The adsorption and absorption kinetics of BDE-47 by Chlorella sp. and the role of extracellular polymer substances influenced by environmental factors.

Microalgae act as the entrance of polybrominated diphenyl ethers (PBDEs) from abiotic to biotic environments, which controlled the environmental fate of PBDEs in aquatic environments. Combing with typical coastal environmental characteristics including extracellular polymer substances (EPS) enrichment, light limitation and nitrogen starvation, the changes of adsorption and absorption kinetics of BDE-47 by Chlorella sp. and the role of EPS therein were investigated. The results quantified the adsorption and absorption kinetics of BDE-47 by Chlorella sp. cells and fitted it by the Lagergren pseudo first order model. Furthermore, we found the adsorption and absorption kinetics could be changed by the above mentioned environmental factors. To be specific, the total BDE-47 adsorption amounts per microalgal cell were increased as the increase of ambient EPS (proteins or carbohydrates), attributing to the increase of soluble (SL)-EPS contents; increased total BDE-47 adsorption amounts but decreased absorption rates were found under light limitation and nitrogen starvation, which were attributed to increased bound (B)-EPS contents and protein/carbohydrates (P/C) ratios therein, respectively. Therefore, our study elucidated the adsorption and absorption kinetics of PBDEs by microalgae could be influenced by ambient environmental changes, clarified the roles of SL-EPS, B-EPS contents and P/C ratios, providing a solid basis for evaluating the environmental fate of PBDEs in the marine environments.

Different effecting mechanisms of two sized polystyrene microplastics on microalgal oxidative stress and photosynthetic responses.

Increasing marine microplastics (MPs) pollution potentially threatens the stability of phytoplankton community structures in marine environments. MPs toxicities to microalgae are largely determined by particle size, while the size-dependent mechanisms are still not fully understood. In this study, two sizes (0.1 µm and 1 µm) of polystyrene (PS) MPs were used as experimental targets to systemically compare their different effecting mechanisms on the marine model diatom Thalassiosira pseudonana with respect to oxidative stress and photosynthesis. The results indicated the toxicity of 1 µm sized MPs was higher than 0.1 µm sized MPs regarding to population growth. In condition of similar microalgal population inhibition rates, we found more enhanced cellular oxidative stress and cell death happened in the 1 µm MPs treatments, which could be linked to higher zeta potential of 1 µm MPs and more severe cell surface damage; microalgal surface light shading and cellular pigments decline were more obvious in the 0.1 µm MPs treatment, which could be linked to high aggregation abilities of 0.1 µm MPs. Gene expressions supported the morphological and physiological findings on the transcriptional level. Environmental related MPs concentrations (5 µg L-1) also aroused gene expression changes of T. pseudonana while more changing genes were found under 0.1 µm MPs than 1 µm MPs. These results provide novel insights into the size-dependent mechanisms of MPs toxicity on marine microalgae, as well as their potential influence on the marine environment.

Effects of different concentrations of sodium hypochlorite on dentine adhesion and the recovery application of sodium erythorbate. / ä¸åŒæµ“åº¦æ¬¡æ°¯é ¸é’ å¤„ç†å¯¹ç‰™æœ¬è´¨ç²˜æŽ¥çš„å½±å“åŠå¼‚æŠ—åè¡€é ¸é’ çš„æ¢å¤ä½œç”¨.

