Genome-wide identification and expression analysis of MYB gene family in Cajanus cajan and CcMYB107 improves plant drought tolerance.

MYB transcription factor (TF) is one of the largest superfamilies that play a vital role in multiple plant biological processes. However, the MYB family has not been comprehensively identified and functionally verified in Cajanus cajan, which is the sixth most important legume crop. Here, 170 CcR2R3-MYBs were identified and divided into 43 functional subgroups. Segmental and tandem duplications and alternative splicing events were found and promoted the expansion of the CcR2R3-MYB gene family. Functional prediction results showed that CcR2R3-MYBs were mainly involved in secondary metabolism, cell fate and identity, developmental processes, and responses to abiotic stress. Cis-acting element analysis of promoters revealed that stress response elements were widespread in the above four functional branches, further suggesting CcR2R3-MYBs were extensively involved in abiotic stress response. The transcriptome data and qRT-PCR results indicated that most of the CcR2R3-MYB genes responded to various stresses, of which the expression of CcMYB107 was significantly induced by drought stress. Overexpression of CcMYB107 enhanced antioxidant enzyme activity and increased proline and lignin accumulation, thus improving the drought resistance of C. cajan. Furthermore, Overexpression of CcMYB107 up-regulated the expression of stress-related genes and lignin biosynthesis genes after drought stress. Our findings established a strong foundation for the investigation of biological function of CcR2R3-MYB TFs in C. cajan.

Thermal oxidation of degradation products from thermoplastic polyvinyl alcohol: Determination on oxidation temperature and residence time.

The degradable protective articles made of thermoplastic polyvinyl alcohol (TPVA) are widely used in nuclear power plants, and they are thermally decomposed after use to reduce solid waste. However, in the real decomposition of TPVA, the temperature in the oxidation reactor is not self-sustaining; as a result, the degradation products contain a lot of CO, resulting in more pollution and energy waste. In this paper, jet stirred reactor (JSR) and Chemkin software were used to study the reaction kinetics characteristics of the oxidation process of degradation products from TPVA in the range of 550 °C-700 °C. Both experiments and kinetic simulation show that a higher average temperature of the oxidation reactor is needed to achieve lower CO emissions. When using 5% or 10% TPVA degradation solution, the average temperature should not befall below 625 °C or 675 °C. The corresponding residence time should be greater than 6 s and 5 s respectively. The combination of research findings and engineering practice provides great help to the optimization of the actual work process.

Simultaneous Determination of 21 Sulfonamides in Poultry Eggs Using Ionic Liquid-Modified Molecularly Imprinted Polymer SPE and UPLC-MS/MS.

An ionic liquid-modified molecularly imprinted polymer (IL-MIP) composite with sulfamethazine as a template molecule and methyl acrylic acid and 1-aminopropyl-3-methylimidazolium bromide as functional monomers was successfully synthesized. The achieved IL-MIP was characterized and evaluated in detail and utilized in the extraction and cleanup of sulfonamides (SAs) in poultry egg samples. The results demonstrated that the IL-MIP possessed a broad reorganization toward SAs and could selectively adsorb 21 kinds of SA compounds. Furthermore, the solid-phase extraction column based on the IL-MIP was used in the extraction and cleanup of 21 SAs in eggs, and the confirmatory detection of SAs was performed using ultraperformance liquid chromatography−tandem mass spectrometry. Under optimum conditions, the limits of detection (LODs) for all SAs ranged from 0.1 ng·g−1 to 1.5 ng·g−1, and the LOD of this method was better than those of the existing methods. The recoveries of SA compounds spiked in egg samples ranged from 84.3% to 105.8%, with low relative standard deviations (<15%). The developed method based on the IL-MIP extraction and cleanup was successfully used in the detection of 21 SAs in more than 100 real poultry egg samples. The results indicated that the proposed method was suitable for detecting 21 SAs in poultry eggs.

