Cross-kingdom RNA interference mediated by insect salivary microRNAs may suppress plant immunity.

Communication between insects and plants relies on the exchange of bioactive molecules that traverse the species interface. Although proteinic effectors have been extensively studied, our knowledge of other molecules involved in this process remains limited. In this study, we investigate the role of salivary microRNAs (miRNAs) from the rice planthopper Nilaparvata lugens in suppressing plant immunity. A total of three miRNAs were confirmed to be secreted into host plants during insect feeding. Notably, the sequence-conserved miR-7-5P is specifically expressed in the salivary glands of N. lugens and is secreted into saliva, distinguishing it significantly from homologues found in other insects. Silencing miR-7-5P negatively affects N. lugens feeding on rice plants, but not on artificial diets. The impaired feeding performance of miR-7-5P-silenced insects can be rescued by transgenic plants overexpressing miR-7-5P. Through target prediction and experimental testing, we demonstrate that miR-7-5P targets multiple plant genes, including the immune-associated bZIP transcription factor 43 (OsbZIP43). Infestation of rice plants by miR-7-5P-silenced insects leads to the increased expression of OsbZIP43, while the presence of miR-7-5P counteracts this upregulation effect. Furthermore, overexpressing OsbZIP43 confers plant resistance against insects which can be subverted by miR-7-5P. Our findings suggest a mechanism by which herbivorous insects have evolved salivary miRNAs to suppress plant immunity, expanding our understanding of cross-kingdom RNA interference between interacting organisms.

Feasibility of 2-Point Fixation by Absorbable Plates Using the Transoral Approach in Management of the Zygomatic Complex Fractures.

PURPOSE: The purpose of this study was to retrospectively evaluate the feasibility of 2-point fixation using absorbable plates by the transoral approach in the management of the zygomatic complex (ZMC) fractures. METHODS: Twenty-five patients (15 male and 10 female, age range 16 y to 55 y) with Knight and North Group Ⅲ zygomatic fractures were included in this case series. Open reduction by intraoral approach was performed on these patients, and the fractures were fixed using absorbable plates placed at the zygomaticomaxillary buttress and infraorbital rim. Postoperatively, follow-up was undertaken to evaluate the fracture healing, mouth opening, facial asymmetry, diplopia, and paresthesia. RESULTS: Postoperatively, all patients achieved uneventful healing; facial symmetry and wound healing were achieved, along with sensory recovery involving the infraorbital nerve. Complications such as sensory disturbances, infection, diplopia, malunion, and nonunion were not encountered in these patients. CONCLUSIONS: Two-point fixation using absorbable plates by transoral approach can provide sufficient stabilization for Knight and North Group III zygomatic fractures.

Atomic-scale observation of non-classical nucleation-mediated phase transformation in a titanium alloy.

Two-phase titanium-based alloys are widely used in aerospace and biomedical applications, and they are obtained through phase transformations between a low-temperature hexagonal closed-packed α-phase and a high-temperature body-centred cubic ß-phase. Understanding how a new phase evolves from its parent phase is critical to controlling the transforming microstructures and thus material properties. Here, we report time-resolved experimental evidence, at sub-ångström resolution, of a non-classically nucleated metastable phase that bridges the α-phase and the ß-phase, in a technologically important titanium-molybdenum alloy. We observed a nanosized and chemically ordered superstructure in the α-phase matrix; its composition, chemical order and crystal structure are all found to be different from both the parent and the product phases, but instigating a vanishingly low energy barrier for the transformation into the ß-phase. This latter phase transition can proceed instantly via vibrational switching when the molybdenum concentration in the superstructure exceeds a critical value. We expect that such a non-classical phase evolution mechanism is much more common than previously believed for solid-state transformations.

Bioinspired Optical Flexible Cellulose Nanocrystal Films with Strain-Adaptive Structural Coloration.

Recent advances of photonic crystals are driven to mechanical sensors and smart wearable devices; however, for chiral photonic cellulose nanocrystal (CNC) materials, vivid structural coloration and reversible mechanochromism like chameleon skin remain a big challenge. Here, we report a ternary co-assembly and post-UV-irradiation polymerization strategy to develop flexible and elastic CNC composite films, which, notably, have naked-eye-visible brilliant structural colors and stretching-induced color change covering a broad wavelength region at a moderate deformation (like skin). By adjusting the stretching, the film is designed as a smart skin to adapt to surrounding environments for camouflage. This work offers a universal strategy for constructing biomimic optically functional cellulose skins.

Synthesis of Poly(thioester sulfonamide)s via the Ring-Opening Copolymerization of Cyclic Thioanhydride with N-Sulfonyl Aziridine Using Mild Phosphazene Base.

