Curcumin: A review of experimental studies and mechanisms related to periodontitis treatment.

Curcumin is the main active ingredient of turmeric, which has a wide range of pharmacological effects, including antitumor, antibacterial, anti-inflammatory, anti-oxidation, immune regulation, and so on. Periodontitis is a prevalent oral inflammatory disease caused by a variety of factors. In recent years, many studies have shown that curcumin has a potential role on the treatment of periodontitis. Curcumin has been used in research related to the treatment of periodontitis in the form of solution, chip, gel, and capsule. Combined with other periodontitis treatment methods, such as scaling and root planing (SRP) and photodynamic therapy (PDT), can enhance curcumin's efficacy in treating periodontitis. In addition to natural curcumin, chemically modified curcumin, such as 4-phenylaminocarbonyl bis-demethoxy curcumin (CMC 2.24) and 4-methoxycarbonyl curcumin (CMC 2.5), have also been used in animal models of periodontitis. Here, this paper reviews the research progress of curcumin on the treatment of periodontitis and its related mechanisms.

Surface functionalization of TiO2 nanotubes with minocycline and its in vitro biological effects on Schwann cells.

BACKGROUND: Minocycline has been widely used in central nervous system disease. However, the effect of minocycline on the repairing of nerve fibers around dental implants had not been previously investigated. The aim of the present study was to evaluate the possibility of using minocycline for the repairing of nerve fibers around dental implants by investigating the effect of minocycline on the proliferation of Schwann cells and secretion of neurotrophic factors nerve growth factor and glial cell line-derived neurotrophic factor in vitro. METHODS: TiO2 nanotubes were fabricated on the surface of pure titanium via anodization at the voltage of 20, 30, 40 and 50 V. The nanotubes structure were characterized by scanning electron microscopy and examined with an optical contact angle. Then drug loading capability and release behavior were detected in vitro. The TiO2 nanotubes loaded with different concentration of minocycline were used to produce conditioned media with which to treat the Schwann cells. A cell counting kit-8 assay and cell viability were both selected to study the proliferative effect of the specimens on Schwann cell. Reverse transcription-quantitative PCR and western blot analyses were used to detect the related gene/protein expression of Schwann cells. RESULTS: The results showed that the diameter of TiO2 nanotubes at different voltage varied from 100 to 200 nm. The results of optical contact angle and releasing profile showed the nanotubes fabricated at the voltage of 30 V met the needs of the carrier of minocycline. In addition, the TiO2 nanotubes loaded with the concentration of 20 µg/mL minocycline increased Schwann cells proliferation and secretion of neurotrophic factors in vitro. CONCLUSIONS: The results suggested that the surface functionalization of TiO2 nanotubes with minocycline was a promising candidate biomaterial for the peripheral nerve regeneration around dental implants and has potential to be applied in improving the osseoperception of dental implant.

A preliminary study for novel use of two Mg alloys (WE43 and Mg3Gd).

In this study, two types of magnesium alloys (WE43 and Mg3Gd) were compared with Heal-All membrane (a biodegradable membrane used in guided bone regeneration) in vitro to determine whether the alloys could be used as biodegradable membranes. Degradation behavior was assessed using immersion testing with simulated body fluid (SBF). Microstructural characteristics before and after immersion were evaluated through scanning electron microscopy, and degradation products were analyzed with energy dispersive spectrometry (EDS). To evaluate the biocompatibility of the three types of materials, we performed cytotoxicity, adhesion, and mineralization tests using human osteoblast-like MG63 cells. Immersion testing results showed no significant difference in degradation rate between WE43 and Mg3Gd alloys. However, both Mg alloys corroded faster than the Heal-All membrane, with pitting corrosion as the main corrosion mode for the alloys. Degradation products mainly included P- and Ca-containing apatites on the surface of WE43 and Mg3Gd, whereas these apatites were rarely detected on the surface of the Heal-All membrane. All three type of materials exhibited good biocompatibility. In the mineralization experiment, the alkaline phosphatase (ALP) activity of 10 % Mg3Gd extract was significantly higher than the extracts of the two other materials and the negative control. This study highlighted the potential of these Mg-REE alloys for uses in bone regeneration and further studies and refinements are obviously required.

