RESUMO
Jacob disease is the new formation of a pseudo-joint between both of enlarged coronoid process and even zygomatic arch. A 23-year-old female patient with facial asymmetry and limited mouth opening was reported. Computed tomography images showed the classic symptom of Jacob disease with a mushroom-shaped tumor mass from the coronoid process a pseudoarthrosis joint with zygomatic arch. Coronoidectomy and zygomatic arch reduction were planned to operate based on computer-aided design/computer-aided manufacturing. During the actual operation, the excision of coronoid process and reconstruction of zygomatic arch were all navigated by 3-dimensional-printed surgical templates as designed through an intraoral approach. As a result, the enlarged coronoid process was smoothly removed without sequela and mouth opening along with facial symmetry were successfully improved. The authors suggested that computer-aided design/computer-aided manufacturing should be considered as an auxiliary technique to shorten operation time and enhance surgical accuracy.
Assuntos
Procedimentos de Cirurgia Plástica , Zigoma , Feminino , Humanos , Adulto Jovem , Hiperplasia/cirurgia , Hiperplasia/patologia , Osteotomia Mandibular , Tomografia Computadorizada por Raios X/métodos , Zigoma/diagnóstico por imagem , Zigoma/cirurgia , Zigoma/patologiaRESUMO
AIM: To explore the effect of absorbable collagen thread and cosmetic suture technique on scar inhibition after emergency facial trauma in children, and to explore the application value of absorbable collagen thread in emergency facial trauma. METHODS: Children who received emergency treatment of facial trauma in plastic surgery department from January 2021 to January 2022 were analysed retrospectively, and were divided into absorbable collagen thread group and non-absorbable nylon thread group. The general data, scar appearance and local symptoms of the two groups were analysed, and the scar appearance was scored by scar beauty rating scale and non-inferiority test was analysed statistically. RESULTS: A total of 632 children with facial trauma were included in this study, including 458 patients with absorbable collagen thread and 174 patients with non-absorbable nylon thread. The SCAR score of the absorbable collagen thread group (3.03 ± 1.57) was similar to that of the non-absorbable nylon thread group (2.98 ± 2.39) (95% confidence interval), and the final scar outcome score was not statistically different (P > 0.05). All families of the patients were satisfied with the results of the procedure, 95% very satisfied. CONCLUSION: The use of absorbable collagen thread and cosmetic suture technique to treat the wounds of children with facial emergency trauma, resulted in good wound healing, little scar expansion, low incidence of erythema and pigment abnormality, no obvious surgical trace, and no scar hypertrophy or atrophy. The overall impression was good, the pain of stitch removal was avoided for children's patients, and the satisfaction of family members was high. Cosmetic suture technique with absorbable sutures is worthy of clinical application.
Assuntos
Nylons , Suturas , Criança , Humanos , Estudos Retrospectivos , Resultado do Tratamento , Técnicas de Sutura , Cicatriz/cirurgia , Tratamento de Emergência , Colágeno/uso terapêuticoRESUMO
PURPOSE: This study proposes a high-precision surgical technique that combines both computer-aided design/computer-aided manufacturing (CAD/CAM) and the screw-track transfer technique for condylar and occlusal reconstruction. MATERIALS AND METHODS: A 43-year-old male patient with facial asymmetry, limited mouth opening, and malocclusion underwent condylar and occlusal reconstruction surgery. An autogenous cor-onoid process graft was performed by combining CAD/CAM and the screw-track transfer technique. RESULTS: The surgical plan was transformed successfully from preoperative virtual surgical planning to actual surgery; this was confirmed by merging the postoperative computed tomography images with the preoperative three-dimensional surgical design. The patient recovered well and had better occlusion and facial symmetry, as well as an increased degree of mouth opening post-surgery. No complications were observed. CONCLUSIONS: CAD/CAM combined with the screw-track transfer technique is a precise and feasible method that can be applied to autogenous coronoid process grafts. This approach can be used to reconstruct the condylar process and achieve a good occlusal relationship.