Providing access to diverse polymer structures is highly desirable, which helps to explore new polymer materials. Poly(thioester sulfonamide)s, combining both the advantages of thioesters and amides, however, are rarely available in polymer chemistry. Here, the ring-opening copolymerization (ROCOP) of cyclic thioanhydride with N-sulfonyl aziridine using mild phosphazene base, resulting in well-defined poly(thioester sulfonamide)s with highly alternative structures, high yields, and controlled molecular weights, is reported. Additionally, benefiting from the mild catalytic process, this ROCOP can be combined with ROCOP of N-sulfonyl aziridines with cyclic anhydrides to produce novel block copolymers.

Modulating Local Charge Distribution of Carbon Nitride for Promoting Exciton Dissociation and Charge-Induced Reactions.

The sustainable light can generate reduction and oxidation centers in situ through the generation of photoexcited electrons and holes in the presence of photocatalyst. However, the photoexcited electrons and holes have huge Coulombic attraction and high exciton binding energy due to the weak screening effect and dielectric properties in many low-dimensional conjugated polymers, such as carbon nitride. Reducing the exciton binding energy of carbon nitride and promoting the conversion of excitons into free charge carriers are necessary for improving the activity of photocatalytic reactions but still very challenging. Here, by introducing amino-cyano functional groups into carbon nitride, it is demonstrated that excitons can be effectively dissociated into electrons and holes by finely controlling the charge distribution of heptazine ring. It is found that carbon nitride with heptazine rings of positive charge distribution can greatly reduce the exciton binding energy to 24 from 71 meV. Compared with heptazine ring having negative charge distribution, heptazine ring with positive charge distribution can increase photocatalytic hydrogen production of carbon nitride by up to ten times. This work provides an easy way to promote the dissociation of excitons in carbon nitride by regulating the charge distribution.

Expanding the Conjugate Structure of Polymeric Carbon Nitride for Enhanced Light Absorption and Photothermal Conversion.

The development of efficient and inexpensive materials for light energy conversion is very important for achieving sustainable energy supply and carbon neutrality. Polymeric carbon nitride has become a promising material for light energy conversion due to its advantages of simple preparation and high physical and chemical stability. However, the pristine polymeric carbon nitride only absorbs light with a wavelength of less than 450 nm, and the energy conversion for low-energy photons is very limited. Here, by introducing the pyromellitic dianhydride component to construct an in-plane heterostructure, the conjugated structure of polymeric carbon nitride is successfully expanded. This in-plane carbon nitride-carbon nanoribbon (C3 N4 -C) heterostructure has an ultrawide absorption range from 200 to 2000 nm. Compared with the original material, the photothermal conversion performance of C3 N4 -C is significantly improved under the irradiation of Xe lamp or infrared laser. Furthermore, C3 N4 -C exhibits good potential for synergistic photothermal and chemotherapy. This work provides a simple strategy to construct expanded conjugate structure for improved light absorption and energy conversion materials based on polymeric carbon nitride.

Facile Multicomponent Polymerization and Postpolymerization Modification via an Effective Meldrum's Acid-Based Three-Component Reaction.

Providing access to highly diverse polymer structures by multicomponent reactions is highly desirable; efficient Meldrum's acid-based multicomponent reactions, however, have been rarely highlighted in polymer chemistry. Here, the three-component reaction of Meldrum's acid, indole, and aldehyde is introduced into polymer synthesis. Direct multicomponent polymerization of Meldrum's acid, dialdehyde, and diindole can perform under mild conditions, resulting in complex Meldrum's acid-containing polymers with well-defined structures, and high molecular weights. Additionally, nearly quantitative postpolymerization modification can also perform via this Meldrum's acid-based multicomponent reaction. These results indicate that Meldrum's acid-based multicomponent reaction will be a potential tool to prepare novel polymers.

Cationic micelle: A promising nanocarrier for gene delivery with high transfection efficiency.

Micelles have demonstrated an excellent ability to deliver several different types of therapeutic agents, including chemotherapy drugs, proteins, small-interfering RNA and DNA, into tumor cells. Cationic micelles, comprising self-assemblies of amphiphilic cationic polymers, have exhibited tremendous promise with respect to the delivery of therapy genes and gene transfection. To date, research in the field has focused on achieving an enhanced stability of the micellar assembly, prolonged circulation times and controlled release of the gene. This review focuses on the micelles as a nanosized carrier system for gene delivery, the system-related modifications for cytoplasm release, stability and biocompatibility, and clinic trials. In accordance with the development of synthetic chemistry and self-assembly technology, the structures and functionalities of micelles can be precisely controlled, and hence the synthetic micelles not only efficiently condense DNA, but also facilitate DNA endocytosis, endosomal escape, DNA uptake and nuclear transport, resulting in a comparable gene transfection of virus.

