High-Performance Bioinspired Microspheres for Boosting Dental Adhesion.

Dental adhesives are widely used in daily practice for minimally invasive restorative dentistry but suffer from bond degradation and biofilm attack. Bio-inspired by marine mussels having excellent surface-adhesion capability and high chemical affinity of polydopamine (PDA) to metal ions, herein, experimental zinc (Zn)-containing polydopamine-based adhesive formulation, further being referred to as "Zn-PDA@SiO2 "-incorporated adhesive is proposed as a novel dental adhesive. Different Zn contents (5 and 10 mm) of Zn-PDA@SiO2 are prepared. Considering the synergistic effect of Zn and PDA, Zn-PDA@SiO2 not only presents excellent antibacterial potential and notably inhibits enzymatic activity (soluble and matrix-bound proteases), but also exhibits superior biocompatibility and biosafety in vitro/vivo. The long-term bond stability is substantially improved by adding 5 wt% 5 mm Zn-PDA@SiO2 to the primer. The aged bond strength of the experimentally formulated dental adhesives applied in self-etch (SE) bonding mode is 1.9 times higher than that of the SE gold-standard adhesive. Molecular dynamics calculations indicate the stable formation of covalent bonds, Zn-assisted coordinative bonds, and hydrogen bonds between PDA and collagen. Overall, this bioinspired dental adhesive provides an avenue technology for innovative biomedical applications and has already revealed promising perspectives for dental restorative dentistry.

Assessment of knowledge, attitude, and practice on early childhood caries among dental undergraduates and residents in China.

BACKGROUND: Early childhood caries (ECC) causes severe, widespread oral health issues in children. Dental undergraduates and residents are expected to have a solid understanding of ECC for children's oral health promotion. This study aimed to evaluate the knowledge, attitude, and clinical practice on ECC among dental undergraduates and residents in China. METHODS: A 23-item electronic questionnaire was distributed to 598 dental undergraduates (4th- and 5th-year undergraduates) and residents (1st-, 2nd-, and 3rd-year residents) at the School of Stomatology, Wuhan University, China (in April-May 2023). SPSS Statistics was used to analyze the data using the Chi-square test at a significance level of 0.05. RESULTS: A total of 422 questionnaires were completed by participants (recovery rate: 70.6%) from various academic levels. Around 77.3% of participants had heard of ECC (mainly from textbooks), and only 27.5% considered themselves familiar with it. Residents (79.8%) had higher risk awareness of ECC on children's overall health than undergraduates (58.3%) (p < 0.05), but only 54.0% of participants correctly defined ECC. Most participants had a positive understanding of ECC's pathogenic factors and preventive measures, including feeding patterns (71.6%), fluoride application (93.4%), and teeth cleaning (93.1%). Furthermore, only 50.2% of participants encountered ECC cases in clinic. CONCLUSIONS: Despite having a suboptimal level of ECC-related knowledge and practice, dental undergraduates and residents in China demonstrated a more positive attitude towards its etiology-based prevention. Strengthening ECC education, guidance, and practice may enable them to gain a better understanding of ECC learning, which would benefit children's oral health.

Effectiveness of different intrusion modes of maxillary anterior teeth with mini-implants in clear aligner treatment: a three-dimensional finite element analysis.

BACKGROUND: The intrusion of maxillary anterior teeth is often required and there are various intrusion modes with mini-implants in clear aligner treatment. The objective of this study was to evaluate the effectiveness of maxillary anterior teeth intrusion with different intrusion modes, aiming to provide references for precise and safe intrusion movements in clinical practice. METHODS: Cone-beam computed tomography and intraoral optical scanning data of a patient were collected. Finite element models of the maxilla, maxillary dentition, periodontal ligaments (PDLs), clear aligner (CA), attachments, and mini-implants were established. Different intrusion modes of the maxillary anterior teeth were simulated by changing the mini-implant site (between central incisors, between central and lateral incisor, between lateral incisor and canine), loading site (between central incisors, on central incisor, between central and lateral incisor, between lateral incisor and canine), and loading mode (labial loading and labiolingual loading). Ten conditions were generated and intrusive forces of 100 g were applied totally. Then displacement tendency of the maxillary anterior teeth and CA, and stress of the PDLs were analyzed. RESULTS: For the central incisor under condition L14 and for the canine under conditions L11, L13, L23, and L33, the intrusion amount was negative. Under other conditions, the intrusion amount was positive. The labiolingual angulation of maxillary anterior teeth exhibited positive changes under all conditions, with greater changes under linguoincisal loading. The mesiodistal angulation of canine exhibited positive changes under labial loading, while negative changes under linguoincisal loading except for condition L14. CONCLUSIONS: The intrusion amount, labiolingual and mesiodistal angulations of the maxillary anterior teeth were affected by the mini-implant site, loading site, and loading mode. Labial and linguoincisal loading may have opposite effects on the intrusion amount of maxillary anterior teeth and the mesiodistal angulation of canine. The labiolingual angulation of the maxillary incisors would increase under all intrusion modes, with greater increases under linguoincisal loading.

