Formation of Water-Soluble Complexes from Fullerene with Biocompatible Block Copolymers Bearing Pendant Glucose and Phosphorylcholine.

Double-hydrophilic diblock copolymers, PMPC100-block-PGEMAn (M100Gn), were synthesized via reversible addition-fragmentation chain transfer radical polymerization using glycosyloxyethyl methacrylate and 2-(methacryloyloxy)ethyl phosphorylcholine. The degree of polymerization (DP) of the poly(2-(methacryloyloxy) ethylphosphorylcholine) (PMPC) block was 100, whereas the DPs (n) of the poly(glycosyloxyethyl methacrylate) PGEMA block were 18, 48, and 90. Water-soluble complexes of C70/M100Gn and fullerene (C70) were prepared by grinding M100Gn and C70 powders in a mortar and adding phosphate-buffered saline (PBS) solution. PMPC can form a water-soluble complex with hydrophobic C70 using the same method. Therefore, the C70/M100Gn complexes have a core-shell micelle-like particle structure possessing a C70/PMPC core and PGEMA shells. The maximum amounts of solubilization of C70 in PBS solutions using 2 g/L each of M100G18, M100G48, and M100G90 were 0.518, 0.358, and 0.257 g/L, respectively. The hydrodynamic radius (Rh) of C70/M100Gn in PBS solutions was 55-75 nm. Spherical aggregates with a similar size to the Rh were observed by transmission electron microscopy. When the C70/M100Gn PBS solutions were irradiated with visible light, singlet oxygen was generated from C70 in the core. It is expected that the C70/M100Gn complexes can be applied to photosensitizers for photodynamic therapy treatments.

Preparation of Biocompatible Poly(2-(methacryloyloxy)ethyl phosphorylcholine) Hollow Particles Using Silica Particles as a Template.

Hydrophilic poly(2-(methacryloyloxy)ethyl phosphorylcholine) (PMPC) shows biocompatibility because the pendant phosphorylcholine group has the same chemical structure as the hydrophilic part of phospholipids that form cell membranes. Hollow particles can be used in various fields, such as a carrier in drug delivery systems because they can encapsulate hydrophilic drugs. In this study, vinyl group-decorated silica particles with a radius of 150 nm were covered with cross-linked PMPC based on the graft-through method. The radius of PMPC-coated silica particles increased compared to that of the original silica particles. The PMPC-coated silica particles were immersed in a hydrogen fluoride aqueous solution to remove template silica particles to prepare the hollow particles. The PMPC hollow particles were characterized by dynamic light scattering, infrared spectroscopy, thermogravimetric analysis, and transmission electron microscopy observations. The thickness of the hollow particle shell can be controlled by the polymerization solvent quality. When a poor solvent for PMPC was used for the polymerization, PMPC hollow particles with thick shells can be obtained. The PMPC hollow particles can encapsulate hydrophilic guest molecules by immersing the hollow particles in a high-concentration guest molecule solution. The biocompatible PMPC hollow particles can be used in a drug carrier.

pH-Responsive Association Behavior of Biocompatible Random Copolymers Containing Pendent Phosphorylcholine and Fatty Acid.

Well-defined pH-responsive biocompatible random copolymers composed of 2-(methacryloyloxy)ethyl phosphorylcholine and varying quantities of sodium 11-(acrylamido)undecanoate (AaU) (fAaU = 0-58 mol %) were synthesized via reversible addition-fragmentation chain transfer radical polymerization. The pH-responsive association and dissociation behavior of the random copolymers was studied via turbidity, 1H nuclear magnetic resonance relaxation time, dynamic light scattering, static light scattering (SLS), and fluorescence measurements. At basic pH levels, the random copolymers dissolved in water in a unimer state because the AaU units behaved in a hydrophilic manner as a result of the ionization of the pendent fatty acids. The random copolymers with fAaU < 52 mol % associated intramolecularly within a single polymer chain to form unimer micelles at pH 3 because of the protonation of the pendent fatty acids. On the other hand, the random copolymer with fAaU ≥ 52 mol % formed intermolecular aggregates composed of four polymer chains at pH 3, as established by the SLS measurements. The random copolymers displayed the ability to solubilize hydrophobic guest molecules, such as N-phenyl-1-naphthylamine, into the hydrophobic microdomain formed by the pendent dehydrated fatty acids at acidic pHs. At pH 4, 1-pyrememethanol is captured by the random copolymer with fAaU = 52 mol %, and it is released from the random copolymer above pH 9. Furthermore, the mucoadhesive properties of the random copolymer with fAaU = 9 mol % were studied using a surface plasmon resonance technique. The copolymer was adsorbed onto mucin at pH 3; however, the adsorption decreased at pH 7.4.