Interactions in DNA Condensation: An Important Factor for Improving the Efficacy of Gene Transfection.

The rapid developments of gene therapy are benefit from the construction of efficient gene vectors, which help therapy genes efficiently overcome the barriers in the transport and transfection. Condensing DNA into nanoparticles is a crucial role in gene transfection, and the electrostatic interactions of synthetic cationic liposomes and cationic polymers with DNA are generally used for condensing DNA. Recent research has shown that the introduction of the hydrophobic interaction, hydrogen bonding, and coordinative interactions to the gene delivery vectors is also very important for DNA condensation, delivery, and transfection. This review focuses on the four types of interactions in condensed DNA nanoparticles, which could provide a new perspective for improving gene transfection efficacy.

The Regulation of Sporopollenin Biosynthesis Genes for Rapid Pollen Wall Formation.

Sporopollenin is the major component of the outer pollen wall (sexine). It is synthesized using a pathway of approximately eight genes in Arabidopsis (Arabidopsis thaliana). MALE STERILITY188 (MS188) and its direct upstream regulator ABORTED MICROSPORES (AMS) are two transcription factors essential for tapetum development. Here, we show that all the sporopollenin biosynthesis proteins are specifically expressed in the tapetum and are secreted into anther locules. MS188, a MYB transcription factor expressed in the tapetum, directly regulates the expression of POLYKETIDE SYNTHASE A (PKSA), PKSB, MALE STERILE2 (MS2), and a CYTOCHROME P450 gene (CYP703A2). By contrast, the expression of CYP704B1, ACYL-COA SYNTHETASE5 (ACOS5), TETRAKETIDE a-PYRONE REDUCTASE1 (TKPR1) and TKPR2 are significantly reduced in ams mutants but not affected in ms188 mutants. However, MS188 but not AMS can activate the expression of CYP704B1, ACOS5, and TKPR1 In ms188, dominant suppression of MS188 homologs reduced the expression of these genes, suggesting that MS188 and other MYB family members play redundant roles in activating their expression. The expression of some sporopollenin synthesis genes (PKSA, PKSB, TKPR2, CYP704B1, and ACOS5) was rescued when MS188 was expressed in ams Therefore, MS188 is a key regulator for activation of sporopollenin synthesis, and AMS and MS188 may form a feed-forward loop that activates the expression of the sporopollenin biosynthesis pathway for rapid pollen wall formation.

Donkey pericardium compares favorably with commercial xenopericardia used in the manufacture of transcatheter heart valves.

Transcatheter aortic valve implantation (TAVI) has gained considerable acceptance in the past decade due to its lower risks than conventional open-heart surgery. However, the deformation and delamination of the leaflets during the crimping procedure have raised questions about the durability and long-term serviceability of the pericardium tissue from which the leaflets are made. The collagen architecture, wall thickness and mechanical properties of donkey pericardium were investigated to assess its suitability as an alternative material for the manufacture of heart valves. Coupons sampled from different locations of donkey pericardium were investigated. Bovine, equine, and porcine pericardium specimens served as controls. The donkey pericardium had a similar surface morphology to that of the control pericardia except for the wavy topology on both the fibrous and serous sides. The average thickness of donkey pericardium (ca. 120 µm) was significantly lower than that from bovine (375 µm) and equine (410 µm), but slightly higher than that from porcine (99 µm) specimens. The interlaced wavy collagen bundles in the pericardium were composed of collagen fibers about 100 nm in diameter. This unique structure ensures that the donkey pericardium has a comparable ultimate tensile strength (UTS) and a much higher failure strain than the commercial pericardia used for the manufacture of heart valves. The donkey pericardium has an organized wavy collagen bundle architecture similar to that of bovine pericardium and has a satisfactory UTS and high failure strain. The thin and strong donkey pericardium might be a good candidate valve leaflet material for TAVI.

Miniplates Versus Reconstruction Plates in Vascularized Osteocutaneous Flap Reconstruction of the Mandible.

