RESUMO
For decades, titanium implants have shown impressive advantages in bone repair. However, the preparation of implants with excellent antimicrobial properties as well as better osseointegration ability remains difficult for clinical application. In this study, black phosphorus nanosheets (BPNSs) were doped into hydroxyapatite (HA) coatings using electrophoretic deposition. The coatings' surface morphology, roughness, water contact angle, photothermal properties, and antibacterial properties were investigated. The BP/HA coating exhibited a surface roughness of 59.1 nm, providing an ideal substrate for cell attachment and growth. The water contact angle on the BP/HA coating was measured to be approximately 8.55°, indicating its hydrophilic nature. The BPNSs demonstrated efficient photothermal conversion, with a temperature increase of 42.2°C under laser irradiation. The BP/HA composite coating exhibited a significant reduction in bacterial growth, with inhibition rates of 95.6% and 96.1% against Staphylococcus aureus and Escherichia coli. In addition, the cytocompatibility of the composite coating was evaluated by cell adhesion, CCK8 and AM/PI staining; the effect of the composite coating in promoting angiogenesis was assessed by scratch assay, transwell assay, and protein blotting; and the osteoinductivity of the composite coating was evaluated by alkaline phosphatase assay, alizarin red staining, and Western blot. The results showed that the BP/HA composite coating exhibited superior performance in promoting biological functions such as cell proliferation and adhesion, antibacterial activity, osteogenic differentiation, and angiogenesis, and had potential applications in vascularized bone regeneration.
Assuntos
Durapatita , Titânio , Durapatita/farmacologia , Durapatita/química , Titânio/farmacologia , Titânio/química , Osseointegração , Osteogênese , Materiais Revestidos Biocompatíveis/farmacologia , Materiais Revestidos Biocompatíveis/química , Antibacterianos/farmacologia , Água/farmacologia , Propriedades de SuperfícieRESUMO
The acidity of high tannic acid (TA) content solution can destroy the structure of protein, such as gelatin (G). This causes a big challenge to introduce abundant TA into the G-based hydrogels. Here, the G-based hydrogel system with abundant TA as hydrogen bonds provider was constructed by a "protective film" strategy. The protective film around the composite hydrogel was first formed by the chelation of sodium alginate (SA) and Ca2+. Subsequently, abundant TA and Ca2+ were successively introduced into the hydrogel system by immersing method. This strategy effectively protected the structure of the designed hydrogel. After treatment with 0.3 w/v TA and 0.06 w/v Ca2+ solutions, the tensile modulus, elongation at break and toughness of G/SA hydrogel increased about 4-, 2-, and 6-fold, respectively. Besides, G/SA-TA/Ca2+ hydrogels exhibited good water retention, anti-freezing, antioxidant, antibacterial properties and low hemolysis ratio. Cell experiments showed that G/SA-TA/Ca2+ hydrogels possessed good biocompatibility and could promote cell migration. Therefore, G/SA-TA/Ca2+ hydrogels are expected to be used in the field of biomedical engineering. The strategy proposed in this work also provides a new idea for improving the properties of other protein-based hydrogels.
