Activatable Fluorescence Imaging and Targeted Drug Delivery via Extracellular Vesicle-Like Porous Coordination Polymer Nanoparticles.

Cancer imaging with minimal background signal and targeted intracellular drug delivery are of vital importance in clinical cancer diagnosis and therapy. Herein, we developed a biomimetic nanoprobe for activated fluorescence imaging and targeted drug delivery. pH-responsive porous coordination polymer nanoparticles (PCP NPs) were first synthesized by a codeposition method, anticancer drug doxorubicin (DOX) was then loaded into PCP NPs through physical and electrostatic adsorption (PCP-DOX), and finally the cell membranes extracted from Bel-7402 cancer cells were coated on the DOX-loaded PCP NPs (PCP-DOX-CM). The fluorescence of DOX was quenched due to the fluorescence resonance energy transfer between DOX and PCP NPs. Under acidic environment inside cancer cells, PCP NPs degraded, DOX was released from PCP-DOX-CM, and the fluorescence of DOX was activated, which was very specific for cancers with a high signal-to-noise ratio. Benefited from immune escaping and homologous targeting ability from cancer cell membranes, compared with PCP-CM and PCP-DOX, PCP-DOX-CM significantly enhanced the cellular endocytosis of DOX in Bel-7402 cancer cells and exhibited excellent cancer therapy effect in vitro. Together, our work provides a useful platform for an activated cancer imaging system and personalized cancer treatment.

Preparation of a novel polypyrrole/dolomite composite adsorbent for efficient removal of Cr(VI) from aqueous solution.

A novel adsorbent, deposited PPy on the DMI (PPy/DMI) composite, was successfully synthesized for Cr(VI) removal from aqueous solution. PPy/DMI composite was characterized by BET, SEM, TEM, XRD, and XPS. The SEM and TEM analyses revealed that DMI can greatly reduce the aggregation of PPy and significantly enhance its adsorption performance. The Cr(VI) removal was highly pH dependent. The high selectivity of PPy/DMI composite for Cr(VI) removal was found even in the presence of co-existing ions. The adsorption kinetic process followed the pseudo-second-order equation, demonstrating that the Cr(VI) adsorption behavior onto PPy/DMI is chemisorption. Furthermore, the intra-particle diffusion model implied that the adsorption was controlled by both liquid membrane diffusion and internal diffusion. The adsorption isotherm data fitted well with the Langmuir model with the maximum adsorption capacity (406.50 mg/g at 323 K) which was considerably higher than that of other PPy-based adsorbents. The Cr(VI) adsorption onto PPy/DMI composite was endothermic. The main mechanisms of Cr(VI) removal are involved in adsorption through electrostatic attractions, ion exchange, and in situ reduction. The results suggested that PPy/DMI composite could be a promising candidate for efficient Cr(VI) removal from aqueous solution.

In Situ Fabrication of Silver Nanoparticle-Decorated Polymeric Vesicles for Antibacterial Applications.

Silver/polymeric vesicle composite nanoparticles with good antibacterial properties were fabricated in this study. Silver nanoparticles (AgNPs) were prepared in situ on cross-linked vesicle membranes through the reduction of silver nitrate (AgNO3) using polyvinylpyrrolidone (PVP) via coordination bonding between the Ag+ ions and the nitrogen atoms on the vesicles. X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-vis), and transmission electron microscopy (TEM) analyses confirmed the formation of AgNPs on the vesicles. The antibacterial test demonstrated good antibacterial activity against both Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus) for the produced AgNP-decorated vesicles. The minimum inhibitory concentration (MIC) values of the AgNP-decorated vesicles for E. coli and S. aureus were 8.4 and 9.6 µg/mL, respectively. Cell viability analysis on the A549 cells indicated that the toxicity was low when the AgNP concentrations did not exceed the MIC values, and the wound healing test confirmed the good antibacterial properties of the AgNP-decorated vesicles.

In-depth study of anticancer drug diffusion through a cross-linked -pH-responsive polymeric vesicle membrane.