Assuntos
Desenho Assistido por Computador , Cirurgia Assistida por Computador , Adulto , Computadores , Oclusão Dentária , Assimetria Facial/cirurgia , Humanos , Masculino , Osteotomia , Cirurgia Assistida por Computador/métodosRESUMO
There is much interest in developing synthetic analogues of biological membrane channels with high efficiency and exquisite selectivity for transporting ions and molecules. Bottom-up and top-down methods can produce nanopores of a size comparable to that of endogenous protein channels, but replicating their affinity and transport properties remains challenging. In principle, carbon nanotubes (CNTs) should be an ideal membrane channel platform: they exhibit excellent transport properties and their narrow hydrophobic inner pores mimic structural motifs typical of biological channels. Moreover, simulations predict that CNTs with a length comparable to the thickness of a lipid bilayer membrane can self-insert into the membrane. Functionalized CNTs have indeed been found to penetrate lipid membranes and cell walls, and short tubes have been forced into membranes to create sensors, yet membrane transport applications of short CNTs remain underexplored. Here we show that short CNTs spontaneously insert into lipid bilayers and live cell membranes to form channels that exhibit a unitary conductance of 70-100 picosiemens under physiological conditions. Despite their structural simplicity, these 'CNT porins' transport water, protons, small ions and DNA, stochastically switch between metastable conductance substates, and display characteristic macromolecule-induced ionic current blockades. We also show that local channel and membrane charges can control the conductance and ion selectivity of the CNT porins, thereby establishing these nanopores as a promising biomimetic platform for developing cell interfaces, studying transport in biological channels, and creating stochastic sensors.
Assuntos
Membrana Celular/química , Membrana Celular/metabolismo , Bicamadas Lipídicas/química , Bicamadas Lipídicas/metabolismo , Nanotubos de Carbono , Porinas/metabolismo , Processos Estocásticos , Animais , Transporte Biológico , Células CHO , Sobrevivência Celular , Cricetulus , DNA/metabolismo , Células HEK293 , Humanos , Canais Iônicos/metabolismo , Lipossomos , Nanotubos de Carbono/ultraestrutura , Porinas/químicaRESUMO
OBJECTIVE: To investigate segmental maxillary distraction osteogenesis (DO) with hybrid-type distractor in the management of wide alveolar cleft. PATIENTS AND METHODS: Six patients underwent segmental DO with a hybrid-type distractor. After the success of DO and 3-month consolidation period, removal of the distractor was accompanied by alveolar bone graft with iliac bone. Panoramic radiograph and computed tomography scanning were taken preoperatively (T0) and the day after distractor removal (T1). The crest distance between the long axis of cleft nearby teeth was measured. RESULT: All patients completed the DO period, and the succeeding alveolar bone graft healing was uneventful. The mean cleft distance decrease was 12.05 mm (range: 10.1-13.5 mm). As for the mobility degree record of abutment tooth in the transport segment recorded, 6 patients were grading I° at T0, while 5 patients were grading I° and 1 patient was grading II° at T1. CONCLUSION: Segmental maxillary DO with the hybrid-type distractor is successful to reduce the cleft width in these cases, and it is promising in the treatment of wide dental alveolar cleft, especially for the adult patient.
RESUMO
Polyethylene terephthalate (PET) is an important basic polymer, which was used widely in variety of fields. Due to its high crystallinity, compact structure and strong surface hydrophobicity, PET has prominent resistance to biodegradation. In recent years, microplastics, especially polyethylene terephthalate (PET) microplastics, was considered as serious threaten to ecosystems. In this study, alkali-resistant bacteria were used as whole-cell catalysts to try to improve the biodegradation of PET microplastics by increasing the bio-interfacial activity of the polymer substrate. Surfactants were applicated to enhance interfacial activation of enzyme and PET interactions. And an integrated strategy was constructed based on alkali resistant bacteria to catalysis the hydrolysis of PET. The results showed that Tween 20 had the most obvious promoting effect among the four interfacial biocatalysts on biological-chemical combined hydrolysis of PET microplastics with whole-cell biocatalysts in alkaline environment. Obvious etching and fracture were observed on the PET fibre surface after biodegradation in presence of surfactant. The weight loss rate of PET substrate can reach 11.04% after 5 days of biodegradation. Thus, this research provides a promising method for efficient degradation of PET microplastics.