PURPOSE: The main aim of this article is to compare the complication rate associated with the use of miniplates versus reconstruction plates in vascularized osteocutaneous flap reconstruction of the mandible. PATIENTS AND METHODS: The authors searched PubMed, Web of Science, EMBASE, Chinese BioMedical Literature Database (CBM), Cochrane Library, and clinicaltrials.gov up to September 2017 to identify studies that compared the complication rate of miniplates versus reconstruction plates in patients undergoing mandibular reconstruction. Two reviewers individually extracted the data and performed a quality assessment. Plate exposure, plate fracture/removal, infection, and overall complications were evaluated. RESULTS: Five studies with 511 cases were included in our analysis. No significant difference was found between the groups. However, the reconstruction plate led to fewer overall complications and plate exposure postoperatively than did the miniplate. CONCLUSION: Our meta-analysis suggests that miniplates and reconstruction plates are suitable for mandibular reconstruction with a vascularized osteocutaneous flap.

Laser Fenestration of Aortic Stent-Grafts Followed by Noncompliant vs Cutting Balloon Dilation: A Scanning Electron Microscopy Study.

PURPOSE: To examine the effects of in situ laser fenestration and subsequent balloon dilation (noncompliant vs cutting) on the graft fabric of 4 aortic stent-graft models. METHOD: In an in vitro setup, the Zenith TX2, Talent, Endurant, and Anaconda aortic stent-grafts (all made of polyester graft material) were subjected to laser fenestration with a 2.3-mm-diameter probe at low and high energy in a physiologic saline solution followed by balloon dilation of the hole. For the first series of tests, 6-mm-diameter noncompliant balloons were used and replaced for the second series by 6-mm-diameter cutting balloons. Each procedure was performed 5 times (5 fenestrations per balloon type). The fenestrations were examined visually and with light and scanning electron microscopy. RESULTS: Each fenestration demonstrated various degrees of fraying and/or tearing regardless of the device. The monofilament twill weave of the Talent endograft tore in the warp direction up to 7.09±0.46 mm at high energy compared with 2.41±0.26 mm for the Endurant multifilament device. The fenestrations of the 3 endografts with multifilament weave (Zenith, Anaconda, and Endurant) showed more fraying; fenestration areas in the multifilament Endurant were >10 mm2 at low and high energy. The fenestrations were free of melted fibers, but minor blackening of the filaments was observed in all devices. Overall, the cutting balloons resulted in worse tearing and damage. Of note, the edges of the dilated laser-formed fenestrations of the Talent and the Endurant grafts demonstrated evidence of additional shredded yarns. CONCLUSION: In situ fenestration does not cause any melting of the polyester; however, the observed structural damage to the fabric construction must be carefully considered. Cutting balloons caused various levels of tearing compared to the noncompliant balloons and cannot be recommended for use in this application. Rather, noncompliant balloons should be employed, but only with endografts constructed from multifilament yarns. The use of in situ fenestration must be restricted to urgent and emergent cases until long-term durability can be determined.

Multicomponent Reactions and Multicomponent Cascade Reactions for the Synthesis of Sequence-Controlled Polymers.

Control over the monomer sequence during polymerization has attracted great attention in polymer science, but it remains a serious challenge. Recently, multicomponent reactions have been playing a significant role in the synthesis of sequence-controlled polymers due to their inherent advantage of combining three or more starting materials in time-saving, one-pot operations to afford complex microstructures. In this feature article, the recent representative developments in the synthesis of sequence-controlled polymers by multicomponent reactions are highlighted to give insight on the design of novel sequence-controlled polymers with sufficient molecular diversity and complexity. The main part of this article is divided into three sections according to the different polymerization strategies using multicomponent reactions: direct multicomponent polymerization, multicomponent cascade polymerization, and iterative multicomponent reaction, respectively. It is anticipated that this feature article may provide some guidance for the fabrication of sequence-controlled polymers by multicomponent reactions.

Polypyrrole as Electrically Conductive Biomaterials: Synthesis, Biofunctionalization, Potential Applications and Challenges.

Electrical phenomenon is ubiquitous in any biological system. However, most synthetic biomaterials are insulators to either electrical or ionic current. To mimic the electrical and ionic conductivities of natural tissues, electrically conductive polymers have been studied and are becoming a new class of biomaterials. This chapter focuses on polypyrrole, one of the most widely investigated synthetic and intrinsically conductive polymers. Polypyrrole is a heterocyclic polymer that is both electrically conductive and ionically active. It can be easily synthesized through electrochemical polymerization or oxidative polymerization. Because of its unique properties, polypyrrole has been studied for sensing, drug delivery, and actuation. Because of its good biocompatibility, it has been used to interface electrical elements and tissues, either for recording or stimulation purpose. Polypyrrole can also be chemically modified to carry functional groups and biomolecules, allowing both specific biological recognition and electrical stimulation. This chapter also discusses a unique soft polypyrrole membrane that can be easily used as biomaterials. Hopefully, the readers of this chapter would appreciate the importance of electrical conductivity for biomaterials and the usefulness of polypyrrole.