Quantitation of Atmospheric Suspended Polystyrene Nanoplastics by Active Sampling Prior to Pyrolysis-Gas Chromatography-Mass Spectrometry.

Plastic has been demonstrated to release nanoplastics (NPs) into the atmosphere under sunlight irradiation, posing a continuous health risk to the respiratory system. However, due to lack of reliable quantification methods, the occurrence and distribution of NPs in the atmosphere remain unclear. Polystyrene (PS) micro- and nanoplastics (MNPs) represent a crucial component of atmospheric MNPs. In this study, we proposed a simple and robust method for determining the concentration of atmospheric PS NPs using pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS). Following active sampling, the filter membrane is directly ground and introduced into the Py-GC/MS system to quantify PS NPs. The proposed method demonstrates excellent reproducibility and high sensitivity, with a detection limit as low as down to 15 pg/m3 for PS NPs. By using this method, the occurrence of PS NPs in both indoor and outdoor atmospheres has been confirmed. Furthermore, the results showed that the abundance of outdoor PS NPs was significantly higher than that of indoor samples, and there was no significant difference in NP vertical distribution within a height of 28.6 m. This method can be applied for the routine monitoring of atmospheric PS NPs and for evaluating their risk to human health.

Secondary in-the-bag Intraocular Lens Implantation in Aphakic Eyes After Vitrectomy and Silicone Oil Tamponade for Rhegmatogenous Retinal Detachment.

PURPOSE: To describe a novel technique for capsular bag reopening and secondary in-the-bag intraocular lens (IOL) implantation in aphakic eyes after vitreoretinal surgery and intraocular tamponade. METHODS: We enrolled 14 eyes of 14 patients who underwent primary vitreoretinal surgery with silicone oil tamponade for rhegmatogenous retinal detachment between September 2018 and September 2019. The novel technique was used for capsular bag reopening and foldable single-piece IOL implantation. Patients were followed up at least 24 weeks with routine ophthalmic examinations, corneal endothelial cell density, and IOL tilt and decentration measurement. RESULTS: The procedure was successfully completed in 13 cases; in one case, because of posterior capsular tear, the IOL was implanted with ciliary sulcus fixation. After a mean follow-up of 48.8 ± 14.8 (range, 24.9-65.9) weeks, the best-corrected visual acuity (before 20/76 Snellen, 0.63 ± 0.23 logarithm of the minimum angle of resolution equivalent and after 20/35 Snellen, 0.32 ± 0.32 logarithm of the minimum angle of resolution equivalent; P = 0.001) and spherical equivalent (before +8.22 ± 4.08, after -2.39 ± 1.77 D; P < 0.001) improved, intraocular pressure (before 15.93 ± 4.40, after 16.25 ± 4.25 mmHg; P = 0.743) remained unchanged. The IOL was well centered with a mean horizontal and vertical tilt of 0.5070 ± 0.3319° and 0.4652 ± 0.3465°, respectively, and decentration of 0.1705 ± 0.1334 mm and 0.1712 ± 0.1576 mm, respectively. CONCLUSION: With this technique, capsular bag reopening and secondary in-the-bag IOL implantation could be achieved in most cases with satisfactory visual outcome and IOL position.

Evaluation of palate-related factors of the effectiveness of microimplant-assisted rapid palatal expansion in late adolescents and adults.