MYB20, MYB42, MYB43, and MYB85 Regulate Phenylalanine and Lignin Biosynthesis during Secondary Cell Wall Formation.

Lignin is a phenylpropanoid-derived polymer that functions as a major component of cell walls in plant vascular tissues. Biosynthesis of the aromatic amino acid Phe provides precursors for many secondary metabolites, including lignins and flavonoids. Here, we discovered that MYB transcription factors MYB20, MYB42, MYB43, and MYB85 are transcriptional regulators that directly activate lignin biosynthesis genes and Phe biosynthesis genes during secondary wall formation in Arabidopsis (Arabidopsis thaliana). Disruption of MYB20, MYB42, MYB43, and MYB85 resulted in growth development defects and substantial reductions in lignin biosynthesis. In addition, our data showed that these MYB proteins directly activated transcriptional repressors that specifically inhibit flavonoid biosynthesis, which competes with lignin biosynthesis for Phe precursors. Together, our results provide important insights into the molecular framework for the lignin biosynthesis pathway.

Modification of a nitrocellulose membrane with cellulose nanofibers for enhanced sensitivity of lateral flow assays: application to the determination of Staphylococcus aureus.

Lateral flow assays, as a low-cost, simple, portable and disposable product of vitro diagnostic, are being widely used for point-of-care testing. However, the poor sensitivity of LFAs is the main challenge for commercialization. In order to enhance the sensitivity of LFAs, cellulose nanofibers (CNFs) have been integrated into LFAs to enhance the sensitivity of protein LFAs. A simple method is also presented to modify the properties of paper substrate by incorporating CNFs into a nitrocellulose membrane to enhance the sensitivity of nucleic acid LFAs. This method changes the pore size, porosity, surface groups and surface area of paper substrate and then increases the adsorption ability of biomolecules on paper substrate. The results indicate that the sensitivity of nucleic acid LFAs in Staphylococcus aureus testing achieves a 20-fold enhancement. Hence, we anticipate that this simple method has the potential for other paper-based devices to improve the performance. Graphical abstractA simple method is used to modify the properties of paper substrate by incorporating cellulose nanofibers (CNFs) into nitrocellulose (NC) membrane to enhance the sensitivity of nucleic acid LFAs.

Molecular analysis of patients with polycythemia vera or essential thrombocythemia receiving pegylated interferon α-2a.

Pegylated interferon α-2a (PEG-IFN-α-2a) has previously been shown to induce hematologic and molecular responses in patients with polycythemia vera (PV) or essential thrombocythemia (ET). Here we present a follow-up of a phase 2 trial with PEG-IFN-α-2a treatment in 43 PV and 40 ET patients with detailed molecular analysis. After a median follow-up of 42 months, complete hematologic response was achieved in 76% of patients with PV and 77% of those with ET. This was accompanied by complete molecular response (CMR) (ie, undetectable JAK2V617F) in 18% and 17%, of PV and ET patients, respectively. Serial sequencing of TET2, ASXL1, EZH2, DNMT3A, and IDH1/2 revealed that patients failing to achieve CMR had a higher frequency of mutations outside the Janus kinase-signal transducer and activator of transcription pathway and were more likely to acquire new mutations during therapy. Patients with both JAK2V617F and TET2 mutations at therapy onset had a higher JAK2V617F mutant allele burden and a less significant reduction in JAK2V617F allele burden compared with JAK2 mutant/TET2 wild-type patients. These data demonstrate that PEG-IFN-α-2a induces sustained CMR in a subset of PV or ET patients, and that genotypic context may influence clinical and molecular response to PEG-IFN-α-2a.

The efficacy and hyperthermic release of doxorubicin from liposomal doxorubicin hydrochloride in rabbit VX2 tumours.