Reversal Activity and Toxicity of Heparin-Binding Copolymer after Subcutaneous Administration of Enoxaparin in Mice.

Uncontrolled bleeding after enoxaparin (ENX) is rare but may be life-threatening. The only registered antidote for ENX, protamine sulfate (PS), has 60% efficacy and can cause severe adverse side effects. We developed a diblock copolymer, heparin-binding copolymer (HBC), that reverses intravenously administered heparins. Here, we focused on the HBC inhibitory activity against subcutaneously administered ENX in healthy mice. BALB/c mice were subcutaneously injected with ENX at the dose of 5 mg/kg. After 110 min, vehicle, HBC (6.25 and 12.5 mg/kg), or PS (5 and 10 mg/kg) were administered into the tail vein. The blood was collected after 3, 10, 60, 120, 360, and 600 min after vehicle, HBC, or PS administration. The activities of antifactors Xa and IIa and biochemical parameters were measured. The main organs were collected for histological analysis. HBC at the lower dose reversed the effect of ENX on antifactor Xa activity for 10 min after antidote administration, whereas at the higher dose, HBC reversed the effect on antifactor Xa activity throughout the course of the experiment. Both doses of HBC completely reversed the effect of ENX on antifactor IIa activity. PS did not reverse antifactor Xa activity and partially reversed antifactor IIa activity. HBC modulated biochemical parameters. Histopathological analysis showed changes in the liver, lungs, and spleen of mice treated with HBC and in the lungs and heart of mice treated with PS. HBC administered in an appropriate dose might be an efficient substitute for PS to reverse significantly increased anticoagulant activity that may be connected with major bleeding in patients receiving ENX subcutaneously.

Anticoagulant Properties of Poly(sodium 2-(acrylamido)-2-methylpropanesulfonate)-Based Di- and Triblock Polymers.

Di- and triblock copolymers with low dispersity of molecular weight were synthesized using radical addition-fragmentation chain transfer polymerization. The copolymers contained anionic poly(sodium 2-acrylamido-2-methylpropanesulfonate) (PAMPS) block as an anticoagulant component. The block added to lower the toxicity was either poly(ethylene glycol) (PEG) or poly(2-(methacryloyloxy)ethyl phosphorylcholine) (PMPC). The polymers prolonged clotting times both in vitro and in vivo. The influence of the polymer architecture and composition on the efficacy of anticoagulation and safety parameters was evaluated. The polymer with the optimal safety/efficacy profile was PEG47- b-PAMPS108, i.e., a block copolymer with the degrees of polymerization of PEG and PAMPS blocks equal to 47 and 108, respectively. The anticoagulant action of copolymers is probably mediated by antithrombin, but it differs from that of unfractionated heparin. PEG47- b-PAMPS108 also inhibited platelet aggregation in vitro and increased the prostacyclin production but had no antiplatelet properties in vivo. PEG47- b-PAMPS108 anticoagulant activity can be efficiently reversed with a copolymer of PEG and poly((3-(methacryloylamino)propyl)trimethylammonium chloride) (PMAPTAC) (PEG41- b-PMAPTAC53, HBC), which may be attributed to the formation of polyelectrolyte complexes with PEG shells without anticoagulant properties.

Selective adsorption of modified nucleoside cancer biomarkers by hybrid molecularly imprinted adsorbents.

