Melt-electrowriting-enabled anisotropic scaffolds loaded with valve interstitial cells for heart valve tissue Engineering.

Tissue engineered heart valves (TEHVs) demonstrates the potential for tissue growth and remodel, offering particular benefit for pediatric patients. A significant challenge in designing functional TEHV lies in replicating the anisotropic mechanical properties of native valve leaflets. To establish a biomimetic TEHV model, we employed melt-electrowriting (MEW) technology to fabricate an anisotropic PCL scaffold. By integrating the anisotropic MEW-PCL scaffold with bioactive hydrogels (GelMA/ChsMA), we successfully crafted an elastic scaffold with tunable mechanical properties closely mirroring the structure and mechanical characteristics of natural heart valves. This scaffold not only supports the growth of valvular interstitial cells (VICs) within a 3D culture but also fosters the remodeling of extracellular matrix of VICs. The in vitro experiments demonstrated that the introduction of ChsMA improved the hemocompatibility and endothelialization of TEHV scaffold. The in vivo experiments revealed that, compared to their non-hydrogel counterparts, the PCL-GelMA/ChsMA scaffold, when implanted into SD rats, significantly suppressed immune reactions and calcification. In comparison with the PCL scaffold, the PCL-GelMA/ChsMA scaffold exhibited higher bioactivity and superior biocompatibility. The amalgamation of MEW technology and biomimetic design approaches provides a new paradigm for manufacturing scaffolds with highly controllable microstructures, biocompatibility, and anisotropic mechanical properties required for the fabrication of TEHVs.

Universal and One-Step Modification to Render Diverse Materials Bioactivation.

Bioactive materials that can support cell adhesion and tissue regeneration are greatly in demand in clinical applications. Surface modification with bioactive molecules is an efficient strategy to convert conventional bioinert materials into bioactive materials. However, there is an urgent need to find a universal and one-step modification strategy to realize the above transformation for bioactivation. In this work, we report a universal and one-step modification strategy to easily modify and render diverse materials bioactivation by dipping materials into the solution of dibutylamine-DOPA-lysine-DOPA (DbaYKY) tripeptide-terminated cell-adhesive molecules, ß-peptide polymer, or RGD peptide for only 5 min. This strategy provides materials with a stable surface modification layer and does not cause an undesired surface color change like the widely used polydopamine coating. This one-step strategy can endow material surfaces with cell adhesion properties without concerns on nonspecific conjugation of proteins and macromolecules. This universal and one-step surface bioactivation strategy implies a wide range of applications in implantable biomaterials.

Uncovering the Optimal Molecular Characteristics of Hydrophobe-Containing Polypeptoids to Induce Liposome or Cell Membrane Fragmentation.

Cellular functions of membrane proteins are strongly coupled to their structures and aggregation states in the cellular membrane. Molecular agents that can induce the fragmentation of lipid membranes are highly sought after as they are potentially useful for extracting membrane proteins in their native lipid environment. Toward this goal, we investigated the fragmentation of synthetic liposome using hydrophobe-containing polypeptoids (HCPs), a class of facially amphiphilic pseudo-peptidic polymers. A series of HCPs with varying chain lengths and hydrophobicities have been designed and synthesized. The effects of polymer molecular characteristics on liposome fragmentation are systemically investigated by a combination of light scattering (SLS/DLS) and transmission electron microscopy (cryo-TEM and negative stained TEM) methods. We demonstrate that HCPs with a sufficient chain length (DPn ≈ 100) and intermediate hydrophobicity (PNDG mol % = 27%) can most effectively induce the fragmentation of liposomes into colloidally stable nanoscale HCP-lipid complexes owing to the high density of local hydrophobic contact between the HCP polymers and lipid membranes. The HCPs can also effectively induce the fragmentation of bacterial lipid-derived liposomes and erythrocyte ghost cells (i.e., empty erythrocytes) to form nanostructures, highlighting the potential of HCPs as novel macromolecular surfactants toward the application of membrane protein extraction.

pH-Dependent Solution Micellar Structure of Amphoteric Polypeptoid Block Copolymers with Positionally Controlled Ionizable Sites.

