Evaluating the effect of mechanical debridement with adjunctive antimicrobial photodynamic therapy in comparison with mechanical debridement alone on the peri-implant parameters in type 2 diabetic mellitus patients with peri-implantitis: a systematic review and meta-analysis.

BACKGROUND: Type 2 diabetes mellitus (T2DM) is a major risk factor for localized diseases such as peri-implantitis that may affect ideal implant treatment. This study was aimed to evaluate the effect of mechanical debridement (MD) + antimicrobial photodynamic therapy (a-PDT) in patients with peri-implantitis who have T2DM in terms of bleeding on probing (BOP) and probing depth (PD) as primary outcomes and plaque index (PI) and crestal bone loss (CBL) as secondary outcomes. METHODS: Publications compared outcomes between MD + aPDT and MD alone in T2DM patients with peri-implantitis, containing more than 3-month follow-up duration, were involved in the systematic review and meta-analysis. Literature until July 2023 using MEDLINE (through PubMed), Scopus, Cochrane Library, Embase, Web of Science, and Google Scholar were collected. RESULTS: Two randomized controlled trials (RCTs, 88 individuals) and one controlled clinical trial (CCT, 67 individuals) with follow-up periods ranged from 3 to 12 months were recruited. All studies used diode laser with wavelengths ranged from 660 to 810 nm. The results demonstrated that the MD + aPDT group showed significant benefits for BOP reduction after 6 months (SMD = -2.15, 95% CI: -3.78 to -0.51, p = 0.01). However, a great amount of heterogeneity was observed (I2 = 91.52%, p < 0.001). Moreover, there was a significant difference between MD + aPDT and MD alone groups in CBL (SMD = -0.69, 95% CI: -1.07 to -0.30, p < 0.001). In addition, homogeneity assumption was satisfied (I2 = 22.49%, p = 0.28). Significant differences in PD and PI reduction were not found except for PI reduction after 3 months (SMD = -0.79, 95% CI: -1.24 to -0.33, p < 0.001. Also, no heterogeneity was observed (I2 = 0.00%, p = 0.47). CONCLUSION: Given that high heterogeneity in BOP and PD outcome was found in this systematic review, future long-term CTs with MD + aPDT should be examined to arrive at a firm conclusion.

Evaluation of CSTB and DMBT1 expression in saliva of gastric cancer patients and controls.

BACKGROUND: Gastric cancer (GC) is the fifth most common cancer and the third cause of cancer deaths globally, with late diagnosis, low survival rate, and poor prognosis. This case-control study aimed to evaluate the expression of cystatin B (CSTB) and deleted in malignant brain tumor 1 (DMBT1) in the saliva of GC patients with healthy individuals to construct diagnostic algorithms using statistical analysis and machine learning methods. METHODS: Demographic data, clinical characteristics, and food intake habits of the case and control group were gathered through a standard checklist. Unstimulated whole saliva samples were taken from 31 healthy individuals and 31 GC patients. Through ELISA test and statistical analysis, the expression of salivary CSTB and DMBT1 proteins was evaluated. To construct diagnostic algorithms, we used the machine learning method. RESULTS: The mean salivary expression of CSTB in GC patients was significantly lower (115.55 ± 7.06, p = 0.001), and the mean salivary expression of DMBT1 in GC patients was significantly higher (171.88 ± 39.67, p = 0.002) than the control. Multiple linear regression analysis demonstrated that GC was significantly correlated with high levels of DMBT1 after controlling the effects of age of participants (R2 = 0.20, p < 0.001). Considering salivary CSTB greater than 119.06 ng/mL as an optimal cut-off value, the sensitivity and specificity of CSTB in the diagnosis of GC were 83.87 and 70.97%, respectively. The area under the ROC curve was calculated as 0.728. The optimal cut-off value of DMBT1 for differentiating GC patients from controls was greater than 146.33 ng/mL (sensitivity = 80.65% and specificity = 64.52%). The area under the ROC curve was up to 0.741. As a result of the machine learning method, the area under the receiver-operating characteristic curve for the diagnostic ability of CSTB, DMBT1, demographic data, clinical characteristics, and food intake habits was 0.95. The machine learning model's sensitivity, specificity, and accuracy were 100, 70.8, and 80.5%, respectively. CONCLUSION: Salivary levels of DMBT1 and CSTB may be accurate in diagnosing GCs. Machine learning analyses using salivary biomarkers, demographic, clinical, and nutrition habits data simultaneously could provide affordability models with acceptable accuracy for differentiation of GC by a cost-effective and non-invasive method.