INTRODUCTION: This study investigated the factors of the effectiveness of microimplant-assisted rapid palatal expansion (MARPE) in late adolescents and adults, such as age, midpalatal suture maturation (MPSM) stage, palate length (PL), palatal index (PI), and midpalatal bone thickness (MBT), and at each microimplant position, the palate bone thickness (PBT), the nasal cortical bone thickness (CoTN), the cancellous bone thickness (CaT), and the palate cortical bone thickness (CoTP) were evaluated. METHODS: Cone-beam computed tomography (CBCT) images of 50 patients (mean, 23.30 ± 7.03 years; range, 16-51 years) treated with MARPE were evaluated. Maxillary expansion ratio (MER) was used to assess the MARPE effectiveness and grouped patients into low and high MER groups according to the mean of MER. MER was the ratio of maxillary expansion width to MARPE screw expansion measured in CBCT images. The t-test was used to analyze the differences between the low and high MER groups. The Pearson correlation test was performed to investigate the correlation between MER and age, MPSM stage, PL, PI, MBT, PBT, CoTN, CaT, and CoTP. RESULTS: Age, MPSM stage, and MBT in regions 18 mm and 21 mm behind the incisor foramen correlated negatively with MER ([Formula: see text], - 0.390, - 0.386, and - 0.335, respectively, all [Formula: see text]), whereas PBT and CoTN of anterior microimplant positions correlated positively with MER ([Formula: see text] and 0.418, respectively, all [Formula: see text]). No correlation was observed between other variables and MER. CONCLUSIONS: MARPE effectiveness decreased as age and midpalatal suture maturation stage increased, respectively. Thinner midpalatal suture bone in regions 18 mm and 21 mm behind the incisor foramen, thicker palate bone, and nasal cortical bone of anterior microimplant positions were related to more effective MARPE. CLINICAL RELEVANCE: In patients with older chronological age and later MPSM stages, MARPE effectiveness might be unsatisfactory. Clinicians should carefully evaluate the palate bone thickness before MARPE treatment.

Polyurethane Foam Face Masks as a Dosimeter for Quantifying Personal Exposure to Airborne Volatile and Semi-Volatile Organic Compounds.

Airborne volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) are commonly quantitated by collecting the analytes on solid sorbent tubes or passive air samplers, followed by solvent extraction and instrumental analysis, or by grab bag/canister measurements. We report herein a user-friendly sampling method by breathing through polyurethane foam (PUF) face masks to collect airborne VOCs and SVOCs for chemical analysis. Specifically, dibasic esters, phthalate esters, polycyclic aromatic hydrocarbons, linalool, and nicotine trapped on PUF masks were quantitated by gas chromatography-mass spectrometry analysis as model VOCs and SVOCs. Results showed that the amount of these model VOCs and SVOCs trapped on PUF masks is proportional to the exposure duration. After cross-validation by parallel sampling using XAD-2 packed sorbent tubes, the method was used to quantitate VOCs and SVOCs in a variety of indoor and outdoor environments with varying air concentrations of analytes, temperature, humidity, and wind speed. Because air pollution is considered a major cause of many human diseases and premature deaths and the developed PUF mask sampling method showed high trapping efficiencies for both VOCs and SVOCs, it is believed that the developed sampling method will find wide application in assessing air pollution-associated disease risks with possible extension to more classes of VOCs and SVOCs when coupled with suitable instrumental detection methods.

Effects of titanium dioxide microparticles and nanoparticles on cytoskeletal organization, cell adhesion, migration, and proliferation in human gingival fibroblasts in the presence of lipopolysaccharide.

