Bridging Flocculation of a Sterically Stabilized Cationic Latex as a Biosensor for the Detection of Microbial DNA after Amplification via PCR.

There is a high demand for rapid, sensitive, and accurate detection methods for pathogens. This paper demonstrates a method of detecting the presence of amplified DNA from a range of pathogens associated with serious infections including Gram-negative bacteria, Gram-positive bacteria, and viruses. DNA is amplified using a polymerase chain reaction (PCR) and consequently detected using a sterically stabilized, cationic polymer latex. The DNA induces flocculation of this cationic latex, which consequently leads to rapid sedimentation and a visible change from a milky-white dispersion to one with a transparent supernatant, presenting a clear visible change, indicating the presence of amplified DNA. Specifically, a number of different pathogens were amplified using conventional or qPCR, including Staphylococcus aureus, Escherichia coli, and Herpes Simplex Virus (HSV-2). This method was demonstrated to detect the presence of bacteria in suspension concentrations greater than 380 CFU mL-1 and diagnose the presence of specific genomes through primer selection, as exemplified using methicillin resistant and methicillin susceptible Staphylococcus aureus. The versatility of this methodology was further demonstrated by showing that false positive results do not occur when a PCR of fungal DNA from C. albicans is conducted using bacterial universal primers.

Quantitative Segmentation Analysis of the Radiological Changes by Using ITK-SNAP: Risk Assessment of the Severity and Recurrence of Medication-related Osteonecrosis of the Jaw.

Background and purpose: Medication-related osteonecrosis of the jaw (MRONJ) severely impairs patients' quality of life and is remarkably refractory to treatment. There are lots of studies about identification of the radiographic features of MRONJ, yet reports about quantitative radiographic analysis for the risk assessment of the severity and recurrence of MRONJ are rarely heard. The aim of this study was to investigate the volumes of osteolytic lesions and radiodensity values of osteosclerotic lesions in MRONJ patients by using ITK-SNAP for severity prediction and prognosis evaluation. Materials and methods: Of 78 MRONJ patients (78 lesions) involved in this retrospective study, 53 were presented as osteolytic lesions and 25 were presented as osteosclerotic changes alone. Comprehensive CBCT images, demographics and clinical data of patients were investigated. The volumetric analysis and radiodensity measurement were performed by ITK-SNAP. SPSS 25.0 were used for statistical analysis. Results: The osteolytic lesion volumes in MRONJ patients receiving intravenous bisphosphonates (P=0.004) and patients without osteoporosis (P=0.027) were significantly large. No significant correlation between the volumes and bisphosphonates duration was found (P=0.094). The radiodensity values of osteosclerotic lesions was significantly correlated with bisphosphonates duration (P=0.040). The surrounding area of post-surgical lesions in MRONJ patients with recurrence showed significantly great radiodensity values (P=0.025). No significant correlation between the radiodensity values and the transformation from osteosclerotic lesions to osteolytic lesions was observed (P=0.507). Conclusion: MRONJ patients receiving intravenous bisphosphonates develop into large volumes of osteolytic lesions more easily. Long-term bisphosphonates duration is possibly related with higher bone density of osteosclerotic lesions, while higher density is not associated with the transformation from osteosclerotic lesions to osteolytic lesions. A rise of bone mineral density nearby post-surgical lesions is probably a predictor for MRONJ recurrence.

A novel surgical protocol for safe and accurate placement of C1 lateral mass screws in patients with atlas assimilation, basilar invagination and atlantoaxial instability: technical details, accuracy assessment and perioperative complications.