While solution micellization of ionic block copolymers (BCP) with randomly distributed ionization sites along the hydrophilic segments has been extensively studied, the roles of positionally controlled ionization sites along the BCP chains in their micellization and resulting micellar structure remain comparatively less understood. Herein, three amphoteric polypeptoid block copolymers carrying two oppositely charged ionizable sites, with one fixed at the hydrophobic terminus and the other varyingly positioned along the hydrophilic segment, have been synthesized by sequential ring-opening polymerization method. The presence of the ionizable site at the hydrophobic segment terminus is expected to promote polymer association toward equilibrium micellar structures in an aqueous solution. The concurrent presence of oppositely charged ionizable sites on the polymer chains allows the polymer association to be electrostatically modulated in a broad pH range (ca. 2-12). Micellization of the amphoteric polypeptoid BCP in dilute aqueous solution and the resulting micellar structure at different solution pHs was investigated by a combination of scattering and microscopic methods. Negative-stain transmission-electron microscopy (TEM), small-angle neutron scattering (SANS), and small-angle X-ray scattering (SAXS) analyses revealed the dominant presence of core-shell-type spherical micelles and occasional rod-like micelles with liquid crystalline (LC) domains in the micellar core. The micellar structures (e.g., aggregation number, radius of gyration, chain packing in the micelle) were found to be dependent on the solution pH and the position of the ionizable site along the chain. This study has highlighted the potential of controlling the position of ionizable sites along the BCP polymer to modulate the electrostatic and LC interactions, thus tailoring the micellar structure at different solution pH values in water.

Micropatterned Hydrogels with Highly Ordered Cellulose Nanocrystals for Visually Monitoring Cardiomyocytes.

Cardiac microphysiological systems are accurate in vitro platforms that reveal the biological mechanisms underlying cardiopathy, accelerating pharmaceutical research in this field. Current cardiac microphysiological devices and organs-on-chips consist of several layers prepared with complex, multi-step processes. Incorporating inorganic photonic crystals may cause long-term biocompatibility issues. Herein, micropatterned hydrogels with anisotropic structural colors are prepared by locking shear-oriented tunicate cellulose nanocrystals (TCNCs) in hydrogel networks through in situ polymerization, allowing the visualization and monitoring of cardiomyocytes. The anisotropic hydrogels are composed of highly ordered TCNCs with bright interference color and micro-grooved methacrylated gelatin with excellent biocompatibility. The microgroove patterns induce cardiomyocyte alignment and the autonomous beating of cardiomyocytes causes the hydrogels to deform, dynamically shifting the interference color. These micropatterned hydrogels could noninvasively monitor real-time changes of cardiomyocytes under pharmaceutical treatment and electrical stimulation through wavelength shifts in the transmittance spectra. This system provides a new way to detect the beat rate of cardiac tissue and it may contribute to high throughput develop.

Modulating the Molecular Geometry and Solution Self-Assembly of Amphiphilic Polypeptoid Block Copolymers by Side Chain Branching Pattern.

Solution self-assembly of coil-crystalline diblock copolypeptoids has attracted increasing attention due to its capability to form hierarchical nanostructures with tailorable morphologies and functionalities. While the N-substituent (or side chain) structures are known to affect the crystallization of polypeptoids, their roles in dictating the hierarchical solution self-assembly of diblock copolypeptoids are not fully understood. Herein, we designed and synthesized two types of diblock copolypeptoids, i.e., poly(N-methylglycine)-b-poly(N-octylglycine) (PNMG-b-PNOG) and poly(N-methylglycine)-b-poly(N-2-ethyl-1-hexylglycine) (PNMG-b-PNEHG), to investigate the influence of N-substituent structure on the crystalline packing and hierarchical self-assembly of diblock copolypeptoids in methanol. With a linear aliphatic N-substituent, the PNOG blocks pack into a highly ordered crystalline structure with a board-like molecular geometry, resulting in the self-assembly of PNMG-b-PNOG molecules into a hierarchical microflower morphology composed of radially arranged nanoribbon subunits. By contrast, the PNEHG blocks bearing bulky branched aliphatic N-substituents are rod-like and prefer to stack into a columnar hexagonal liquid crystalline mesophase, which drives PNMG-b-PNEHG molecules to self-assemble into symmetrical hexagonal nanosheets in solution. A combination of time-dependent small/wide-angle X-ray scattering and microscopic imaging analysis further revealed the self-assembly mechanisms for the formation of these microflowers and hexagonal nanosheets. These results highlight the significant impact of the N-substituent architecture (i.e., linear versus branched) on the supramolecular self-assembly of diblock copolypeptoids in solution, which can serve as an effective strategy to tune the geometry and hierarchical structure of polypeptoid-based nanomaterials.