Osseointegration behavior of novel Ti-Nb-Zr-Ta-Si alloy for dental implants: an in vivo study.

This study aimed to evaluate the effects of Ti-Nb-Zr-Ta-Si alloy implants on mineral apposition rate and new BIC contact in rabbits. Twelve Ti-Nb-Zr-Ta-Si alloy implants were fabricated and placed into the right femur sites in six rabbits, and commercially pure titanium implants were used as controls in the left femur. Tetracycline and alizarin red were administered 3 weeks and 1 week before euthanization, respectively. At 4 weeks and 8 weeks after implantation, animals were euthanized, respectively. Surface characterization and implant-bone contact surface analysis were performed by using a scanning electron microscope and an energy dispersive X-ray detector. Mineral apposition rate was evaluated using a confocal laser scanning microscope. Toluidine blue staining was performed on undecalcified sections for histology and histomorphology evaluation. Scanning electron microscope and histomorphology observation revealed a direct contact between implants and bone of all groups. After a healing period of 4 weeks, Ti-Nb-Zr-Ta-Si alloy implants showed significantly higher mineral apposition rate compared to commercially pure titanium implants (P < 0.05), whereas there was no significant difference between Ti-Nb-Zr-Ta-Si alloy implants and commercially pure titanium implants (P > 0.05) at 8 weeks. No significant difference of bone-to-implant contact was observed between Ti-Nb-Zr-Ta-Si alloy implants and commercially pure titanium implants implants after a healing period of 4 weeks and 8 weeks. This study showed that Ti-Nb-Zr-Ta-Si alloy implants could establish a close direct contact comparedto commercially pure titanium implants implants, improved mineral matrix apposition rate, and may someday be an alternative as a material for dental implants.

[Effect of Zinc Doped Calcium Phosphate Coating on Bone Formation and the Underlying Biological Mechanism].

Implant surface modified coating can improve its osteoinductivity, about which simple calcium phosphate coating has been extensively studied. But it has slow osteointegration speed and poor antibacterial property, while other metal ions added, such as nano zinc ion, can compensate for these deficiencies. This paper describes the incorporation form, the effect on physical and chemical properties of the material and the antibacterial property of nano zinc, and summarizes the material's biological property given by calcium ion, zinc ion and inorganic phosphate (Pi), mainly focusing on the influence of these three inorganic ions on osteoblast proliferation, differentiation, protein synthesis and matrix mineralization in order to present the positive function of zinc doped calcium phosphate in the field of bone formation.

Finite Element Analysis of Different Carbon Fiber Reinforced Polyetheretherketone Dental Implants in Implant-supported Fixed Denture.

OBJECTIVES: The purpose of this study is to determine the feasibility of polyetheretherketone-based dental implants, and analyze the stress and strain around different kinds of dental implants by finite element analysis. METHODS: The radiographic data was disposed to models in Mimics 19.0. 3D models of implants, crowns and jawbones were established and combined in SolidWorks 2018. Appling axial and oblique loads of 100 N, cloud pictures were exported in Ansys Workbench 18.0 to calculate and analyze the stress and strain in and around different implants. RESULTS: Oblique load tended to deliver more stress to bone tissue than axial load. The uniformity of stress distribution was the best for 30% short carbon fiber reinforced polyetheretherketone implants at axial and buccolingual directions. Stress shielding phenomenon occurred at the neck of 60% continuous carbon fiber reinforced polyetheretherketone and titanium implants. Stress concentration appeared in PEEK implants and the load of bone tissue would aggravate. CONCLUSIONS: 30% short carbon fiber reinforced polyetheretherketone implants demonstrate a more uniform stress distribution in bone-implant contact and surrounding bone than titanium. Stress shielding and stress concentration may be avoided in bone-implant interface and bone tissue. Bone disuse-atrophy may be inhibited in PEEK-based implants.

Curcumin-loaded mesoporous polydopamine nanoparticles modified by quaternized chitosan against bacterial infection through synergistic effect.

