Colorimetric detection of neomycin sulfate in serum based on ultra-small gold nanoparticles with peroxidase-like activity.

Neomycin sulfate (NEO) is a kind of aminoglycoside antibiotics. Because of its strong ototoxicity, nephrotoxicity and other side effects, its content in the body should be strictly monitored during use. In this paper, a rapid colorimetric detection method for NEO based on ultrasmall polyvinylpyrrolidone modified gold nanoparticles (PVP/Au NPs) with peroxidase-like activity was developed. Firstly, ultra small PVP/Au NPs with weak peroxidase-like activity were synthetized. When they were mixed with NEO, strong hydrogen bonds were formed between NEO and PVP, resulting in the aggregation of PVP/Au NPs, and the aggregated PVP/Au NPs showed stronger peroxidase-like activity. Therefore, rapid colorimetric detection of NEO was achieved by utilizing the enhanced peroxidase-like activity mechanism caused by the aggregation of ultra small PVP/Au NPs. The naked eye detection limit of this method is 50 nM. Within the range of 1 nM-300 nM, there was a good linear relationship between NEO concentration and the change in absorbance intensity of PVP/Au NPs-H2O2-TMB solution at 652 nm, with the regression curve of y = 0.0045x + 0.0525 (R2 = 0.998), and the detection limit is 1 nM. In addition, this method was successfully applied to the detection of NEO in mouse serum. The recoveries were 104.4 % -107.6 % compared with HPLC assay results, indicating that this method for NEO detection based on PVP/Au NPs has great potential in actual detection of NEO in serum.

Multifunctional polyaniline modified calcium alginate aerogel membrane with antibacterial, oil-water separation, dye and heavy metal ions removal properties for complex water purification.

With the rapid development of urbanization, the discharge of industrial wastewater has led to increasingly critical water pollution issues. Additionally, heavy metals, organic dyes, microorganisms and oil pollution often coexist and have persistence and harmfulness. Developing materials that can treat these complex pollutants simultaneously has important practical significance. In this study, a calcium alginate-based aerogel membrane (PANI@CA membrane) was prepared by spraying, polymerization, Ca2+ cross-linking and freeze-drying using aniline and sodium alginate as raw materials. Oil-water emulsion can be separated by PANI@CA membrane only under gravity, and the separation efficiency was as high as 99 %. At the same time, the membrane can effectively intercept or adsorb organic dyes and heavy metal ions. The removal rates of methylene blue and Congo red were above 92 % and 63 % respectively even after ten times of cyclic filtration. The removal rate of Pb2+ was up to 95 %. In addition, PANI@CA membrane shows excellent photothermal conversion ability, and it can effectively kill Staphylococcus aureus under 808 nm laser irradiation. PANI@CA membrane has the advantages of low cost, simple preparation, good stability and high recycling ability, and has potential application prospects in wastewater treatment.

Multifunctional PtCuTe Nanosheets with Strong ROS Scavenging and ROS-Independent Antibacterial Properties Promote Diabetic Wound Healing.

Nanozymes, as one of the most efficient reactive oxygen species (ROS)-scavenging biomaterials, are receiving wide attention in promoting diabetic wound healing. Despite recent attempts at improving the catalytic efficiency of Pt-based nanozymes (e.g., PtCu, one of the best systems), they still display quite limited ROS scavenging capacity and ROS-dependent antibacterial effects on bacteria or immunocytes, which leads to uncontrolled and poor diabetic wound healing. Hence, a new class of multifunctional PtCuTe nanosheets with excellent catalytic, ROS-independent antibacterial, proangiogenic, anti-inflammatory, and immuno-modulatory properties for boosting the diabetic wound healing, is reported. The PtCuTe nanosheets show stronger ROS scavenging capacity and better antibacterial effects than PtCu. It is also revealed that the PtCuTe can enhance vascular tube formation, stimulate macrophage polarization toward the M2 phenotype and improve fibroblast mobility, outperforming conventional PtCu. Moreover, PtCuTe promotes crosstalk between different cell types to form a positive feedback loop. Consequently, PtCuTe stimulates a proregenerative environment with relevant cell populations to ensure normal tissue repair. Utilizing a diabetic mouse model, it is demonstrated that PtCuTe significantly facilitated the regeneration of highly vascularized skin, with the percentage of wound closure being over 90% on the 8th day, which is the best among the reported comparable multifunctional biomaterials.