Impact of Antifouling PEG Layer on the Performance of Functional Peptides in Regulating Cell Behaviors.

Cell adhesive and other functional peptides (such as RGD, KRSR, YIGSR, VAPG, and BMP-2 peptides) are extensively studied and utilized in tissue engineering scaffolds and biomedical devices to modulate cell functions. Though PEG is frequently used as the antifouling layer, it is unclear how it affects the performance of functional peptides. By analyzing the impact of PEG at short (OEG4), medium (OEG8), and long chain length (PEG2K), we reveal that PEG chain length is critical and a medium-length PEG enables functional peptides to display their optimal and genuine functions in cell adhesion, migration, and differentiation by providing excellent antifouling to minimize background noise of unwanted cell adhesion and high enough surface density of functional peptides. Our result provides new avenues for maximizing the genuine functions of peptides. This study also provides a solution to prevent the heterogeneous and even divergent results caused by inappropriate choice of antifouling PEG and provides a general guidance in identifying new functional peptides.

Amphiphilic Polypeptoids Rupture Vesicle Bilayers To Form Peptoid-Lipid Fragments Effective in Enhancing Hydrophobic Drug Delivery.

Peptoids are highly biocompatible pseudopeptidic polyglycines with designable substituents on the nitrogen atoms. The therapeutic and drug-carrying potential of these materials requires a fundamental understanding of their interactions with lipid bilayers. In this work, we use amphiphilic polypeptoids with up to 100 monomeric units where a significant fraction (26%) of the nitrogen atoms are functionalized with decyl groups (hydrophobes) that insert into the lipid bilayer through the hydrophobic effect. These hydrophobically modified polypeptoids (HMPs) insert their hydrophobes into lipid bilayers creating instabilities that lead to the rupture of vesicles. At low HMP concentrations, such rupture leads to the creation of large fragments which remarkably anchor to intact vesicles through the hydrophobic effect. At high HMP concentrations, all vesicles rupture to smaller HMP-lipid fragments of the order of 10 nm. We show that the technique for such nanoscale polymer-lipid fragments can be exploited to sustain highly hydrophobic drug species in solution. Using the kinase inhibitor, Sorafenib as a model drug, it is shown that HMP-lipid fragments containing the drug can efficiently enter a hepatocellular carcinoma cell line (Huh 7.5), indicating the use of such fragments as drug delivery nanocarriers.

Amphiphilic Polypeptoids Serve as the Connective Glue to Transform Liposomes into Multilamellar Structures with Closely Spaced Bilayers.

We report the ability of hydrophobically modified polypeptoids (HMPs), which are amphiphilic pseudopeptidic macromolecules, to connect across lipid bilayers and thus form layered structures on liposomes. The HMPs are obtained by attaching hydrophobic decyl groups at random points along the polypeptoid backbone. Although native polypeptoids (with no hydrophobes) have no effect on liposomal structure, the HMPs remodel the unilamellar liposomes into structures with comparable diameters but with multiple concentric bilayers. The transition from single-bilayer to multiple-bilayer structures is revealed by small-angle neutron scattering (SANS) and cryo-transmission electron microscopy (cryo-TEM). The spacing between bilayers is found to be relatively uniform at ∼6.7 nm. We suggest that the amphiphilic nature of the HMPs explains the formation of multibilayered liposomes; i.e., the HMPs insert their hydrophobic tails into adjacent bilayers and thereby serve as the connective glue between bilayers. At higher HMP concentrations, the liposomes are entirely disrupted into much smaller micellelike structures through extensive hydrophobe insertion. Interestingly, these small structures can reattach to fresh unilamellar liposomes and self-assemble to form new two-bilayer liposomes. The two-bilayer liposomes in our study are reminiscent of two-bilayer organelles such as the nucleus in eukaryotic cells. The observations have significance in designing new nanoscale drug delivery carriers with multiple drugs on separate lipid bilayers and extending liposome circulation times with entirely biocompatible materials.

