In Situ Regeneration of Silicon Microring Biosensors Coated with Parylene C.

Optical biosensors support disease diagnostic applications, offering high accuracy and sensitivity due to label-free detection and their optical resonance enhancement. However, optical biosensors based on noble metal nanoparticles and precise micro-electromechanical system technology are costly, which is an obstacle for their applications. Here, we proposed a biosensor reuse method with nanoscale parylene C film, taking the silicon-on-insulator microring resonator biosensor as an example. Parylene C can efficiently adsorb antibody by one-step modification without any surface treatment, which simplifies the antibody modification process of sensors. Parylene C (20 nm thick) was successfully coated on the surface of the microring to modify anti-carcinoembryonic antigen (anti-CEA) and specifically detect CEA. After sensing, parylene C was successfully removed without damaging the sensing surface for the sensor reusing. The experimental results demonstrate that the sensing response did not change significantly after the sensor was reused more than five times, which verifies the repeatability and reliability of the reusable method by using parylene C. This framework can potentially reduce the cost of biosensors and promote their further applications.

Robust Natural Polyphenolic Adhesives against Various Harsh Environments.

Although adhesive hydrogels have been extensively explored, the development of adhesives with long-term strong adhesion capacity under various harsh environments is still met with profound challenges such as sophisticated preparation, long-term curing, and low bonding strength. Herein, a series of robust adhesive hydrogels have been developed via the polyphenol-epoxy-cross-linking (PEC) reactions between natural polyphenols (extracts) and epoxy glycidyl ethers. The as-prepared natural polyphenolic adhesive hydrogels could induce strong adhesion onto several kinds of typical substrates (i.e., wood, glass, paper, PET, PMMA, and Fe) under both dry and wet conditions based on multi-interactions. Moreover, those natural polyphenolic adhesives exhibited good low-temperature and solvent resistance performances, which could be widely used in different kinds of device repairment (i.e., chemical, petroleum, wood, metal, glass, plastic, rubber, and other industries) under different conditions. This work could provide new opportunities toward natural-inspired robust adhesives in various fields ranging from chemical transportation, industrial manufacturing, architectural design, and marine engineering to daily life.