Ion Exchange and Antibiofouling Properties of Poly(ether sulfone) Membranes Prepared by the Surface Immobilization of Brønsted Acidic Ionic Liquids via Double-Click Reactions.

Brønsted acidic ionic liquids (BAILs) are unique ionic liquids that display chemical structures similar to zwitterions, and they were typically used as solvents and catalysts. In this work, an imidazole-based BAIL monolayer was fabricated onto poly(ether sulfone) (PES) membranes via surface clicking reactions, and the multifunctionality, including ion exchange and biofouling resistance to proteins and bacteria, was demonstrated, which was believed to be one of few works in which BAIL had been considered to be a novel fouling resistance layer for porous membranes. The successful immobilization of the BAILs onto a membrane surface was confirmed by X-ray photoelectron spectroscopy analysis, contact angle measurement, and ζ potential determination. The results from Raman spectroscopy showed that, as a decisive step prior to zwitterion, the BAIL was deprotonated in aqueous solution, and biofouling resistance to proteins and bacteria was found. However, BAIL displayed ion exchange ability at lower pH, and surface hydrophilicity/hydrophobicity of membranes could be tuned on purpose. Our results have demonstrated that the BAIL grafted onto membranes will not only act as an antibiofouling barrier like zwitterions but also provide a platform for surface chemical tailoring by ion exchange, the property of which will become especially important in acidic solutions where the fouling resistance performances of zwitterions are greatly weakened.

Bacterial community are more susceptible to nanoplastics than algae community in aquatic ecosystems dominated by submerged macrophytes.

As a ubiquitous emerging pollutant, microplastics can interact with algal and bacterial communities in aquatic ecosystems. Currently, knowledge on how microplastics influence algae/bacteria is mostly limited to toxicity tests using either monocultures of algae/bacteria or specific algal-bacterial consortium. However, information on the effect of microplastics on algal and bacterial communities in natural habitats is not easily available. Here, we conducted a mesocosm experiment to test the effect of nanoplastics on algal and bacterial communities in aquatic ecosystems dominated by different submerged macrophytes. The community structure of algae and bacteria suspended in the water column (planktonic) and attached to the surface of submerged macrophytes (phyllospheric) were identified, respectively. Results showed that both planktonic and phyllospheric bacteria were more susceptible to nanoplastics, and these variations driven by decreased bacterial diversity and increased abundance of microplastic-degrading taxa, especially in aquatic systems dominated by V. natans. The community composition of both algae and bacteria were influenced to varying degrees by nanoplastics and/or plant types, but RDA results showed that only bacterial community composition was strongly correlated with environmental variables. Correlation network analysis showed that nanoplastics not only reduced the intensity of associations between planktonic algae and bacteria (average degree reduced from 4.88 to 3.24), but also reduced proportion of positive correlations (from 64% to 36%). Besides, nanoplastics also decreased the algal/bacterial connections between planktonic and phyllospheric habitats. Our study elucidates the potential interactions between nanoplastics and algal-bacterial community in natural aquatic ecosystems. These findings suggest that in aquatic ecosystems, bacterial community are more vulnerable to nanoplastics and may serve as a protective barrier for algae community. Further research is needed to reveal the protective mechanism of bacteria against algae at the community level.

Identification of six novel variants from nine Chinese families with hypophosphatemic rickets.

