidation susceptibility of MXene limits their applications. In this context, flexible multifunctional cellulosic textiles were prepared via layer-by-layer assembly of MXene and the in-situ synthesis of zeolitic imidazolate framework-8 (ZIF-8). Specifically, the introduction of highly conductive MXene enhanced the interface interactions between the ZIF-8 layer and cellulose fibers, endowing the green-based materials with outstanding synergistic photothermal/photodynamic therapy (PTT/PDT) activity and adjustable electromagnetic interference (EMI) shielding performance. In-situ polymerization formed a MXene/ZIF-8 bilayer structure, promoting the generation of reactive oxygen species (ROS) while protecting MXene from oxidation. The as-prepared smart textile exhibited excellent bactericidal efficacy of >99.99 % against both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) after 5 min of NIR (300 mW cm-2) irradiation which is below the maximum permissible exposure (MPE) limit. The sustained released Zn2+ from the ZIF-8 layer achieved a bactericidal efficiency of over 99.99 % within 48 h without NIR light. Furthermore, this smart textile also demonstrated remarkable EMI shielding efficiency (47.7 dB). Clearly, this study provides an elaborate strategy for designing and constructing multifunctional cellulose-based materials for a variety of applications.

Fabrication of fully bio-based malleable thermoset derived from cellulose, furfural and plant oil for advanced capacitive sensor.

Fabrication of sustainable bio-based malleable thermosets (BMTs) with excellent mechanical properties and reprocessing ability for applications in electronic devices has attracted more and more attention but remains significant challenges. Herein, the BMTs with excellent mechanical robustness and reprocessing ability were fabricated via integrating with radical polymerization and Schiff-base chemistry, and employed as the flexible substrate to prepare the capacitive sensor. To prepare the BMTs, an elastic bio-copolymer derived from plant oil and 5-hydroxymethylfurfural was first synthesized, and then used to fabricate the dynamic crosslinked BMTs through Schiff-base chemistry with the amino-modified cellulose and polyether amine. The synergistic effect of rigid cellulose backbone and the construction of dynamic covalent crosslinking network not only achieved high tensile strength (8.61 MPa) and toughness (3.77 MJ/m3) but also endowed the BMTs with excellent reprocessing ability with high mechanical toughness recovery efficiency of 104.8 %. More importantly, the BMTs were used as substrates to fabricate the capacitive sensor through the CO2-laser irradiation technique. The resultant capacitive sensor displayed excellent and sensitive humidity sensing performance, which allowed it to be successfully applied in human health monitoring. This work paved a promising way for the preparation of mechanical robustness malleable bio-thermosets for electronic devices.

Biomimetic construction of environmental-tolerant composite hydrogels based on galactomannan for tough, flexible and conductive sensors.

Sustainable composite hydrogel materials with harsh environmental adaption and tolerance capability have received considerable interests but still remain as challenges. In this work, biomimetic strategy was adapted for construction of three-dimensional galactomannan (GM) hydrogels with intercalation of flexible polymer chains polyethyleneimine (PEI), biomacromolecules tannin acid (TA) and CeO2 nanoparticles (NPs). The hydrogels cross-linked with double-networks (DN) present not only pH-responsive water absorption property, but also boosted mechanical strength with highest toughness of 326 kJ/m3 and Young's modulus of 220 kPa. Self-healing and anti-freezing capabilities were revealed for the hydrogels by maintaining of fracture elongation (23 %) and fracture strength (250 kPa). TA, CeO2 NPs as well as the amide groups in PEI of the hydrogels introduced excellent bacterial prohibition performance on both Bacillus subtilis (B. subtilis) and Escherichia coli (E. coli). Also, due to the existence of the free ions, the hydrogels exhibited electric conductive properties, with wide-range high sensitivity and long-time conductive stability. In addition, various tensile strain degrees were related to the conductive resistance values, and the great recovery performance was proved by cyclic tensile-conductive tests for 3000 times. Therefore, the proposed GM-based hydrogels displayed great potentials as strain sensors that are adaptable and tolerant to various environmental conditions.