Assuntos
Alginatos , Antibacterianos , Antioxidantes , Materiais Biocompatíveis , Gelatina , Hidrogéis , Gelatina/química , Alginatos/química , Hidrogéis/química , Hidrogéis/farmacologia , Antibacterianos/química , Antibacterianos/farmacologia , Antioxidantes/química , Antioxidantes/farmacologia , Polifenóis , Resistência à Tração , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Movimento Celular/efeitos dos fármacos , Cálcio/química , Cátions Bivalentes/química , Soluções , Staphylococcus aureus/efeitos dos fármacos , Escherichia coli/efeitos dos fármacos , Animais , Coelhos , Hemólise/efeitos dos fármacos , Células L , CamundongosRESUMO
Calcium phosphate cement (CPC) has attracted extensive interest from surgeons and materials scientists. However, the collapsibility of calcium phosphate cement limits its clinical application. In this work, a gel network of SA-CA formed by the reaction of citric acid (CA) and sodium alginate (SA) was introduced into the α-TCP/α-CSH composite. Furthermore, a high proportion of α-CSH provided more calcium sources for the system to combine with SA forming a gel network to improve the cohesion property of the composite, which also played a regulating role in the conversion of materials to HA. The morphology, physicochemical properties, and cell compatibility of the composites were studied with SA-CA as curing solution. The results show that SA-CA plays an important role in the compressive strength and collapse resistance of bone cement, and its properties can be regulated by changing the content of CA. When CA is 10 wt%, the mechanical strength is the highest, reaching 12.49 ± 2.03 MPa, which is 265.80% higher than water as the solidifying liquid. In addition, the cell experiments showed that the samples were not toxic to MC3T3 cells. The results of ALP showed that when SA-CA were used as curing solution, the activity of ALP was higher than that of blank sample, indicating that the composite bone cement could be conducive to the differentiation of osteoblasts. In this work, the α-CSH/α-TCP based composite regulated by gel network of SA-CA can provide a promising strategy to improve the cohesion of bone cement.
Assuntos
Sulfato de Cálcio , Fosfatos , Sulfato de Cálcio/química , Cimentos Ósseos/farmacologia , Cimentos Ósseos/química , Ácido Cítrico/farmacologia , Sulfatos , Alginatos/farmacologia , Alginatos/química , Fosfatos de Cálcio/farmacologia , Fosfatos de Cálcio/química , Teste de MateriaisRESUMO
A novel self-hardening α-tricalcium phosphate (α-TCP) bone cement complexed with different content of α-calcium sulfate hemihydrate (α-CSH) and micrometer hydroxyapatite mineralized silk fibroin (HA-SF) using micro/SF as curing liquid has been investigated in this work, which was capable of tunable setting time, degradation, mechanical property and ability to anti-washout. After addition 0 â¼ 25% α-CSH to the α-TCP cement with SFFs as curing liquid, it shortened the setting time of the modified composite to 10 â¼ 30 min. Furthermore, the addition of SFFs improved the compressive strength of the composite from 5.41 MPa to 9.44 MPa. The composites with both Na2HPO4 and SFFs as curing liquid showed good anti-collapse performance. The weight loss ratio of bone cement was -0.18 â¼ 12.08% in 4 weeks when the content of α-CSH in α-TCP/α-CSH was between 0 â¼ 25 wt%. During the degradation of α-CSH, the amorphous α-TCP were deposited as hydroxyapatite to formed a plate-like products on the surface of composite. Compared to the composite with Na2HPO4 solution as the curing liquid, alkaline phosphatase (ALP) activity of the composites using SFFs as curing liquid were maintained at high levels on the 14th day especially when the Ca/P ratio was 1.7. This study provides a theoretical basis for the regeneration of bone defects guided by bone cement materials.
Assuntos
Sulfato de Cálcio , Fibroínas , Sulfato de Cálcio/química , Fibroínas/química , Cimentos Ósseos/química , Fosfatos de Cálcio/química , DurapatitaRESUMO
For several decades, urinary tract infections caused by catheter-associated devices have negatively impacted not only medical device utilization, but also patient health. As such, the creation of catheter materials with both superior biocompatibility and antibacterial properties has become necessary. This study aimed to produce electrospun membranes based on polylactic acid (PLA) with the incorporation of black phosphorus nanosheets (BPNS) and nano-zinc oxide (nZnO) particles, as well as a mixture of both, in order to design bifunctional membranes with enhanced bioactivity and antibacterial features. The optimum spinning process was determined through examination of various PLA mass concentrations, spinning solution propelling speeds, and receiving drum rotating speeds, with emphasis on the mechanical properties of PLA membranes. Additionally, the antibacterial properties and cytocompatibility of the ZnO-BP/PLA antibacterial membranes were explored. Results demonstrated that the ZnO-BP/PLA antibacterial membranes displayed a rich porous structure, with uniform distribution of nZnO particles and BPNS. With the increase of polylactic acid concentration and the decrease of spinning solution advancing and drum rotation speeds, the mechanical properties of the fiber membrane were significantly improved. Furthermore, the composite membranes exhibited remarkable photothermal therapy (PTT) capabilities when aided by the synergistic effect of BP nanosheets and ZnO. This was achieved through near-infrared (NIR) irradiation, which not only dissipated the biofilm but also enhanced the release capability of Zn2+. Consequently, the composite membrane demonstrated an improved inhibitory effect on both Escherichia coli and Staphylococcus aureus. The results of cytotoxicity and adhesion experiments also indicated good cytocompatibility, with cells growing normally on the surface of the ZnO-BP/PLA antibacterial membrane. Overall, these findings validate the utilization of both BPNS and n-ZnO fillers in the creation of novel bifunctional PLA-based membranes, which possess both biocompatibility and antibacterial properties for interventional catheter materials.