BACKGROUND AND OBJECTIVE: Titanium wear particles may participate in the etiology of peri-implantitis. However, the influence of titanium wear particles on biological behavior of human gingival fibroblasts (HGFs) in the presence of LPS is still not clear. The present study demonstrated the effects of titanium dioxide micro- and nanoparticles (TiO2  MPs and NPs) on HGF cell viability, cytoskeletal organization, adhesion, migration, and proliferation in vitro, and LPS was used to mimic the in vivo condition. METHODS: Primary HGFs were treated with TiO2 MPs (primary particle size <5 µm, 0.1 mg/ml) and NPs (primary particle size <100 nm, 0.1 mg/ml) with or without 1 µg/ml LPS. The effects of TiO2 MPs and NPs on HGFs cell viability was measured by CCK-8 assay. The proliferation of HGF was detected by Ki67 nuclear staining. The confocal laser scanning microscope (CLSM) was used to detect the internalization of TiO2 MPs and NPs in HGFs as well as the arrangement of F-actin, vinculin, and vimentin organization. Wound healing assay and transwell assay were performed to measure the migration of HGFs induced by TiO2 MPs and NPs. Cell adhesion was measured using fibronectin-coated plates. The relative mRNA and protein expression of adhesion relative protein such as focal adhesion kinase (FAK), fibronectin (FN), and type I collagen (COL1) were measured using quantitative RT-PCR and western blot analysis. One-way analysis of variance (ANOVA) and Student's t-test were used to analyze the statistical significance, and p < .05 was considered statistically significant. RESULTS: TiO2 NPs significantly inhibited HGF cell viability, proliferation, and migration compared with TiO2 MPs group and control group. Compared with control group (2.64 ± 0.09), the mean absorbance of the cells in 1 mg/ml TiO2 MPs group and 0.25 mg/ml TiO2 NPs group were significantly decreased to 1.93 ± 0.33 (p < .05) and 2.22 ± 0.18 (p < .01), respectively. The cytoskeleton disruption was found in TiO2 NPs group. The mRNA and protein expression were significantly downregulated by TiO2 NPs. Furthermore, both TiO2 NPs and MPs induced more adverse effects on HGFs in the presence of LPS. CONCLUSION: Our results indicate that TiO2 NPs but not TiO2 MPs significantly disrupt the cytoskeletal organization and inhibited cell adhesion, migration, and proliferation of HGFs. However, in the presence of LPS, TiO2 MPs, and TiO2 NPs enhance these negative effects in HGFs. Titanium wear particles are probably involved in the initiation and progression of peri-implant diseases.

Change in axial length after vitrectomy with silicone oil tamponade for rhegmatogenous retinal detachment.

BACKGROUND: We aimed to explore the changes in the axial length and related factors after vitrectomy for rhegmatogenous retinal detachment (RRD). METHODS: This study retrospectively evaluated patients who underwent vitrectomy with silicone oil (SO) tamponade for RRD and subsequent silicone oil removal at our clinic. Using a Zeiss IOLMaster 700, axial length was measured before vitrectomy for RRD and SO removal. The change in axial length (ΔAL) was calculated, and multivariate binary logistic regression analysis was performed to investigate the potential correlation between ΔAL and clinical factors, such as preoperative hypotony, extreme myopia, age, macular involvement, choroidal detachment, operation duration, and operation history. RESULTS: In total, 213 eyes from 213 patients were included. The mean axial length changed significantly pre- and post-vitrectomy (25.98 ± 2.87 mm and 26.25 ± 3.07 mm, respectively, P < 0.001); the mean ΔAL was 0.37 ± 0.62 mm. Multivariate binary logistic regression analysis showed that preoperative hypotony and extreme myopia were significantly correlated with the ΔAL (P = 0.001 and P = 0.001, respectively). A higher proportion of hypotonic eyes had ΔAL ≥ 0.3 mm (33/76 in hypotony eyes and 32/137 in others; P = 0.003). A higher proportion of extremely myopic eyes also had a ΔAL ≥ 0.3 mm (23/46 in extremely myopic eyes and 42/167 in others; P = 0.002). CONCLUSION: For patients with RRD and cataracts, as axial length changed significantly after vitrectomy in those with hypotony or extreme myopia, secondary lOL implantation should be considered.

Polyurethane-Based Face Mask as a Sampling Device for Environmental Tobacco Smoke.

Environmental tobacco smoke (ETS), also known as secondhand smoking, contains human carcinogens associated with the development of many human diseases, including stroke, heart disease, leukemia, and lung cancer. Due to these adverse health effects, a sensitive and selective method is crucial for assessing the health impacts of ETS. While current methods to evaluate ETS exposure are either invasive or nonspecific and insensitive, in this study, we assessed the use of polyurethane foam face masks as a sampling medium to collect tobacco smoke-specific nicotine and nitrosamines for estimating personal exposure to ETS. This method was used in conjunction with tandem mass spectrometry coupled with isotope-dilution detection. After validation by comparison with the National Institute for Occupational Safety and Health standard method (NIOSH 2551) for nicotine, we quantitated ETS exposure in indoor and outdoor environments. The analysis shows the applicability of the method for monitoring nicotine down to ∼0.20 mg/m3 near an outdoor smoking hotspot and up to ∼5.2 mg/m3 in a room with burning cigarettes, all with a time resolution as short as 5 min. In comparison with the NIOSH method, the newly developed method is convenient, inexpensive, and does not require a personal sampling pump, thus can facilitate large-scale ETS exposure monitoring.

