Microporous Carbon and Carbon/Metal Composite Materials Derived from Bio-Benzoxazine-Linked Precursor for CO2 Capture and Energy Storage Applications.

There is currently a pursuit of synthetic approaches for designing porous carbon materials with selective CO2 capture and/or excellent energy storage performance that significantly impacts the environment and the sustainable development of circular economy. In this study we prepared a new bio-based benzoxazine (AP-BZ) in high yield through Mannich condensation of apigenin, a naturally occurring phenol, with 4-bromoaniline and paraformaldehyde. We then prepared a PA-BZ porous organic polymer (POP) through Sonogashira coupling of AP-BZ with 1,3,6,8-tetraethynylpyrene (P-T) in the presence of Pd(PPh3)4. In situ Fourier transform infrared spectroscopy and differential scanning calorimetry revealed details of the thermal polymerization of the oxazine rings in the AP-BZ monomer and in the PA-BZ POP. Next, we prepared a microporous carbon/metal composite (PCMC) in three steps: Sonogashira coupling of AP-BZ with P-T in the presence of a zeolitic imidazolate framework (ZIF-67) as a directing hard template, affording a PA-BZ POP/ZIF-67 composite; etching in acetic acid; and pyrolysis of the resulting PA-BZ POP/metal composite at 500 °C. Powder X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, and Brunauer-Emmett-Teller (BET) measurements revealed the properties of the as-prepared PCMC. The PCMC material exhibited outstanding thermal stability (Td10 = 660 °C and char yield = 75 wt%), a high BET surface area (1110 m2 g-1), high CO2 adsorption (5.40 mmol g-1 at 273 K), excellent capacitance (735 F g-1), and a capacitance retention of up to 95% after 2000 galvanostatic charge-discharge (GCD) cycles; these characteristics were excellent when compared with those of the corresponding microporous carbon (MPC) prepared through pyrolysis of the PA-BZ POP precursors with a ZIF-67 template at 500 °C.

Easily Processable Thermosets with Outstanding Performance via Smart Twisted Small-Molecule Benzoxazines.

High-performance aromatic polymers have excellent thermal, mechanical, and electrical properties and are lightweight, but it is highly challenging to deliver outstanding performances while still maintaining good processability of the precursors. Here, a new family of small-molecule benzoxazine resins with ortho-maleimide functionality is reported, which strikes an exceptional balance between the processability and performance. The excellent processability is attributed to the twisted molecular configurations of ortho-maleimide-substituted benzoxazines, which prevent intermolecular packing in the resin systems. The new benzoxazines can polymerize through multiple routes, which eliminate the twisted structures and create highly cross-linked polymer networks. The resulting new polymers are found to possess fascinating properties such as a high thermal stability (no Tg can be detected before 400 °C), excellent flame retardancy (a heat release capacity of 42.5 J g-1 K-1 ), and low dielectric constants (2.62-2.30 in the frequency range of 1 Hz to 10 MHz). The combined processability and versatility highlight the potential of smart benzoxazines in the preparation of high-performance thermosets, with important new applications that may span aerospace, transportation, and electronic packaging materials.

Incidence of adverse events attributable to bupivacaine liposome injectable suspension or plain bupivacaine for postoperative pain in pediatric surgical patients: A retrospective matched cohort analysis.

BACKGROUND: Surgical wound infiltration with local anesthetics is common as part of multimodal analgesia and enhanced recovery pathways in pediatric surgical patients. Liposomal bupivacaine can provide up to 92 hours of pain relief, and was approved by the U.S Food and Drug Administration for local infiltration in adults. It is also commonly used by pediatric surgeons, but its safety profile in this age group has not been described. AIMS: The aim of this study was to describe the incidence of local anesthetic systemic toxicity syndrome in pediatric surgical patients receiving liposomal bupivacaine compared to plain bupivacaine for surgical wound infiltration. METHODS: We conducted a retrospective, single center, assessor blinded cohort study of pediatric surgical inpatients having open or laparoscopic surgery in the Cleveland Clinic between 2013 and 2017 and receiving wound infiltration with local anesthetics. We compared the incidence of local anesthetic systemic toxicity among those who received any dose of liposomal bupivacaine and those who received plain bupivacaine. Groups were matched 1:2 according to procedure type, age, and physical status score. Local anesthetic systemic toxicity was primarily defined as at least two signs or symptoms possibly related to anesthetic toxicity, as judged by two independent adjudicators blinded to the type of local anesthetic. A sensitivity analysis compared the incidence of a single sign/symptom possibly related to anesthetic toxicity. RESULTS: A total of 924 surgical cases were included in the final analysis (356 liposomal bupivacaine and 568 plain bupivacaine cases). The primary outcome did not occur in any patient. The sensitivity analysis found three cases in the liposomal bupivacaine group and two cases in the plain bupivacaine group having a single sign/symptom possibly related to local anesthetic administration (relative risk 2.4, 95% CI 0.4-14.0, P = 0.38). CONCLUSION: In a cohort of pediatric surgical patients receiving wound infiltration with either plain or liposomal bupivacaine, we identified no cases of local anesthetic systemic toxicity syndrome, and only few patients with any sign or symptom that could potentially be related to local anesthetic toxicity.