Clinically, open wounds caused by accidental trauma and surgical lesion resection are easily infected by external bacteria, hindering wound healing. Antibacterial photodynamic therapy has become a promising treatment strategy for wound infection. In this study, a novel antibacterial nanocomposite material (QMC NPs) was synthesized by curcumin, quaternized chitosan and mesoporous polydopamine nanoparticles. The results showed that 150 µg/mL QMC NPs had good biocompatibility and exerted excellent antibacterial activity against Staphylococcus aureus and Escherichia coli after blue laser irradiation (450 nm, 1 W/cm2). In vivo, QMC NPs effectively treated bacterial infection and accelerated the healing of infected wounds in mice.

Osseointegration behavior of carbon fiber reinforced polyetheretherketone composites modified with amino groups: An in vivo study.

Polyetheretherketone (PEEK) has become increasingly popular in dentistry and orthopedics due to its excellent chemical stability, reliable biosafety, and low elastic modulus. However, PEEK's biomechanical strength and bioactivity are limited and need to be increased as an implant material. The previous study in vitro has shown that the amino-functionalized carbon fiber reinforced PEEK (A-30%-CPEEK) possessed enhanced mechanical property and bioactivity. This study aims to evaluate the effect of amino groups modification on the osseointegration behavior of carbon fiber reinforced PEEK (30%-CPEEK) in rabbits. Herein, 30%-CPEEK and A-30%-CPEEK implant discs were implanted in rabbit skulls for 5 weeks, with pure titanium implants serving as a control. The bone-forming ability and osseointegration in vivo were systematically investigated by micro-computed tomography analysis, scanning electron microscope observation, and histological evaluation. Our results showed that all detection parameters were significantly different between the A-30%-CPEEK and 30%-CPEEK groups, favoring those in the A-30%-CPEEK, whose appraisal parameters were equal to or better than pure titanium. Therefore, this study supported the importance of amino groups in facilitating the new bone formation and bone-implant integration, suggesting that A-30%-CPEEK with enhanced osseointegration will be a promising material for dental or orthopedic implants.

Application of biomolecules modification strategies on PEEK and its composites for osteogenesis and antibacterial properties.

As orthopedic and dental implants, polyetheretherketone (PEEK) is expected to be a common substitute material of titanium (Ti) and its alloys due to its good biocompatibility, chemical stability, and elastic modulus close to that of bone tissue. It could avoid metal allergy and bone resorption caused by the stress shielding effect of Ti implants, widely studied in the medical field. However, the lack of biological activity is not conducive to the clinical application of PEEK implants. Therefore, the surface modification of PEEK has increasingly become one of the research hotspots. Researchers have explored various biomolecules modification methods to effectively enhance the osteogenic and antibacterial activities of PEEK and its composites. Therefore, this review mainly summarizes the recent research of PEEK modified by biomolecules and discusses the further research directions to promote the clinical transformation of PEEK implants.

The antibacterial property of zinc oxide/graphene oxide modified porous polyetheretherketone againstS. sanguinis, F. nucleatumandP. gingivalis.

About 30% failures of implant are caused by peri-implantitis. Subgingival plaque, consisting of S. sanguinis, F. nucleatum,P. gingivalis et al, is the initiating factor of peri-implantitis. Polyetheretherketone (PEEK) is widely used for the fabrication of implant abutment, healing cap and temporary abutment in dental applications. As a biologically inert material, PEEK has shown poor antibacterial properties. To promote the antibacterial activity of PEEK, we loaded ZnO/GO on sulfonated PEEK. We screened out that when mass ratio of ZnO/GO was 4:1, dip-coating time was 25 min, ZnO/GO modified SPEEK shown the best physical and chemical properties. At the meantime, the ZnO/GO-SPEEK samples possess a good biocompatibility. The ZnO/GO-SPEEK inhibitsP. gingivalisobviously, and could exert an antibacterial activity toS. sanguinisin the early stage, prevents biofilm formation effectively. With the favorablein vitroperformances, the modification of PEEK with ZnO/GO is promising for preventing peri-implantitis.

Enhanced corrosion resistance in an inflammatory environment and osteogenic properties of silicalite-1 coated titanium alloy implants.