PURPOSE: To introduce a novel surgical protocol for safe and accurate placement of C1 lateral mass screws in patients with atlas assimilation, basilar invagination and atlantoaxial instability, and to categorize the screw accuracy and perioperative complications regarding this technique in a large case series. METHODS: Between January 2015 and January 2020, patients who had atlas assimilation, basilar invagination and atlantoaxial instability, and underwent atlantoaxial fixation using C1 lateral mass screws were reviewed. C1 lateral mass screws were placed with a novel surgical protocol following a series key steps, including posterior para-odontoid ligament release, panoramic exposure of the invaginated lateral mass, and diligent protection of the abnormal VA. Screw accuracy and related complications were specifically evaluated. RESULTS: A total of 434 C1 lateral mass screws were placed. Fifteen screws (3.5%) were classified as unacceptable, 54 screws (12.4%) were classified as acceptable, and 365 screws (84.1%) were classified as ideal. Overall, 96.5% of screws were deemed safe. There were no cases of vascular injury or permanent neurological defects. One patient with an unacceptable screw presented with hypoglossal nerve paralysis and recovered after an immediate revision surgery. Thirty-seven patients complained about occipital neuralgia and were successfully managed with medication. CONCLUSION: Placement of C1 lateral mass screws in patients with atlas assimilation, basilar invagination and atlantoaxial instability following this surgical protocol is safe and accurate. Thorough para-odontoid ligamental release, wide exposure of the invaginated lateral mass, and diligent protection of the vertebral artery are critical to maximize the chances of successful screw placement.

Technical feasibility and tissue reaction after silicone-covered biodegradable magnesium stent insertion in the oesophagus: a primary study in vitro and in vivo.

OBJECTIVES: Determine the feasibility of and tissue response to biodegradable magnesium-silicone stent insertion into the oesophagus of rabbits. METHODS: Mechanical compression-recovery and degradation behaviours of the stents were investigated in vitro. Thirty rabbits were randomly divided into a magnesium-silicone stent group (n = 15) that received stent insertion into the lower 1/3 of the oesophagus under fluoroscopic guidance and a control group (n = 15). Oesophagography was performed at 1, 2 and 4 weeks. Five rabbits in each group were euthanized at each time point for histological examination. RESULTS: Magnesium-silicone stents showed good flexibility and elasticity, and degraded more slowly than bare stents at pH 4.0 and 7.4. All stent insertions were well tolerated. The oesophageal diameters at 1, 2 and 4 weeks were 9.7 ± 0.7, 9.6 ± 0.8 and 9.6 ± 0.5 mm, respectively (vs. 9.2 ± 0.8 mm before intervention; P > 0.05). Stent migration occurred in six rabbits (one at 1 week, one at 2 and four at 4). Microscopy demonstrated dilation of the oesophageal wall within 1 week of insertion. Oesophageal injury and collagen deposition following stent insertion were similar to control (P > 0.05). CONCLUSIONS: Oesophageal magnesium-silicone stent insertion was feasible and provided reliable support for 2 weeks without causing oesophageal injury or collagen deposition. KEY POINTS: • Mg stent provided apparently adequate radial force and silicone membrane reduced magnesium biodegradation • Stent insertion provided good support for at least 2 weeks before biodegradation • Stenting effectively resulted in oesophageal wall remodelling, without demonstrable injury.

A Comparison of the Accuracy Between a Digital Fabrication Workflow and a Conventional Fabrication Workflow for Occlusal Appliances: A Pilot Study.

PURPOSE: To compare the accuracy of occlusal stabilization appliances fabricated by digital workflows to those fabricated by conventional workflows. MATERIALS AND METHODS: In total, 10 volunteers were recruited in this single-blinded crossover study. All volunteers received two types of occlusal stabilization appliances: a digital additively manufactured stabilization splint (DS) and a conventionally fabricated splint (CS). The accuracy was assessed using a 4-point rating scale addressing two aspects of the occlusal appliances: occlusal contact and basic performance. In addition, silicone impression materials were used to assess the gap between the appliance and the maxillary arch to ensure an accurate fit. Differences were quantitatively assessed with Mann-Whitney U test and independent-sample t test. RESULTS: The occlusal contact rating of DS (15.90 ± 1.73) was significantly higher than that of CS (14.10 ± 1.10, P < .05). The basic performance rating of DS (8.70 ± 0.48) was also significantly higher than that of CS (7.20 ± 0.92. P < .05). Quantitative evaluation of fit accuracy revealed a statistically significant difference (P < .05), with DS (636.29 ± 268.51 µm) being superior to CS (704.2 ± 306.05 µm). CONCLUSION: The stabilization splints fabricated with a digital workflow showed better accuracy than the conventionally fabricated splints in terms of occlusal contact, basic performance, and fit accuracy. Because this is a pilot study, formal trials with a completely digital fabrication workflow will be conducted in the future.