BACKGROUND: Hypophosphatemic rickets (HR) is a rare genetic disorder associated with renal phosphate wasting and characterized by bone defects. Inactivating mutations in the phosphate regulating endopeptidase homolog X­linked gene (PHEX) account for most cases of HR. The aim of this study was to identify causative variants in nine unrelated Chinese families associated with HR, and to determine potential pathogenicity of the identified variants. METHODS: Genomic DNA was isolated from the peripheral blood of HR patients and their healthy relatives, followed by next-generation sequencing and/or Sanger sequencing. In silico prediction combined with conservation analysis was performed to assess the effects of the variants, and 3D protein modeling was conducted to predict the functional effects on the encoded protein. RESULTS: All HR patients recruited in this study displayed bone deformities and tooth agenesis, as well as reduced serum phosphate levels and elevated urine phosphate levels. Nine PHEX variants were identified in eight families, including four novel variants (c.1661_1726del, c.980A > G, c.1078A > T, and c.1017_1051dup). Of the nine identified PHEX variants, five caused a truncated protein, two caused an altered amino acid, and the other two were the canonical splicing variants. Novel variants c.1336G > A and c.1364 T > C in SLC34A3 were also found in one family. Conservation analysis showed that all the amino acids corresponding to the missense variants were highly conserved. In silico analysis and 3D protein structure modeling confirmed the pathogenicity of these variants. CONCLUSIONS: This study identified four novel variants in PHEX and two novel variants in SLC34A3 in a Chinese cohort with HR. Our findings highlight the dominant role of PHEX in HR, and expand the genotypic and phenotypic spectra of this disorder.

[Distribution features of surface stress on the bilateral condyles of the unilateral mandible model for 3 kinds of surgeries of temporomandibular joint ankylosis].

OBJECTIVE: To determine the distribution features of surface stress on the bilateral condyles of the normal mandible and the unilateral mandible model for 3 kinds of surgeries of temporomandibular joint ankylosis under normal occlusal strength. METHODS: The normal mandible 3-dimensional finite element model and the 3-dimensional finite element mandible model for 3 kinds of surgeries of unilateral temporomandibular joint ankylosis were built. The jaw triangle area and the condyle transverse ridge was fixed and bound at mid-point. And 100 N of load was applied to the first molars of the bilateral mandible to obtain a von Mises stress diagram of the condylar surface and the unit von Mises stress of the condylar surface. Statistical analysis was carried out. RESULTS: The transmission of von Mises stress at the operated side of fractured articular arthroplasty of the condylar was interrupted. The von Mises stress at the operated side of the condylar in the group of point-surface contact joint reconstruction was bigger than that of the normal group (P<0.05) whereas there was no significant difference between the group of surface-surface contact joint reconstruction group and the normal group (P>0.05). The von Mises stress of the condylar at the non-operated side in the group of fractured articular arthroplasty was bigger than that of the normal group (P<0.05), whereas there was no significant difference between the group of point-surface contact or surface-surface contact group and the normal group (P>0.05). CONCLUSION: The surface-surface articular reconstruction is beneficial to the recovery of the masticatory function without increasing the burden for contralateral temporomandibular joint and is helpful to the joint. Thus this surgical method is recommended.

Exome sequencing reveals a novel MFN2 missense mutation in a Chinese family with Charcot-Marie-Tooth type 2A.

Charcot-Marie-Tooth (CMT) is a group of inherited peripheral neuropathies. To date, mutations in >80 genes are reportedly associated with CMT. Protein mitofusin 2 encoded by MFN2 serves an essential role in mitochondrial fusion and regulation of apoptosis, which has previously been reported to be highly associated with an axonal form of neuropathy (CMT2A). In the present study, a large Chinese family with severe CMT was reported and a genetic analysis of the disease was performed. A detailed physical examination for CMT was performed in 13 family members and electrophysiological examinations were performed in 3 affected family members. Whole-exome sequencing was performed on the proband, and the suspected variants were identified by Sanger sequencing. The pathogenicity of mutation was verified by restriction fragment length polymorphism analysis in the family followed by a bioinformatics analysis. A novel c.1190G>C; p.(R397P) mutation in the MFN2 gene was identified in the proband, and co-segregated between genotype and phenotype in the family. The substituted amino acid changed the hydrophobicity and charge characteristics of the mitofusin 2 coiled-coiled domain; thus it may affect its biological function. In summary, a novel pathogenic mutation was identified in a Chinese family with CMT, which expands the phenotypic and mutational spectrum of CMT2A, and provides evidence for prenatal interventions and more precise pharmacological treatments to this family.