A home-made pipette droplet microfluidics rapid prototyping and training kit for digital PCR, microorganism/cell encapsulation and controlled microgel synthesis.

Droplet microfluidics offers a platform from which new digital molecular assay, disease screening, wound healing and material synthesis technologies have been proposed. However, the current commercial droplet generation, assembly and imaging technologies are too expensive and rigid to permit rapid and broad-range tuning of droplet features/cargoes. This rapid prototyping bottleneck has limited further expansion of its application. Herein, an inexpensive home-made pipette droplet microfluidics kit is introduced. This kit includes elliptical pipette tips that can be fabricated with a simple DIY (Do-It-Yourself) tool, a unique tape-based or 3D printed shallow-center imaging chip that allows rapid monolayer droplet assembly/immobilization and imaging with a smart-phone camera or miniature microscope. The droplets are generated by manual or automatic pipetting without expensive and lab-bound microfluidic pumps. The droplet size and fluid viscosity/surface tension can be varied significantly because of our particular droplet generation, assembly and imaging designs. The versatility of this rapid prototyping kit is demonstrated with three representative applications that can benefit from a droplet microfluidic platform: (1) Droplets as microreactors for PCR reaction with reverse transcription to detect and quantify target RNAs. (2) Droplets as microcompartments for spirulina culturing and the optical color/turbidity changes in droplets with spirulina confirm successful photosynthetic culturing. (3) Droplets as templates/molds for controlled synthesis of gold-capped polyacrylamide/gold composite Janus microgels. The easily fabricated and user-friendly portable kit is hence ideally suited for design, training and educational labs.

PCLLA-nanoHA Bone Substitute Promotes M2 Macrophage Polarization and Improves Alveolar Bone Repair in Diabetic Environments.

The utilization of bioresorbable synthetic bone substitutes with immunomodulatory properties has gained significant attention in dental clinical applications for the absorption of alveolar bone induced by orthodontic treatment. In this study, we developed two distinct materials: a conventional hydroxyapatite (HA) bone powder comprised of hydroxyapatite particles and nanoHA embedded within a poly(caprolactone-co-lactide) (PCLLA) elastomeric matrix. We assessed the physicochemical characteristics of the bone substitute, specifically focusing on its composition and the controlled release of ions. Our findings show that PCLLA-nanoHA has deformable properties under 40 N, and a significant release of Ca and P elements was noted after 7 days in aqueous settings. Moreover, at the protein and gene expression levels, PCLLA-nanoHA enhances the capacity of macrophages to polarize towards an M2 phenotype in vitro. In vivo, PCLLA-nanoHA exhibits comparable effects to standard HA bone powder in terms of promoting alveolar bone regeneration. Extensive investigations reveal that PCLLA-nanoHA surpasses the commonly employed HA bone powder in stimulating bone tissue repair in diabetic mice. We have identified that PCLLA-nanoHA regulates macrophage M2 polarization by activating the PI3K/AKT and peroxisome proliferator-activated receptor gamma (PPAR) signaling pathways, thereby facilitating a favorable local immune microenvironment conducive to bone repair and regeneration. Our findings suggest that PCLLA-nanoHA presents itself as a promising bioresorbable bone substitute with properties that promote macrophage M2 polarization, particularly in the context of regulating the local microenvironment of alveolar bone in diabetic mice, potentially facilitating bone tissue regeneration.

Novel strategy for primary epithelial cell isolation: Combination of hyaluronidase and collagenase I.

