Molecular-Weight-Dependent Degradation of Plastics: Deciphering Host-Microbiome Synergy Biodegradation of High-Purity Polypropylene Microplastics by Mealworms.

The biodegradation of polypropylene (PP), a highly persistent nonhydrolyzable polymer, by Tenebrio molitor has been confirmed using commercial PP microplastics (MPs) (Mn 26.59 and Mw 187.12 kDa). This confirmation was based on the reduction of the PP mass, change in molecular weight (MW), and a positive Δδ13C in the residual PP. A MW-dependent biodegradation mechanism was investigated using five high-purity PP MPs, classified into low (0.83 and 6.20 kDa), medium (50.40 and 108.0 kDa), and high (575.0 kDa) MW categories to access the impact of MW on the depolymerization pattern and associated gene expression of gut bacteria and the larval host. The larvae can depolymerize/biodegrade PP polymers with high MW although the consumption rate and weight losses increased, and survival rates declined with increasing PP MW. This pattern is similar to observations with polystyrene (PS) and polyethylene (PE), i.e., both Mn and Mw decreased after being fed low MW PP, while Mn and/or Mw increased after high MW PP was fed. The gut microbiota exhibited specific bacteria associations, such as Kluyvera sp. and Pediococcus sp. for high MW PP degradation, Acinetobacter sp. for medium MW PP, and Bacillus sp. alongside three other bacteria for low MW PP metabolism. In the host transcriptome, digestive enzymes and plastic degradation-related bacterial enzymes were up-regulated after feeding on PP depending on different MWs. The T. molitor host exhibited both defensive function and degradation capability during the biodegradation of plastics, with high MW PP showing a relatively negative impact on the larvae.

Far infrared-assisted encapsulation of filter paper strips in poly(methyl methacrylate) for proteolysis.

Filter paper strips were enclosed between two poly(methyl methacrylate) plates to fabricate paper-packed channel microchips under pressure in the presence of far infrared irradiation. After the enclosed paper strip was oxidized by periodate, trypsin was covalently immobilized in them to fabricate microfluidic proteolysis bioreactor. The feasibility and performance of the unique bioreactor were demonstrated by digesting BSA and lysozyme. The results were comparable to those of conventional in-solution proteolysis while the digestion time was significantly reduced to ∼18 s. The suitability of the microfluidic paper-based bioreactors to complex proteins was demonstrated by digesting human serum.

Effects of plastic aging on biodegradation of polystyrene by Tenebrio molitor larvae: Insights into gut microbiome and bacterial metabolism.

Plastics aging reduces resistance to microbial degradation. Plastivore Tenebrio molitor rapidly biodegrades polystyrene (PS, size: < 80 µm), but the effects of aging on PS biodegradation by T. molitor remain uncharacterized. This study examined PS biodegradation over 24 days following three pre-treatments: freezing with UV exposure (PS1), UV exposure (PS2), and freezing (PS3), compared to pristine PS (PSv) microplastic. The pretreatments deteriorated PS polymers, resulting in slightly higher specific PS consumption (602.8, 586.1, 566.7, and 563.9 mg PS·100 larvae-1·d-1, respectively) and mass reduction rates (49.6 %, 49.5 %, 49.2 %, and 48.7 %, respectively) in PS1, PS2, and PS3 compared to PSv. Improved biodegradation correlated with reduced molecular weights and the formation of oxidized functional groups. Larvae fed more aged PS exhibited greater gut microbial diversity, with microbial community and metabolic pathways shaped by PS aging, as supported by co-occurrence network analysis. These findings indicated that the aging treatments enhanced PS biodegradation by only limited extent but impacted greater on gut microbiome and bacterial metabolic genes, indicating that the T. molitor host have highly predominant capability to digest PS plastics and alters gut microbiome to adapt the PS polymers fed to them.

Fabrication of a magnet-assisted alignment device for the amperometric detection of capillary electrophoresis using a carbon nanotube/polypropylene composite electrode.