Improved protein-adsorption resistance of polyethersulfone membranes via surface segregation of ultrahigh molecular weight poly(styrene-alt-maleic anhydride).

A styrene-maleic anhydride (SMA) alternating copolymer with ultrahigh molecular weight (M(w)>10(6)) synthesized in super critical carbon dioxide (SC CO(2)) medium was used as hydrophilic polymeric additive in the preparation of polyethersulfone (PES) membranes. The PES/SMA blend membranes were prepared by immersion precipitation process. X-ray photoelectronic spectroscopy (XPS) measurements confirmed that the hydrolyzed SMA preferentially segregated to membrane-coagulant interface during membrane formation. For the PES/SMA blend membranes, no big change was observed in the cross-sectional structure and the mechanical properties were well maintained after SMA addition except that a thicker top layer was formed. The surface morphology analysis by atomic force microscopy (AFM) showed that the membrane surface roughness increased with the added SMA amount. The results of water contact angle, water absorbance measurements and static protein adsorption experiments revealed that the surface enrichment of SMA endowed PES/SMA blend membranes with significantly improved surface hydrophilicity and protein-adsorption resistance.

The Complete mitochondrial genome of Spinibarbus denticulatus (Oshima).

Spinibarbus denticulatus (Oshima) is a rare and commercial fish. The complete mitochondrial genome sequence of S. denticulatus will help us to study the genetic of conversation, such as the genetic diversity and genetic structure, and provides the basis for the study in evolution. In this paper, the complete mitochondrial genome of S. denticulatus was determined to be 16,549 bp in length by Sanger sequencing technology. Thirteen protein-coding genes, 22 tRNA genes and 2 ribosomal genes were characterized. We also analyzed the structure of control region, 6 CSBs (CSB-1, CSB-2, CSB-3, CSB-D, CSB-E and CSB-F) and 1 TAS were identified, the control region also included an AT unit tandem repeat with 17 repeat times.

Hemocompatible and antibacterial porous membranes with heparinized copper hydroxide nanofibers as separation layer.

Here we report the fabrication of a novel heparinized copper hydroxide (Cu(OH)2) nanofiberous membrane with satisfying hemocompatibility and antibacterial properties. The positively charged Cu(OH)2 nanofibers were prepared in a weakly alkaline copper nitrate solution in the presence of 2-aminoethanol. A heparin (Hep) solution was then added dropwise into the solution of nanofibers to immobilize negatively charged heparin onto the Cu(OH)2 nanofibers by electrostatic interaction. A composite Hep@Cu(OH)2 nanofiberous membrane was prepared by filtration and deposition of the heparinized nanofibers onto a polysulfone (PSF) porous membrane. Chemical composition analysis of membrane surface using X-ray photoelectron spectroscopy (XPS) confirmed the successful immobilization of heparin on Cu(OH)2 nanofibers. The amount of immobilized heparin on nanofiberous membrane was determined by a colorimetric assay of toluidine blue dye and the results showed that the amount of immobilized heparin was strongly dependent on the heparin dosage in reaction solution. The results of contact angle measurement indicated that the hydrophilicity of Cu(OH)2 nanofiberous membranes was enhanced by the immobilization of heparin. The adhesion, activation and transmutation of platelets on Hep@Cu(OH)2 membrane were suppressed remarkably due to the introduction of heparin, which suggested that the Hep@Cu(OH)2 membranes had good hemocompatibility. In addition, Cu(OH)2 and Hep@Cu(OH)2 nanofiberous membranes exhibited very good antibacterial activities against Escherichia coli and Staphyloccocus aureus.

Immobilization of bovine serum albumin onto porous polyethylene membranes using strongly attached polydopamine as a spacer.