Treatment of Reducible Atlantoaxial Dislocation and Basilar Invagination Using the Head Frame Reduction Technique and Atlantoaxial Arthrodesis.

STUDY DESIGN: Retrospective case series. OBJECT: To evaluate the outcomes of a head frame reduction and atlantoaxial arthrodesis technique for the treatment of reducible basilar invagination (BI) and atlantoaxial dislocation (AAD). METHODS: Seventy-two reducible BI and AAD cases who were treated with the head frame reduction and atlantoaxial arthrodesis technique from June 2015 to December 2018 were retrospectively analyzed. Radiological measurements including the atlantodental interval (ADI), the height of odontoid process above Chamberlain line, Wackenheim line, clivus-canal angle (CCA) and JOA score were evaluated. RESULTS: There was no death in this series. The follow-up period ranged from 6 to 32 months (mean: 21.2 months). Radiological, complete or 90% reduction was attained and complete decompression was demonstrated in all patients. The CCA increased from 123.22 ± 8.36 preoperatively to 143.05 ± 8.79 postoperatively (P < 0.01). There was no patient found postoperative dysphagia. Neurological improvement was observed in all patients, with the JOA scores increasing from 12.53 ± 1.93 preoperatively to 16.13 ± 1.23 postoperatively (P < 0.01). Solid bony fusion was demonstrated in 69 patients at follow-up (95.8%). CONCLUSION: Head frame reduction technique is a simple and effective treatment which could relief neurologic compression and adjust the CCA in patients with reducible AAD and BI with lower potential risks. Atlantoaxial fixation with short segmental fixation, strong purchase and low shearing force could maintain superior stabilization. The safety and long-term efficacy of such fixation and reduction technique were favorable, which illustrated that it could be a promising treatment algorithm for such kind of disease.

Usefulness of 3D Printed Models in the Management of Complex Craniovertebral Junction Anomalies: Choice of Treatment Strategy, Design of Screw Trajectory, and Protection of Vertebral Artery.

OBJECTIVE: To evaluate the usefulness of 3-dimensional (3D) printed models as an aid for the treatment of complex CVJ anomalies. METHODS: 3D printed models were fabricated for 21 patients with complex CVJ anomalies, including vertebral artery anomaly, thin C2 pedicle, vertical atlantoaxial facet joint, or rotational dislocation combined with atlantoaxial dislocation and basilar invagination. Preoperative planning, surgical simulation, and intraoperative reference were achieved using the 3D model during the surgical treatment. The usefulness of 3D printed models, and postoperative clinical and radiological outcomes were assessed. RESULTS: Direct posterior reduction and atlantoaxial fixation were achieved in 19 patients. Transoral odontoidectomy followed by posterior fixation was implemented for 2 patients with vertical facet joint and rotational dislocation. All screws were safely inserted with no complication, and 90% patients achieved a >60% reduction of both horizontal and vertical dislocation. Clinical symptoms improved in all patients, with the averaged Japanese Orthopedic Association scores increasing from 11.14 to 14.43 (P < 0.01). CONCLUSIONS: The patient-specific 3D printed model would be an effective tool for evaluation of the reducibility of the atlantoaxial dislocation and basilar invagination, decision making in choosing the optimal surgical approach and way of fixation, and precise placement of the screw while protecting the vertebral artery and spinal cord. The risk of neurovascular injury was minimized, and encouraging outcomes were achieved with the aid of this technique.