Synthesis and Characterization of Well-Defined PEGylated Polypeptoids as Protein-Resistant Polymers.

Well-defined polypeptoids bearing oligomeric ethylene glycol side chains (PNMe(OEt)nG, n = 1-3) with a controlled molecular weight (3.26-28.6 kg/mol) and narrow molecular weight distribution (polydispersity index, PDI = 1.03-1.10) have been synthesized by ring-opening polymerization of the corresponding N-carboxyanhydrides having oligomeric ethylene glycol side chains (Me(OEt)n-NCA, n = 1-3) using primary amine initiators. Kinetic studies of polymerization revealed a first-order dependence on the monomer concentration, consistent with living polymerization. The obtained PEGylated polypeptoids are highly hydrophilic with good water solubility (>200 mg/mL) and are amorphous, with a glass transition temperature in the -41.1 to +46.4 °C range that increases with increasing molecular weight and decreasing side chain length. DLS and SANS analyses revealed no appreciable adsorption of lysozyme to PNMeOEtG. PNMeOEtG having different molecular weights exhibited minimal cytotoxicity toward HEp2 cells. These combined results suggest the potential use of PEGylated polypeptoids as protein-resistant materials in biomedical and biotechnological fields.

Unusual molecular mechanism behind the thermal response of polypeptoids in aqueous solutions.

Poly(α-peptoid)s, a structural isomer to polypeptides, have recently attracted a significant amount of scientific attention. However, the molecular mechanism behind the thermal response of this class of polymers is unknown. Here, the thermal response of two polypeptoids in aqueous solutions was studied by different methodologies, including dynamic light scattering, IR spectroscopies, NMR, etc. Our studies focused on two polypeptoids with identical alkyl side chain compositions, but different architecture; i.e., cyclic and linear. Aqueous solutions of the cyclic and linear polymers present phase transition temperatures at 43 °C and 47 °C, respectively, that have an anomalous dependence on the polymer morphology as expected from macromolecules having very similar solvent interactions, but different conformational entropy. The atypical trend in the phase transition temperature is found to be caused by the initiator required in the synthesis which favors the formation of soluble dimers in the cyclic polymer. Our experimental findings also demonstrate that the phase transition, irrespective of the morphology, is governed by the polymer backbone conformation which depends on the composition and structure of the alkyl side chains. This proposed mechanism is novel and different from the commonly assumed mechanism for thermo-responsive polymers in which the hydration of the polymer cause by a coil to globule transition is the determining factor. Moreover, the proposed mechanism is likely to be general since it can explain not only the experimental findings of this work, but also observations of the thermal response and conformation of other studied polypeptoids in water. Finally, our mechanism gives a molecular framework for the rational designed of polypeptoids with tailored phase transition temperatures.

A Polymeric Strategy Empowering Vascular Cell Selectivity and Potential Application Superior to Extracellular Matrix Peptides.

Endothelialization of vascular implants plays a vital role in maintaining the long-term vascular patency. In situ endothelialization and re-endothelialization is generally achieved by selectively promoting endothelial cell (EC) adhesion and, meanwhile, suppressing smooth muscle cell (SMC) adhesion. Currently, such EC versus SMC selectivity is achieved and extensively used in vascular-related biomaterials utilizing extracellular-matrix-derived EC-selective peptides, dominantly REDV and YIGSR. Nevertheless, the application of EC-selective peptides is limited due to their easy proteolysis, time-consuming synthesis, and expensiveness. To address these limitations, a polymeric strategy in designing and finding EC-selective biomaterials using amphiphilic ß-peptide polymers by tuning serum protein adsorption is reported. The optimal ß-peptide polymer displays EC versus SMC selectivity even superior to EC-selective REDV peptide regarding cell adhesion, proliferation, and migration of ECs versus SMCs. Study of the mechanism indicates that surface adsorption of bovine serum albumin, an abundant and anti-adhesive serum protein, plays a critical role in the ECs versus SMCs selectivity of ß-peptide polymer. In addition, surface modification of the optimal ß-peptide polymer effectively promotes the endothelialization of vascular implants and inhibits intimal hyperplasia. This study provides an alternative strategy in designing and finding EC-selective biomaterials, implying great potential in the vascular-related biomaterial study and application.