Assuntos
Biodegradação Ambiental , Microplásticos , Polietilenotereftalatos , Bactérias/metabolismo , Ecossistema , Plásticos , Polietilenotereftalatos/química , Polietilenotereftalatos/metabolismo , PolímerosRESUMO
During vertebrate embryonic development, neural crest-derived ectomesenchyme within the maxillary prominences undergoes precisely coordinated proliferation and differentiation to give rise to diverse craniofacial structures, such as tooth and palate. However, the transcriptional regulatory networks underpinning such an intricate process have not been fully elucidated. Here, we perform single-cell RNA-Seq to comprehensively characterize the transcriptional dynamics during mouse maxillary development from embryonic day (E) 10.5-E14.5. Our single-cell transcriptome atlas of â¼28,000 cells uncovers mesenchymal cell populations representing distinct differentiating states and reveals their developmental trajectory, suggesting that the segregation of dental from the palatal mesenchyme occurs at E11.5. Moreover, we identify a series of key transcription factors (TFs) associated with mesenchymal fate transitions and deduce the gene regulatory networks directed by these TFs. Collectively, our study provides important resources and insights for achieving a systems-level understanding of craniofacial morphogenesis and abnormality.
Assuntos
Redes Reguladoras de Genes , Análise da Expressão Gênica de Célula Única , Feminino , Gravidez , Camundongos , Animais , Redes Reguladoras de Genes/genética , Diferenciação Celular/genética , Fatores de Transcrição/genética , Palato , Regulação da Expressão Gênica no DesenvolvimentoRESUMO
Nanoparticle-supported liposomes can be a promising platform for drug delivery, vaccine development, and biomedical imaging. Single-walled carbon nanohorns are a relatively new carbon nanomaterial, and they could be used as carriers of drug and imaging reagents. Assembling lipids around carbon nanohorns would confer this nanomaterial much broader applications such as vaccine development and targeted drug delivery by embedding a target protein or immunogenic protein into the lipid bilayer structure. Here, we show the assembly of functionalized single-walled carbon nanohorns (-CH(2)-CH(2)-COOH(x), ~100 nm) with positively charged lipids through a freeze and thaw cycle. The assembled complex particles can be readily separated from individual nanohorns or liposomes under specific centrifugation conditions. The results from transmission electronic microscopy, flow cytometry through nitrobenzoxadiazole labeled lipids, and zeta potential analysis clearly show that the nanohorns are encapsulated by liposomes with a median size of ca. 120 nm.
Assuntos
Lipossomos/química , Lipossomos/síntese química , Nanotubos de Carbono/química , Sistemas de Liberação de Medicamentos , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Radiotherapy at the temporomandibular joint (TMJ) area often results in trismus, however, post radiation ankylosis is extremely rare and has not been previously reported in literature. Radiation is known to impact the vasculature of bony structures leading to bone necrosis with certain risk factors including surgical intervention, even teeth extraction, that could lead to osteoradionecrosis. Accordingly, gap arthroplasty for such case seemed rather challenging. In this report, we introduce for the first time, a rare case of temporomandibular joint ankylosis post radiotherapy for management of rhabdomyosarcoma in a 12 years-old boy. A modified gap arthroplasty technique combined simultaneously with pterygo-masseteric muscle flap was applied to lower the risk of osteoradionecrosis due surgical trauma at irradiated area. Computed tomographic scan on the head indicated that the TMJ architecture was completely replaced by bone, with fusion of the condyle, sigmoid notch, and coronoid process to the zygomatic arch and glenoid fossa. The patient's problem was totally solved with no osteoradionecrosis or relapse of ankylosis observed at follow up visits. Herein, the modified gap arthroplasty combined with pterygo-masseteric muscle flap could be recommended to be applied on other cases of ankylosis especially after receiving radiotherapy.
RESUMO
Natural polymer hydrogels are expected to be promising biomaterial because of its excellent biocompatibility and biodegradability, but they are soft and easily broken. Herein, the poly (γ-glutamic acid) (γ-PGA)/bacterial cellulose (BC) composite hydrogels with excellent mechanical properties were constructed by introducing bacterial cellulose. The γ-PGA/BC composite hydrogels were obtained by the covalent cross-linking of γ-PGA in the BC nanofibers suspensions. The γ-PGA/BC composite hydrogels exhibited excellent strength and toughness due to the more effective energy dissipation of hydrogen bonds network among BC nanofibers and γ-PGA hydrogel matrix and BC also acts as an enhancer. The compressive fracture strength and toughness of the γ-PGA/BC composite hydrogels could reach up to 5.72 MPa and 0.42 MJ/m3 respectively. Additionally, the tensile strength of γ-PGA/BC composite hydrogels were improved 8.16 times compared with γ-PGA single network hydrogels. More significantly, BC could disperse evenly in the γ-PGA hydrogels because of the hydrophilic nature of γ-PGA and BC nanofillers, which led to good interface compatibility. The result of cytotoxicity tests indicated that γ-PGA/BC composite hydrogels present excellent cytocompatibility, which suggested that the γ-PGA/BC composite hydrogels could serve as promising materials for many biomaterial related applications.