The corrosion resistance and osteogenic property of titanium-based implants are crucial for their clinical application. Although they have good stability in standard physiological solutions, limited corrosion resistance in the inflammatory environment is still an unavoidable problem. Herein, the calcined and uncalcined silicalite-1 coatings were synthesized on titanium alloy (Ti-6Al-4 V). The corrosion resistance was investigated by simulating an inflammatory environment in vitro, and osteogenic potential was also evaluated. Here, the uncalcined silicalite-1 coating had the highest corrosion protection efficiency (PE) for Ti-6Al-4 V, which inhibited the metal ion release, surface damage and mass loss in the short-term (7 days) and long-term (30 days). Moreover, positive cell responses, including adhesion, proliferation and osteogenic differentiation of MC3T3-E1 cells, were observed in the uncalcined silicalite-1 coating system, supporting its favorable biocompatibility and osteogenic property. Therefore, these findings indicate that the uncalcined silicalite-1 may be a promising coating strategy for the surface modification of Ti-6Al-4 V implants.

Fabrication and mechanical properties of different types of carbon fiber reinforced polyetheretherketone: A comparative study.

OBJECTIVES: To find alternative non-metallic materials as dental implants for clinical application, different types of carbon fiber reinforced polyetheretherketone were fabricated and investigated. METHODS: Continuous carbon fiber reinforced polyetheretherketone fabrics were fabricated with polyetheretherketone fibers and carbon fibers. Different kinds of carbon fiber reinforced polyetheretherketone were synthesized by setting specific experiment parameters of injection or hot press molding. Various mechanical tests were performed to determine the mechanical properties of different carbon fiber reinforced polyetheretherketone, pure polyetheretherketone and pure titanium. RESULTS: Polyetheretherketone composites presented outstanding mechanical and thermal properties after incorporating carbon fiber. The bending and tensile strength of short carbon fiber reinforced polyetheretherketone were close to human bone, and the bending strength of continuous carbon fiber reinforced polyetheretherketone reached 644 MPa, even higher than that of pure titanium. CONCLUSIONS: The mechanical properties of polyetheretherketone composites are more similar to bone tissue than titanium, and the stress shielding phenomenon may be inhibited. They may become promising materials as substitutions for titanium and prospective materials in bone tissue engineering.

The osteogenesis performance of titanium modified via plasma-enhanced chemical vapor deposition: in vitro and in vivo studies.

Titanium (Ti) and its alloys are widely used in dental implants due to their favorable mechanical properties and biocompatibility. Surface characteristics, including physical and chemical properties, are crucial factors to enhance the osteogenesis performance of Ti. The aim of this study is to evaluate amino group surface modification to facilitate the osteogenic potential and bone repair of dental implants both in vitro and in vivo. Herein, amino group-modified Ti surfaces were constructed via the plasma-enhanced chemical vapor deposition (PECVD) technique with an allylamine monomer. The adhesion, proliferation, alkaline phosphate activity and osteogenesis-related genetic expression of MG-63 cells on the surfaces were performed in vitro and presented a significant increase in amino group-modified Ti compared with that in Ti. The in vivo study in miniature pigs was evaluated through micro-computed tomography analysis and histological evaluation, which exhibited enhanced new bone formation in amino group-modified Ti compared with that in Ti after implantation for 4, 8 and 12 weeks. Consequently, amino group surface modification with the PECVD technique may provide a promising modification method to enhance the osteogenesis performance of Ti implants.

Enhanced bioactivity and osteogenic property of carbon fiber reinforced polyetheretherketone composites modified with amino groups.

Polyetheretherketone (PEEK) is considered as a potential dental and orthopedic implant material owing to its favorable thermal and chemical stability, biocompatibility and mechanical properties. However, the inherent bio-inert and inferior osseointegration of PEEK have hampered its clinical application. In addition, carbon fiber is widely used as a filler to reinforce polymers for sturdy composites owing to its high strength, modulus, etc. In the study, carbon fiber reinforced PEEK (CPEEK) composites were fabricated and modified with amino groups by plasma-enhanced chemical vapor deposition surface modification technique. The surface characterization of composites was evaluated by FE-SEM, EDS, AFM, Water contact angle, XPS and FTIR, which revealed that amino groups were successfully incorporated on the modified CPEEK surface and significantly increased the hydrophilicity. In vitro study, cell adhesion, proliferation, ALP activity, ECM mineralization, real-time PCR analysis, and ELISA analysis showed the adhesion, proliferation and osteogenic differentiation of MG-63 cells on the amino group-modified CPEEK surface were higher than the CPEEK, equal to or better than pure titanium. Hence, the results indicated that the amino group-modified CPEEK possessed enhanced bioactivity and osteogenic property, which may be a potential candidate material for dental implants.

