The class II KNOX transcription factors KNAT3 and KNAT7 synergistically regulate monolignol biosynthesis in Arabidopsis.

The function of the transcription factor KNOTTED ARABIDOPSIS THALIANA7 (KNAT7) is still unclear since it appears to be either a negative or a positive regulator for secondary cell wall deposition with its loss-of-function mutant displaying thicker interfascicular and xylary fiber cell walls but thinner vessel cell walls in inflorescence stems. To explore the exact function of KNAT7, class II KNOTTED1-LIKE HOMEOBOX (KNOX II) genes in Arabidopsis including KNAT3, KNAT4, and KNAT5 were studied together. By chimeric repressor technology, we found that both KNAT3 and KNAT7 repressors exhibited a similar dwarf phenotype. Both KNAT3 and KNAT7 genes were expressed in the inflorescence stems and the knat3 knat7 double mutant exhibited a dwarf phenotype similar to the repressor lines. A stem cross-section of knat3 knat7 displayed an enhanced irregular xylem phenotype as compared with the single mutants, and its cell wall thickness in xylem vessels and interfascicular fibers was significantly reduced. Analysis of cell wall chemical composition revealed that syringyl lignin was significantly decreased while guaiacyl lignin was increased in the knat3 knat7 double mutant. Coincidently, the knat3 knat7 transcriptome showed that most lignin pathway genes were activated, whereas the syringyl lignin-related gene Ferulate 5-Hydroxylase (F5H) was down-regulated. Protein interaction analysis revealed that KNAT3 and KNAT7 can form a heterodimer, and KNAT3, but not KNAT7, can interact with the key secondary cell wall formation transcription factors NST1/2, which suggests that the KNAT3-NST1/2 heterodimer complex regulates F5H to promote syringyl lignin synthesis. These results indicate that KNAT3 and KNAT7 synergistically work together to promote secondary cell wall biosynthesis.

Identification of 4-O-5-Units in Softwood Lignins via Definitive Lignin Models and NMR.

Lignins are complex and heterogeneous natural polymers in which the major units are characterized by certain prominent interunit linkages. Previous attempts to identify and quantify 4-O-5-linked units in softwood lignins by NMR were not successful. In this work, various lignin model compounds, including the tetramers formed by the 4-O-5-coupling of ß-O-4-, ß-ß-, and ß-5-model dimers, were synthesized. Such compounds are better able to model the corresponding structures in lignins than those used previously. 4-O-5-Linked structures could be clearly observed and identified in real softwood lignin samples by comparison of their 2D HSQC NMR spectra with those from the model compounds. When comparing NMR data of phenol-acetylated versus phenol-etherified model compounds with those of acetylated lignins, it was apparent that most of the 4-O-5-linked structures in softwood lignins are present as free-phenolic end units.

Low Temperature Soda-Oxygen Pulping of Bagasse.

Wood shortages, environmental pollution and high energy consumption remain major obstacles hindering the development of today's pulp and paper industry. Energy-saving and environmental friendly pulping processes are still needed, especially for non-woody materials. In this study, soda-oxygen pulping of bagasse was investigated and a successful soda-oxygen pulping process for bagasse at 100 °C was established. The pulping parameters of choice were under active alkali charge of 23%, maximum cooking temperature 100 °C, time hold at maximum temperature 180 min, initial pressure of oxygen 0.6 MPa, MgSO4 charge 0.5%, and de-pithed bagasse consistency 12%. Properties of the resultant pulp were screened yield 60.9%, Kappa number 14, viscosity 766 dm³/kg, and brightness 63.7% ISO. Similar pulps were also obtained at 110 °C or 105 °C with a cooking time of 90 min. Compared with pulps obtained at higher temperatures (115-125 °C), this pulp had higher screened yield, brightness, and acceptable viscosity, while the delignification degree was moderate. These results indicated that soda-oxygen pulping at 100 °C, the lowest cooking temperature reported so far for soda-oxygen pulping, is a suitable process for making chemical pulp from bagasse. Pulping at lower temperature and using oxygen make it an environmental friendly and energy-saving pulping process.