Assuntos
Celulose/química , Hidrogéis/química , Ácido Poliglutâmico/análogos & derivados , Bactérias , Materiais Biocompatíveis/química , Sobrevivência Celular , Força Compressiva , Ácido Glutâmico/química , Nanofibras/química , Ácido Poliglutâmico/química , Polímeros , Resistência à TraçãoRESUMO
Water-soluble poly(ethylene glycol) (PEG) functionalized and hydroxylated endohedral trimetallic nitride metallofullerene derivatives, Gd(3)N@C(80)[DiPEG(OH)(x)], have been synthesized and characterized. The (1)H MRI relaxivities in aqueous solution were measured for the derivatives with four different molecular weights of PEG (350-5000 Da) at 0.35, 2.4, and 9.4 T. The 350/750 Da PEG derivatives have the highest relaxivities among the derivatives, 237/232 mM(-1) s(-1) for r(1) and 460/398 mM(-1) s(-1) for r(2) (79/77 mM(-1) s(-1) and 153/133 mM(-1) s(-1) based on Gd(3+) ion), respectively, at a clinical-range magnetic field of 2.4 T. These represent some of the highest relaxivities reported for commercial or investigational MRI contrast agents. Dynamic light scattering results confirm a larger average size for 350/750 Da PEGs derivatives (95/96 nm) relative to longer chain length derivatives, 5000 Da PEG derivatives (37 nm). Direct infusion of the optimized 350 Da PEG derivatives into live tumor-bearing rat brains demonstrated an initial uniform distribution, and hence, the potential for effective brachytherapy applications when the encapsulated Gd(3+) ions are replaced with radioactive (177)Lu.
Assuntos
Neoplasias Encefálicas/diagnóstico , Meios de Contraste/química , Fulerenos/química , Gadolínio/química , Imageamento por Ressonância Magnética/métodos , Nitrogênio/química , Compostos Organometálicos/química , Animais , Meios de Contraste/síntese química , Meios de Contraste/farmacocinética , Modelos Animais de Doenças , Modelos Moleculares , Peso Molecular , Neoplasias Experimentais/diagnóstico , Compostos Organometálicos/síntese química , Compostos Organometálicos/farmacocinética , Tamanho da Partícula , Polietilenoglicóis/química , Ratos , Distribuição TecidualRESUMO
Distal-less homeobox 2 (Dlx2) is a member of the homeodomain family of transcription factors and is important for the development of cranial neural crest cells (CNCCs)derived craniofacial tissues. Previous studies revealed that Dlx2 was expressed in the cementum and a targeted null mutation disrupted tooth development in mice. However, whether Dlx2 overexpression may impair in vivo tooth morphogenesis remains to be elucidated. The present study used a transgenic mouse model to specifically overexpress Dlx2 in neural crest cells in order to identify the dental phenotypes in mice by observation, microcomputed tomography and histological examination. The Dlx2overexpressed mice exhibited tooth abnormalities including incisor crossbite, shortened tooth roots, increased cementum deposition, periodontal ligament disorganization and osteoporotic alveolar bone. Therefore, Dlx2 overexpression may alter the alveolar bone, cementum and periodontal ligament (PDL) phenotypes in mice.
Assuntos
Regulação da Expressão Gênica no Desenvolvimento/fisiologia , Proteínas de Homeodomínio/biossíntese , Organogênese/fisiologia , Periodonto/embriologia , Dente/embriologia , Fatores de Transcrição/biossíntese , Animais , Proteínas de Homeodomínio/genética , Camundongos , Camundongos Transgênicos , Fatores de Transcrição/genéticaRESUMO
OBJECTIVE: To investigate the practicality of preoperative registration technique in navigational surgery of facial skeleton. METHODS: Five cases were underwent navigational surgery with the preoperative registration technique. The accuracy of registration process was determined, and the deviation between planning model and postoperative computed tomography (CT) model was detected. RESULTS: In each case, the preoperative registration was successful for navigational surgery. Preoperative registration and automatic tracking enabled registration free in the operation procedure. The registration precision measured by the system was less than 0.8 mm. The deviation between the intraoperative anatomy and the CT image was less than 1.5 mm. CONCLUSIONS: Preoperative registration technique demonstrates the potential for improved workflow and accuracy in navigational surgery procedures. This technique was found to be particularly advantageous in cases of mandible navigational surgery in which the dynamic reference frame's hard to be fixed.