Biomechanical evaluation of two alternative techniques to the Goel-Harms technique for atlantoaxial fixation: C1 lateral mass-C2 bicortical translaminar screw fixation and C1 lateral mass-C2/3 transarticular screw fixation.

OBJECTIVE: The authors conducted a study to investigate the biomechanical feasibility and stability of C1 lateral mass-C2 bicortical translaminar screw (C1LM-C2TL) fixation, C1 lateral mass-C2/3 transarticular screw (C1LM-C2/3TA) fixation, and C1LM-C2/3TA fixation with transverse cross-links (C1LM-C2/3TACL) as alternative techniques to the Goel-Harms technique (C1 lateral mass-C2 pedicle screw [C1LM-C2PS] fixation) for atlantoaxial fixation. METHODS: Eight human cadaveric cervical spines (occiput-C7) were tested using an industrial robot. Pure moments that were a maximum of 1.5 Nm were applied in flexion-extension (FE), lateral bending (LB), and axial rotation (AR). The specimens were first tested in the intact state and followed by destabilization (a type II odontoid fracture) and fixation as follows: C1LM-C2PS, C1LM-C2TL, C1LM-C2/3TA, and C1LM-C2/3TACL. For each condition, the authors evaluated the range of motion and neutral zone across C1 and C2 in all directions. RESULTS: Compared with the intact spine, each instrumented spine significantly increased in stability at the C1-2 segment. C1LM-C2TL fixation demonstrated similar stability in FE and LB and greater stability in AR than C1LM-C2PS fixation. C1LM-C2/3TA fixation was equivalent in LB and superior in FE to those of C1LM-C2PS and C1LM-C2TL fixation. During AR, the C1LM-C2/3TA-instrumented spine failed to maintain segmental stability. After adding a cross-link, the rotational stability was significantly increased in the C1LM-C2/3TACL-instrumented spine compared with the C1LM-C2/3TA-instrumented spine. Although inferior to C1LM-C2TL fixation, the C1LM-C2/3TACL-instrumented spine showed equivalent rotational stability to the C1LM-C2PS-instrumented spine. CONCLUSIONS: On the basis of our biomechanical study, C1LM-C2TL and C1LM-C2/3TACL fixation resulted in satisfactory atlantoaxial stabilization compared with C1LM-C2PS. Therefore, the authors believe that the C1LM-C2TL and C1LM-C2/3TACL fixation may serve as alternative procedures when the Goel-Harms technique (C1LM-C2PS) is not feasible due to anatomical constraints.

Silicone-covered biodegradable magnesium stent for treating benign esophageal stricture in a rabbit model.

BACKGROUND: Stent insertion can effective alleviate the symptoms of benign esophageal strictures (BES). Magnesium alloy stents are a good candidate because of biological safety, but show a poor corrosion resistance and a quick loss of mechanical support in vivo. AIM: To test the therapeutic and adverse effects of a silicone-covered magnesium alloy biodegradable esophageal stent. METHODS: Fifteen rabbits underwent silicone-covered biodegradable magnesium stent insertion into the benign esophageal stricture under fluoroscopic guidance (stent group). The wall reconstruction and tissue reaction of stenotic esophagus in the stent group were compared with those of six esophageal stricture models (control group). Esophagography was performed at 1, 2, and 3 weeks. Four, six, and five rabbits in the stent group and two rabbits in the control groups were euthanized, respectively, at each time point for histological examination. RESULTS: All stent insertions were well tolerated. The esophageal diameters at immediately, 1, 2 and 3 wk were 9.8 ± 0.3 mm, 9.7 ± 0.7 mm, 9.4 ± 0.8 mm, and 9.2 ± 0.5 mm, respectively (vs 4.9 ± 0.3 mm before stent insertion; P < 0.05). Magnesium stents migrated in eight rabbits [one at 1 wk (1/15), three at 2 wk (3/11), and four at 3 wk (4/5)]. Esophageal wall remodeling (thinner epithelial and smooth muscle layers) was found significantly thinner in the stent group than in the control group (P < 0.05). Esophageal injury and collagen deposition following stent insertion were similar and did not differ compared to rabbits with esophageal stricture and normal rabbits (P > 0.05). CONCLUSION: Esophageal silicone-covered biodegradable magnesium stent insertion is feasible for BES without causing severe injury or tissue reaction. Our study suggests that insertion of silicone-covered magnesium esophageal stent is a promising approach for treating BES.