Bio-inspired synthesis of amino acids modified sulfated cellulose nanofibrils into multivalent viral inhibitors via the Mannich reaction.

Virus cross-infection via surfaces poses a serious threat to public health. Inspired by natural sulfated polysaccharides and antiviral peptides, we prepared multivalent virus blocking nanomaterials by introducing amino acids to sulfated cellulose nanofibrils (SCNFs) via the Mannich reaction. The antiviral activity of the resulting amino acid-modified sulfated nanocellulose was significantly improved. Specifically, 1 h treatment with arginine modified SCNFs at a concentration of 0.1 g/mL led to a complete inactivation of the phage-X174 (reduction by more than three orders of magnitude). Atomic force microscope showed that amino acid-modified sulfated nanofibrils can bind phage-X174 to form linear clusters, thus preventing the virus from infecting the host. When we coated wrapping paper and the inside of a face-mask with our amino acid-modified SCNFs, phage-X174 was completely deactivated on the coated surfaces, demonstrating the potential of our approach for use in the packaging and personal protective equipment industries. This work provides an environmentally friendly and cost-efficient approach to fabricating multivalent nanomaterials for antiviral applications.

Nanolignin-based high internal phase emulsions for efficient protection of curcumin against UV degradation.

As an emulsifier, lignin exhibits excellent UV resistance on drug-loaded emulsion systems for drug delivery. However, due to the structural variation and complexity of lignins from various origins, their UV shielding performance varies with the techniques for lignin extraction, which impacts properties and the protection efficiency of lignin-based HIPEs (high internal phase emulsions). In this work, lignin nanoparticles, prepared from three lignin preparations of Eucalyptus, were used in HIPEs delivery systems to protect curcumin from degradation by UV radiation. Structures of the lignin preparations were characterized using 2D HSQC (heteronuclear single-quantum coherence) NMR (nuclear magnetic resonance), 31P NMR, and GPC (gel permeation chromatography). The residual curcumin level after 36 h UV exposure in the nanolignin-based HIPEs was over 72 %, much higher than that (< 10 % after 24 h UV exposure) in the oil phase without lignin, indicating that the nanolignin-based HIPEs with enhanced UV shielding ability protect curcumin better. Of the three lignin preparations, AL (alkali lignin), with the lowest molecular weight, highest contents of phenolic hydroxyl and carboxyl groups, and highest S/G ratio, displayed the best anti-UV radiation ability and the most uniform nanoparticle size.

Synthetic Lignin-Derived Therapeutic Nano Reagent as Intestinal pH-Sensitive Drug Carriers Capable of Bypassing the Gastric Acid Environment for Colitis Treatment.

Oral drug delivery is a common route for management of inflammatory bowel disease (IBD) but suffers from low bioavailability and systemic side effects during passage through the alimentary canal. Here, we present a therapeutic nano reagent of a ferulic acid-derived lignin nanoparticle (FALNP). We showed that FALNP with favorable antioxidant activity can regulate IBD. More importantly, the intestinal pH-responsive degradability of FALNP allows it to withstand the harsh gastric acid environment, bypass physiological barriers, and target the intestine for gastrointestinal delivery. In vivo experiments showed that oral administration of FALNP markedly relieved pathological symptoms in a mouse model of acute colitis by reducing oxidative stress and regulating the gut microbiome. By integrating anti-inflammatory medicine, FALNP also can be used as a bioactive carrier to exert a potent synergistic therapeutic effect. In addition to colitis, FALNP can be readily adaptable for use as a carrier platform for therapy of many other intestinal diseases.

CRISPR/Cas9 mutated p-coumaroyl shikimate 3'-hydroxylase 3 gene in Populus tomentosa reveals lignin functioning on supporting tree upright.