Assuntos
Face/cirurgia , Mentoplastia/métodos , Procedimentos Cirúrgicos Bucais/métodos , Crânio/cirurgia , Cirurgia Assistida por Computador/métodos , Pontos de Referência Anatômicos , Desenho de Equipamento , Mentoplastia/instrumentação , Humanos , Imageamento Tridimensional , Procedimentos Cirúrgicos Bucais/instrumentação , Cuidados Pré-Operatórios , Cirurgia Assistida por Computador/instrumentação , Tomografia Computadorizada por Raios XRESUMO
In this paper, a novel pH-sensitive poly (amino acid) hydrogel based on poly γ-glutamic acid (γ-PGA) and ε-polylysine (ε-PL) was prepared by carbodiimide (EDC) and N-hydroxysuccinimide (NHS) mediated polymerization. The influence of PGA/PL molar ratio and EDC/NHS concentration on the structure and properties was studied. Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) proved that hydrogels were crosslinked through amide bond linkage, and the conversion rate of a carboxyl group could reach 96%. Scanning electron microscopy (SEM) results showed a regularly porous structure with 20 µm pore size in average. The gelation time in the crosslink process of PGA/PL hydrogels was within less than 5 min. PGA/PL hydrogels had excellent optical performance that was evaluated by a novel optotype method. Furthermore, PGA/PL hydrogels were found to be pH-sensitive, which could be adjusted to the pH of swelling media intelligently. The terminal pH of swelling medium could be controlled at 5 ± 1 after equilibrium when the initial pH was within 3-11. The swelling kinetics was found to follow a Voigt model in deionized water but a pseudo-second-order model in normal saline and phosphate buffer solution, respectively. The differential swelling degrees were attributed to the swelling theory based on the different ratio of -COOH/-NH2 and pore size in hydrogels. The results of mechanical property indicated that PGA/PL hydrogels were soft and elastic. Moreover, PGA/PL hydrogels exhibited excellent biocompatibility by cell proliferation experiment. PGA/PL hydrogels could be degraded in PBS solution and the degradation rate was decreased with the increase of the molar ratio of PL. Considering the simple preparation process and pH-sensitive property, these PGA/PL hydrogels might have high potential for use in medical and clinical fields.
Assuntos
Hidrogéis/química , Ácido Poliglutâmico/análogos & derivados , Polilisina/química , Animais , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Adesão Celular/efeitos dos fármacos , Linhagem Celular , Proliferação de Células/efeitos dos fármacos , Etildimetilaminopropil Carbodi-Imida/química , Concentração de Íons de Hidrogênio , Camundongos , Microscopia Eletrônica de Varredura , Espectroscopia Fotoeletrônica , Ácido Poliglutâmico/química , Porosidade , Espectroscopia de Infravermelho com Transformada de Fourier , Succinimidas/químicaRESUMO
The work is aimed to investigate the suitability of waste water of candied jujube-processing industry for the production of bacterial cellulose (BC) by Gluconacetobacter xylinum CGMCC No.2955 and to study the structure properties of bacterial cellulose membranes. After acid pretreatment, the glucose of hydrolysate was higher than that of waste water of candied jujube. The volumetric yield of bacterial cellulose in hydrolysate was 2.25 g/L, which was 1.5-folds of that in waste water of candied jujube. The structures indicated that the fiber size distribution was 3-14 nm in those media with an average diameter being around 5.9 nm. The crystallinity index of BC from pretreatment medium was lower than that of without pretreatment medium and BCs from various media had similar chemical binding. Ammonium citrate was a key factor for improving production yield and the crystallinity index of BC.