Based on the self-polymerization and strong adhesion characteristics of dopamine in aqueous solution, a novel and convenient approach was developed to immobilize protein onto porous polyethylene (PE) membranes. A thin polydopamine (pDA) layer was formed and tightly coated onto PE membrane by dipping simply the membrane into dopamine aqueous solution for a period of time. Subsequently, bovine serum albumin (BSA) was bound onto the obtained PE/pDA composite membranes via the coupling between BSA and the reactive polydopamine layer. The firm immobilization of polydopamine layer and BSA was verified by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). The results of water contact angle measurement showed that the hydrophilicity of PE membrane was significantly improved after coating polydopamine and binding BSA. The experiments of blood platelet adhesion indicated that BSA-immobilized PE membrane had better blood compatibility than the unmodified PE and the PE/pDA composite membranes. The investigations on hepatocyte cultures and cell viability revealed that the polydopamine coating endowed PE membrane with significantly improved cell compatibility. Compared to BSA surface, polydopamine surface is more favorable for cell adhesion, growth, and proliferation.

Fabrication of superhydrophilic poly(styrene-alt-maleic anhydride)/silica hybrid surfaces on poly(vinylidene fluoride) membranes.

Superhydrophilic organic/inorganic hybrid surfaces have been fabricated on blend membranes of poly(vinylidene fluoride) (PVDF) and poly(styrene-alt-maleic anhydride) (SMA). The blend membranes were prepared from PVDF/SMA mixed solution with N,N-dimethylacetamide (DMAc) as solvent by immersion-precipitation phase inversion process. The gained blend membranes were immersed into γ-aminopropyltriethoxysilane (APTS) solution to generate SMA/silica hybrid surfaces by the reaction between anhydrides and APTS. The hybrid surfaces chemical compositions, morphologies and hydrophilicity were investigated in detail. It demonstrates that the hybrid surfaces possess micro-nano hierarchical structure and display superhydrophilicity property and good stability. Finally, the reaction and formation mechanism of the superhydrophilicity hybrid surface was discussed.

[Membrane fouling control in a free-end comb-like hollow fiber membrane bioreactor].

A free-end comb-like hollow fiber membrane bioreactor was applied to treat wastewater. The results clearly showed that membrane fouling, defined as permeate flux decline, was greatly influenced by membrane module configuration. The permeate flux decline was much less for module b, demonstrating the superiority of module b over module a. Its permeate flux could be maintained in the range of 4.0 to 8.0 L x (m2 x h)(-1) under the operating conditions that temperature was 22-26 degrees C, the mixed liquor suspended solids (MLSS) concentration was 7500-10500 mg/L, aeration intensity was 200 L/h, suction time/ suspended time ratio was 9 min/1 min and suction pressure was 0.02 MPa. As this novel kind of membrane module resulted in high air scouring efficiency, relatively low aeration intensity was needed for the MBR maintenance. In addition, the permeate flux varied a little when suction time/ suspended time ratio changed from 12 min/1 min to 6 min/1 min. The performances of several different cleaning methods were tested and the results indicated that water cleaning + chemical cleaning + ethanol soaking had the best cleaning efficiency. SEM images clearly showed that the membrane surface became cleaner and the membrane holes became more visible after water cleaning + chemical cleaning, compared with water cleaning solely.

Surface modification of PVDF porous membranes via poly(DOPA) coating and heparin immobilization.

Based on the strong adhesive behavior of poly(3,4-dihydroxy-l-phenylalanine) (or poly(DOPA)) on solid surface, poly(vinylidene fluoride) (PVDF) microporous membranes were surface-modified by the self-polymerization of DOPA in aqueous solution. Subsequently, heparin was immobilized covalently onto the obtained PVDF/poly(DOPA) composite membranes by the coupling between heparin and poly(DOPA) coating. The modified membranes were subjected to a long-term washing, and the firm immobilization of poly(DOPA) and heparin was confirmed by X-ray photoelectron spectroscopy (XPS). The results of water contact angle measurements showed that the hydrophilicity of PVDF membranes was significantly improved by the incorporation of poly(DOPA) and heparin. The effects of poly(DOPA) and heparin on membrane surface morphologies were also investigated by scanning electron microscopy (SEM).