Minimally invasive maxillary sinus augmentation with simultaneous implantation on an elderly patient: A case report.

BACKGROUND: In this case study, a minimally invasive transalveolar approach using platelet-rich fibrin and bone substitute with simultaneous implantation was carried out in an elderly patient. We analyzed the cone-beam computed tomography (CBCT) findings to evaluate bone regeneration. CASE SUMMARY: A 65-year-old female with no contraindications for dental implants and loss of maxillary bilateral molars is described. Examination by CBCT showed the available vertical bone height in the bilateral posterior maxilla was 0.5-6.8 mm in the left and 2.8-6.5 mm in the right. The patient underwent a transalveolar approach using platelet-rich fibrin and bone substitute with simulataneous placement of an implant 10 mm in length. Six months post-surgery, the implant showed excellent osseointegration with the bone graft. Thereafter, full-ceramic crowns were fitted. Follow-up at 2 years demonstrated satisfactory prognosis. CONCLUSION: Platelet-rich fibrin and bone substitute can be used to augment the maxillary sinus with a vertical bone height less than 4 mm.

The endoscopically assisted transcrestal sinus floor elevation with platelet-rich fibrin at an immediate implantation of periapical lesion site: A case report.

RATIONALE: The traditional maxillary sinus floor elevation has serious postoperative complications and long healing periods, for patients with insufficient residual bone height (RBH). The endoscopic technique improves the blind nature of the sinus floor elevation procedure. Platelet-rich fibrin (PRF) can promote tissue healing and prevent perforation. PATIENT CONCERN: A 25-year-old female with residual roots in the maxillary right second molar visited our hospital for dental implants. DIAGNOSE: CBCT results showed a low-density shadow at the root tip, and the height of the periapical distance from the maxillary sinus floor was less than 1 mm. INTERVENTION: Patient was immediately subjected to implant after root extraction. Two-step sinus floor elevation was performed under endoscopy. A 12 mm-long implant was installed. OUTCOMES: At 10 months after surgery, the hard and soft tissues were stable, and a full-ceramic crown was placed. LESSONS: Immediate implant and endoscope-guided sinus floor elevation through a transcrestal approach by using PRF as the only grafting material is viable in periapical infected sites with a RBH of less than 1 mm.

Novel ultrafine-grained ß-type Ti-28Nb-2Zr-8Sn alloy for biomedical applications.

Titanium alloys are widely accepted as orthopedic or dental implant materials in the medical field. It is important to evaluate the biocompatibility of an implant material prior to use. A new ß-type ultrafine-grained Ti-28Nb-2Zr-8Sn (TNZS) alloy with low Young's modulus of 31.6 GPa was fabricated. This study aims to evaluate the biocompatibility of TNZS alloy. In this study, we examined the microstructure, chemical composition and surface wettability of the TNZS alloy. The mouse embryonic osteoblast MC3T3-E1 cells and human umbilical vein endothelial cells (HUVECs) were cultured to study the cytocompatibility of TNZS alloy. Also, we evaluated the proinflammatory response of TNZS alloy in vitro and in vivo. The results show that the TNZS did not cause cytotoxicity, genotoxicity to MC3T3-E1 cells and HUVECs. Whereas, the TNZS alloy could significantly promote the cell proliferation, cell spreading and cell adhesion of MC3T3-E1 cells and HUVECs, as well as facilitate the osteogenic differentiation of MC3T3-E1 cells. Moreover, the TNZS alloy did not induce any remarkable proinflammatory response in vitro and in vivo. Thus, the novel TNZS alloy with an elasticity closer to that of human bone is biologically safe and could be a potential candidate for biomedical implant application. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1628-1639, 2019.

Biocompatibility and osteogenic activity of guided bone regeneration membrane based on chitosan-coated magnesium alloy.