Assuntos
Óxido de Zinco , Humanos , Óxido de Zinco/farmacologia , Óxido de Zinco/química , Antibacterianos/farmacologia , Antibacterianos/química , Poliésteres/química , Catéteres , Ácido LácticoRESUMO
In this study, a bioactive composite material based on calcium sulfate hemihydrate (CSH) bone cement was studied, which use calcium sulfate dihydrate (CSD) as coagulant and silk fibroin nanofibers (SFF) solution as the curing liquid, further loaded vancomycin silk fibroin microspheres (SFM/VCM). The drug release effect of bone cements caused by tuning weight content of SFM/VCM (0.5, 1, 2%) and the concentration of silk fibroin solution (SFS) (20, 60, 100 mg/mL) used for preparation of SFM was studied in this article. Scanning electron microscope (SEM) demonstrated that the average diameter of microspheres gradually increased and the setting time was prolonged with the concentration of SFS increasing. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) were used to analyze the composition of composite materials. The result of compressive strength revealed that the composites contained 0.5% SFM/VCM showed better mechanical performance independent on the concentration of microspheres and the cumulative drug release percentage of all composites were less than 55% after 4 weeks. The drug-loading bone cement possesses not only injectability but also sustained release capability which has a promising prospect in the field of bone substitute material.
Assuntos
Fibroínas , Nanofibras , Cimentos Ósseos , Sulfato de Cálcio/farmacologia , Microesferas , Seda , Vancomicina/farmacologiaRESUMO
Polyamide-6 (PA6) is a synthetic polymer that bears resemblance to collagen in its backbone and has excellent stability in human body fluid. Chitosan (CS) with the similar structure to that of the polysaccharides existing in the extracellular matrix (ECM), has a more suitable biodegradation rate for the formation of new-bone. Electrospun fiber have nanoscale structure, high porosity and large specific surface area, can simulate the structure and biological function of the natural ECM. To meet the requirements of mechanical properties and biocompatibility of bone tissue engineering, electrospun PA6/CS scaffolds were fabricated by electrospinning technology. The mineralized PA6/CS scaffolds were obtained through immersion in 1.5× simulated body fluid (1.5SBF), which allowed the hydroxyapatite (HA) layer to grow into the thickness range under very mild reaction conditions without the need of a prior chemical modification of the substrate surface. The results showed that electrospun PA6/CS fibrous scaffolds in the diameter range of 60-260 nm mimic the nanostructure of the ECM. The tensile strength and modulus of 10PA6/CS fibrous scaffolds reach up to 12.67 ± 2.31 MPa and 95.52 ± 6.78 MPa, respectively. After mineralization, HA particles uniformly distributed on the surface of PA6/CS fibrous scaffolds in a porous honeycomb structure, and the content of mineral was about 40%. In addition, cell culture study indicated that the mineralized PA6/CS composite scaffolds were non-cytotoxic, and had a good biocompatibility and an ability to promote MC3T3-E1 cell attachment and proliferation.