Improving hydrophilicity and protein resistance of poly(vinylidene fluoride) membranes by blending with amphiphilic hyperbranched-star polymer.

To endow hydrophobic poly(vinylidene fluoride) (PVDF) membranes with reliable hydrophilicity and protein resistance, an amphiphilic hyperbranched-star polymer (HPE-g-MPEG) with about 12 hydrophilic arms in each molecule was synthesized by grafting methoxy poly(ethylene glycol) (MPEG) to the hyperbranched polyester (HPE) molecule using terephthaloyl chloride (TPC) as the coupling agent and blended with PVDF to fabricate porous membranes via phase inversion process. The chemical composition changes of the membrane surface were confirmed by X-ray photoelectron spectroscopy (XPS), and the membrane morphologies were measured by scanning electron microscopy (SEM). Water contact angle, static protein adsorption, and filtration experiments were used to evaluate the hydrophilicity and anti-fouling properties of the membranes. It was found that MPEG segments of HPE-g-MPEG enriched at the membrane surface substantially, while the water contact angle decreased as low as 49 degrees for the membrane with a HPE-g-MPEG/PVDF ratio of 3/10. More importantly, the water contact angle of the blend membrane changed little after being leached continuously in water at 60 degrees C for 30 days, indicating a quite stable presence of HPE-g-MPEG in the blend membranes. Furthermore, the blend membranes showed lower static protein adsorption, higher water and protein solution fluxes, and better water flux recovery after cleaning than the pure PVDF membrane.

[Study on the process for wastewater treatment in submerged rotating membrane bioreactor].

The process for wastewater treatment in submerged rotating membrane bioreactor (SRMBR) was studied. It was found that the effluent COD reduced to 20 mg/L after one day running when the influent COD varied from 160 mg/L to 368 mg/L. The equilibrium membrane flux increased rapidly with increasing rotation speed of membrane in the range of 0 to 25r/min. Within one minute, the increase of suspended suction time could alleviate the membrane fouling. Moreover, higher membrane flux could be reached even at lower aeration/water ratio (15:1) in SRMBR process. The optimum processing condition was suggested as follows: the rotation speed was 25r/min, suction time/suspended time was 9 min/1 min, aeration/water ratio was 15/1, and operation pressure was 25kPa. Under this condition, the equilibrium membrane flux could reach 53.75 L/(m2 x h).

Novel, fluorescent, magnetic, polysaccharide-based microsphere for orientation, tracing, and anticoagulation: preparation and characterization.

A fluorescent, magnetic composite poly(styrene-maleic anhydride) microsphere, suitable for conjugation with polysaccharide, was synthesized using magnetite/europium phthalate particles as seeds by copolymerization of styrene and maleic anhydride. The magnetite/europium phthalate particles were wrapped up by poly(ethylene glycol), which improved the affinity between the seed particles and the monomers. The composite microspheres obtained, with a diameter of 0.15-0.7 microm, contain 586-1013 microg of magnetite/g of microsphere and 0.5-16 mmol surface anhydride groups/g of microsphere. Heparin was conjugated with the reactive surface anhydride groups on the surface of the microspheres by covalent binding to obtain a fluorescent, magnetic, polysaccharide-based microsphere. The microspheres not only retain their bioactivities but also provide magnetic susceptibility and fluorescence. They can be used as a carrier with magnetic orientation and fluorescence tracer for potent drug targeting. The orientation, tracer, and anticoagulation of the fluorescence, magnetic, polysaccharide-based microspheres were studied. The anticoagulant activity of the microspheres and heparin binding capacity reached 54,212.8 U and 607.1 mg/g of dry microspheres. The activity recovery was 50.2%. The anticoagulant activity of the microspheres increases with the increase of the conjugated heparin on the surface of the microspheres and the decrease of the microsphere size. Furthermore, The fluorescent, magnetic, polysaccharide-based microspheres can be easily transported to a given position in a magnetic field and traced via their fluorescence.