Modified adenosine nucleosides have been proposed to be potential DNA-based biomarkers for early diagnosis of tumor and a promising tool for the development of noninvasive prediction systems. However, the low concentration of modified adenosine nucleosides in physiological fluids makes them challenging for both quantitative and qualitative determination. Therefore, materials, which are potentially useful for selective adsorption of nucleobase-containing compounds, were obtained. To obtain the adsorbents, the silica gel particles were coated layer-by-layer with films of the polymers with different combinations of polymers containing thymine groups. Next, the microspheres were irradiated with UV light in the presence of 2'-deoxyadenosine or 5'-deoxy-5'-(methylthio)adenosine, as template molecules, which resulted in the photodimerization of thymine moieties and molecular imprinting of adsorbed modified adenosine compounds. The selectivity of the adsorption was significantly enhanced by the photoimprinting process. Eventually, the imprinted particles have shown an improved ability to recognize mainly 2'-deoxyadenosine and 5'-deoxy-5'-(methylthio)adenosine molecules. The best performing adsorbent was obtained using modified natural polysaccharides. The studied materials could serve as promising adsorbents of biomarkers for tumor diagnostics.

Preparation of upper critical solution temperature (UCST) responsive diblock copolymers bearing pendant ureido groups and their micelle formation behavior in water.

Poly(2-ureidoethyl methacrylate) (PUEM) was prepared via reversible addition-fragmentation chain transfer (RAFT) controlled radical polymerization and a post-modification reaction. PUEM shows upper critical solution temperature (UCST) behavior in aqueous solution. Although PUEM can dissolve in water above the UCST, it cannot dissolve in water below the UCST. Diblock copolymers (MmUn) composed of a biocompatible hydrophilic poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) block and a PUEM block with different compositions were prepared via RAFT radical polymerization and a post-modification reaction. "M" and "U" represent PMPC and PUEM blocks, respectively, and the subscripts represent the degree of polymerization of each block. M95U149 and M20U163 formed polymer micelles comprising a PUEM core and a PMPC shell below the critical aggregation temperature (Tc) in aqueous solution. Polymer micelles were formed from M20U163 below 32 °C, which can incorporate guest molecules into the core.

Multifunctional core-shell-corona-type polymeric micelles for anticancer drug-delivery and imaging.

We have developed core-shell-corona-type polymeric micelles that can integrate multiple functions in one system, including the capability of accommodating hydrophobic dyes into core and hydrophilic drug into the shell, as well as pH-triggered drug-release. The neutral and hydrophilic corona sterically stabilizes the multifunctional polymeric micelles in aqueous solution. The mineralization of calcium phosphate (CaP) on the PAA domain not only enhances the diagnostic efficacy of organic dyes, but also works as a diffusion barrier for the controlled release.

Preparation and characterization of polyion complex micelles with phosphobetaine shells.

A pair of oppositely charged diblock copolymers, poly(2-(methacryloyloxy)ethyl phosphorylcholine)-block-poly((3-(methacryloylamino)propyl)trimethylammonium chloride) (PMPC-b-PMAPTAC) and poly(2-(methacryloyloxy)ethyl phosphorylcholine)-block-poly(sodium 2-(acrylamido)-2-methylpropanesulfonate) (PMPC-b-PAMPS), was prepared via reversible addition-fragmentation chain transfer radical polymerization using a PMPC-based macro chain transfer agent. The pendant phosphorylcholine group in the hydrophilic PMPC block has anionic phosphate and cationic quaternary amino groups, which are neutralized within the pendant group. Therefore, the mixing of aqueous solutions of PMPC-b-PMAPTAC and PMPC-b-PAMPS leads to the spontaneous formation of simple core-shell spherical polyion complex (PIC) micelles comprising of a segregated PIC core and PMPC shells. The PIC micelles were characterized using (1)H NMR spin-spin (T2) and spin-lattice relaxation times (T1), diffusion-ordered NMR spectroscopy, static light scattering, dynamic light scattering (DLS), and transmission electron microscopy techniques. The hydrodynamic size of the PIC micelle depended on the mixing ratio of PMPC-b-PMAPTAC and PMPC-b-PAMPS; the maximum size occurred at the mixing ratio yielding stoichiometric charge neutralization. The PIC micelles disintegrated to become unimers with the addition of salts.