Assuntos
Osso e Ossos/metabolismo , Caprolactama/análogos & derivados , Quitosana/química , Materiais Revestidos Biocompatíveis/química , Durapatita/química , Polímeros/química , Engenharia Tecidual/métodos , Células 3T3 , Animais , Materiais Biocompatíveis/química , Biomimética , Caprolactama/química , Adesão Celular , Proliferação de Células , Sobrevivência Celular , Colágeno/química , Camundongos , Nanoestruturas/química , Osteoblastos/citologia , Porosidade , Pressão , Estresse Mecânico , Especificidade por Substrato , Propriedades de Superfície , Resistência à Tração , Alicerces Teciduais/químicaRESUMO
Open bone fractures in clinical are not only difficult to heal but also at a high risk of infections. Annual cases of fractures which result from osteoporosis amount to approximately 9 million. The objective of this study is to load the antibiotic drug of vancomycin and tune its controlled delivery on a bone repair scaffold material of Mineralized Collagen/poly(lactic acid) (MCP) via changing the crystallinity of poly(lactic acid) to achieve inhibiting infection while repairing defects. We explored the crystallization process of the material during molding and prepared non-crystalline MCP1, MCP2, MCP3 and MCP4 by rapid freeze forming and crystalline MCP5 by tuning temperature decreasing rate. This method can control the micropore structure of the material; and the material changes from brittleness to toughness, which greatly enhances the control of mechanical properties. The drug release behavior of the material was studied for 28 days. Furthermore, the antibacterial property of the material was tested by the zone of inhibition, which shows the material good bacteriostasis. The controllable MCPs are expected to be substitutes for the treatment of infectious bone defects applying to clinical practical treatment.
Assuntos
Preparações Farmacêuticas , Alicerces Teciduais , Colágeno , Liberação Controlada de Fármacos , Poliésteres , Copolímero de Ácido Poliláctico e Ácido PoliglicólicoRESUMO
OBJECTIVES: Consumers' oral physiology and salivary properties are greatly dependent on dietary backgrounds, and this in turn may impact food perception and preferences. Scarce studies are available on the oral physiology and salivary rheology of Chinese participants with different dietary and ethnic backgrounds. DESIGN: This study examined two ethnic groups, Chinese Han and Chinese Mongolian healthy young adults, and explored the differences in oral physiology and salivary rheological properties. Official data suggested that Chinese Mongolians tend to consume more red meat and dairy, and Chinese Han tend to consume more carbohydrates. 200 Han and 104 Mongolian participants were evaluated for the oral physiological and salivary rheological parameters (maximum bite force of incisor and molar teeth, maximum tongue pressure and maximum oral volume; the surface tension, shear viscosity and extensional viscosity of unstimulated and stimulated whole saliva samples). RESULTS: Distinct differences between two ethnic groups were found, particularly in their bite forces and salivary physical properties. Chinese Mongolian participants had significantly higher incisor bite force (168 N) than Chinese Han (146 N). In addition, Chinese Han had significantly lower unstimulated whole saliva flow rate than Chinese Mongolians; and significantly higher salivary surface tension, shear viscosity and extensional viscosity, in both unstimulated and stimulated whole saliva samples. CONCLUSIONS: Chinese Han and Chinese Mongolian participants exhibited different oral physiological and salivary rheological properties; and considering the dietary differences between the two ethnicities, the findings from this study suggest possible associations between dietary habits and oral physiological & saliva rheological properties.