PURPOSE: To establish optimum conditions for anti-tumour therapy, we evaluated the efficacy of doxorubicin using liposomal doxorubicin and local hyperthermia to improve the anti-tumour efficacy over liposomal doxorubicin alone in rabbit VX2 tumours. MATERIALS AND METHODS: A VX2 tumour model was established in New Zealand white rabbits, which were randomly divided into five groups: 1) control, 2) free doxorubicin hydrochloride (Dox), 3) liposomal doxorubicin hydrochloride (L-Dox), 4) L-Dox plus 41 °C thermotherapy (L-Dox + 41 °C TT); and 5) L-Dox plus 43 °C thermotherapy (L-Dox + 43 °C TT). To achieve complete tumour remission, multiple high-dose administrations (5 mg/kg, once per week for a total of 3 weeks) were given. An ultrasound hyperthermia instrument was used to induce local hyperthermia and the systemic toxicity of Dox was evaluated by changes in weight, blood count and serum lactic dehydrogenase. The anti-tumour effect of Dox was evaluated by observing the gross tumour volume, weight and rabbit survival. RESULTS: The white blood cell count following administration of Dox or L-Dox was lower than for control animals and those treated with L-Dox + 41 °C TT. There was no difference between the groups with regard to the red blood cell count. Compared with the control and Dox groups, tumour proliferation was significantly inhibited following administration of L-Dox, L-Dox + 41 °C TT and L-Dox + 43 °C TT, as evidenced by the difference in tumour volume, weight and survival time. Differences in tumour proliferation were also found between the L-Dox and thermotherapy groups. CONCLUSION: Local hyperthermia combined with L-Dox can significantly improve anti-tumour efficacy and reduce systemic toxicity.

The stability and controlled release of I-ascorbic acid encapsulated in poly (ethyl-2-cyanoacrylate) nanocapsules prepared by interfacial polymerization of water-in-oil microemulsions.

The L-ascorbic acid (AA) was encapsulated into biodegradable and biocompatible poly(ethyl-2-cyanoacrylate) (PECA) nanocapsules by interfacial polymerization of water-in-oil (W/O) microemulsions. The influences of surfactant concentration, pH value of the dispersed aqueous phase, and W/O ratio on nanocapsule size were discussed. The stability and in vitro release of encapsulated AA were also investigated. The results show that nanocapsules could be obtained under the conditions with low pH value, high fraction of aqueous phase, and appropriate surfactant concentration. The encapsulated AA was protected by nanocapsules from oxidation and presented superior storage stability in aqueous medium than pure AA. Releasing AA from the inner core of nanocapsules could be controlled by adjusting the enzyme hydrolysis extent of the PECA wall.

In vivo microdialysis for the evaluation of transfersomes as a novel transdermal delivery vehicle for cinnamic acid.

In this study, cinnamic acid-loaded transfersomes were prepared and dermal microdialysis sampling was used in Sprague-Dawley rats to compare the amount of drug released into the skin using transfersomes as transdermal carriers with that released on using conventional liposomes. The formulation of cinnamic acid-loaded transfersomes was optimized by a uniform design through in vitro transdermal permeation studies. Hydration time was confirmed as a significant factor influencing the entrapment efficiency of transfersomes, further affecting their transdermal flux in vitro. The fluxes of cinnamic acid from transfersomes were all higher than those from conventional liposomes, and the flux from the optimal transfersome formulation was 3.01-fold higher than that from the conventional liposomes (p < 0.05). An in vivo microdialysis sampling method revealed that the dermal drug concentrations from transfersomes applied on various skin regions were much lower than those required with conventional liposomes. After the administration of drug-containing transfersomes and liposomes on abdominal skin regions of rats for a period of 10 h, the Cmax of cinnamic acid from the compared liposomes was 3.21 ± 0.25 µg/mL and that from the transfersomes was merely 0.59 ± 0.02 µg/mL. The results suggest that transfersomes can be used as carriers to enhance the transdermal delivery of cinnamic acid, and that these vehicles may penetrate the skin in the complete form, given their significant deformability.