Mechanistic insights and importance of hydrophobicity in cationic polymers for cancer therapy.

Development of molecules that can be effectively used for killing cancer cells remains a research topic of interest in drug discovery. However, various limitations of small molecules and nanotechnology-based drug-delivery systems hinder the development of chemotherapeutics. To resolve this issue, this study describes the potential application of polymeric molecules as anticancer drug candidates. We describe the design and synthesis of novel anticancer polymers containing hydrophobic groups. We established the fact that the cationic homopolymer (PAMPTMA) does not show any anticancer activity on its own; however, the insertion of hydrophobic moieties in copolymers (PAMPTMA-r-BuMA, PAMPTMA-r-HexMA, and PAMPTMA-r-OctMA) enhances their anticancer activity with a very low IC50 value (60 µg mL-1 for HepG2 cells). Mechanistic investigations were carried out using LDH leakage assay, cellular uptake, DOSY NMR and molecular dynamics to study the interaction between the polymer and the cell membrane as well as the role of hydrophobicity in enhancing this interaction. The results demonstrated that polymers are attracted by the anionic cancer cell membrane, which then leads to the insertion of hydrophobic groups inside the cell membrane, causing its disruption and ultimate lysis of the cell. This study demonstrates a novel and better approach for the rational design and discovery of new polymeric anticancer agents with improved efficacy.

Development of a novel antifouling platform for biosensing probe immobilization from methacryloyloxyethyl phosphorylcholine-containing copolymer brushes.

The immobilization of thiol-terminated poly[(methacrylic acid)-ran-(2-methacryloyloxyethyl phosphorylcholine)] (PMAMPC-SH) brushes on gold-coated surface plasmon resonance (SPR) chips was performed using the "grafting to" approach via self-assembly formation. The copolymer brushes provide both functionalizability and antifouling characteristics, desirable features mandatorily required for the development of an effective platform for probe immobilization in biosensing applications. The carboxyl groups from the methacrylic acid (MA) units were employed for attaching active biomolecules that can act as sensing probes for biospecific detection of target molecules, whereas the 2-methacryloyloxyethyl phosphorylcholine (MPC) units were introduced to suppress unwanted nonspecific adsorption. The detection efficiency of the biotin-immobilized PMAMPC brushes with the target molecule, avidin (AVD), was evaluated in blood plasma in comparison with the conventional 2D monolayer of 11-mercaptoundecanoic acid (MUA) and homopolymer brushes of poly(methacrylic acid) (PMA) also immobilized with biotin using the SPR technique. Copolymer brushes with 79 mol % MPC composition and a molecular weight of 49.3 kDa yielded the platform for probe immobilization with the best performance considering its high S/N ratio as compared with platforms based on MUA and PMA brushes. In addition, the detection limit for detecting AVD in blood plasma solution was found to be 1.5 nM (equivalent to 100 ng/mL). The results have demonstrated the potential for using these newly developed surface-attached PMAMPC brushes for probe immobilization and subsequent detection of designated target molecules in complex matrices such as blood plasma and clinical samples.

Preparation of a thermo-responsive drug carrier consisting of a biocompatible triblock copolymer and fullerene.