Trans-arterial embolisation therapy of dural carotid-cavernous fistulae using low concentration n-butyl-cyanoacrylate.

BACKGROUND: Trans-venous embolisation has been accepted as the preferred treatment for dural carotid-cavernous fistulae (DCCF). However, such an approach is not always feasible. In this circumstance, trans-arterial embolisation with low concentration n-butyl-cyanoacrylate glue (NBCA) may be a feasible alternative. We report our results and experience of this method for DCCF. MATERIALS AND METHODS: Five patients with DCCF were treated by trans-arterial embolisation using low concentration NBCA by wedging the microcatheter into the main feeding artery. All five lesions were associated with venous drainage into the superior ophthalmic vein. The inferior petrosal sinus was patent in one patient and thrombosed in four. Additional venous drainage into the Sylvian vein and the superior petrosal sinus was observed in two patients. FINDINGS: The definitive NBCA injection was performed via the branches of the middle meningeal artery in three patients and accessory meningeal artery as well as ascending pharyngeal artery in two patients. Four patients showed complete obliteration of the DCCF on the post-embolisation angiogram, and follow-up studies showed clinical cure or improvement and successful obliteration of the DCCF. One patient had a residual DCCF after the procedure, but showed complete obliteration and clinical cure at 5-month follow-up. Glue penetrated into the Sylvian vein in one patient during the procedure without sequelae. Two patients had transient worsening of ocular symptoms after the procedure. CONCLUSIONS: Trans-arterial embolisation with low concentration NBCA using a wedged microcatheter technique is still a safe and effective treatment for DCCF when the transvenous approach is not feasible. However, care must be taken to prevent inadvertent arterial and venous embolisation.

Carious status and supragingival plaque microbiota in hemodialysis patients.

OBJECTIVE: The aim of this study was to evaluate the carious status and the microbial profiles of supragingival plaque in patients with chronic kidney disease undergoing hemodialysis. METHODS: This study included 30 patients with chronic kidney disease undergoing hemodialysis as well as 30 control subjects. Dental examination was performed and the decayed-missing-filled-teeth was recorded. Supragingival plaque was taken and analyzed using 16S rRNA gene amplicon by Illumina MiSeq sequencing to detect microbial composition and community diversity and structure. RESULTS: The level of decayed-missing-filled-teeth was higher in the hemodialysis group than that in the control group. Microbial analysis showed a decrease in α diversity and a increase in relative abundance and prevalence of many acidogenic and aciduric caries related species in the supragingival plaque samples of the hemodialysis patients, including Streptococcus mutans, Lactobacillus salivarius, Lactobacillus fermentum, Lactobacillus vaginalis, Scardovia wiggsiae F0424, and Actinomyces naeslundii. CONCLUSION: Our results suggested that the hemodialysis patients were more susceptible to caries. More attentions for caries prevention and treatment should be paid to improve their life quality, and even to reduce their cardiovascular events and survival.

Preparation, characterization and uptake by primary cultured rat hepatocytes of liposomes surface-modified with glycyrrhetinic acid.