Cortisol awakening response predicts intrinsic functional connectivity of the medial prefrontal cortex in the afternoon of the same day.

Cortisol awakening response (CAR) is the cortisol secretory activity in the first 30-60 min immediately after awakening in the morning. Alterations in CAR as a trait have been associated with changes in the brain structure and function. CAR also fluctuates over days. Little, however, is known about the relationship between CAR as a state and brain activity. Using resting-state functional magnetic resonance imaging (fMRI), we investigated whether the CAR predicts intrinsic functional connectivity (FC) of the brain in the afternoon of the same day. Data from forty-nine healthy participants were analyzed. Salivary cortisol levels were assessed immediately after awakening and 15, 30 and 60 min after awakening, and resting-state fMRI data were obtained in the afternoon. Global FC strength (FCS) of each voxel was computed to provide a whole-brain characterization of intrinsic functional architecture. Correlation analysis was used to examine whether CAR predicts the intrinsic FC of core brain networks. We observed that the CAR was positively correlated with the FCS of the medial prefrontal cortex (mPFC). Further analysis revealed that higher CAR predicted stronger positive mPFC connectivity with regions in the default mode network. Our findings suggest that the HPA activity after awakening in the early morning may predict intrinsic functional connectivity of mPFC at rest in the afternoon of the same day.

High cortisol awakening response is associated with impaired error monitoring and decreased post-error adjustment.

The cortisol awakening response (CAR), a rapid increase in cortisol levels following morning awakening, is an important aspect of hypothalamic-pituitary-adrenocortical axis activity. Alterations in the CAR have been linked to a variety of mental disorders and cognitive function. However, little is known regarding the relationship between the CAR and error processing, a phenomenon that is vital for cognitive control and behavioral adaptation. Using high-temporal resolution measures of event-related potentials (ERPs) combined with behavioral assessment of error processing, we investigated whether and how the CAR is associated with two key components of error processing: error detection and subsequent behavioral adjustment. Sixty university students performed a Go/No-go task while their ERPs were recorded. Saliva samples were collected at 0, 15, 30 and 60 min after awakening on the two consecutive days following ERP data collection. The results showed that a higher CAR was associated with slowed latency of the error-related negativity (ERN) and a higher post-error miss rate. The CAR was not associated with other behavioral measures such as the false alarm rate and the post-correct miss rate. These findings suggest that high CAR is a biological factor linked to impairments of multiple steps of error processing in healthy populations, specifically, the automatic detection of error and post-error behavioral adjustment. A common underlying neural mechanism of physiological and cognitive control may be crucial for engaging in both CAR and error processing.

Chronic stress exposure decreases the cortisol awakening response in healthy young men.

Academic examination is a major stressor for students in China. Investigation of stress-sensitive endocrine responses to major examination stress serves as a good model of naturalistic chronic psychological stress in an otherwise healthy population. The cortisol awakening response (CAR) is an endocrine marker of the hypothalamic-pituitary-adrenocortical (HPA) axis in response to stress. However, it remains unknown how chronic examination stress impacts the CAR in a young healthy population To exclude the influence of sex effects on hormone level, the CAR and psychological stress responses were assessed on two consecutive workdays in 42 male participants during their preparations for the Chinese National Postgraduate Entrance Exam (NPEE) and 21 non-exam, age-matched male comparisons. On each day, four saliva samples were collected immediately after awakening, 15 minutes, 30 minutes and 60 minutes after awakening. The waking level (S1), the increase within 30 minutes after awakening (R30), the area under the curve with respect to ground (AUCg), and the area under the curve with respect to increase (AUCi) were used to quantify the CAR. Psychological stress and anxiety were assessed by the Perceived Stress Scale and the Spielberger State-Trait Anxiety Inventory, respectively. Male participants in the exam group had greater perceived stress and anxiety scores relatibe to the non-exam group. Both R30 and AUCi in the exam group were significantly lower than the comparison group and this effect was most pronounced for participants with high levels of perceived stress in the exam group. Perceived stress and anxiety levels were negatively correlated with both R30 and AUCi. Chronic examination stress can lead to the decrease of CAR in healthy young men, possibly due to reduced HPA axis activity under long-term sustained stress.

Immediate implants show good therapeutic and aesthetic effect in patients with class III and IV bone loss of the anterior teeth.