Post-encapsulation and release of the anticancer drug doxorubicin hydrochloride (DOX·HCl) through cell-like transmission functions of polymeric vesicles were studied using cross-linked pH-responsive polymeric vesicles. The vesicles were fabricated for the first time via the redox-initiated reversible addition-fragmentation chain transfer dispersion polymerization in ethanol-water mixture, using 2-(diisopropylamino)ethyl methacrylate and glycidyl methacrylate, and the vesicle membrane was modified post-cross-linking by using ethylenediamine. A phase diagram was constructed for reproducible fabrication of the polymeric vesicles, and well-shaped vesicles were formed when the target degree of polymerization of the hydrophobic polymer chains was equal to or higher than 50 with solid content in the range of 10-30 wt%. The cross-linked vesicle membrane served as a gate enabling "open" and "closed" states in response to pH stimulation. Up to 50% drug loading efficiency and 39% drug loading content could be achieved, and in vitro release of the DOX-loaded vesicles in aqueous buffer solutions showed a much faster DOX release rate at pH 5.0 than at pH 6.5. The polymeric vesicles were of very low cytotoxicity to A549 cells up to the concentration of 2 mg/mL, and the IC50 of DOX-loaded vesicles were higher than that of the free DOX. The intracellular DOX release study indicated higher cellular uptake capability for DOX-loaded vesicles than that of free DOX.

Preparation and Evaluation of Polyacrylate Microgels and Their Adjuvant Activities Using Ovalbumin as a Model Antigen.

As vaccine adjuvants, polyacrylate materials can induce a specific immune response in the body and have been widely studied in recent years due to their advantages, such as their safety, effectiveness, and low required dosage. In this study, a series of polyacrylates with hydrophobic physical crosslinking and chemical crosslinking were prepared using precipitation polymerization, and their structures were characterized by nuclear magnetic resonance spectroscopy and Fourier-transform infrared spectroscopy. The optimal reaction conditions were determined according to the effect of reaction time, azodiisobutyronitrile, Span 60, allyl pentaerythritol, and octadecyl methacrylate (OMA) contents on the viscosity of the polyacrylate microgel, combined with the effects of allyl pentaerythritol and OMA contents on the subcutaneous immune safety of the polyacrylate microgel in BALB/c mice. The polyacrylate microgels with different OMA contents showed good biological safety. In addition, in vivo immunity experiments were carried out in mice to analyze the adjuvant properties of ovalbumin as a model antigen. Based on the titer results of the IgG1 and IgG2a antibodies, with 1 wt % OMA content, the polyacrylate microgel vaccine could optimally induce the body to produce an immune response type dominated by Th2-type humoral immune response and supplemented by Th1-type cellular immune response.

In vitro corrosion resistance and dual antibacterial ability of curcumin loaded composite coatings on AZ31 alloy: Effect of amorphous calcium carbonate.

Rapid corrosion and bacterial infection are obstacles to put into use biodegradable magnesium (Mg) alloy as biomedical materials. In this research, an amorphous calcium carbonate (ACC)@curcumin (Cur) loaded poly-methyltrimethoxysilane (PMTMS) coating prepared by self-assembly method on micro-arc oxidation (MAO) coated Mg alloy has been proposed. Scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy are adopted to analyze the morphology and composition of the obtained coatings. The corrosion behaviour of the coatings is estimated by hydrogen evolution and electrochemical tests. The spread plate method without or with 808 nm near-infrared irradiation is applied to evaluate the antimicrobial and photothermal antimicrobial ability of the coatings. Cytotoxicity of the samples is tested by 3-(4,5)-dimethylthiahiazo(-z-y1)-2,5-di- phenytetrazoliumromide (MTT) and live/dead assay culturing with MC3T3-E1 cells. Results show that the MAO/ACC@Cur-PMTMS coating exhibited favourable corrosion resistance, dual antibacterial ability, and good biocompatibility. Cur was employed as an antibacterial agent and photosensitizer for photothermal therapy. The core of ACC significantly improved the loading of Cur and the deposition of hydroxyapatite corrosion products during degradation, which greatly promoted the long-term corrosion resistance and antibacterial activity of Mg alloys as biomedical materials.

Aggregation Behavior of Poly(Acrylic acid-co-Octadecyl Methacrylate) and Bovine Serum Albumin in Aqueous Solutions.