Assuntos
Etnicidade , Reologia , Saliva , Língua , China , Humanos , Pressão , Adulto JovemRESUMO
Periodontal defect poses a significant challenge in orthopedics. Guided Bone Regeneration (GBR) membrane is considered as one of the most successful methods applied to reconstruct alveolar bone and then to achieve periodontal defect repair/regeneration. In this paper, a novel polyamide-6/chitosan@nano-hydroxyapatite/polyamide-6 (PA6/CS@n-HA/PA6) bilayered tissue guided membranes by combining a solvent casting and an electrospinning technique was designed. The developed PA6/CS@n-HA/PA6 composites were characterized by a series of tests. The results show that n-HA/PA6 and electrospun PA6/CS layers are tightly bound by molecular interaction and chemical bonding, which enhances the bonding strength between two distinct layers. The porosity and adsorption average pore diameter of the PA6/CS@n-HA/PA6 membranes are 36.90 % and 22.61 nm, respectively. The tensile strength and elastic modulus of PA6/CS@n-HA/PA6 composites are 1.41 ± 0.18 MPa and 7.15 ± 1.09 MPa, respectively. In vitro cell culture studies demonstrate that PA6/CS@n-HA/PA6 bilayered scaffolds have biological safety, good bioactivity, biocompatibility and osteoconductivity.
Assuntos
Regeneração Óssea , Caprolactama/análogos & derivados , Quitosana/química , Durapatita/química , Membranas Artificiais , Nanoestruturas/química , Polímeros/química , Animais , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Regeneração Óssea/efeitos dos fármacos , Caprolactama/química , Adesão Celular/efeitos dos fármacos , Diferenciação Celular/efeitos dos fármacos , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Camundongos , Nanofibras/química , Nanoestruturas/toxicidade , Porosidade , Propriedades de Superfície , Resistência à TraçãoRESUMO
Type II collagen (Col-II) is one of the important organic components of the cartilage extracellular matrix (ECM). Such natural material is known for its good biocompatibility, but it could not provide a good supporting environment for seed cells due to its rapid degradation and poor strength. In the present work, different contents of Col-II were incorporated into porous polyvinyl alcohol (PVA) to fabricate porous PVA/Col-II composite hydrogels for cartilage tissue engineering. The results illustrate that, after incorporation of Col-II, the elasticity modulus of the composite hydrogels firstly increases, and then decreases (under moisture state). The elasticity modulus of PVA/Col-II (at the ratio of 1:1) hydrogels reaches 11 ± 1.7 KPa, about two-fold higher than pure PVA hydrogels (4.9 ± 0.6 KPa). Meanwhile, all hydrogels exhibit relatively high water content (> 95%) and porosity (> 75%). The degradation analysis indicates that Col-II incorporation induce a high degradation ratio of the composite hydrogels. Cell culture results show PVA/Col-II hydrogels have no negative effects on cells viability and proliferation. The PVA/Col-II hydrogels may possess a potential application in the field of articular cartilage tissue engineering and regeneration.
Assuntos
Materiais Biomiméticos/química , Materiais Biomiméticos/farmacologia , Cartilagem/citologia , Colágeno Tipo II/química , Hidrogéis/química , Álcool de Polivinil/química , Engenharia Tecidual , Cartilagem/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Módulo de Elasticidade , Humanos , Porosidade , Alicerces Teciduais/químicaRESUMO
Saliva is an important component of food oral processing affecting the initial digestion and the formation of food bolus. It has been speculated that salivary biochemical properties could directly influence one's dietary habits, and vice versa. To date, there are few studies that investigate the possible relationships between dietary habits and salivary biochemical properties in Chinese participants from different dietary background. This study examined two Chinese ethnical groups of very different culture of food consumption, Han and Mongolian healthy young participants, as research participants to explore the differences in salivary biochemical properties and possible associations with dietary preferences. Chinese Mongolians tend to consume more red meat and dairy products, and Chinese Han tend to consume more carbohydrates as suggested by official data; therefore, a total of 304 healthy participants (200 Han and 104 Mongolian) were recruited for salivary compositional analysis. Results showed that for Mongolian participants' unstimulated salivary lipolytic activity (0.10 U/mL) and stimulated salivary lipolytic activity (0.09 U/mL) are significantly higher than those of the Han (0.03 U/mL, 0.04 U/mL) (p < 0.01), but their stimulated salivary α-amylase activity (2733 U/mL) was significantly lower than that of Han (3596 U/mL) (p < 0.01). Unstimulated and stimulated salivary total protein content of Chinese Han participants were significantly higher than those of Mongolian participants (p < 0.0001, p = 0.043). These findings have showed our initial hypothesis of possible associations between dietary habits and salivary biochemical properties.