A magnet-assisted alignment device was designed and fabricated for the amperometric detection of CE. It mainly consisted of a magnet-containing electrode holder, a capillary-based microdisc detection electrode, a detection cell, and a micrometer adjuster. To demonstrate the feasibility and performance of the alignment device, it was used in combination with a carbon nanotube/polypropylene (CNT/PP) composite electrode for the determination of p-phenylenediamine, m-aminophenol, and m-dihydroxybenzene in commercial hair dye by CE. The CNT-based electrode was fabricated by packing a melt mixture of CNTs and PP in a piece of fused silica capillary under heat, offering significantly lower operating potentials, substantially enhanced signal-to-noise characteristics, and high resistance to surface fouling. Because magnetic force was employed to move the detection electrode, the alignment system was significantly simplified. It is characterized by simple design and fabrication, high alignment reproducibility, reduced alignment time, and low cost. Both the alignment device and the CNT/PP composite electrode should find a wide range of applications in microchip CE, flowing injection analysis, and other microfluidic analysis systems.

Graphene/poly(ethylene-co-vinyl acetate) composite electrode fabricated by melt compounding for capillary electrophoretic determination of flavones in Cacumen platycladi.

In this report, a graphene/poly(ethylene-co-vinyl acetate) composite electrode was fabricated by melt compounding for the amperometric detection of capillary electrophoresis. The composite electrode was fabricated by packing a mixture of graphene and melted poly(ethylene-co-vinyl acetate) in a piece of fused silica capillary under heat. The structure of the composite was investigated by scanning electron microscopy and Fourier transform infrared spectroscopy. The results indicated that graphene sheets were well dispersed in the composite to form an interconnected conducting network. The performance of this unique graphene-based detector has been demonstrated by separating and detecting rutin, quercitrin, kaempferol, and quercetin in Cacumen platycladi in combination with capillary electrophoresis. The four flavones have been well separated within 9 min in a 50-cm-long capillary at a separation voltage of 12 kV using a 50 mM sodium borate buffer (pH 9.2). The graphene-based detector offered significantly lower operating potentials, substantially enhanced signal-to-noise characteristics, lower expense of operation, high resistance to surface fouling, and enhanced stability. It showed long-term stability and repeatability with relative standard deviations of <5% for the peak current (n = 15).

Recent advances towards micro(nano)plastics research in wetland ecosystems: A systematic review on sources, removal, and ecological impacts.

In recent years, microplastics/nanoplastics (MPs/NPs) have received substantial attention worldwide owing to their wide applications, persistence, and potential risks. Wetland systems are considered to be an important "sink" for MPs/NPs, which can have potential ecological and environmental effects on the ecosystem. This paper provides a comprehensive and systematic review of the sources and characteristics of MPs/NPs in wetland ecosystems, together with a detailed analysis of MP/NP removal and associated mechanisms in wetland systems. In addition, the eco-toxicological effects of MPs/NPs in wetland ecosystems, including plant, animal, and microbial responses, were reviewed with a focus on changes in the microbial community relevant to pollutant removal. The effects of MPs/NPs exposure on conventional pollutant removal by wetland systems and their greenhouse gas emissions are also discussed. Finally, current knowledge gaps and future recommendations are presented, including the ecological impact of exposure to various MPs/NPs on wetland ecosystems and the ecological risks of MPs/NPs associated with the migration of different contaminants and antibiotic resistance genes. This work will facilitate a better understanding of the sources, characteristics, and environmental and ecological impacts of MPs/NPs in wetland ecosystems, and provide a new perspective to promote development in this field.

Mg-6Zn alloys promote the healing of intestinal anastomosis via TGF-ß/Smad signaling pathway in regulation of collagen metabolism as compared with titanium alloys.