Sequencing by avidity enables high accuracy with low reagent consumption.

We present avidity sequencing, a sequencing chemistry that separately optimizes the processes of stepping along a DNA template and that of identifying each nucleotide within the template. Nucleotide identification uses multivalent nucleotide ligands on dye-labeled cores to form polymerase-polymer-nucleotide complexes bound to clonal copies of DNA targets. These polymer-nucleotide substrates, termed avidites, decrease the required concentration of reporting nucleotides from micromolar to nanomolar and yield negligible dissociation rates. Avidity sequencing achieves high accuracy, with 96.2% and 85.4% of base calls having an average of one error per 1,000 and 10,000 base pairs, respectively. We show that the average error rate of avidity sequencing remained stable following a long homopolymer.

Messenger RNA profiling for forensic body fluid identification: research and applications.

Identifying the origin of body fluids left at a crime scene can give a significant insight into crime scene reconstruction by supporting a link between sample donors and actual criminal acts. However, the conventional body fluid identification methods are prone to various limitations, such as time consumption, intensive labor, nonparallel manner, varying degrees of sensitivity and limited specificity. Recently, the analysis of cell-specific messenger RNA expression (mRNA profiling) has been proposed to supplant conventional methods for body fluid identification. Since 2011, the collaborative exercises have been organized by the European DNA Profiling Group (EDNAP) in order to evaluate the robustness and reproducibility of mRNA profiling for body fluid identification. The major advantages of mRNA profiling, compared to the conventional methods, include higher sensitivity, greater specificity, the ability of detecting several body fluids in one multiplex reaction, and compatibility with current DNA extraction and analysis procedure. In the current review, we provided an overview of the present knowledge and detection methodologies of mRNA profiling for forensic body fluid identification and discussed its possible practical application to forensic casework.

Simultaneous rectal neuroendocrine tumors and pituitary adenoma: A case report and review of literature.

BACKGROUND: Neuroendocrine tumors (NET) are rare heterogeneous tumors that arise from neuroendocrine cells throughout the body. Acromegaly, a rare and slowly progressive disorder, usually results from a growth hormone (GH)-secreting pituitary adenoma. CASE SUMMARY: We herein describe a 38-year-old patient who was initially diagnosed with diabetes. During colonoscopy, two bulges were identified and subsequently removed through endoscopic submucosal dissection. Following the surgical intervention, the excised tissue samples were examined and confirmed to be grade 2 NET. 18F-ALF-NOTATATE positron emission tomography-computed tomography (PET/CT) and 68Ga-DOTANOC PET/CT revealed metastases in the peri-intestinal lymph nodes, prompting laparoscopic low anterior resection with total mesorectal excision. The patient later returned to the hospital because of hyperglycemia and was found to have facial changes, namely a larger nose, thicker lips, and mandibular prognathism. Laboratory tests and magnetic resonance imaging (MRI) suggested a GH-secreting pituitary adenoma. The pituitary adenoma shrunk after treatment with octreotide and was neuroendoscopically resected via a trans-sphenoidal approach. Whole-exome sequencing analysis revealed no genetic abnormalities. The patient recovered well with no evidence of recurrence during follow-up. CONCLUSION: 18F-ALF-NOTATE PET/CT and MRI with pathological analysis can effectively diagnose rare cases of pituitary adenomas complicated with rectal NET.

Homogeneous activation induced by bacterial cellulose nanofibers to construct interconnected microporous carbons for enhanced capacitive storage.