A triblock copolymer (PEG-b-PUEM-b-PMPC; EUM) comprising poly(ethylene glycol) (PEG), thermo-responsive poly(2-ureidoethyl methacrylate) (PUEM), and poly(2-(methacryloyloxy)ethyl phosphorylcholine) (PMPC) blocks was synthesized via controlled radical polymerization. PEG and PMPC blocks exhibit hydrophilicity and biocompatibility. The PUEM block exhibits an upper critical solution temperature (UCST). PMPC can dissolve hydrophobic fullerenes in water to form a complex by grinding PMPC and fullerene powders. Fullerene-C70 (C70) and EUM were ground in a mortar and phosphate-buffered saline (PBS) was added to synthesize a water-soluble complex (C70/EUM). C70/EUM has a core-shell-corona structure, whose core is a complex of C70 and PMPC, the shell is PUEM, and corona is PEG. The maximum C70 concentration dissolved in PBS was 0.313 g L-1 at an EUM concentration of 2 g L-1. The C70/EUM hydrodynamic radius (Rh) was 34 nm in PBS at 10 °C, which increased due to the PUEM block's UCST phase transition with increasing temperature, and Rh attained a constant value of 38 nm above 36 °C. An anticancer drug, doxorubicin, was encapsulated in the PUEM shell by hydrophobic interactions in C70/EUM at room temperature, which can be released by heating. The generation of singlet oxygen (1O2) from C70/EUM upon visible-light irradiation was confirmed using the singlet oxygen sensor green indicator. Water-soluble C70/EUM may be used as a carrier that releases encapsulated drugs when heated and as a photosensitizer for photodynamic therapy.

Drug-loading capacity of polylactide-based micro- and nanoparticles - Experimental and molecular modeling study.

Micro- and nanostructures prepared from biodegradable homopolymers and amphiphilic block copolymers (AmBCs) have found application as drug-delivery systems (DDSs). The ability to accumulate a drug is a very important parameter characterizing a given DDS. This work focuses on the impact of DDS size, the packing of polymer chains in the DDS, and drug - polymer matrix compatibility on the hydrophobic drug - loading capacity (DLC) of nano/microcarriers prepared from a biodegradable polymer or its copolymer. Using experimental measurements in combination with atomistic molecular dynamics simulations, an analysis of curcumin encapsulation in microspheres (MSs) from polylactide (PLA) homopolymer and nanoparticles (NPs) from PLA-block-poly(2-methacryloyloxyethylphosphorylcholine) AmBC was performed. The results show that curcumin has good affinity for the PLA matrix due to its hydrophobic nature. However, the DLC value is limited by the fact that curcumin only accumulates in the peripheral part of these structures. Such uneven drug distribution in the PLA matrix results from the non-homogeneous density of MSs (non-uniform packing of the polymer chains in the coil). The results also indicate that the MSs can retain a greater amount of hydrophobic drug compared to the NPs, which is associated with the formation of drug aggregates inside the PLA microparticles.

Highly Effective and Safe Polymeric Inhibitors of Herpes Simplex Virus in Vitro and in Vivo.

A series of poly(ethylene glycol)-block-poly(3-(methacryloylamino)propyl trimethylammonium chloride) (PEG-b-PMAPTAC) water-soluble block copolymers consisting of PEG and PMPTAC were obtained by reversible addition-fragmentation chain-transfer (RAFT) polymerization and demonstrated to function as highly effective herpes simplex virus type 1 (HSV-1) inhibitors as shown by in vitro tests (Vero E6 cells) and in vivo experiments (mouse model). Half-maximal inhibitory concentration (IC50) values were determined by quantitative polymerase chain reaction to be 0.36 ± 0.08 µg/mL for the most effective polymer PEG45-b-PMAPTAC52 and 0.84 ± 1.24 µg/mL for the less effective one, PEG45-b-PMAPTAC74. The study performed on the mouse model showed that the polymers protect mice from lethal infection. The polymers are not toxic to the primary human skin fibroblast cells up to the concentration of 100 µg/mL and to the Vero E6 cells up to 500 µg/mL. No systemic or topical toxicity was observed in vivo, even with mice treated with concentrated formulation (100 mg/mL). The mechanistic studies indicated that polymers interacted with the cell and blocked the formation of the entry/fusion complex. Physicochemical and biological properties of PEGx-b-PMAPTACy make them promising drug candidates.

Surface modification with well-defined biocompatible triblock copolymers Improvement of biointerfacial phenomena on a poly(dimethylsiloxane) surface.