OBJECTIVE: Different strategies for epithelial cell isolation significantly affect the viability and physiological properties of primary cells. Trypsin digestion, a conventional method, causes collateral damage owing to its strong digestive potential. To better preserve the physiological properties of epithelial tissues, we aimed to develop a modified method (hyaluronidase and collagenase I combination) for primary cell isolation. METHOD: We used conventional and modified methods to compare cell viability, morphology and stemness. Additionally, we investigated the passaging stability of epithelial cells and their capacity for organoid formation. Finally, we compared the two methods for isolating urothelial, oesophageal, lingual, and epidermal epithelial cells. RESULT: Gingival epithelial cells obtained using the modified method had higher viability, better morphology and stronger stemness than those obtained using the conventional method. Additionally, primary cells obtained using the modified method were stably passaged. Regarding organoid culture, adopting the modified method led to a significant increase in the growth rate and expression of the stem cell markers cytokeratin (CK)-19 and Ki-67. Furthermore, the modified method outperformed the conventional method for isolating urothelial, epidermal, oesophageal and lingual epithelial cells. CONCLUSION: We demonstrated that the combination of hyaluronidase and collagenase I outperformed trypsin in preserving the physiological properties of primary cells and organoid formation. The modified method could be broadly applied to isolate different types of epithelial cells and facilitate studies on organoids and tissue engineering.

Preparation, physicochemical characterization, and in vitro and in vivo osteogenic evaluation of a bioresorbable, moldable, hydroxyapatite/poly(caprolactone-co-lactide) bone substitute.

Use of bioresorbable artificial bone substitutes is anticipated for bone augmentation in dental implant surgery because they are relatively economical and uniform in quality compared to heterogeneous bone. In this study, a new shapable, rubbery, bioresorbable bone substitute was developed. The material was prepared by ultrasonically dispersing hydroxyapatite (HA) particles throughout a poly (caprolactone-co-lactide) (PCLLA) rubbery matrix. Physiochemical properties of the bone substitute including its composition, deformability, anti-collapse ability, degradation behavior, and in vitro and in vivo osteogenic ability were evaluated. Results revealed that HA/PCLLA, which consists of homogeneously dispersed HA particles and a rubbery matrix composed of PCLLA, possesses a deformable capacity. The result of the mass retention rate of the material indicated an excellent durability in an aqueous environment. Further, the effects of HA/PCLLA on cell functions and bone-regenerated performance were evaluated in vitro and in vivo. The results showed that HA/PCLLA had enhanced proliferative capacity, and ability to undergo osteogenic differentiation and mineralization in vitro. It was also found that HA/PCLLA had an appropriate degradation rate to induce consecutive new bone formation without collapse at the early stage in vivo, as well as the ability to maintain the contour of the bone-grafting area, which is comparable to the deproteinized bovine bone mineral. These results indicated that HA/PCLLA is a promising bioresorbable bone substitute with properties that meet clinical requirements, including deformability, resistance to collapse in an aqueous environment, appropriate early-stage degradation rate, biocompatibility, osteogenic bioactivity and the capacity to regenerate bone tissue with favorable contour.

In situ activation of flexible magnetoelectric membrane enhances bone defect repair.

For bone defect repair under co-morbidity conditions, the use of biomaterials that can be non-invasively regulated is highly desirable to avoid further complications and to promote osteogenesis. However, it remains a formidable challenge in clinical applications to achieve efficient osteogenesis with stimuli-responsive materials. Here, we develop polarized CoFe2O4@BaTiO3/poly(vinylidene fluoridetrifluoroethylene) [P(VDF-TrFE)] core-shell particle-incorporated composite membranes with high magnetoelectric conversion efficiency for activating bone regeneration. An external magnetic field force conduct on the CoFe2O4 core can increase charge density on the BaTiO3 shell and strengthens the ß-phase transition in the P(VDF-TrFE) matrix. This energy conversion increases the membrane surface potential, which hence activates osteogenesis. Skull defect experiments on male rats showed that repeated magnetic field applications on the membranes enhanced bone defect repair, even when osteogenesis repression is elicited by dexamethasone or lipopolysaccharide-induced inflammation. This study provides a strategy of utilizing stimuli-responsive magnetoelectric membranes to efficiently activate osteogenesis in situ.