The lignin plays one of the most important roles in plant secondary metabolism. However, it is still unclear how lignin can contribute to the impressive height of wood growth. In this study, C3'H, a rate-limiting enzyme of the lignin pathway, was used as the target gene. C3'H3 was knocked out by CRISPR/Cas9 in Populus tomentosa. Compared with wild-type popular trees, c3'h3 mutants exhibited dwarf phenotypes, collapsed xylem vessels, weakened phloem thickening, decreased hydraulic conductivity and photosynthetic efficiency, and reduced auxin content, except for reduced total lignin content and significantly increased H-subunit lignin. In the c3'h3 mutant, the flavonoid biosynthesis genes CHS, CHI, F3H, DFR, ANR, and LAR were upregulated, and flavonoid metabolite accumulations were detected, indicating that decreasing the lignin biosynthesis pathway enhanced flavonoid metabolic flux. Furthermore, flavonoid metabolites, such as naringenin and hesperetin, were largely increased, while higher hesperetin content suppressed plant cell division. Thus, studying the c3'h3 mutant allows us to deduce that lignin deficiency suppresses tree growth and leads to the dwarf phenotype due to collapsed xylem and thickened phloem, limiting material exchanges and transport.

Synthesis and characterization of new 5-linked pinoresinol lignin models.

Pinoresinol structures, featuring a ß-ß'-linkage between lignin monomer units, are important in softwood lignins and in dicots and monocots, particularly those that are downregulated in syringyl-specific genes. Although readily detected by NMR spectroscopy, pinoresinol structures largely escaped detection by ß-ether-cleaving degradation analyses presumably due to the presence of the linkages at the 5 positions, in 5-5'- or 5-O-4'-structures. In this study, which is aimed at helping better understand 5-linked pinoresinol structures by providing the required data for NMR characterization, new lignin model compounds were synthesized through biomimetic peroxidase-mediated oxidative coupling reactions between pre-formed (free-phenolic) coniferyl alcohol 5-5'- or 5-O-4'-linked dimers and a coniferyl alcohol monomer. It was found that such dimers containing free-phenolic coniferyl alcohol moieties can cross-couple with the coniferyl alcohol producing pinoresinol-containing trimers (and higher oligomers) in addition to other homo- and cross-coupled products. Eight new lignin model compounds were obtained and characterized by NMR spectroscopy, and one tentatively identified cross-coupled ß-O-4'-product was formed from a coniferyl alcohol 5-O-4'-linked dimer. It was demonstrated that the 5-5'- and 5-O-4'-linked pinoresinol structures could be readily differentiated by using heteronuclear multiple-bond correlation (HMBC) NMR spectroscopy. With appropriate modification (etherification or acetylation) to the newly obtained model compounds, it would be possible to identify the 5-5'- or 5-O-4'-linked pinoresinol structures in softwood lignins by 2D HMBC NMR spectroscopic methods. Identification of the cross-coupled dibenzodioxocin from a coniferyl alcohol 5-5'-linked moiety suggested that thioacidolysis or derivatization followed by reductive cleavage (DFRC) could be used to detect and identify whether the coniferyl alcohol itself undergoes 5-5'-cross-linking during lignification.

Facile preparation of lignin-containing cellulose nanofibrils from sugarcane bagasse by mild soda-oxygen pulping.

Lignin-containing cellulose nanofibrils (LCNFs) with tunable lignin contents from sugarcane bagasse were directly prepared by low-temperature soda­oxygen pulping combined with simple mechanical treatment. The residual lignin structure, morphology and physical dimensions of LCNFs, and properties of the relevant cellulose nanopapers (CNPs) were investigated. In situ 2D Heteronuclear Single Quantum Coherence (HSQC) NMR spectra showed ß-O-4 linkages, ferulate, and para-coumarate were well preserved in the LCNFs. Compared with the cellulose nanofibrils (CNFs), LCNFs displayed a more uniform size and narrow diameter distribution. The corresponding CNPs exhibited outstanding mechanical properties (tensile strength reached 152.9 MPa), and excellent combined optical properties both in the UV blocking and visible light transparency. Moreover, the water contact angles (50.0-80.2°) of LCNFs were much higher than that of CNFs (21.7°). Direct preparation of LCNFs under mild condition would unlock the full potential of cellulosic materials and provide enhanced opportunities for cellulose to fabricate multi-functional and high-value materials.