Microbial Metabolite Inspired ß-Peptide Polymers Displaying Potent and Selective Antifungal Activity.

Potent and selective antifungal agents are urgently needed due to the quick increase of serious invasive fungal infections and the limited antifungal drugs available. Microbial metabolites have been a rich source of antimicrobial agents and have inspired the authors to design and obtain potent and selective antifungal agents, poly(DL-diaminopropionic acid) (PDAP) from the ring-opening polymerization of ß-amino acid N-thiocarboxyanhydrides, by mimicking ε-poly-lysine. PDAP kills fungal cells by penetrating the fungal cytoplasm, generating reactive oxygen, and inducing fungal apoptosis. The optimal PDAP displays potent antifungal activity with minimum inhibitory concentration as low as 0.4 µg mL-1 against Candida albicans, negligible hemolysis and cytotoxicity, and no susceptibility to antifungal resistance. In addition, PDAP effectively inhibits the formation of fungal biofilms and eradicates the mature biofilms. In vivo studies show that PDAP is safe and effective in treating fungal keratitis, which suggests PDAPs as promising new antifungal agents.

Dual mechanism ß-amino acid polymers promoting cell adhesion.

Cell adhesion has tremendous impact on the function of culture platforms and implants. Cell-adhesive proteins and peptides have been extensively used for decades to promote cell adhesion, however, their application suffers from their easy enzymatic degradation, difficulty in large-scale preparation and expensiveness. To develop the next-generation cell-adhesive materials, we mimic the cell adhesion functions and mechanisms of RGD and KRSR peptides and design cell-adhesive cationic-hydrophobic amphiphilic ß-amino acid polymers that are stable upon proteolysis and easily prepared in large scale at low cost. The optimal polymer strongly promotes cell adhesion, using preosteoblast cell as a model, by following dual mechanisms that are independent of sequence and chirality of the statistic copolymer. Our strategy opens avenues in designing the next-generation cell-adhesive materials and may guide future studies and applications.

The impact of antifouling layers in fabricating bioactive surfaces.

Bioactive surfaces modified with functional peptides are critical for both fundamental research and practical application of implant materials and tissue repair. However, when bioactive molecules are tethered on biomaterial surfaces, their functions can be compromised due to unwanted fouling (mainly nonspecific protein adsorption and cell adhesion). In recent years, researchers have continuously studied antifouling strategies to obtain low background noise and effectively present the function of bioactive molecules. In this review, we describe several commonly used antifouling strategies and analyzed their advantages and drawbacks. Among these strategies, antifouling molecules are widely used to construct the antifouling layer of various bioactive surfaces. Subsequently, we summarize various structures of antifouling molecules and their surface grafting methods and characteristics. Application of these functionalized surfaces in microarray, biosensors, and implants are also introduced. Finally, we discuss the primary challenges associated with antifouling layers in fabricating bioactive surfaces and provide prospects for the future development of this field. STATEMENT OF SIGNIFICANCE: The nonspecific protein adsorption and cell adhesion will cause unwanted background "noise" on the surface of biological materials and detecting devices and compromise the performance of functional molecules and, therefore, impair the performance of materials and the sensitivity of devices. In addition, the selection of antifouling surfaces with proper chain length and high grafting density is also of great importance and requires further studies. Otherwise, the surface-tethered bioactive molecules may not function in their optimal status or even fail to display their functions. Based on these two critical issues, we summarize antifouling molecules with different structures, variable grafting methods, and diverse applications in biomaterials and biomedical devices reported in literature. Overall, we expect to shed some light on choosing the appropriate antifouling molecules in fabricating bioactive surfaces.

Hydrophobe Containing Polypeptoids Complex with Lipids and Induce Fusogenesis of Lipid Vesicles.