Assuntos
Celulose/química , Gluconacetobacter xylinus/metabolismo , Membranas/química , Celulose/economia , Águas Residuárias/química , Ziziphus/químicaRESUMO
Tobacco addiction is the second-leading cause of death in the world. Due to the nature of nicotine (a small molecule), finding ways to combat nicotine's deleterious effects has been a constant challenge to the society and the medical field. In the present work, a novel anti-nicotine vaccine based on nanohorn supported liposome nanoparticles (NsL NPs) was developed. The nano-vaccine was constructed by using negatively charged carbon nanohorns as a scaffold for the assembly of cationic liposomes, which allow the conjugation of hapten conjugated carrier proteins. The assembled bio-nanoparticles are stable. Mice were immunized subcutaneously with the nano-vaccine, which induced high titer and high affinity of nicotine specific antibodies in mice. Furthermore, no evidence of clinical signs or systemic toxicity followed multiple administrations of NsL-based anti-nicotine vaccine. These results suggest that NsL-based anti-nicotine vaccine is a promising candidate in treating nicotine dependence and could have potential to significantly contribute to smoking cessation.
Assuntos
Carbono/química , Nanopartículas/química , Nicotina/imunologia , Vacinas/administração & dosagem , Vacinas/imunologia , Animais , Afinidade de Anticorpos , Especificidade de Anticorpos , Peso Corporal/imunologia , Ingestão de Líquidos/imunologia , Feminino , Imunoglobulina G/imunologia , Lipossomos , Camundongos , Camundongos Endogâmicos BALB C , Nicotina/química , Tamanho da Partícula , Células Th1/imunologia , Células Th2/imunologia , Tabagismo/prevenção & controle , VacinaçãoRESUMO
A critical limiting factor of chemotherapy is the unacceptably high toxicity. The use of nanoparticle based drug carriers has significantly reduced the side effects and facilitated the delivery of drugs. Source of the remaining side effect includes (1) the broad final in vivo distribution of the administrated nanoparticles, and (2) strong basal drug release from nanoparticles before they could reach the tumor. Despite the advances in pH-triggered release, undesirable basal drug release has been a constant challenge under in vivo conditions. In this study, functionalized single walled carbon nanohorn supported immunoliposomes were assembled for paclitaxel delivery. The immunoliposomes were formulated with polyethylene glycol, thermal stable and pH sensitive phospholipids. Each nanohorn was found to be encapsulated within one immunoliposome. Results showed a highly pH dependent release of paclitaxel in the presence of serum at body temperature with minimal basal release under physiological conditions. Upon acidification, paclitaxel was released at a steady rate over 30 days with a cumulative release of 90% of the loaded drug. The drug release results proved our hypothesized double controlled release mechanism from the nanoparticles. Other results showed the nanoparticles have doubled loading capacity compared to that of traditional liposomes and higher affinity to breast cancer cells overexpressing Her2 receptors. Internalized nanoparticles were found in lysosomes.
Assuntos
Portadores de Fármacos , Nanocompostos/química , Nanopartículas/química , Linhagem Celular , Preparações de Ação Retardada , Humanos , Concentração de Íons de Hidrogênio , Lipossomos/química , Microscopia Confocal , Microscopia Eletrônica de Transmissão , Paclitaxel/administração & dosagem , Tamanho da Partícula , Polietilenoglicóis/química , Receptor ErbB-2/metabolismo , Soro , SolubilidadeRESUMO
Craniofacial skeleton mainly originate from the cranial neural crest stem cells (CNCCs), which is a subpopulation of neural crest stem cells (NCCs). Dlx2, a member of the homeodomain family of transcription factors, plays crucial roles in the development of the CNCCs derived craniofacial skeleton. Previous reports reveal that Dlx2-targeted null mutation resulted in anomalies in the skeletal derivatives of CNCCs in mice. Dlx2 overexpression in ova disturbed the migration and differentiation of affected CNCCs and induced the development of ectopic skeleton elements. However, whether Dlx2 overexpression can impair the morphogenesis of CNCCs derived craniofacial skeleton in vivo has not been explored. Here, we generated a transgenic mouse overexpressing Dlx2 in NCCs (Wnt1Cre::iZEG-Dlx2). The Wnt1Cre::iZEG-Dlx2 embryos showed decreased cell proliferation, increased cell apoptosis, abnormal chondrogenesis and impaired osteogenesis within the CNCCs population, resulting in obvious craniofacial defects that ranged from a cleft lip and midfacial clefts to neural tube defects and exencephaly. Adult Wnt1Cre::iZEG-Dlx2 mice showed nasal and premaxillary hypoplasia and spinal deformities. These findings reveal that Dlx2 overexpression in NCCs may be a new pathogenesis of facial cleft and spinal kyphosis in mammals, and may offer us a useful model organism to find suitable therapy methods for these genetic defects that may be different from the traumatic defect and resected defect.