Efficacy and safety of chitosan-based bio-compatible dressing versus nanosilver (ActicoatTM ) dressing in treatment of recalcitrant diabetic wounds: A randomized clinical trial.

Chitosan has a biocompatible, biodegradable, and nontoxic nature. The effectiveness of Nano-chitosan films in the field of wound healing has been confirmed previously. The aim of this study was to compare the clinical efficacy and safety of two dressings (chitosan and nanosilver dressings) in the treatment of refractory diabetic wounds. A total of 25 eligible patients with chronic diabetic wound were included and randomly assigned to receive chitosan (13 patients) or nanosilver (12 cases) dressing. The dressings were applied on the wounds based on their protocols and patients were visited and examined by an experienced dermatologist every week. The clinical assessments and healing rates were recorded using diabetic-foot-infection (DFI) score at the 2nd, 4th, and 6th weeks during treatment. The study endpoint, safety and tolerability profile were also documented. The patterns of change in total 10-item-DFI wound scores did not differ significantly over time between the two groups. In both groups, the total 10-item-DFI wound score reduced continuously through the course of study. The mean percentage reduction of this score from baseline was 78.1% and 74.1% in the chitosan and nanosilver dressing groups, respectively. Both dressings were well tolerated and there were no adverse events. The relatively small sample size in both groups was the main limitation of the study. Our findings confirmed that chitosan may be safely and effectively used for the treatment of diabetic wounds just like the nanosilver (ActicoatTM ) dressing. Further studies are recommended with more volunteers and a longer follow-up period.

Comparison of clinical efficacy of CAD CAM Endocrowns made of feldspathic ceramic, zirconia lithium silicate, and lithium disilicate: A two-year mixed cohort study.

OBJECTIVE: Endocrowns can be fabricated from various materials as a treatment option for endodontically treated teeth. This mixed cohort study aimed to demonstrate the clinical efficacy of Endocrowns made of feldspathic, zirconia lithium silicate, and lithium disilicate ceramics using a chairside CAD/CAM system. METHODS: The present study compared the clinical outcomes of 141 Endocrown restorations in posterior teeth of 85 patients in a two-year follow-up. The efficacy of restorations was evaluated in three aspects: esthetics, biological response, and function, with the aid of the FDI guideline, and presented as descriptive analyses. Additionally, the data were analyzed using Chi-square and Spearman correlation tests. The significance level was set at p = 0.05. RESULTS: The study findings revealed that the type of restorations (feldspathic ceramic, zirconia lithium silicate, and lithium disilicate) (p > 0.05) and underlying teeth (molars and premolars) (p > 0.05) play no part in restorations' failure. Caries' recurrence is primarily responsible for the failure of the endocrowns. Secondary caries and radiolucency were observed in four teeth (2.83 %). The clinical efficacy of 126 restorations (89.36 %) fell into the category of "clinically excellent" and "clinically good." Ten restorations (7.09 %) were classified as "clinically sufficient/satisfactory," and only five restorations (3.54 %) needed replacement due to having "clinically unsatisfactory" and "clinically poor" quality. CONCLUSIONS: Endocrowns showed a high success rate and durability in the short term, therefore can be considered a safe choice for restoring endodontically treated teeth. It is worth noting that caries were the most common reason for the failure of the restorations. CLINICAL SIGNIFICANCE: Endocrowns made of different ceramics have been proven reliable restorations for endodontically treated molars and premolars.

Efficacy of Adjunctive Antimicrobial Photodynamic Therapy to Mechanical Debridement in the Treatment of Peri-implantitis or Peri-implant Mucositis in Smokers: A Systematic Review and Meta-analysis.