3-succinyl-30-stearyl glycyrrhetinic acid (Suc-GLAOSt) was synthesized as a targeting molecule, and incorporated in ordinary to liposomes (LP) to prepare a liposome surface-modified with glycyrrhetinic acid (LP-GLA), which could bind to the hepatocyte through the specific binding site of glycyrrhetinic acid (GLA) on the surface of rat cellular membrane. The maximal molar ratio of Suc-GLAOSt to total lipids in LP-GLA was 1:10. Calcein loaded liposome (Cal-LP) and calcein loaded LP-GLA (Cal-LP-GLA) were prepared by an ethanol injection method. The average diameter of Cal-LP and Cal-LP-GLA was 65 nm +/- 16 nm and 68 nm +/- 21 nm, respectively. The characteristics of cellular uptake of the two types of liposome were investigated through cellular uptake and competitive inhibition experiments. The uptake of Cal-LP-GLA by rat hepatocytes was markedly higher (3.3-fold) than that of Cal-LP (P < 0.01). The uptake of Cal-LP-GLA was inhibited, but the uptake of Cal-LP was not influenced by adding extraneous GLA. LP-GLA may be internalized by hepatocytes via the specific binding site, and can be used as a novel and promising carrier for targeting drug delivery to hepatocytes.

[Comparison of two preparation methods applied in tanshinone II(A)-loaded PLGA nanoparticles].

OBJECTIVE: To optimize formulation of tanshinone II(A)-loaded PLGA nanoparticles and compare the difference of two methods in preparation and quality of nanoparticles. METHOD: The two methods were nanoprecipitation method and emulsion-evaporation method. Single factor experiments and central composite design and response surface method were used to optimize the formulation of nanoparticles. The nanoparticles were characterized at size, morphology, entrapment efficiency, drug loading, drug recovery rate, crystallinity and drug release in vitro. RESULT: The mean diameters were 225 nm and 183 nm, the entrapment efficiency were 95.49% and 87.99%, the drug loading were 2.03% and 0.16%, and the drug recovery rates were 38.42% and 17.59% respectively for nanoprecipitation method and emulsion-evaporation method. CONCLUSION: Nanoprecipitation method was better than emulsion-evaporation method for preparation of tanshinone II(A)-loaded PLGA nanoparticles.

Concomitant aneurysm detection in an intracranial dolichoectasia mouse model using a MicroFil polymer perfusion technique.

OBJECTIVE: To assess the feasibility of using MicroFil polymer perfusion to detect concomitant saccular aneurysms in an intracranial arterial dolichoectasia (IADE) model in mice, and to report detailed histomorphometric features of these aneurysms. MATERIALS AND METHODS: IADE models were created in C57/BL6 mice via microsurgical injection of 25 mU elastase into the cisterna magna. The cerebral vasculature was perfused with MicroFil polymer and harvested at 1, 3, and 7 days, and 2 and 4 weeks (n=8 for each group). IADE was defined by a tortuosity index >10 combined with a 25% increase in diameter of the A1 segment of the anterior cerebral artery (ACA), internal carotid artery (ICA), or basilar artery compared with the baseline of controls, which received heat-inactivated elastase. Saccular aneurysm occurrence rate, location, and morphological parameters were investigated using macroscopic and microscopic analysis. RESULTS: IADE was present in 95% (36/38) of the subjects, with a mortality rate of 5% (2/40). Fifteen concomitant saccular aneurysms were detected in 8 (21%) of the 38 surviving mice, including 6 at the posterior communicating artery, 1 along the ACA, 2 along the anterior communicating artery complex, 3 along the ICA, and 3 along the middle cerebral artery. Rupture was confirmed in two aneurysms. Histological examination indicated that the aneurysms develop via arterial-wall remodelling, which is characterized by internal elastic lamina disruptions and muscular layer discontinuity in the media. CONCLUSIONS: The proportion of subjects developing saccular aneurysms in addition to IADE in our mouse model is similar to the 15% of patients with IADE who have concomitant saccular aneurysms.

[Studies on characteristics of absorption and separation of traditional Chinese medicine compound prescription by macroporous resin].