Sequential Isolation of Microplastics and Nanoplastics in Environmental Waters by Membrane Filtration, Followed by Cloud-Point Extraction.

Respective detection of microplastics (MPs) and nanoplastics (NPs) is of great importance for their different environmental behaviors and toxicities. Using spherical polystyrene (PS) and poly(methyl methacrylate) (PMMA) plastics as models, the efficiency for sequential isolation of MPs and NPs by membrane filtration and cloud-point extraction was evaluated. After filtering through a glass membrane (1 µm pore size), over 90.7% of MPs were trapped on the membrane, whereas above 93.0% of NPs remained in the filtrate. The collected MPs together with the glass membrane were frozen in liquid nitrogen, ground, and suspended in water (1 mL) and subjected to pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) determination. The NPs in the filtrate were concentrated by cloud-point extraction, heated at 190 °C to degrade the extractant, and then determined by Py-GC/MS. For MPs and NPs spiked in pure water, the method detection limits are in the range of 0.05-1.9 µg/L. The proposed method is applied to analyze four real water samples, with the detection of 1.6-7.6 µg/L PS MPs and 0.6 µg/L PMMA MPs in three samples, and spiked recoveries of 75.0-102% for MPs and 67.8-87.2% for NPs. Our method offers a novel sample pretreatment approach for the respective determination of MPs and NPs.

Immobilization of Ionic Liquids with a New Cellulose Ester Containing Imidazolium Cation for High-Performance CO2 Separation Membranes.

CO2 gas separation is of significant importance to protect the environment and utilize the carbon resource. In this work, two kinds of new cellulose esters containing imidazolium cation, cellulose acetate (CA) 1-butyl-3-methylimidazolium chloride and CA 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide (CA-BmimTf2 N), are designed and synthesized. The resultant cationized cellulose esters effectively lock various ionic liquids (ILs) via electrostatic interactions. Due to the strong attraction interactions, the obtained cellulose ester/ILs composite membranes are uniform, smooth, and highly transparent. Moreover, the added ILs with a long alkyl chain in the cation and a bis(trifluoromethane sulfonyl)imide anion remarkably improve the CO2 permeability of the cellulose ester/ILs membranes, because of the dramatic increase of the CO2 diffusion rate. The CA-BmimTf2 N/C10 mimTf2 N membranes exhibit the highest CO2 permeability, which is 3800% higher than that of CA membrane and 1700% higher than that of CA-BmimTf2 N membrane. More importantly, the CA-BmimTf2 N/C10 mimTf2 N membranes have good mechanical properties and thermal stability. Such high-performance CO2 separation membranes with high CO2 permeability, high transparency, and good mechanical property have a huge potential in the practical utilization for gas separation.

Effect of universal adhesive and silane pretreatment on bond durability of metal brackets to dental glass ceramics.

This study aimed to investigate the effect of universal adhesive and silane pretreatment on the bond durability of metal brackets to dental glass ceramics. Eighty lithium disilicate glass ceramic specimens were randomly assigned to one of four groups (n = 20) defined by the pretreatment and adhesive used: (i) Adper Single Bond 2; (ii) silane + Adper Single Bond 2; (iii) Single Bond Universal; and (iv) silane +Single Bond Universal. Maxillary central incisor metal brackets were bonded on the ceramic surfaces with resin composite. A shear bond strength test was conducted after 24 h of water storage and after 10,000 thermocycles. Adhesive remnant index scoring and field-emission scanning electron microscopy were performed to determine adhesives remaining on the ceramic surfaces and the ceramic ultrastructure following bracket debonding, respectively. After 10,000 thermocycles, specimens treated with Single Bond Universal preserved an appropriate bond strength between brackets and glass ceramics and showed minimum ceramic surface damage following bracket debonding, which was not the case in the other three groups. The application of a silane-containing universal adhesive without silane pretreatment achieves adequate durability of the bond of metal brackets to dental glass ceramics and allows safe debonding, which may aid in optimizing the effectiveness for orthodontic treatment.

Matrix stiffness modulates the differentiation of neural crest stem cells in vivo.