This systematic review and meta-analysis aimed to determine whether adjunctive use of antimicrobial photodynamic therapy (a-PDT) in peri-implant diseases improves clinical outcomes in smokers. An electronic search was performed in MEDLINE (through PubMed), Scopus, Cochrane Library, Embase, Web of Science and Google Scholar. The primary outcome measures were bleeding on probing (BOP) and pocket depth (PD). Plaque index (PI) was the secondary outcome. Four RCTs, (188 participants) comprised of 118 cigarette smokers, 38 E-cig smokers and 32 water pipe smokers with follow-up periods ranged from 6 weeks to 6 months were recruited. All trials applied diode laser in one session with wavelengths ranged from 660 to 670 nm. There was a significant difference between mechanical debridement (MD)+a-PDT and MD alone groups in PD (WMD = -1.26 mm, 95% CI: -2.19 to -0.32, P = 0.01) and PI (WMD = -10.60%, 95% CI: -14.46 to -6.74, P < 0.001) at 3-month follow-up. However, a great amount of heterogeneity was observed (PD: χ2 = 199.19, I2 = 98%, P < 0.001 and PI: χ2 = 25.63, I2 = 84.4%, P < 0.001). Due to methodological heterogeneity and small number of studies, this systematic review was unable to reach conclusive evidence in regards of adjunctive a-PDT efficacy in improving clinical parameters in smokers.

Evaluating the effect of repeated use of milling burs on surface roughness and adaptation of digitally fabricated ceramic veneers.

OBJECTIVES: This study aimed to evaluate how repeated use of milling diamond burs with different coarseness affects surface roughness, and marginal and internal adaptation of CAD/CAM veneers. METHODS: Forty leucite-reinforced glass-ceramic veneers were milled in 2 groups based on the milling mode (with fine or extra-fine bur sets). In each group, every 10 veneers were milled with a new bur set. All veneers were cemented to bovine teeth and then polished. Labial surface roughness was measured before cementation, and after polishing. Marginal and internal discrepancies were measured using a field emission scanning electron microscope. Three-way and two-way mixed repeated measures ANOVA were applied to assess changes in surface roughness values of veneers and discrepancy values, respectively. The Bonferroni correction was applied for multiple comparisons. RESULTS: Repeated use of a milling diamond bur set had a significant effect on surface roughness of the veneers (P < .001). Mean surface roughness of the fine milling mode was significantly higher in comparison to that of extra-fine mode before (P = .002) and after (P = .01) polishing. After polishing a significant decrease in surface roughness occurred in fine (P = .02), but not in extra-fine milling mode (P = .99). Repeated use of milling burs significantly affected marginal and internal adaptation between some repeated uses. CONCLUSIONS: Marginal and internal adaptation were significantly affected by repeated use of milling diamond burs up to 10 times between some repeated uses. However, no specific pattern could be established. CLINICAL SIGNIFICANCE: Repeated use of milling burs could affect surface roughness, surface microcracks, critical defects, and adaptation of CAD/CAM restorations. Therefore, it plays a major role in clinical success of the restorations.

Effectiveness of Different Modalities of Lip Repositioning Surgery for Management of Patients Complaining of Excessive Gingival Display: A Systematic Review and Meta-Analysis.

PURPOSE: This study is aimed at synthesizing the available evidence regarding effectiveness of various modalities (combinations of LRS tasks) and comparison between each two modalities in terms of gingival display reduction, success rate, stability of the results, patient's satisfaction, and postoperative morbidity. MATERIALS AND METHODS: The electronic databases including PubMed, Scopus, Web of Science Cochrane Library, Google Scholar databases, ClinicalTrials.gov, and WHO International Clinical Trial Registry Platform were searched up to 27th June 2020 regarding lip repositioning surgery. The modalities were defined as the combinations of the following tasks: frenectomy (yes/no), flap thickness (full/partial), and myotomy (yes/no). Meta-analyses were performed on gingival display change from baseline to months 3, 6, and 12 in each modalities using Stata (v.16). RESULTS: 38 studies (including three clinical trials, two quasiexperimental studies, seven case series, and 26 case reports) met the criteria for final inclusion. The mean gingival display reduced from baseline to 6 months (WMD = -2.90, 95% CI: -4.85 to -0.95) in the patients undergoing the "frenectomy + full-thickness flap + myotomy" modality. This parameter decreased from baseline to 6 and 12 months, respectively (WMD = -2.68, 95% CI: -3.49 to -1.86; WMD = -2.52, 95% CI: -4.40 to -0.64), in patients undergoing the "frenectomy + partial-thickness flap + without myotomy" modality. In patients who undergone the "without frenectomy + partial-thickness flap + without myotomy" modality, gingival display reduced from baseline to 6 months (WMD = -3.22, 95% CI: -5.61 to -0.84). Almost 83% of patients with modality 1 had satisfaction. CONCLUSIONS: Gingival display within the 6 months after LRS could be reduced with all modalities. Descriptively, the greatest reduction was observed in patients with the modality not including the frenulum.