OBJECTIVE: To study the effect of immediate implantation on the restoration effect and aesthetic indicators in patients with class III and IV bone loss of the anterior teeth. METHODS: This retrospective study collected the data of 82 patients with single loss of anterior teeth who received tooth implantation. According to the treatment methods, these patients were divided into an observation group (N=43) and a control group (N=39). Patients from the observation group underwent immediate implantation treatment, while those from the control group received conventional implantation processing. Pink aesthetic index (PES) and gingival nipple index (GNI) were used to evaluate the aesthetic indicators. Implant stability quotient (ISQ) was applied to evaluate the stability. The incidences of complications after treatment and the success rate of implantation were also recorded and compared between two groups. RESULTS: At the same day of completed implantation, the observation group had higher various PES index scores than those in the control group (all P<0.05) and no significant differences were found for GNI index between two groups. At the 6th month following the implantation, there was no statistical difference in various PES index scores, GNI index, ISQ value of bone type III and IV between the two groups. The treatment time for bone type III and IV in the observation group was obviously less than that in the control group (all P<0.05). There was no significant difference in the total incidence of complications between the two groups (9.30% vs 12.82%, χ2=0.634, P>0.05). The success rate of implantation in the observation group was remarkably higher than that in the control group (95.35% vs 84.62%, χ2=4.1129, P=0.041). CONCLUSION: An immediate implantation treatment for patients with single loss of an anterior tooth with bone type III and IV could clearly shorten the treatment period and improve the PES scores at baseline and have better restoration and aesthetic effects.

Emerging technologies for conversion of sustainable algal biomass into value-added products: A state-of-the-art review.

Concerns regarding high energy demand and gradual depletion of fossil fuels have attracted the desire of seeking renewable and sustainable alternatives. Similar to but better than the first- and second-generation biomass, algae derived third-generation biorefinery aims to generate value-added products by microbial cell factories and has a great potential due to its abundant, carbohydrate-rich and lignin-lacking properties. However, it is crucial to establish an efficient process with higher competitiveness over the current petroleum industry to effectively utilize algal resources. In this review, we summarize the recent technological advances in maximizing the bioavailability of different algal resources. Following an overview of approaches to enhancing the hydrolytic efficiency, we review prominent opportunities involved in microbial conversion into various value-added products including alcohols, organic acids, biogas and other potential industrial products, and also provide key challenges and trends for future insights into developing biorefineries of marine biomass.

Tantalum boride as a biocompatible coating to improve osteogenesis of the bionano interface.

A proper biological microenvironment conducive to tissue repair and regeneration, while the bioimplant interface directly affects the local microenvironment. In this study, to improve the biological microenvironment, a nanosized tantalum boride (Ta-B) was coated on a titanium alloy substrate (Ti6Al4V, TC4) using magnetron cosputtering. The sample surface was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). To investigate the effects of tantalum boride coating on the microenvironment, rabbit bone marrow stromal cells (BMSCs), and RAW 264.7 cells were respectively seeded on the sample surface and relevant experiments were conducted in vitro. The pure tantalum coating (Ta) and naked TC4 were prepared as controls. Our results showed that the Ta-B coating enhanced cell proliferation and adhesion and inhibited the inflammatory response. Findings of alkaline phosphatase (ALP) staining, alizarin red staining and real-time PCR for osteoblastic gene expression indicated that Ta-B and Ta coating improve the osteogenesis, in which Ta-B coating showed higher osteogenesis than Ta coating. Thus, this study suggests that Ta-B coating with excellent biocompatibility could have new applications for wound healing in bone tissue engineering.

Acute Psychological Stress Disrupts Attentional Bias to Threat-Related Stimuli.

The present study investigated the effect of acute stress on attentional bias to threat using behavioral and ERP methods. Sixty-two male participants were randomly assigned to a stress condition (Trier Social Stress Test) or a control condition. To examine the impact of stress-induced cortisol on attentional bias to threat, participants in the stress group were split into Low- and High cortisol responders. All participants were then administered a modified dot probe task in which the cues were neutral and angry faces. Behavioral results showed a pattern of attentional bias toward threat in the Control group but not in the stress group. For the ERPs, the P100 peaked earlier for the angry-cued targets than the neutral-cued targets in the Control group, which suggests a rapid, adaptive response toward threat. However, this effect was not observed in the stress group, suggesting a suppressed attentional bias under stress. In addition, the stress group (including both Low and High cortisol responders) showed reduced P300 amplitude to target onset than the Control group. These results suggest that acute stress disrupts attentional bias to threat including a reduction in early bias to threat in addition to a subsequent change of attention allocation.

The effects of long-term stress on neural dynamics of working memory processing: An investigation using ERP.

This study examined the neural dynamics of working memory (WM) processing under long-term stress. Forty participants who had been exposed to a long period of major exam preparation (six months) and twenty-one control participants performed a numerical n-back task (n = 1, 2) while electroencephalograms were recorded. Psychological and endocrinal measurements confirmed significantly higher levels of long-term stress for participants in the exam group. The exam group showed significantly increased P2 amplitude in the frontal-central sites in the 1-back and 2-back conditions, whereas other ERP components, including the P1, N1 and P3 and behavioral performance, were unchanged. Notably, the P2 effect was most pronounced in participants in the exam group who reported perceiving high levels of stress. The perceived stress scores positively correlated with the P2 amplitude in the 1-back and 2-back conditions. These results suggest that long-term stress has an impact on attention and the initiation of the updating process in WM.