Structural insights into the alkali lignins involving the formation and transformation of arylglycerols and enol ethers.

Soda process is one of the most important pulping processes in paper industry producing large quantities of alkali lignins that can afford plenty of biofuels, aromatic chemicals and materials. However, the structural and size-related heterogeneities and complexities hinder the development in these directions. Herein, we report new insights into the structure of alkali lignin, through investigating the formation and transformation of enol ether and arylglycerol structures that are significant responsible for the structural transformation from native lignin to alkali lignin. Four-type enol ethers composed of G/S units in hardwood alkali lignin were identified by 2D HSQC NMR. A series of alkali lignins prepared by alkali treatment of eucalyptus cellulolytic enzyme lignin under various temperatures were analyzed by 2D HSQC NMR, 31P NMR and gel permeation chromatography (GPC). Upon these analyses and related model compound studies, it was found that the arylglycerols formed from native ß-O-4 linkages tends to be oxidized with the further degradation of aryl ether bonds, and that the enol ether linkages are facile to be hydrolyzed or oxidized in the air. These insights improve the mechanistic understanding for the structural evolution and the diversity of alkali lignins and will aid the development of further lignin valorization strategies.

Structural features of alternative lignin monomers associated with improved digestibility of artificially lignified maize cell walls.

Plant biologists are seeking new approaches for modifying lignin to improve the digestion and utilization of structural polysaccharides in crop cultivars for the production of biofuels, biochemicals, and livestock. To identify promising targets for lignin bioengineering, we artificially lignified maize (Zea mays L.) cell walls with normal monolignols plus 21 structurally diverse alternative monomers to assess their suitability for lignification and for improving fiber digestibility. Lignin formation and structure were assessed by mass balance, Klason lignin, acetyl bromide lignin, gel-state 2D-NMR and thioacidolysis procedures, and digestibility was evaluated with rumen microflora and from glucose production by fungal enzymes following mild acid or base pretreatments. Highly acidic or hydrophilic monomers proved unsuitable for lignin modification because they severely depressed cell wall lignification. By contrast, monomers designed to moderately alter hydrophobicity or introduce cleavable acetal, amide, or ester functionalities into the polymer often readily formed lignin, but most failed to improve digestibility, even after chemical pretreatment. Fortunately, several types of phenylpropanoid derivatives containing multiple ester-linked catechol or pyrogallol units were identified as desirable genetic engineering targets because they readily formed wall-bound polymers and improved digestibility, presumably by blocking cross-linking of lignin to structural polysaccharides and promoting lignin fragmentation during mild acidic and especially alkaline pretreatment.

Structural Characterization of Lignins from Willow Bark and Wood.

Understanding the chemical structure of lignin in willow bark is an indispensable step to design how to separate its fiber bundles. The whole cell wall and enzyme lignin preparations sequentially isolated from ball-milled bark, inner bark, and wood were comparatively investigated by nuclear magnetic resonance (NMR) spectroscopy and three classical degradative methods, i.e., alkaline nitrobenzene oxidation, derivatization followed by reductive cleavage, and analytical thioacidolysis. All results demonstrated that the guaiacyl (G) units were predominant in the willow bark lignin over syringyl (S) and minor p-hydroxyphenyl (H) units. Moreover, the monomer yields and S/G ratio rose progressively from bark to inner bark and wood, indicating that lignin may be more condensed in bark than in other tissues. Additionally, major interunit linkage substructures (ß-aryl ethers, phenylcoumarans, and resinols) together with cinnamyl alcohol end groups were relatively quantitated by two-dimensional NMR spectroscopy. Bark and inner bark were rich in pectins and proteins, which were present in large quantities and also in the enzyme lignin preparations.

Lignin-Derived Thioacidolysis Dimers: Reevaluation, New Products, Authentication, and Quantification.