Multifunctional targeting of docetaxel plus bakuchiol micelles in the treatment of invasion and metastasis of ovarian cancer.

The invasion and metastasis of tumors pose significant challenges in the treatment of ovarian cancer (OC), making it difficult to cure. One potential treatment approach that has gained attention is the use of matrix metalloproteinase reactive controlled release micelle preparations. In this study, we developed a novel PEG5000-PVGLIG-hyaluronic acid docetaxel/bakuchiol (PP-HA-DTX/BAK) micelles formulation with desirable characteristics such as particle size, narrow polydispersity index, and a ZETA potential of approximately -5 mV. The surface modification with HA facilitates tumor penetration into the tumor interior, while the incorporation of DSPE-PEG2000-PVGLIG-PEG5000helps conceal DSPE-PEG2000-HA, reducing off-target effects and prolonging drug circulation timein vivo. Bothin vitroandin vivoexperiments demonstrated that these micelles effectively inhibit proliferation, invasion, and metastasis of OC cells while promoting apoptosis. Therefore, our findings suggest that PP-HA-DTX/BAK micelles represent a safe and effective therapeutic strategy for treating OC.

The impact of arbuscular mycorrhizal fungi and endophytic bacteria on peanuts under the combined pollution of cadmium and microplastics.

It remains unclear how symbiotic microbes impact the growth of peanuts when they are exposed to the pollutants cadmium (Cd) and microplastics (MPs) simultaneously. This study aimed to investigate the effects of endophytic bacteria Bacillus velezens SC60 and arbuscular mycorrhizal fungus Rhizophagus irregularis on peanut growth and rhizosphere microbial communities in the presence of Cd at 40 (Cd40) or 80 (Cd80) mg kg-1 combined without MP or the presence of low-density polyethylene (LDPE) and poly butyleneadipate-co-terephthalate (PBAT). This study assessed soil indicators, plant parameters, and Cd accumulation indicators. Results showed that the application of R. irregularis and B. velezens significantly enhanced soil organic carbon and increased Cd content under the conditions of Cd80 and MPs co-pollution. R. irregularis and B. velezens treatment increased peanut absorption and the enrichment coefficient for Cd, with predominate concentrations localized in the peanut roots, especially under combined pollution by Cd and MPs. Under treatments with Cd40 and Cd80 combined with PBAT pollution, soil microbes Proteobacteria exhibited a higher relative abundance, while Actinobacteria showed a higher relative abundance under treatments with Cd40 and Cd80 combined with LDPE pollution. In conclusion, under the combined pollution conditions of MPs and Cd, the co-treatment of R. irregularis and B. velezens effectively immobilized Cd in peanut roots, impeding its translocation to the shoot.

Rational design of a DNA-launched live attenuated vaccine against human enterovirus 71.

Human Enterovirus 71 (EV71) has emerged as one of the predominant causative agents of hand, foot and mouth disease (HFMD) with global impact. Despite the inactivated vaccine being licensed, other vaccine candidates based on advanced technology platforms are under development. In this report, we rationally designed and constructed two DNA-launched live attenuated vaccine candidates (pDL-EV71) under the control of specific promoters. In vitro and in vivo transfection with pDL-EV71 driven by the CMV promoter successfully yielded fully infectious EV71. More importantly, the administration of pDL-EV71 did not cause clinical symptoms following intracranial or intramuscular inoculation in neonatal and IFNα/ßR-/- mice, demonstrating its safety profile. Moreover, a single-dose or two-dose immunization with pDL-EV71 elicited robust neutralizing antibodies against EV71 as well as an antigen-specific cellular response in mice. A single-dose immunization with 10 µg of pDL-EV71 conferred complete protection against lethal EV71 infection in neonates born to immunized maternal mice. Overall, our present results demonstrate that pDL-EV71 is a safe and effective vaccine candidate against EV71 for further development.