Porous carbons have been widely applied for capacitive energy storage, yet usually suffer from insufficient rate performance because of the sluggish ion transport kinetics in deep and multi-branched pores. Herein, we fabricated an interconnected microporous capacitive carbon (IMCC) by growing D (+)-glucosamine on bacterial cellulose (BC) nanofibers scaffold, followed by carbonization and activation. The BC nanofibers acted as a sacrificial template during pre-carbonization, facilitating the subsequent KOH permeation and homogeneous activation. By taking advantage of the interconnected microporous structure, the IMCC delivers a high capacitance of 302 F g-1 at 1 A g-1 and an excellent rate capability of 165 F g-1 at 100 A g-1 for aqueous supercapacitor, demonstrating its fast ion transport capability. Impressively, it also shows a superior gravimetric capacity of 177 mAh g-1 at 0.5 A g-1 and remains a high value of 72 mAh g-1 at 20 A g-1 as a cathode material for Zn-ion hybrid capacitor. This facile and cost-effective design strategy exhibits a great potential to construct carbohydrates-derived interconnected microporous carbon materials for high-rate energy storage.

Ganoderenic acid D-loaded functionalized graphene oxide-based carrier for active targeting therapy of cervical carcinoma.

Ganoderenic acid D (GAD), extracted from the Chinese herb Ganoderma lucidum, was loaded onto a graphene oxide-polyethylene glycol-anti-epidermal growth factor receptor (GO-PEG-EGFR) carrier to develop a targeting antitumor nanocomposite (GO-PEG@GAD). The carrier was fabricated from PEG and anti-EGFR aptamer modified GO. Targeting was mediated by the grafted anti-EGFR aptamer, which targets the membrane of HeLa cells. Physicochemical properties were characterized by transmission electron microscopy, dynamic light scattering, X-ray powder diffraction, and Fourier transform infrared spectroscopy. High loading content (77.3 % ± 1.08 %) and encapsulation efficiency (89.1 % ± 2.11 %) were achieved. Drug release continued for approximately 100 h. The targeting effect both in vitro and in vivo was confirmed by confocal laser scanning microscopy (CLSM) and imaging analysis system. The mass of the subcutaneous implanted tumor was significantly decreased by 27.27 ± 1.23 % after treatment with GO-PEG@GAD compared with the negative control group. Moreover, the in vivo anti-cervical carcinoma activity of this medicine was due to activation of the intrinsic mitochondrial pathway.

Model Construction of the Influence of Tourist Destination Image on Tourists' Word-of-Mouth Communication Based on Cognitive and Emotional Environment.

Tourists base a significant portion of their decisions on the perception they have of a place, which is formed over a protracted period of time and serves as the foundation for word-of-mouth marketing. It is uncommon to talk about how to include travellers' word-of-mouth into tourism research. At the same time, the perception of a travel place has an impact on the entire travel experience as well as posttravel behaviour. This research investigates the impact of tourist destination image on travellers' word-of-mouth communication, and it builds a model of travellers' tourism awareness word-of-mouth communication based on the dual perspectives of cognition and emotion. The study demonstrates that the age of tourists accounted for the biggest proportion-up to 84.3%-among the three parameters influencing word-of-mouth communication among tourists. Second, the highest percentage for tourists' educational attainment is 61.1%; third, the highest percentage for tourists' occupation is 55.4%, demonstrating that age is the primary factor. The kind and strength of visitors' emotional reactions to the environment at their destination are determined by their emotions and the surrounding environment. Integration, which is reflected in tourists' tolerance and proximity to the destination environment, is the cognitive assessment of their perception of the location.

Corneodesmosin as a potential target of oral squamous cell carcinoma.