Stem cells are often transplanted with scaffolds for tissue regeneration; however, how the mechanical property of a scaffold modulates stem cell fate in vivo is not well understood. Here we investigated how matrix stiffness modulates stem cell differentiation in a model of vascular graft transplantation. Multipotent neural crest stem cells (NCSCs) were differentiated from induced pluripotent stem cells, embedded in the hydrogel on the outer surface of nanofibrous polymer grafts, and implanted into rat carotid arteries by anastomosis. After 3 months, NCSCs differentiated into smooth muscle cells (SMCs) near the outer surface of the polymer grafts; in contrast, NCSCs differentiated into glial cells in the most part of the hydrogel. Atomic force microscopy demonstrated a stiffer matrix near the polymer surface but much lower stiffness away from the polymer graft. Consistently, in vitro studies confirmed that stiff surface induced SMC genes whereas soft surface induced glial genes. These results suggest that the scaffold's mechanical properties play an important role in directing stem cell differentiation in vivo, which has important implications in biomaterials design for stem cell delivery and tissue engineering.

Incorporation of drug efflux inhibitor and chemotherapeutic agent into an inorganic/organic platform for the effective treatment of multidrug resistant breast cancer.

BACKGROUND: Multidrug resistance (MDR) is a pressing obstacle in clinical chemotherapy for breast cancer. Based on the fact that the drug efflux is an important factor in MDR, we designed a codelivery system to guide the drug efflux inhibitor verapamil (VRP) and the chemotherapeutic agent novantrone (NVT) synergistically into breast cancer cells to reverse MDR. RESULTS: This co-delivery system consists of following components: the active targeting peptide RGD, an inorganic calcium phosphate (CaP) shell and an organic inner core. VRP and NVT were loaded into CaP shell and phosphatidylserine polyethylene glycol (PS-PEG) core of nanoparticles (NPs) separately to obtain NVT- and VRP-loaded NPs (NV@CaP-RGD). These codelivered NPs allowed VRP to prevent the efflux of NVT from breast cancer cells by competitively combining with drug efflux pumps. Additionally, NV@CaP-RGD was effectively internalized into breast cancer cells by precise delivery through the effects of the active targeting peptides RGD and EPR. The pH-triggered profile of CaP was also able to assist the NPs to successfully escape from lysosomes, leading to a greatly increased effective intracellular drug concentration. CONCLUSION: The concurrent administration of VRP and NVT by organic/inorganic NPs is a promising therapeutic approach to reverse MDR in breast cancer.

Self-Powered Smart Insole for Monitoring Human Gait Signals.

With the rapid development of low-power consumption wireless sensors and wearable electronics, harvesting energy from human motion to enable self-powered sensing is becoming desirable. Herein, a pair of smart insoles integrated with piezoelectric poly(vinylidene fluoride) (PVDF) nanogenerators (NGs) are fabricated to simultaneously harvest energy from human motion and monitor human gait signals. Multi-target magnetron sputtering technology is applied to form the aluminum electrode layers on the surface of the PVDF film and the self-powered insoles are fabricated through advanced 3D seamless flat-bed knitting technology. Output responses of the NGs are measured at different motion speeds and a maximum value of 41 V is obtained, corresponding to an output power of 168.1 µW. By connecting one NG with an external circuit, the influence of external resistance, capacitor, and motion speed on the charging characteristics of the system is systematically investigated. To demonstrate the potential of the smart insoles for monitoring human gait signals, two subjects were asked to walk on a treadmill at different speeds or with a limp. The results show that one can clearly distinguish walking with a limp from regular slow, normal, and fast walking states by using multiscale entropy analysis of the stride intervals.

Finite element analysis of the effect of power arm locations on tooth movement in extraction space closure with miniscrew anchorage in customized lingual orthodontic treatment.

INTRODUCTION: More patients are choosing customized orthodontic appliances because of their excellent esthetics. It is essential that clinicians understand the biomechanics of the tooth movement tendency in customized lingual orthodontics. This study aimed to evaluate the tooth movement tendency during space closure in maxillary anterior teeth with the use of miniscrew anchorage in customized lingual orthodontics with various power arm locations. METHODS: Three-dimensional finite element models of the maxilla were created with miniscrews and power arms; the positions were varied to change the force directions. A retraction force (1.5 N) was applied from the top of the miniscrews to the selected points on the power arm, and the initial displacements of the reference nodes of the maxillary teeth were analyzed. RESULTS: After applying force in different directions, power arms located at the distal side of the canines led to larger initial lingual crown tipping and occlusal crown extrusion of the maxillary incisors compared with power arms located at the midpoint between the lateral incisors and canines, and caused a decreasing trend of the intercanine width. CONCLUSIONS: In customized lingual orthodontic treatment, power arms located at the distal side of the canines are unfavorable for anterior teeth torque control and intercanine width control. Power arms located at the midpoint between the lateral incisors and canines can get better torque control, but still cannot achieve excepted torque without extra torque control methods, no matter whether its force application point is higher than, lower than, or equal to the level of the top of the miniscrews.