OBJECTIVES: Root canal therapy is the most effective and common method for pulpitis and periapical periodontitis. During the root canal preparation, chemical irrigation plays a key role. However, sodium hypochlorite (NaOCl), the widely used irrigation fluid, may impact the bonding strength between dentin and restorative material meanwhile sterilization and dissolving. Therefore, it's important to explore the influence of NaOCl on the adhesion between dentin and restoration materials to ensure clinical efficacy. This study aims to explore the effect of NaOCl on dentine adhesion and evaluate the effect of dentine adhesion induced by sodium erythorbate (ERY), and to provide clinical guidance on dentin bonding after root canal therapy. METHODS: Seventy freshly complete extracted human third molars aged 18-33 years old, without caries and restorations were selected. A diamond saw was used under running water to achieve dentine fragments which were divided into 10 groups with 14 fragments in each group: 2 control [deionized water (DW)±10% ERY] and 8 experimental groups (0.5%, 1%, 2.5%, and 5.25% NaOCl±10% ERY). The dentine specimens in the control group (treated with DW) and the experimental groups (treated with 0.5% NaOCl, 1% NaOCl, 2.5% NaOCl, and 5.25% NaOCl) were immersed for 20 min using corresponding solutions which were renewed every 5 min. The other 5 groups were immersed in 10% ERY for 5 min after an initial washing with DW for 1 min. Then, we selected 4 dentine fragments from all 14 fragments in each group and the numbers and diameters of opening dentinal tubules were observed under scanning electron microscope (SEM). The other 10 dentine fragments from each group were used to make adhesive samples by using self-etch adhesive wand composite resin. All the above adhesive samples were sectioned perpendicular to the bonded interface into 20 slabs with a cross-sectional area of 1 mm×1 mm using a diamond saw under the cooling water, and then the morphology of 10 slabs in each group's bonding interface was observed from aspects of formation of resin tags, depth of tags in dentin, and formation of hybrid layer under SEM. The other 10 slabs of each group's microtensile bond strength and failure modes were also analyzed. RESULTS: Among the 0.5% NaOCl, 1% NaOCl, 2.5% NaOCl, and 5.25% NaOCl groups, the number and diameter of patent dentinal tubules gradually increased with the rise of concentration of NaOCl solution (all P<0.05). Among the DW, 0.5% NaOCl, 1% NaOCl, 2.5% NaOCl, and 5.25% NaOCl groups, the number and diameter of patent dentinal tubules increased after using ERY, but without significant difference (all P>0.05). Among the DW, 0.5% NaOCl, 1% NaOCl, and 2.5% NaOCl groups, the scores of formation of resin tags under SEM gradually increased with the increase of concentration of NaOCl solution, while the score in the 5.25% NaOCl group decreased significantly compared with the score of the 2.5% NaOCl group (P<0.05). There was no significant difference between using 10% ERY groups and without using 10% ERY groups (all P>0.05). The scores of length of the tags under SEM in the 5.25% NaOCl group was significantly higher than the scores of DW, 0.5% NaOCl, and 1% NaOCl groups (all P<0.05), and it was also higher than the score of the 2.5% NaOCl group, but without significant difference (P>0.05). There was no significant difference between using 10% ERY groups and without using 10% ERY groups (P>0.05). The scores of formation of hybrid layer under SEM in the 2.5% NaOCl and 5.25% NaOCl groups significantly decreased compared with the score of the DW group (all P<0.05). There were significant differences between the 2.5% NaOCl±10% ERY groups and between the 5.25% NaOCl±10% ERY groups (all P<0.05). Microtensile bond strength was greater in the 0.5% NaOCl, 1% NaOCl, and 2.5% NaOCl groups, but lower in the 5.25% NaOCl group than that in the DW group (all P<0.05). There were significant differences between the 2.5% NaOCl±10% ERY groups and between the 5.25% NaOCl±10% ERY groups (all P<0.05). The incidence of type "Adhesive" of failure modes in the 5.25% NaOCl group was significantly higher than that in other groups (all P<0.05), while the incidence of type "Adhesive" in the 5.25% NaOCl+10% ERY group was lower than that in the 5.25% NaOCl group (P<0.05). CONCLUSIONS: The bonding strength to dentine increases with the increase of NaOCl concentration when the concentration lower than 2.5%; whereas it is decreased at a higher concentration (such as 5.25%). 10% ERY has a definite recovery effect on attenuated bonding strength to 5.25% NaOCl-treated dentine.

Reactive oxygen species mediated extracellular polymeric substances production assisting the recovery of Thalassiosira pseudonana from polystyrene micro and nanoplastics exposure.

As emerging pollutants in the aquatic environments, micro- and nano-plastics (MNPs) aroused widespread environmental concerns for their potential threats to the ecological health. Previous research has proved that microalgae growth could recover from the MNPs toxicities, in which the extracellular polymeric substances (EPS) might play the key role. In order to comprehensively investigate the recovery process of microalgae from MNPs stress and the effecting mechanisms of EPS therein, this study conducted a series of experiments by employing two sizes (0.1 and 1 µm) of polystyrene (PS) MNPs and the marine model diatom Thalassiosira pseudonana during 14 days. The results indicated: the pigments accumulations and photosynthetic recovery of T. pseudonana under MPs exposure showed in the early stage (4-5 days), while the elevation of reactive oxygen species (ROS) and EPS contents lasted longer time period (7-8 days). EPS was aggregated with MNPs particles and microalgal cells, corresponding to the increased settlement rates. More increase of soluble (SL)-EPS contents was found than bound (B)-EPS under MNPs exposure, in which the increase of the protein proportion and humic acid-like substances in SL-EPS was found, thus facilitating aggregates formation. ROS was the signaling molecule mediating the overproduction of EPS. The transcriptional results further proved the enhanced EPS biosynthesis on the molecular level. Therefore, this study elucidated the recovery pattern of microalgae from MNPs stress and linked "ROS-EPS production changes-aggregation formation" together during the growth recovery process, with important scientific and environmental significance.