OBJECTIVE: The relationship between oral squamous cell carcinoma (OSCC) and Corneodesmosin (CDSN) remains unclear. This study aims to explore the correlation between CDSN and the prognosis and survival time of patients with OSCC. METHODS: Bioinformatics were used to identify the hub role of CDSN in the OSCC. A total of 200 patients with OSCC were recruited. Clinical and follow-up data were recorded, and the expression level of CDSN was detected. Pearson chi-square test and Spearman correlation coefficient were used to analyze the relationship between prognosis and related parameters in patients with OSCC. Univariate and multivariate Logistic regression and Cox proportional risk regression were applied for further analysis, and receiver operating characteristic curve and survival curve of subjects were plotted. RESULTS: CDSN was identified as the most significant hub gene of the OSCC by the cytoHubba. By the comparative toxicogenomics database (CTD) analysis, there was strong relationship between the CDSN and mouth neoplasms, head and neck neoplasms, squamous cell carcinoma of head and neck. The OSCC patients with low expression level of CDSN have poor overall survival compared with the high expression level of CDSN (HR = 0.75, 95% confidence interval [95%CI]: 0.57-0.98, P = .036). Spearman correlation coefficient analysis showed that CDSN expression level was significantly correlated with prognosis (ρ = -0.528, P < .001). Multivariate Logistic regression analysis showed that poor prognosis (odds ratio [OR] = 0.096, 95%CI: 0.049-0.189, P < .001) was significantly associated with low expression of CDSN. Cox regression analysis showed that the survival time of OSCC patients was shorter when CDSN expression was low (HR = 0.588, 95%CI: 0.420-0.823, P = .002). Strong predictive value of CDSN for the OSCC survival time was obtained by the biological process (BP)-neural network and support vector machine (SVM). CONCLUSION: CDSN was significantly correlated with OSCC, and the shorter the survival time of patients with OSCC was, the worse the prognosis was.

[Pollution Characteristics and Emission Factors of PCDD/Fs from Iron and Steel Industry].

The pollution level, emission characteristics, and emission factors of PCDD/Fs from a number of steel plants were investigated in a particular province of China. The results showed that the concentration of PCDD/Fs was at a low level and decreased by 1-2 orders of magnitude compared with that in 2005-2019. In detail, the concentrations of PCDD/Fs ranged from 0.003-0.557 ng·m-3(I-TEQ), and the mean value was 0.165 ng·m-3 for the sintering process. Moreover, the concentrations of PCDD/Fs ranged from 0.006 to 0.057 ng·m-3, and the mean value was 0.025 ng·m-3 for the electric furnace process. In addition, the concentration of PCDD/Fs in the iron and steel industry from 2005 to 2020 increased first and then decreased, especially after the implementation of the new emission standard and the ultra-low emission control of conventional pollutants such as smoke, showing a significant decline. The results of fingerprint analysis showed that 2,3,7,8-TCDF was the largest congener contributing to the mass concentration, and lower chlorinated PCDFs were increased. This result differed from those of previous studies in which highly chlorinated PCDFs and PCDDs dominated, indicating that the generation source of PCDD/Fs had changed. The congener and isomer profiles of PCDD/Fs in flue gas from the sintering process were similar to those in the flue gas from the electric furnace process. Additionally, showing the characteristics of the typical high-temperature thermal process, the de novo synthesis may be the dominant mechanism of formation of PCDD/Fs in the sintering process and electric furnace process. The emission factor was 0.003-0.5 µg·t-1 (I-TEQ), and the average emission factor was (0.18±0.22) µg·t-1 for the sintering process. The emission factor was 0.04-0.5 µg·t-1, and the average emission factor was (0.27±0.23) µg·t-1 for the electric furnace process. These values were far lower than those of the standard toolkit for identification and quantification of dioxin and furan emissions released by UNEP in 2013 and the emission factors in the dioxin emission inventory of China in 2004. It is suggested that the emission factors of PCDD/Fs in the iron and steel industry of China should be studied and updated.

Influences of sodium carbonate on physicochemical properties of lansoprazole in designed multiple coating pellets.