OBJECTIVE: Study the characteristics of absorption and separation of traditional Chinese medicine compound prescription using macroporous resin. METHOD: Study the techniquecs and characteristics of absorption and separation of a sample by macroporous resin, which is composed of coptis root, rhubarb and common anemarrhena rhizome, containing alkaloid, anthraquinone and saponin. RESULT: It is proved by qualitative and quantitative researches studies that after absorbed and separated by optimized technics process, most prime effective components or section fractions in traditional Chinese medicine compound prescription can be reserved maintained. CONCLUSION: If the techniquecs of separation is properly designed, the same kind of macropore resin can absorbd and separate various effective components or section in traditional Chinese medicine compound prescription which have with different chemical structures efficiently.

The potential adjuvanticity of quaternized chitosan hydrogel based microparticles for porcine reproductive and respiratory syndrome virus inactivated vaccine.

Infectious diseases possess a big threat to the livestock industry worldwide. Currently, inactivated veterinary vaccines have attracted much attention to prevent infection due to their safer profile compared to live attenuated vaccine. However, its intrinsic poor immunogenicity demands the incorporation of an adjuvant. Mineral oil based adjuvant (Montanide™ ISA206) was usually used to potentiate the efficacy of veterinary vaccines. However, ISA206 could not induce robust cellular immune responses, which was very important in controlling virus replication and clearing the infected cells. Moreover, mineral oil would result in severe side effects. To improve both the humoral and cellular immune responses of porcine reproductive and respiratory syndrome virus (PRRSV) inactivated vaccine, we developed pH-sensitive and size-controllable quaternized chitosan hydrogel microparticles (Gel MPs) without using chemical cross linking agent. Gel MPs, ionic cross-linked with glycerophosphate (GP), were biocompatible and could efficiently adsorb the inactivated PRRSV vaccine with a loading capacity of 579.05µg/mg. After intramuscular immunization in mice, results suggested that Gel MPs elicited significantly higher cell-mediated immune responses and comparable humoral immune responses compared to ISA 206. Regarding the biocompatibility, safety and effectiveness, Gel MPs would be a promising candidate to enhance the efficacy of veterinary vaccine.

[Encapsulated ANP cDNA transfection cells attenuate hypertension in hypertensive rats].

OBJECTIVE: We Investigated a gene therapy delivery system based on microcapsules enclosing recombinant Chinese hamster ovary (CHO) cells engineered to secrete a therapeutic peptide-atrial natriuretic peptide (ANP). METHOD: Human atrial natriuretic peptide gene transfecting Chinese hamster ovary (CHO) cells were encapsulated in non-antigenic biocompatible polycaprolactone (PCL) capsules prior to their implantation into rats, then, the PCL-tubes were implanted into hypertensive DSS rats intraperitoneally. RESULT: The PCL-tubes 2 d post implantation caused a significant delay of blood pressure increase. The effect lasted for more than 5 months. The PCL-tubes also caused significant increases in renal blood flow, glomerular filtration rate, sodium output, urine excretion. Plasma levels of ANP in rats implanted with the PCL-tubes containing engineering cells is higher than that of the control rats. CONCLUSION: This study demonstrates encapsulated engineering cells have significant potential in treatment of hypertension.

Revision hip arthroplasties with use of the modular S-ROM prosthesis.

OBJECTIVE: The aim of this study was to revision hip arthroplasties in ankylosing spondylitis. MATERIALS AND METHODS: We performed 21 revision hip arthroplasty in 16 patients with ankylosing spondylitis (AS) using S-ROM modular femoral stem. At the final follow-up, all patients were able to ambulate without any walking aids. RESULTS: The mean Harris hip score improved from 57.2 (35 to 74) pre-operatively to 90.2 points (73 to 100) post-operatively, and the outcome was classified as good or excellent in 17 hips (81%). Fixation of the femoral component was classified as stable with bone ingrowth in 15 hips (71.4%), stable with fibrous ingrowth in 2 hips (9.5%), and radiolucent loosening in 4 hips (19.1%). Five hips developed a pedestal at the tip of femoral component. Femoral osteolysis was found in 3 hips (14.2%): 3 hips in Gruen zones 1 and 7, one hip in zone 7, and two hips in zone 1. One hip underwent acetabular revision because of breakage of polyethylene liner, and the well-fixed femoral component was left in situ. Thigh pain developed in 1 patient (6.2%). Kaplan-Meier survival was 81% at 64 months, with radiographic loosening as an end-point when two hips were at risk. CONCLUSION: Satisfactory results of midterm clinical and radiographic follow-up can be achieved using S-ROM modular femoral stem for revision of femoral stem in ankylosing spondylitis.