Polymer-protein complexing systems have been extensively studied because of their wide application in biomedicine and industry. Here, we studied the aggregation behavior of the hydrophobically associating water-soluble polymer poly(acrylic acid-co-octadecyl methacrylate) [P(AA-co-OMA)] prepared with nonionic surfactant as an emulsifier and bovine serum albumin (BSA) in aqueous solution. We identified the optimal composite conditions of P(AA-co-OMA) and BSA aqueous solution. We measured the zeta potential, dynamic light-scattering particle size, and surface tension of P(AA-co-OMA) and BSA mixed aqueous solution. The results showed that the aggregation behavior between the polymer and BSA relied mainly on the hydrophobic interactions between the molecules. In addition, the best compounding condition was 8 wt.% of P(AA-co-OMA) content. The structure of hydrophobically associating polymer P(AA-co-OMA) and its aggregation with BSA were characterized by Fourier-transform infrared spectroscopy. The infrared spectroscopy results identified the hydrogen bonding behavior of the amino and carboxyl groups between the polymer and BSA. This behavior was also confirmed using thermogravimetric analysis and differential scanning calorimetry. The thermal decomposition temperature and melting temperature of BSA changed before and after it was combined with the polymer. We measured the morphology of the polymer BSA aggregate with 8 % polymer content by transmission electron microscopy. The binding mechanism was investigated, as well.

Corrosion resistance and drug release profile of gentamicin-loaded polyelectrolyte multilayers on magnesium alloys: Effects of heat treatment.

Magnesium (Mg) alloys have received considerable attentions as the emerging biodegradable implant materials in orthopedic surgery applications. However, the rapid corrosion rate and the susceptibility to bacterial infection have prevented their wide spread applications to date. In this work, the gentamicin-loaded multilayers have been constructed on Mg alloys through spin-assisted layer-by-layer (SLbL) assembly. Heat treatment is applied for improving the corrosion resistance and prolonging the drug release profile. In addition, the treated multilayer can promote the formation of hydroxyapatite (HA) during the long-time immersion in Hank's balanced salt solution (HBSS).

Corrosion resistance and antibacterial properties of polysiloxane modified layer-by-layer assembled self-healing coating on magnesium alloy.

Magnesium (Mg) alloys have shown great potential in biomedical materials due to their biocompatibility and biodegradability. However, rapid corrosion rate, which is an inevitable obstacle, hinders their clinical applications. Besides, it is necessary to endow Mg alloys with antibacterial properties, which are crucial for temporary implants. In this study, silver nanoparticles (AgNPs) and polymethyltrimethoxysilane (PMTMS) were introduced into AZ31 Mg alloys via layer-by-layer (LbL) assembly and siloxane self-condensation reaction. The characteristics of the composite films were investigated by SEM, UV-vis, FT-IR, and XRD measurements. Corrosion resistance of the samples was measured by electrochemical and hydrogen evolution tests. Antibacterial activities of the films against Staphylococcus aureus were evaluated by plate-counting method. The results demonstrated that the composite film with smooth and uniform morphologies could enhance the corrosion resistance of Mg alloys owing to the physical barrier and the self-healing functionality of polysiloxane. Moreover, the composite coating possessed antibacterial properties and could prolong the release of assembled silver ions.

CS/PAA@TPGS/PLGA nanoparticles with intracellular pH-sensitive sequential release for delivering drug to the nucleus of MDR cells.

Development of novel nano-drug delivery systems (NDDS) that can transport anticancer drugs into cell nuclei is still a highly desirable strategy for reversing multi-drug resistance (MDR) in cancer therapy. Herein, we designed and prepared a novel NDDS, designated S@L NPs, in which several smaller nanoparticles are contained within a larger nanoparticle. Our S@L NPs (CS/PAA/VP-16@TPGS/PLGA NPs) possess a structure in which smaller nanoparticles (Chitosan-Poly(acrylic acid) nanoparticles, CS/PAA NPs) containing the drug etoposide (VP-16) are loaded within a larger nanoparticle (Vitamin E d-a-tocopheryl polyethylene glycol 1000 succinate-modified poly(lactic-co-glycolic acid) nanoparticles, TPGS/PLGA NPs). The system utilizes intracellular pH gradients to achieve pH-sensitive sequential release within different intracellular domains of MDR cells. S@L NPs could be triggered to degrade and release CS/PAA/VP-16 NPs in the acid environment of the cytosol, endosomes or lysosomes, and CS/PAA/VP-16 NPs were capable of entering the nucleus through nucleopores. It is significant that CS/PAA/VP-16 NPs exhibit disaggregation in the alkaline environment of the nucleus and thereby release the contained anticancer drug. Further mechanistic studies showed that CS/PAA/VP-16 NPs escaped retention and degradation within lysosomes and protected the drug from P-glycoprotein-induced efflux. Simultaneously, S@L NPs enhanced the anticancer effect of the loaded drug by inducing autophagy and apoptosis of MDR cells. This novel NDDS may provide a promising platform for nuclear drug delivery for reversing MDR.