To improve interfacial phenomena of poly(dimethylsiloxane) (PDMS) as biomaterials, well-defined triblock copolymers were prepared as coating materials by reversible addition-fragmentation chain transfer (RAFT) controlled polymerization. Hydroxy-terminated poly(vinylmethylsiloxane-co-dimethylsiloxane) (HO-PV(l)D(m)MS-OH) was synthesized by ring-opening polymerization. The copolymerization ratio of vinylmethylsiloxane to dimethylsiloxane was 1/9. The molecular weight of HO-PV(l)D(m)MS-OH ranged from (1.43 to 4.44)x10(4), and their molecular weight distribution (M(w)/M(n)) as determined by size-exclusion chromatography equipped with multiangle laser light scattering (SEC-MALS) was 1.16. 4-Cyanopentanoic acid dithiobenzoate was reacted with HO-PV(l)D(m)MS-OH to obtain macromolecular chain transfer agents (macro-CTA). 2-Methacryloyloxyethyl phosphorylcholine (MPC) was polymerized with macro-CTAs. The gel-permeation chromatography (GPC) chart of synthesized polymers was a single peak and M(w)/M(n) was relatively narrow (1.3-1.6). Then the poly(MPC) (PMPC)-PV(l)D(m)MS-PMPC triblock copolymers were synthesized. The molecular weight of PMPC in a triblock copolymer was easily controllable by changing the polymerization time or the composition of the macro-CTA to a monomer in the feed. The synthesized block copolymers were slightly soluble in water and extremely soluble in ethanol and 2-propanol. Surface modification was performed via hydrosilylation. The block copolymer was coated on the PDMS film whose surface was pretreated with poly(hydromethylsiloxane). The surface wettability and lubrication of the PDMS film were effectively improved by immobilization with the block copolymers. In addition, the number of adherent platelets from human platelet-rich plasma (PRP) was dramatically reduced by surface modification. Particularly, the triblock copolymer having a high composition ratio of MPC units to silicone units was effective in improving the surface properties of PDMS. By selective decomposition of the Si-H bond at the surface of the PDMS substrate by irradiation with UV light, the coating region of the triblock copolymer was easily controlled, resulting in the fabrication of micropatterns. On the surface, albumin adsorption was well manipulated.

Effect of Polycation Structure on Interaction with Lipid Membranes.

Interaction of polycations with lipid membranes is a very important issue in many biological and medical applications such as gene delivery or antibacterial usage. In this work, we address the influence of hydrophobic substitution of strong polycations containing quaternary ammonium groups on the polymer-zwitterionic membrane interactions. In particular, we focus on the polymer tendency to adsorb on or/and incorporate into the membrane. We used complementary experimental and computational methods to enhance our understanding of the mechanism of the polycation-membrane interactions. Polycation adsorption on liposomes was assessed using dynamic light scattering (DLS) and zeta potential measurements. The ability of the polymers to form hydrophilic pores in the membrane was evaluated using a calcein-release method. The polymer-membrane interaction at the molecular scale was explored by performing atomistic molecular dynamics (MD) simulations. Our results show that the length of the alkyl side groups plays an essential role in the polycation adhesion on the zwitterionic surface, while the degree of substitution affects the polycation ability to incorporate into the membrane. Both the experimental and computational results show that the membrane permeability can be dramatically affected by the amount of alkyl side groups attached to the polycation main chain.

Polyion complex vesicles (PICsomes) from strong copolyelectrolytes. Stability and in vitro studies.

Polymer vesicles formed by a pair of oppositely charged diblock copolyelectrolytes (PICsomes) are considered as a good alternative to polymersomes formed by amphiphilic copolymers. Here, we report on inherent stability and in vitro biocompatibility of PICsomes prepared from a pair of oppositely charged zwitterionic-ionic copolymers, in which the ionic block is a strong polyelectrolyte. Our results demonstrated that the PICsomes are highly stable over a wide range of pH and temperatures. Direct microscopic observations revealed that the PICsomes retain their morphology in the presence of human serum. In vitro studies using human skin fibroblasts (HSFs) showed that the polymer vesicles are not cytotoxic and do not affect cell proliferation and adhesion. A model hydrophilic dye was effectively incorporated into the PICsomes by simple mixing. Using confocal microscopy observations, we demonstrated that the dye-loaded PICsomes are efficiently internalized by the cells and are located predominantly in endo/lysosomal compartments. Thus, the PICsomes have promising potential for use as nanocontainers for substances of biomedical interest.