Reconstructive endovascular treatment of intracranial aneurysms with the Willis covered stent: medium-term clinical and angiographic follow-up.

OBJECT: Placement of covered stents has emerged as a promising therapeutic option for cerebrovascular diseases. However, the medium- and long-term efficacy and safety of covered stents in the treatment of these diseases remain unclear. The purpose of this study was to evaluate the medium-term clinical and angiographic outcomes of covered stent placement for the treatment of intracranial aneurysms. METHODS: The authors' institutional review board approved the study. Thirty-four patients (13 females and 21 males; mean age 41.9 years) with 38 intracranial aneurysms were treated with the Willis covered stent. Clinical and angiographic follow-up were performed at 3 months, at 6-12 months, and annually thereafter. The initial procedural and follow-up outcomes were collected and analyzed retrospectively. RESULTS: Forty-two covered stents were successfully implanted into the target artery in 33 patients with 37 aneurysms, and 1 covered stent navigation failed in 1 patient. A complete aneurysm exclusion was initially achieved in 24 patients with 28 aneurysms, and a minor endoleak occurred in 9 patients with 9 aneurysms. Postoperatively, 2 patients died of complications related to the procedure. Angiographic and clinical follow-up data are available in 30 patients. The angiographic follow-up (17.5 ± 9.4 months [mean ± SD]) exhibited complete occlusion in 28 patients with 31 aneurysms, and incomplete occlusion in 2 aneurysms, with an asymptomatic in-stent stenosis in 3 patients (10%). The clinical follow-up (26.7 ± 13 months [mean ± SD]) demonstrated that 16 patients (53.3%) experienced a full recovery, and 14 patients (46.7%) improved. No aneurysm rupture, thromboembolic events, or neurological deficits resulting from closure of a perforating vessel by covered stent placement occurred. CONCLUSIONS: Endovascular reconstruction with the Willis covered stent represents a safe, durable, and curative treatment option for selected intracranial aneurysms, yielding an excellent medium-term patency of the parent artery and excellent clinical outcomes.

Structures, photoluminescence, up-conversion, and magnetism of 2D and 3D rare-earth coordination polymers with multicarboxylate linkages.

Four new rare-earth compounds, [Eu(NDC)1.5(DMF)2] (1), [Nd2(NDC)3(DMF)4].H2O (2), [La2(NDC)3(DMF)4].0.5H2O (3), and [Eu(BTC)(H2O)] (4), where NDC = 1,4-naphthalenedicarboxylate, BTC = 1,3,5-benzenetricarboxylate, and DMF = N,N-dimethylformamide, have been synthesized through preheating and cooling-down crystallization. Compounds 1-3 possess similar 2D structures, in which the NDC ligands link M(III) (M = La, Nd, and Eu) ions of two adjacent double chains constructed by NDC ligands and dinuclear M(III) building units. In compound 4, the Eu(III) ion is seven-coordinated by O atoms from six BTC ligands and one terminal water molecule in a distorted pentagonal-bipyramidal coordination environment. If the BTC ligand and the Eu(III) ion are regarded as six-connected nodes, respectively, the structure of compound 4 can be well described as a 3D six-connected net. Furthermore, compounds 1 and 4 exhibit strong red luminescence upon 355-nm excitation. Compound 2 displays interesting emissions in the near-IR region, and yellow (580 nm) pumping of this compound results in UV and intense blue emissions through an up-conversion process. The magnetic properties of compounds 1, 2, and 4 have been studied through measurement of their magnetic susceptibilities over the temperature range of 4-300 K.