Assuntos
Povo Asiático , Saliva , China , Dieta , Comportamento Alimentar , Humanos , Adulto JovemRESUMO
This study aimed at designing a novel electrospun scaffolding material that structurally and chemically resembles native extracellular matrix for bone tissue engineering. Calcium chloride-complexed polyamide66 (PA66/CaCl2) and pure PA66 electrospun nanofibers were fabricated by the electrospinning method. Scanning electron microscopy, X-ray diffraction, and Fourier transform infrared (FTIR) spectroscopy were used to investigate the effect of the presence of ionized salt in the polymer solution on the mechanical properties and other properties of the electrospun scaffolds. The results show that addition of CaCl2 to PA66 solution can achieve an internal modification and improve the tensile strength and modulus of the polymeric electrospun nanofiber. Ca2+ uploaded through electrospun fibers could provide nucleation sites for the formation of hydroxylapatite (HA) coating. After mineralization, the tensile strength and modulus of HA/PA66/CaCl2 scaffolds reach up to 41.33 ± 16.17 MPa and 168.59 ± 42.20 MPa, respectively. LIVE/DEAD assay shows that compared with pure PA66 scaffolds, a greater density of viable MC3T3-E1 cells were seen on the HA/PA66/CaCl2 scaffolds. Cell Counting Kit-8 results indicate that HA/PA66/CaCl2 scaffolds displays a more favorable ability to promote MC3T3-E1 cell proliferation and growth than that of the other groups with the prolongation of culture time. These results demonstrate that HA/PA66/CaCl2 scaffolds that structurally and chemically resemble native bone have a good cytocompatibility, and might be a potential candidate for bone tissue engineering. [Figure: see text] Impact statement In this work, the calcium chloride-complexed polyamide66 (PA66/CaCl2) hybrid nanofibers were prepared by adding CaCl2 to the PA66 formic acid solution before electrospinning, and then mineralized by saturated calcium phosphate solution. The findings of this study show that the addition of CaCl2 could achieve an internal modification, improve the tensile strength and modulus of the polymeric electrospun nanofiber, and provide nucleation sites for biomimetic mineralization. This research provides insight and foundation of application of mineralized PA66/CaCl2 electrospun scaffolding material that structurally and chemically resembles native extracellular matrix for bone tissue engineering.
Assuntos
Osso e Ossos/citologia , Cloreto de Cálcio/química , Durapatita/química , Nanofibras/química , Nylons/química , Osteoblastos/citologia , Alicerces Teciduais/química , Animais , Materiais Biocompatíveis/química , Células Cultivadas , Camundongos , OsteogêneseRESUMO
Calcium sulfate (CS) bone cements have been used as bone substitutes for a long time, but their clinical use is currently limited due to their rapid degradation rate and brittleness. This work aimed to study the effect of α-tricalcium phosphate (α-TCP) and silk fibroin nanofibers (SFF) on CS bone cements. The bone cements were prepared from α-CS hemihydrate (α-CSH), calcium sulfate dihydrate (CSD; as a setting accelerator) and varying α-TCP contents (0%, 5%, 10%, 15%, 20% and 25%), with SFF solution or deionized water as the solidification solution at the same liquid/solid ratio. Scanning electron microscopy, particle size distribution, x-ray diffraction and Fourier transform infrared spectroscopy were used to measure the composition and characterize the properties of the materials. The compressive strength, setting time and weight loss rate of samples were also tested. Cytotoxicity was evaluated by a Cell Counting Kit-8 assay. The results suggest that the tuning of α-TCP and SFF has an important role in determining the compressive strength and degradation rate of CS bone cements, and the properties could be changed by varying the content of α-TCP. Moreover, cell experiments showed no toxicity of the samples towards MC3T3 cells. Thus, the materials prepared from α-CSH, CSD, α-TCP and SFF in this work could provide the basis for research into CS-based bone repair materials.