Lansoprazole (LSP), a proton-pump inhibitor, belongs to class II drug. It is especially instable to heat, light, and acidic media, indicating that fabrication of a formulation stabilizing the drug is difficult. The addition of alkaline stabilizer is the most powerful method to protect the drug in solid formulations under detrimental environment. The purpose of the study was to characterize the designed multiple coating pellets of LSP containing an alkaline stabilizer (sodium carbonate) and assess the effect of the stabilizer on the physicochemical properties of the drug. The coated pellets were prepared by layer-layer film coating with a fluid-bed coater. In vitro release and acid-resistance studies were carried out in simulated gastric fluid and simulated intestinal fluid, respectively. Furthermore, the moisture-uptake test was performed to evaluate the influence of sodium carbonate on the drug stability. The results indicate that the drug exists in the amorphous state or small (nanometer size) particles without crystallization even after storage at 40°C/75% for 5 months. The addition of sodium carbonate to the pellet protects the drug from degradation in simulated gastric fluid in a dose-dependent manner. The moisture absorbed into the pellets has a detrimental effect on the drug stability. The extent of drug degradation is directly correlated with the content of moisture absorption. In conclusion, these results suggest that the presence of sodium carbonate influence the physicochemical properties of LSP, and the designed multiple coating pellets enhance the drug stability.

[Effect of EDTA and hyaluronic acid on the activity of periodontal ligament fibroblasts and the expression of cytokines].

PURPOSE: To investigate the effect of ethylenediaminetetraacetic acid (EDTA) and hyaluronic acid (HA) on the activity of periodontal ligament fibroblasts (PDLFs) and the expression of cytokines. METHODS: Twelve wisdom teeth extracted due to orthodontics treatment were selected and prepared into 5 mm×4 mm root pieces, then divided into EDTA group, HA group, EDTA+HA group and untreated group according to different treatment methods. They were placed in the well plate and PDLFs inoculated on the root piece. After 24 and 48 h of inoculation, the cell proliferation of each group was detected by MTT assay. The adhesion of PDLFs was observed under microscope. The inflammatory cytokines (IL-6, IL-8 and IL-1ß and TNF-α) levels produced by PDLFs were determined by ELLISA and Western Blot. SPSS 22.0 software package was used for statistical analysis. RESULTS: After 24 h and 48 h inoculation, all the treatments promoted cell proliferation and adhesion of PDLFs compared with the untreated group, and the combined treatment promoted cell proliferation and adhesion significantly better than single treatment (P<0.05). The cell proliferation and adhesion effect of EDTA group and HA group increased with the inoculation time, without significant difference between the groups (P>0.05). The results of ELLISA and Western blot showed that compared with the untreated group, the treatment groups inhibited the expression of inflammatory factors IL-6, IL-1ß and TNF-α, and promoted the expression of IL-8, and the effect of EDTA+HA group was much more significant(P<0.05). CONCLUSIONS: EDTA+HA can significantly promote the growth of periodontal ligament fibroblasts and inhibit the expression of inflammatory cytokines, which may be related to its ability to enhance the adhesion of fibroblasts and then improve their viability.

Short- and medium-chain chlorinated paraffins in plastic animal feed packaging and factors affect their migration into animal feed.

Chlorinated paraffins (CPs) are used as plasticizers and flame retardants in plastics. Plastic packaging containing CPs is widely used for storage of animal feed, which can become contaminated by CPs that migrate into the feed. In the present study, 31 commercial animal feed packaging samples made of polypropylene (PP) or polyethylene (PE) were collected from animal feed manufacturers in China. The mean concentrations of short-chain chlorinated paraffins (SCCPs) in the PP and PE samples were 60.0 and 54.5 µg/g, respectively. The medium-chain chlorinated paraffin (MCCP) mean concentrations in the PP and PE samples were 62.7 and 9.23 µg/g, respectively. The carbon congener group profiles of SCCPs and MCCPs in the samples were different. The dominant SCCP and MCCP chlorine congener groups in all the samples were Cl6-7 and Cl6-8, respectively. Time and temperature influenced the migration of CPs from packaging into animal feed. As the time or temperature increased, the CP concentrations in the animal feed increased but the congener group profiles of the SCCPs and MCCPs in the animal feed did not change. To reduce contamination of animal feed by CPs, it is necessary to restrict the use of CPs in animal feed packaging.