Ruminal Microbiota Determines the High-Fiber Utilization of Ruminants: Evidence from the Ruminal Microbiota Transplant.

The rumen, which contains a series of prokaryotes and eukaryotes with high abundance, determines the high ability to degrade complex carbohydrates in ruminants. Using 16S rRNA gene sequencing, we compared the ruminal microbiota of dairy goats with that in the foregut and colon of mice and found more Bacteroides identified in the rumen, which helps ruminants to utilize plant-derived polysaccharides, cellulose, and other structural carbohydrates. Furthermore, high-fiber diets did not significantly increase intestinal fiber-degrading bacteria in mice, but did produce higher levels of ruminal fiber-degrading bacteria in dairy goats. Through rumen microbe transplantation (RMT), we found that rumen-derived fiber-degrading bacteria can colonize the intestines of mice to exert their fiber-degrading function, but their colonization efficiency is affected by diet. Additionally, the colonization of these fiber-degrading bacteria in the colon may involve higher content of butyrate in the colon, protecting the colonic epithelial barrier and promoting energy metabolism. Overall, the fiber degradation function of rumen bacteria through RMT was verified, and our results provide new insights into isolating the functional and beneficial fiber-degrading bacteria in the rumen, providing a theoretical basis for the role of dietary fiber in intestinal health. IMPORTANCE Ruminants have a powerful progastric digestive system that converts structural carbohydrates into nutrients useful to humans. It is well known that this phenomenon is due to the fact that the rumen of ruminants is a natural microbial fermenter, which can ferment structural carbohydrates such as cellulose and hemicellulose and transform them into volatile fatty acids to supply energy for host. However, monogastric animals have an inherent disadvantage in utilizing fiber, so screening rumen-derived fiber-degrading bacteria as a fermentation strain for biological feed is needed in an attempt at improving the fiber digestibility of monogastric animals. In this study, a ruminal microbiota transplant experiment from goats to mice proves that ruminal microbiota could serve as a key factor in utilization of high-fiber diets and provides a new perspective for the development of probiotics with fiber degradation function from the rumen and the importance of the use of prebiotics during the intake of probiotics.

Bionic design and verification of 3D printed PEEK costal cartilage prosthesis.

Chest wall reconstructions are mainly needed after surgical treatment of tumors or trauma. The costal cartilage is part of the chest wall, connecting sternum and ribs. The currently existing rib prostheses made of Titanium or PEEK were found lacking the costal cartilage portion, causing unsatisfactory functional rehabilitation of breath. This study proposed a newly bionic methodology for designing a costal cartilage prosthesis using a wavy elastic structure. By changing the design parameters, the mechanical properties can be accurately adjusted. Finite element analysis was carried out for the optimization of the prostheses. Then the prostheses were fabricated by fused deposition modelling manufacturing technology, using PEEK. Mechanical tests were carried out to determine the elastic modulus of the prostheses. The equivalent modulus ranged 0.5-17.3 MPa, and the tensile strength ranged 0.7-8.3 MPa. The results indicated that the mechanical behavior of the designed prostheses were close to those of the natural costal cartilage and that the wavy elastic structure was a reasonable choice for designing a costal cartilage prosthesis. Therefore, the designed PEEK costal cartilage prostheses have the potential as replacement of the natural costal cartilage with better breathing function for the patient undergoing chest wall reconstruction.

Modulating Surface Potential by Controlling the ß Phase Content in Poly(vinylidene fluoridetrifluoroethylene) Membranes Enhances Bone Regeneration.