Ideally, a guided bone regeneration membrane (GBRM) should possess high strength, as for titanium membranes, along with excellent biocompatibility and osteoconductivity, as for natural absorbable collagen membranes. Besides titanium, magnesium (Mg) is another metal widely used in the biomedical field, which also exhibits biodegradability. In this study, a composite chitosan­magnesium (CS-Mg) membrane was fabricated by dip-coating Mg alloy into chitosan solution. In vitro and in vivo tests were performed to investigate whether this membrane could be used as biodegradable GBRM, and the test results were compared with those obtained for a commercial GBRM (Heal-All). The microstructure was analyzed by scanning electron microscopy-electron dispersive spectroscopy. The degradation behavior was investigated by immersing the membranes into Dulbecco's modified Eagle medium (DMEM). The in vitro biocompatibility was evaluated by cell adhesion, cytotoxicity and alkaline phosphatase (ALP) assays using MG63 cells. The cytotoxicity and ALP assays were performed with diluted extracts of Mg, CS-Mg and Heal-All. The results show that CS-Mg has a suitable degradation rate, as well as similar cell adhesion and cytocompatibility to Heal-All. However, the 10% CS-Mg extracts exhibited higher ALP activity at 3 and 5 days (p < 0.05) compared with the medium control and the Heal-All extracts, but no differences with 10% Mg extracts (p > 0.05). Rabbit calvarial defects were used for testing the osteogenic activity in vivo. Three groups of samples were examined: CS-Mg, Heal-All, and a blank control. Higher amounts of new bone were formed for the CS-Mg and Heal-All groups (p < 0.05) compared with the blank control, whereas no significant differences between the CS-Mg and Heal-All groups were observed (p > 0.1). In conclusion, the CS-Mg membrane shows great potential for application as a biodegradable metallic GBRM with excellent osteogenic activity.

The effect of amino plasma-enhanced chemical vapor deposition-treated titanium surface on Schwann cells.

The surface modification of titanium and its alloys with amino group plasma-enhanced chemical vapor deposition has been proven to enhance the performance of implants on initial osteoblast bioactivity in vitro. However, scarce information on the effect of this kind of surface modification on nerve regeneration exists. In this study, the surface chemistry of pure Ti disks and surface-modified disks was examined using X-ray photoelectron spectroscopy. Cell counting kit 8 assay, 4,6-diamidino-2-phenylindole staining, flow cytometry, and scanning electron microscopy showed that either the p30% or cw + p30% mode-mediated surface significantly promote Schwann cell adhesion without any cytotoxicity compared with the pure Ti surface, and the cw + p30% group showed the best performance on cell adhesion. However, results of polymerase chain reaction and Western blot analyses showed that the mRNA and protein levels of glial cell-derived neurotrophic factor and nerve growth factor of the p30% and cw + p30% groups were lower than those of the Ti group at some time points. Generally, the results indicate that amino-functionalized Ti surfaces can promote Schwann cell adhesion without cytotoxicity, but this modification, in fact, inhibited the expression of the key growth factors GDNF and NGF of Schwann cells. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 265-271, 2018.

[A novel approach of using fouling index to evaluate NOM fouling behavior during low pressure ultrafiltration process].

In this study, fouling index (FI) was introduced as a novel approach to investigate NOM fouling behavior during low pressure membrane ultrafiltration process. Three kinds of typical NOMs, humic acid (HA), bovine serum albumin (BSA) and sodium alginate (NaAlg), were used in the experiments. The results indicated that the fouling caused by NOM can be considered as two steps with different FI values. One is the fast fouling phase, and the other is the slow phase. Apparently, the total fouling index of the fast phase (TFI(F)) was much greater than that of the slow phase (TFI(S)), which means the initial interaction between NOM and membrane would play a significant role in the whole fouling process. A higher TFI(F) could lead to a faster fouling and the flux would decline more rapidly. After hydraulic washing, the flux was recovered and the resistance was reduced, indicating that physical cleaning could remove a part of foulants. Additionally, the results also represented that the sequences of NOM causing irreversible fouling and chemical clean irreversible fouling were BSA > HA > NaAlg and NaAlg > BSA > HA, respectively. Humic acid and protein tended to cause irreversible fouling and were easily removed by alkaline cleaning, while irreversible fouling caused by polysaccharide was difficult to remove by alkaline. The main cause of membrane fouling may be the interaction between foulants and membrane, which needs further research. Generally speaking, FI with a simple expression would play a significant role to describe the membrane fouling.