Doxorubicin-loaded micelles of amphiphilic diblock copolymer with pendant dendron improve antitumor efficacy: In vitro and in vivo studies.

Previously reported amphiphilic diblock copolymer with pendant dendron moieties (P71D3) has been further evaluated in tumor-bearing mice as a potential drug carrier. This P71D3-based micelle of an average diameter of 100nm was found to be biocompatible, non-toxic and physically stable in colloidal system up to 15days. It enhanced the in vitro potency of doxorubicin (DOX) in 4T1 breast tumor cells by increasing its uptake, by 3-fold, compared to free DOX. In 4T1 tumor-bearing mice, the tumor growth rate of P71D3/DOX (2mg/kg DOX equivalent) treated group was significantly delayed and their tumor volume was significantly reduced by 1.5-fold compared to those treated with free DOX. The biodistribution studies indicated that P71D3/DOX enhanced accumulation of DOX in tumor by 5- and 2-fold higher than free DOX treated mice at 15min and 1h post-administration, respectively. These results suggest that P71D3 micelle is a promising nanocarrier for chemotherapeutic agents.

Photo-induced in situ crosslinking of polymer brushes with dimethyl maleimide moieties for dynamically stimulating stem cell differentiation.

We designed photo-crosslinkable polymer brushes with dimethylmaleimide moieties, in order to demonstrate dynamic stimulation of cell differentiation in mesenchymal stem cells (MSCs). The polymer brushes were synthesized by surface-initiated reversible addition fragmentation chain transfer polymerization using dimethylmaleimide ethyl methacrylate and methyl methacrylate on a chain transfer agent-immobilized glass surface. The polymer brushes were crosslinked by photodimerization of the dimethylmaleimide moieties within polymer chains with stem cells present on the surface. In order to evaluate the effects of in situ photo-induced crosslinking of the polymer brushes on gene expression of stem cells, human bone marrow MSCs were cultured under static and dynamic culture conditions for 7 days. Expression of the osteocalcin (Ocn) gene in MSCs was used as an indicator of osteoblast differentiation under dynamic culture conditions. Structural conversion from non-crosslinked polymer brushes to crosslinked polymer brushes increased the expression of Ocn by 1.4-fold in the presence of adhered cells, compared with non-crosslinked polymer brushes under static culture conditions. These results suggest that MSCs recognized surface conversion from non-crosslinked to crosslinked structures, which resulted in altered differentiation lineages. Therefore, photo-crosslinkable surfaces with dimethyl maleimide moieties are potential novel materials for dynamically stimulating MSC differentiation.

Polyphosphoester-based Paclitaxel Complexes: Biological Evaluation.

BACKGROUND: Polymer drug delivery systems designed to reduce systemic side-effects are clinically important. Polyphosphoesters are biodegradable polymers with versatile structure that could afford reactive sites or polar functions for drug immobilization. MATERIALS AND METHODS: The drug-polyphosphester systems were characterized by nuclear magnetic resonance and infrared spectroscopy, differential scanning calorimetry and dynamic light scattering. In vitro and in vivo experiments were performed to assess the biological activity of the immobilized drug. RESULTS: Two water-soluble polyphosphoester-based delivery systems of paclitaxel were synthesized. The conjugate with paclitaxel covalently bonded to the polymer, had attenuated activity in vitro. The second system comprised of macromolecular aggregates incorporating the drug via hydrogen bonding. The physical complex achieved a certain level of antitumor activity in vivo and no decrease of body weight - evidence for reduction of the systemic toxic effect associated with paclitaxel treatment. CONCLUSION: The physical complex was found to be a promising carrier for delivery of toxic anticancer agents, e.g. paclitaxel.