Lignin structural studies play an essential role both in understanding the development of plant cell walls and for valorizing lignocellulosics as renewable biomaterials. Dimeric products released by selectively cleaving ß-aryl ether linkages between lignin units reflect the distribution of recalcitrant lignin units, but have been neither absolutely defined nor quantitatively determined. Here, 12 guaiacyl-type thioacidolysis dimers were identified and quantified using newly synthesized standards. One product previously attributed to deriving from ß-1-coupled units was established as resulting from ß-5 units, correcting an analytical quandary. Another longstanding dilemma, that no ß-ß dimers were recognized in thioacidolysis products from gymnosperms, was resolved with the discovery of two such authenticated compounds. Individual GC response factors for each standard compound allowed rigorous quantification of dimeric products released from softwood lignins, affording insight into the various interunit-linkage distributions in lignins and thereby guiding the valorization of lignocellulosics.

A thioacidolysis method tailored for higher-throughput quantitative analysis of lignin monomers.

Thioacidolysis is a method used to measure the relative content of lignin monomers bound by ß-O-4 linkages. Current thioacidolysis methods are low-throughput as they require tedious steps for reaction product concentration prior to analysis using standard GC methods. A quantitative thioacidolysis method that is accessible with general laboratory equipment and uses a non-chlorinated organic solvent and is tailored for higher-throughput analysis is reported. The method utilizes lignin arylglycerol monomer standards for calibration, requires 1-2 mg of biomass per assay and has been quantified using fast-GC techniques including a Low Thermal Mass Modular Accelerated Column Heater (LTM MACH). Cumbersome steps, including standard purification, sample concentrating and drying have been eliminated to help aid in consecutive day-to-day analyses needed to sustain a high sample throughput for large screening experiments without the loss of quantitation accuracy. The method reported in this manuscript has been quantitatively validated against a commonly used thioacidolysis method and across two different research sites with three common biomass varieties to represent hardwoods, softwoods, and grasses.

Syntheses of lignin-derived thioacidolysis monomers and their uses as quantitation standards.

Analytical thioacidolysis releases diagnostic monomers from lignins by selectively cleaving alkyl aryl ether bonds. High yielding syntheses of the three thioacidolysis monomers were developed, and the compounds were used as standards for gas chromatography-mass spectrometry (GC-MS) and gas chromatography-flame ionization detector (GC-FID) quantitation of monomers released from lignocellulosics. First, syringyl, guaiacyl, and p-hydroxyphenyl glycerols were synthesized from the corresponding ethyl cinnamates and used as thioacidolysis substrates to prepare the monomers in high yields. These monomers were then used as standard compounds to measure their GC-MS and GC-FID response factors against two internal standards, 4,4'-ethylenebisphenol and tetracosane. For quantitation, it was shown that 4,4'-ethylenebisphenol is the better internal standard for GC-MS, whereas tetracosane remains the choice for GC-FID. When the obtained response factors were applied, the thioacidolysis monomer yields from white spruce, loblolly pine, poplar, bamboo, and sugar cane bagasse were determined by GC-MS. The obtained results were consistent with those reported in the literature.

Homogeneous modification of cellulose in ionic liquid with succinic anhydride using N-bromosuccinimide as a catalyst.

The homogeneous chemical modification of cellulose with succinic anhydride was investigated in a solvent system containing 1-butyl-3-methylimidazolium chloride ionic liquid and dimethylsulfoxide using N-bromosuccinimide (NBS) as a catalyst. The results showed that the degree of substitution of the succinylated cellulosic samples, in the range of 0.24-2.31, noticeably increased as compared with the products without any catalysts, indicating that NBS was a novel efficient catalyst for cellulose succinoylation in ionic liquids. Fourier transform infrared and solid-state cross-polarization/magic angle spinning (13)C NMR spectroscopies also provided evidence of succinoylation reaction. The results indicated that the reaction of hydroxyl groups at C-6, C-2, and C-3 positions in cellulose occurred. The thermal stability of the succinylated cellulose was found to decrease upon chemical modification.