Interfacial Design and Construction of Carbon Fiber Composites by Strongly Bound Hydroxyapatite Nanobelt-Carbon Nanotubes for Biological Applications.

Carbon fiber composites are promising candidates for orthopedic implant applications, which calls for a combination of high mechanical strength and outstanding biotribological properties. In this work, hydroxyapatite nanobelts-carbon nanotubes (HN) were designed and constructed into carbon fiber-anhydrous dicalcium phosphate (DCPA)-epoxy composites (CDE) for simultaneously optimizing the mechanical and biotribological properties via the combined methods of pulse electrochemical deposition and injected chemical vapor deposition. HN provides more nucleation sites for the growth of DCPA and favors the infiltration of epoxy. In addition, HN optimizes the fiber/matrix interface by generating strong interfacial mechanical interlocking. Owing to the synergism of a strongly bound HN, the mechanical and biotribological properties of CDE have demonstrated significant improvement. The tensile strength and elastic modulus of HN-modified CDE (HN-CDE) increase by 52 and 170% compared with CDE, respectively. The wear rate and average friction coefficient of HN-CDE are decreased by 42% and increased by 45% compared with those of CDE, respectively. HN-CDE, with superior mechanical strength and biotribological properties, has high potential as a bone substitute and orthopedic implant.

UV-B radiation alleviated detrimental effects of polymethyl methacrylate microplastics on marine diatom Thalassiosira pseudonana.

Microplastics (MPs) in marine environments simultaneously affect microalgae with UV-B radiation, while their joint effecting mechanisms remain largely unknown. To fill this research gap, the joint effects of polymethyl methacrylate (PMMA) MPs and UV-B radiation (natural environments intensity) on the model marine diatom Thalassiosira pseudonana were investigated. Antagonism was found between the two factors with regards to population growth. Furthermore, we found more inhibited population growth and photosynthetic parameters when pre-treated with PMMA MPs compared to pre-treated with UV-B radiation before joint-treated by the two factors. Transcriptional analysis elucidated that UV-B radiation could alleviate the down-regulation of photosynthetic (PSII, cyt b6/f complex and photosynthetic electron transport) and chlorophyll biosynthesis genes caused by PMMA MPs. Besides, the genes encoding carbon fixation and metabolisms was up-regulated under UV-B radiation, which could provide extra energy for the enhanced anti-oxidative activities and DNA replication-repair processes. These consequences showed that the toxicity of PMMA MPs was comprehensively alleviated when T. pseudonana was jointed treated by UV-B radiation. Our results reveled the underlying molecular mechanisms of antagonistic effects between PMMA MPs and UV-B radiation. This study provides important information that environmental factors like UV-B radiation should be considered when accessing the ecological risks of MPs on marine organisms.

The effects of two sized polystyrene nanoplastics on the growth, physiological functions, and toxin production of Alexandrium tamarense.

Micro- and nano-plastics (MNPs) are increasingly prevalent pollutants in marine ecosystems and result in various deleterious effects on marine organisms. There have been studies evaluated the toxic effects of MNPs on marine microalgae, but few of them focused on the effects of MNPs on dinoflagellate species and their toxins production, which could have significant implications on human health and ecological safety in coastal areas. In this study, the common harmful algal blooms-causing dinoflagellate Alexandrium tamarense was exposed to 0.1 and 1 µm sized polystyrene nanoplastics (NPs) to investigate the responding patterns of population growth, multiple physiological functions, as well as the intracellular paralytic shellfish toxins (PSTs) productions. The results indicated the population growth, photosynthetic parameters, nutrients (nitrate and phosphate) uptake rates and extracellular carbonic anhydrase activities (CAext) were all inhibited by the two sized NPs, accompanied by the prolonged and more aggregated microalgal cells under the observation of scanning electron microscope (SEM), and the inhibition effects were more severe under 1 µm sized NPs than 0.1 µm sized NPs. Finally, we found the intracellular PSTs contents increased 73.59% exposed to 0.1 µm sized NPs while decreased 85.50% exposed to 1 µm sized NPs comparing the controls at 96 h, without significant changes of relative compositions. These results provided evidence that MNPs were toxic to A. tamarense and affected their intracellular PSTs productions within 96 h, which is critical to consider when evaluating the potential risks of MNPs in marine ecosystems.