Ex Vivo Assay of Electrical Stimulation to Rat Sciatic Nerves: Cell Behaviors and Growth Factor Expression.

Neurite outgrowth and axon regeneration are known to benefit from electrical stimulation. However, how neuritis and their surroundings react to electrical field is difficult to replicate by monolayer cell culture. In this work freshly harvested rat sciatic nerves were cultured and exposed to two types of electrical field, after which time the nerve tissues were immunohistologically stained and the expression of neurotrophic factors and cytokines were evaluated. ELISA assay was used to confirm the production of specific proteins. All cell populations survived the 48 h culture with little necrosis. Electrical stimulation was found to accelerate Wallerian degeneration and help Schwann cells to switch into migratory phenotype. Inductive electrical stimulation was shown to upregulate the secretion of multiple neurotrophic factors. Cellular distribution in nerve tissue was altered upon the application of an electrical field. This work thus presents an ex vivo model to study denervated axon in well controlled electrical field, bridging monolayer cell culture and animal experiment. It also demonstrated the critical role of electrical field distribution in regulating cellular activities.

An adhesion-switchable hydrogel dressing for painless dressing removal without secondary damage.

Hydrogels with strong adhesion to wet tissues are considered promising for wound dressings. However, the clinical application of adhesive hydrogel dressing remains a challenge due to the issues of secondary damage during dressing changes. Herein, we fabricated an adhesion-switchable hydrogel formed with poly(acrylamide)-co-poly(N-isopropyl acrylamide), quaternary ammonium chitosan and tannic acid. This hydrogel forms instant and robust adhesion to the skin at body temperature. However, as the temperature rises above the lower critical solution temperature (LCST), the hydrogel loses its adhesion towards the wound area due to the temperature-dependent volume phase transition of the copolymer, occurring around 45 °C. Consequently, the designed hydrogel can be easily detached from adhered tissues upon demand, providing a facile and effective method for painless dressing changes without secondary damage. This hydrogel holds great promise for long-term application in wound dressings.

Ionized copolyesters with pH-responsive degradability: Accelerated degradation in specific environments.

The development of environmentally responsive biodegradable polymers is a promising solution for balancing the stability and degradability of biodegradable plastics. In this study, a commercial biodegradable polyester, poly(butylene adipate-co-butylene terephthalate) (PBAT), was used as the substrate and was synthetically modified with a small amount of anionic sodium 1-3-isophthalate-5-sulfonate (SIPA) to obtain the ionized random poly(butylene adipate-co-butylene terephthalate-co-butylene 5-sodiosulfoisophthalate) (PBATS). The introduction of the sodium sulfonate ionic group enhanced the mechanical and heat-resistant properties of the material, while significantly improving the hydrophilicity and water absorption of the copolyesters of PBATSs and endowing them with special pH-responsive degradation properties. Compared with PBAT, PBATS copolyesters could accelerate degradation in acidic or alkaline buffer solutions and natural seawater, while degradation was inhibited in neutral buffer solutions at pH 7.2. Degradation experiments in simulated gastric, intestinal, and body fluids revealed that the copolyester showed specific and rapid degradation in acidic gastric fluids. This environmentally-responsive degradable material greatly expands the special applications of biodegradable polyesters in the fields of environmental remediation and medical applications.

Enhanced fluorescence properties of polyfluorene-based polymer dots through an ascorbic acid-photoaging treatment for living cell imaging.

The polymer dots (Pdots) prepared by the conjugated polymer (PFO, poly (9,9-dihexylfluorene-2,7-diyl)) have high fluorescence intensity and are often used in biological fluorescence imaging. However, due to the chain defects, the PFO Pdots suffer from stability issues such as photoinactivation and photobleaching. To solve this problem, we drew inspiration from the preparation process of organic planar light-emitting devices and added an optimization processing after Pdots was prepared. We used illumination as the driving force to activate defects on its chain, and ascorbic acid as a reducing substance to restore the chain defects of the polymer to a more stable state. Through this method, we increased the fluorescence intensity by nearly 1.9 times, and significantly improving their long and short-term stability. In addition, it ensures other properties remain unchanged. This optimization scheme is also fully compatible with the entire biological imaging process, ensuring that other important properties such as cytotoxicity do not undergo unnecessary changes. Furthermore, we conducted material characterization and theoretical simulation, revealing that the optimization scheme mainly serves to repair C-9 alkyl defects on the polyfluorene unit. This study has improved and enhanced the fluorescence performance of PFO Pdots, and also provides a way to optimize the treatment of other similar conjugated polymer material systems.