There is a great clinical need for biodegradable materials. This study aimed to investigate the effects of Mg-6Zn and titanium alloy stapler nails on intestinal anastomosis healing mediated via the TGF-ß/Smad signaling pathway, as reflected in collagen metabolism in rabbits. Side-to-side ileo-ileostomy was performed with linear stapler loaded with the two nails. The results showed that no obvious postoperative complications such as abdominal infection and anastomotic leakage were observed. General observation and scanning electron microscope showed that Mg-6Zn alloy nails remained intact in the first week, degraded significantly in the second week, and were little left in the third week, while the titanium alloy nails showed intact substrate throughout the experimental period. Immunohistochemical analysis showed that the expression of TGF-ß1 in Mg-6Zn alloy group was higher than that in titanium alloy group after 1 week, but it increased slowly, arrived at a lower level in the third week. Collagen I showed an increased expression in Mg-6Zn alloy group, but decreased with time in titanium alloy group. An enhanced expression of collagen III in Mg-6Zn alloy group in the first week but much lower in the third week as compared to the titanium alloy group. The expression of smad2 in Mg-6Zn alloy group maintained a steady level, while in titanium alloy group it showed a general upward trend. The expression of smad3 in both groups held steady after 2 weeks, then in the third week, it showed a strong uptrend in Mg-6Zn alloy group, while decreased immediately in titanium alloy group. Our findings suggest that Mg-6Zn alloy nails degraded significantly within 3 weeks and could provide stability of intestinal anastomosis in the reconstruction of intestinal tract. TGF-ß/Smad signaling pathway may play a role in regulation of baseline collagen synthesis throughout the process.

Immobilization of trypsin on poly(urea-formaldehyde)-coated fiberglass cores in microchip for highly efficient proteolysis.

Trypsin was covalently immobilized on poly(urea-formaldehyde)-coated fiberglass cores based on the condensation reaction between poly(urea-formaldehyde) and trypsin for efficient microfluidic proteolysis in this work. Prior to use, a piece of the trypsin-immobilized fiber was inserted into the main channel of a microchip under a magnifier to form a core-changeable bioreactor. Because trypsin was not permanently immobilized on the channel wall, the novel bioreactor was regenerable. Two standard proteins, hemoglobin (HEM) and lysozyme (LYS), were digested by the unique bioreactor to demonstrate its feasibility and performance. The interaction time between the flowing proteins and the immobilized trypsin was evaluated to be less than 10 s. The peptides in the digests were identified by MALDI-TOF MS to obtain PMF. The results indicated that digestion performance of the microfluidic bioreactor was better than that of 12-h in-solution digestion.

Determination of salidroside and tyrosol in Rhodiola by capillary electrophoresis with graphene/poly(urea-formaldehyde) composite modified electrode.

This report describes the fabrication and application of a novel graphene/poly(urea-formaldehyde) composite modified electrode as a sensitive amperometric detector of CE. The composite electrode was fabricated on the basis of the in situ polycondensation of a mixture of graphenes and urea-formaldehyde prepolymers on the surface of a platinum disc electrode. It was coupled with CE for the separation and detection of salidroside and tyrosol in Rhodiola, a traditional Chinese medicine, to demonstrate its feasibility and performance. Salidroside and tyrosol have been well separated within 6 min in a 40 cm long capillary at a separation voltage of 12 kV using a 50 mM borate buffer (pH 9.8). The prepared graphene-based CE detector offered significantly lower detection potential, yielded enhanced signal-to-noise characteristics, and exhibited high resistance to surface fouling and enhanced stability. It showed long-term stability and reproducibility with relative standard deviations of less than 5% for the peak current (n = 15).

Solvent bonding of poly(methyl methacrylate) microfluidic chip using phase-changing agar hydrogel as a sacrificial layer.

In this report, a solvent bonding method based on phase-changing agar hydrogel has been developed for the fabrication of poly(methyl methacrylate) (PMMA) microfluidic chips. Prior to bonding, the channels and the reservoir ports on PMMA channel plates were filled with molten agar hydrogel that could gelate to form solid sacrificial layers at room temperature. Subsequently, PMMA cover sheets were covered on the channeled plates and 1,2-dichlororethane was applied to the interspaces between them. The agar hydrogel in the channels could prevent the bonding solvent and the softened surface of the PMMA cover sheets from filling in the channels. After solvent bonding, the agar hydrogel in the channels and the reservoir ports was melted and removed under pressure. The sealed channels in the complete microchips had been examined by an optical microscope and a scanning electron microscope. The results indicated that high-quality bonding was achieved at room temperature. The prepared microfluidic microchips have been successfully employed in the electrophoresis separation and detection of three cations in combination with contactless conductivity detection.