Bioelectricity plays a vital role in living organisms. Although electrical stimulation is introduced in the field of bone regeneration, the concept of a dose-response relationship between surface potential and osteogenesis is not thoroughly studied. To optimize the osteogenic properties of different surface potentials, a flexible piezoelectric membrane, poly(vinylidene fluoridetrifluoroethylene) [P(VDF-TrFE)], is fabricated by annealing treatment to control its ß phases. The surface potential and piezoelectric coefficients (d33 ) of the membranes can be regulated by increasing ß phase contents. Compared with d33  = 20 pC N-1 (surface potential = -78 mV) and unpolarized membranes, bone marrow mesenchymal stem cells (BM-MSCs) cultured on the d33  = 10 pC N-1 (surface potential = -53 mV) membranes have better osteogenic properties. In vivo, d33  = 10 pC N-1 membranes result in rapid bone regeneration and complete mature bone-structure formation. BM-MSCs on d33  = 10 pC N-1 membranes have the lowest reactive oxygen species level and the highest mitochondrial membrane electric potential, implying that these membranes provide the best electrical qunantity for BM-MSCs' proliferation and energy metabolism. This study establishes an effective method to control the surface potential of P(VDF-Trfe) membranes and highlights the importance of optimized electrical stimulation in bone regeneration.

Thickness-Gradient Films for High Gauge Factor Stretchable Strain Sensors.

High-gauge-factor stretchable strain sensors are developed by utilizing a new strategy of thickness-gradient films with high durability, and high uniaxial/isotropic stretchability based on the self-pinning effect of SWCNTs. The monitoring of detailed damping vibration modes driven by weak sound based on such sensors is demonstrated, making a solid step toward real applications.

Graphene nanoribbons as an advanced precursor for making carbon fiber.

Graphene oxide nanoribbons (GONRs) and chemically reduced graphene nanoribbons (crGNRs) were dispersed at high concentrations in chlorosulfonic acid to form anisotropic liquid crystal phases. The liquid crystal solutions were spun directly into hundreds of meters of continuous macroscopic fibers. The relationship of fiber morphology to coagulation bath conditions was studied. The effects of colloid concentration, annealing temperature, spinning air gap, and pretension during annealing on the fibers' performance were also investigated. Heat treatment of the as-spun GONR fibers at 1500 °C produced thermally reduced graphene nanoribbon (trGNR) fibers with a tensile strength of 378 MPa, Young's modulus of 36.2 GPa, and electrical conductivity of 285 S/cm, which is considerably higher than that in other reported graphene-derived fibers. This better trGNR fiber performance was due to the air gap spinning and annealing with pretension that produced higher molecular alignment within the fibers, as determined by X-ray diffraction and scanning electron microscopy. The specific modulus of trGNR fibers is higher than that of the commercial general purpose carbon fibers and commonly used metals such as Al, Cu, and steel. The properties of trGNR fibers can be further improved by optimizing the spinning conditions with higher draw ratio, annealing conditions with higher pretensions, and using longer flake GONRs. This technique is a new high-carbon-yield approach to make the next generation carbon fibers based on solution-based liquid crystal phase spinning.

Targeted delivery of non-viral vectors to cartilage in vivo using a chondrocyte-homing peptide identified by phage display.

Gene therapy is a promising method for osteoarthritis and cartilage injury. However, specifically delivering target genes into chondrocytes is a great challenge because of their non-vascularity and the dense extracellular matrix of cartilage. In our study, we identified a chondrocyte-affinity peptide (CAP, DWRVIIPPRPSA) by phage display technology. Subsequent analysis suggests that the peptide can efficiently interact specifically with chondrocytes without any species specificity. Polyethylenimine (PEI) was covalently modified with CAP to construct a non-viral vector for cartilage-targeted therapy. To investigate the cartilage-targeting property of the CAP-modified vector, FITC-labeled CAP conjugated PEI/DNA particles were injected into rabbit knee joints, and visualized under confocal microscope. Higher concentrations of CAP-modified vector were detected in the cartilage and specifically taken up by chondrocytes compared with a randomly scrambled peptide (SP)-modified vector. To evaluate cartilage-targeting transfection efficiency, the GFP and luciferase genes were delivered into knee joints using CAP- and SP-modified PEI. Cartilage transfections mediated by CAP-modified PEI were much more efficient and specific than those by SP-modified PEI. This result suggests that CAP-modified PEI could be used as a specific cartilage-targeting vector for cartilage disorders.