Fixation of carbon dioxide by a hydrogen-oxidizing bacterium for value-added products.

With rapid technology progress and cost reduction, clean hydrogen from water electrolysis driven by renewable powers becomes a potential feedstock for CO2 fixation by hydrogen-oxidizing bacteria. Cupriavidus necator (formally Ralstonia eutropha), a representative member of the lithoautotrophic prokaryotes, is a promising producer of polyhydroxyalkanoates and single cell proteins. This paper reviews the fundamental properties of the hydrogen-oxidizing bacterium, the metabolic activities under limitation of individual gases and nutrients, and the value-added products from CO2, including the products with large potential markets. Gas fermentation and bioreactor safety are discussed for achieving high cell density and high productivity of desired products under chemolithotrophic conditions. The review also updates the recent research activities in metabolic engineering of C. necator to produce novel metabolites from CO2.

Polyvinylidene Fluoride Micropore Membranes as Solid-Phase Extraction Disk for Preconcentration of Nanoparticulate Silver in Environmental Waters.

Efficient separation and preconcentration of trace nanoparticulate silver (NAg) from large-volume environmental waters is a prerequisite for reliable analysis and therefore understanding the environmental processes of silver nanoparticles (AgNPs). Herein, we report the novel use of polyvinylidene fluoride (PVDF) filter membrane for disk-based solid phase extraction (SPE) of NAg in 1 L of water samples with the disk-based SPE system, which consists of a syringe pump and a syringe filter holder to embed the filter membrane. While the PVDF membrane can selectively adsorb NAg in the presence of Ag+, aqueous solution of 2% (m/v) FL-70 is found to efficiently elute NAg. Analysis of NAg is performed following optimization of filter membrane and elution conditions with an enrichment factor of 1000. Additionally, transmission electron microscopy (TEM), UV-vis spectroscopy, and size-exclusion chromatography coupled with ICP-MS (SEC-ICP-MS) analysis showed that the extraction gives rise to no change in NAg size or shape, making this method attractive for practical applications. Furthermore, feasibility of the protocol is verified by applying it to extract NAg in four real waters with recoveries of 62.2-80.2% at 0.056-0.58 µg/L spiked levels. This work will facilitate robust studies of trace NAg transformation and their hazard assessments in the environment.

Effects of Chlorhexidine-Encapsulated Mesoporous Silica Nanoparticles on the Anti-Biofilm and Mechanical Properties of Glass Ionomer Cement.

One of the primary causes for the failure of glass ionomer cement (GIC) is secondary caries. To enhance the anti-microbial performance of GIC without affecting its mechanical properties, chlorhexidine (CHX) was encapsulated in expanded-pore mesoporous silica nanoparticles (pMSN) to synthesize CHX@pMSN. CHX@pMSN was added at three mass fractions (1%, 5%, and 10% (w/w)) to GIC powder as the experimental groups. Pure GIC was set as the control group. The mechanical and anti-biofilm properties of GIC from each group were tested. The results demonstrated that CHX was successfully encapsulated on/into pMSN, and the encapsulating efficiency of CHX was 44.62% in CHX@pMSN. The anti-biofilm ability was significantly enhanced in all experimental groups (p < 0.001) compared with that in the control group. CHX was continuously released, and anti-biofilm ability was maintained up to 30 days. In addition, the mechanical properties (compressive strength, surface hardness, elastic modulus, water sorption, and solubility) of 1% (w/w) group were maintained compared with those in the control group (p > 0.05). In conclusion, adding 1% (w/w) CHX@pMSN to GIC led to conspicuous anti-biofilm ability and had no adverse effect on the mechanical properties of this restorative material. This study proposes a new strategy for preventing secondary caries by using CHX@pMSN-modified GIC.