Creation of gastroenteric anastomosis through natural orifice in rats by magnetic compression technique.

BACKGROUND: Being one of the core techniques of magnetic surgery, magnetic compression technique (MCT) has been used for digestive tract anastomosis reconstruction in experimental studies. This study verified the feasibility of gastroenteric anastomosis through natural orifice using MCT in rats. METHODS: The parent and daughter magnets were designed and manufactured for oral and anal insertion in 20 Sprague-Dawley rats. After anesthesia, the parent magnet was inserted into the colon spleen area through the anus, and the daughter magnet was inserted into the stomach through the mouth. Then the two magnets were positioned to attract each other and bind together. The position of the two magnets was monitored using X-ray. The time required for the formation of the anastomosis and expulsion of the magnets were recorded. 2 weeks later, the animal was sacrificed and the anastomotic specimen was obtained which was observed under naked eye and microscope. RESULTS: The gastroenteric anastomosis was successfully performed via natural orifices in 18 out of 20 rats. The mean time to construct the anastomosis was 3.78 ± 0.88 min. X-ray examination showed that the magnets were in the appropriate position in 17 rats. The magnets were excreted in 9.47 ± 1.62 days after surgery. The gross and microscopic examination of the specimen showed that the anastomoses were patent and the mucosa at the anastomotic was smooth. The mean bursting pressure of the anastomosis was 136.94 ± 6.79 mmHg. CONCLUSION: It is feasible to perform gastroenteric anastomosis through natural orifices by MCT.

A Biocompatible Multilayer Film from an Asymmetric Picolinium-Containing Polycation with Fast Visible-Light/NIR-Degradability.

Finely tuning the photodegradation behavior of the layer-by-layer (LbL) film from the view of controlling the chemical structure of the film-building polymer is still a challenge in related fields. To meet this requirement, a photodegradable polymer (P1) is rationally designed for assembling a visible-light-degradable multilayer film with polystyrene sulfonate (PSS). Compared with similar photopolymers (P2 and P3), this asymmetric picolinium-containing polymer can significantly enhance the degradation rate of as-prepared LbL films; under the same degradation condition, the degradation rate of (P1/PSS)10 is 3 and 6.6 times that of (P2/PSS)10 and (P3/PSS)10, respectively. Moreover, near-infrared light (NIR) is available for triggering the degradation of this film with the assistance of upconversion nanoparticles of YbTm@Lu. The cell cytotoxicity and cell proliferation experiments reveal that P1 is nontoxic and favorable for cell proliferation at concentrations of up to 500 µg mL-1 . As for (PSS/P1)10 films, the ratio of cell number of these two samples ((PSS/P1)10 modified: photodegraded) increases dramatically and reaches about 1.67:1 after 72 h incubation. On the basis of these results, it is anticipated that P1 and this LbL film is an exceptional candidate for visible-light/NIR degradable materials in materials and biological science, medicine, and optics.

A Transparent, Highly Stretchable, Autonomous Self-Healing Poly(dimethyl siloxane) Elastomer.

An innovative self-healing polydimethylsiloxane (PDMS) elastomer, namely, PDMS-TFB, is reported by incorporating the reversibly dynamic imine bond as the self-healing points into the PDMS networks. The PDMS-TFB elastomer features good optical transmittance (80%) in full visible light region, high stretchability (≈700%), and excellent autonomous self-healing ability at room temperature. Surprisingly, the self-healing behavior can take place in water and even at a temperature as low as -20 °C in air, showing a promising outlook for broader applications. As a proof-of-concept, this study demonstrates the use of the PDMS-TFB elastomer for preparing anticorrosion coating and adhesive layer, and also the use of such an elastomer to be the platform for fabricating the flexible interconnector and chemical sensor. Remarkably, no significant difference is observed between the pristine and healed samples. Taking full advantage of these unique properties, it is anticipated that such a PDMS-TFB elastomer shows wide applications in the fields of materials science, electronics, biology, optics, etc.