The hydrophobic effect of alkyl group insertion into phospholipid bilayers is exploited in modifying and modulating vesicle structure. We show that amphiphilic polypeptoids (peptide mimics) with n-decyl side chains, which we term as hydrophobe-containing polypeptoids (HCPs), can insert the alkyl hydrophobes into the membrane bilayer of phospholipid-based vesicles. Such insertion leads to disruption of the liposomes and the formation of HCP-lipid complexes that are colloidally stable in aqueous solution. Interestingly, when these complexes are added to fresh liposomes, remnant uncomplexed hydrophobes (the n-decyl groups) bridge liposomes and fuse them. The fusion leads to the engulfing of liposomes and the formation of multilayered vesicles. The morphology of the liposome system can be changed from stopping fusion and forming clustered vesicles to the continued formation of multilayered liposomes simply by controlling the amount of the HCP-lipid complex added. The entire procedure occurs in aqueous systems without the addition of any other solvents. There are several implications to these observations including the biological relevance of mimicking fusogenic proteins such as the SNARE proteins and the development of new drug delivery technologies to impact delivery to cell organelles.

Bio-inspired poly-DL-serine materials resist the foreign-body response.

Implantation-caused foreign-body response (FBR) is a commonly encountered issue and can result in failure of implants. The high L-serine content in low immunogenic silk sericin, and the high D-serine content as a neurotransmitter together inspire us to prepare poly-DL-serine (PSer) materials in mitigating the FBR. Here we report highly water soluble, biocompatible and easily accessible PSer hydrogels that cause negligible inflammatory response after subcutaneous implantation in mice for 1 week and 2 weeks. No obvious collagen capsulation is found surrounding the PSer hydrogels after 4 weeks, 3 months and 7 months post implantation. Histological analysis on inflammatory cytokines and RNA-seq assay both indicate that PSer hydrogels show low FBR, comparable to the Mock group. The anti-FBR performance of PSer hydrogels at all time points surpass the poly(ethyleneglycol) hydrogels that is widely utilized as bio-inert materials, implying the potent and wide application of PSer materials in implantable biomaterials and biomedical devices.

A sandcastle worm-inspired strategy to functionalize wet hydrogels.

Hydrogels have been extensively used in many fields. Current synthesis of functional hydrogels requires incorporation of functional molecules either before or during gelation via the pre-organized reactive site along the polymer chains within hydrogels, which is tedious for polymer synthesis and not flexible for different types of hydrogels. Inspired by sandcastle worm, we develop a simple one-step strategy to functionalize wet hydrogels using molecules bearing an adhesive dibutylamine-DOPA-lysine-DOPA tripeptide. This tripeptide can be easily modified with various functional groups to initiate diverse types of polymerizations and provide functional polymers with a terminal adhesive tripeptide. Such functional molecules enable direct modification of wet hydrogels to acquire biological functions such as antimicrobial, cell adhesion and wound repair. The strategy has a tunable functionalization degree and a stable attachment of functional molecules, which provides a tool for direct and convenient modification of wet hydrogels to provide them with diverse functions and applications.

Recycle the dental fairy's package: overview of dental pulp stem cells.

Adult stem cells are excellent cell resource for cell therapy and regenerative medicine. Dental pulp stem cells (DPSCs) have been discovered and well known in various application. Here, we reviewed the history of dental pulp stem cell study and the detail experimental method including isolation, culture, cryopreservation, and the differentiation strategy to different cell lineage. Moreover, we discussed the future potential application of the combination of tissue engineering and of DPSC differentiation. This review will help the new learner to quickly get into the DPSC filed.

Artificial Cardiac Muscle with or without the Use of Scaffolds.

During the past several decades, major advances and improvements now promote better treatment options for cardiovascular diseases. However, these diseases still remain the single leading cause of death worldwide. The rapid development of cardiac tissue engineering has provided the opportunity to potentially restore the contractile function and retain the pumping feature of injured hearts. This conception of cardiac tissue engineering can enable researchers to produce autologous and functional biomaterials which represents a promising technique to benefit patients with cardiovascular diseases. Such an approach will ultimately reshape existing heart transplantation protocols. Notable efforts are accelerating the development of cardiac tissue engineering, particularly to create larger tissue with enhanced functionality. Decellularized scaffolds, polymer synthetics fibrous matrix, and natural materials are used to build robust cardiac tissue scaffolds to imitate the morphological and physiological patterns of natural tissue. This ultimately helps cells to implant properly to obtain endogenous biological capacity. However, newer designs such as the hydrogel scaffold-free matrix can increase the applicability of artificial tissue to engineering strategies. In this review, we summarize all the methods to produce artificial cardiac tissue using scaffold and scaffold-free technology, their advantages and disadvantages, and their relevance to clinical practice.