Assuntos
Cimentos Ósseos/química , Fosfatos de Cálcio/química , Sulfato de Cálcio/química , Fibroínas/química , Células 3T3 , Implantes Absorvíveis/efeitos adversos , Animais , Engenharia Biomédica , Cimentos Ósseos/toxicidade , Substitutos Ósseos/química , Substitutos Ósseos/toxicidade , Fosfatos de Cálcio/toxicidade , Sulfato de Cálcio/toxicidade , Proliferação de Células/efeitos dos fármacos , Força Compressiva , Fibroínas/toxicidade , Humanos , Teste de Materiais , Camundongos , Microscopia Eletrônica de Varredura , Nanofibras/química , Nanofibras/toxicidade , Nanofibras/ultraestrutura , Tamanho da Partícula , Espectroscopia de Infravermelho com Transformada de Fourier , Propriedades de Superfície , Difração de Raios XRESUMO
Antibacterial composite nanofibers have recently been widely applied in biomedical fields. The purpose of this study is to combine Polyamide66 (PA) with carbon nanotubes (CNTs) and Ag nanoparticles through electrospinning and the aqueous reduction method to synthesis Ag@CNT/PA composite nanofibers with excellent conductivity, antibacterial property and cytocompatibility. The morphology and structure of Ag@CNT/PA composite nanofibers were analyzed by a series of characterizations. Conductivity of Ag@CNT/PA composite nanofibers in wet state was measured using a four-probe resistance tester. The antibacterial activity of Ag@CNT/PA composite nanofibers was tested by inhibition zone method, and the MG-63 cells were used to detect the cytotoxicological effects of the composite nanofibers. The results show that the Ag nanoparticles (50-100 nm) are distributed uniformly on the surface of nanofibers. Conductivity of Ag@CNT/PA composite nanofibers reaches (9.918 ± 0.043) × 10-4 S mm-1, significantly higher than that of PA nanofibers ((1.486 ± 0.017) × 10-4 S mm-1). The Ag@CNT/PA composite fibers present good antibacterial activity against Escherichia coli and Staphylococcus aureus. Cell culture results show that the cell proliferation of Ag@CNT/PA composite nanofiber group seems no significant difference with PA nanofiber group (p > 0.05) at day 7. The Ag@CNT/PA composite nanofibers have no significant negative effects on MG-63 cells.
Assuntos
Antibacterianos/química , Materiais Biocompatíveis/química , Nanofibras/química , Nanotubos de Carbono/química , Nylons/química , Prata/química , Antibacterianos/farmacologia , Materiais Biocompatíveis/farmacologia , Linhagem Celular , Escherichia coli/efeitos dos fármacos , Infecções por Escherichia coli/prevenção & controle , Humanos , Nanopartículas Metálicas/química , Nanopartículas Metálicas/ultraestrutura , Nanofibras/ultraestrutura , Nanotubos de Carbono/ultraestrutura , Nylons/farmacologia , Prata/farmacologia , Infecções Estafilocócicas/prevenção & controle , Staphylococcus aureus/efeitos dos fármacosRESUMO
PURPOSE: The verification of the best length of root canal instrumentation and obturation is still controversial in endodontics. The purpose of this study was to determine the influence of root canal working length on the clinical effect evaluated by periapical radiography and cone-beam computed tomography (CBCT). METHODS: A total of 503 root canal obturations were evaluated by using periapical radiography and CBCT. Distances from the radiographic apex to the tip of filling material were measured and classified as 1-2 mm, less than 1 mm, beyond apex, and at the apex. Odds ratio, confidence intervals, and Chi-square test were used for statistical analyses with SPSS 13.0 software package. RESULTS: Periapical radiographs showed that root canal obturations were 1-2 mm short of the apex in 88%, 89.3%, and 95% of the anterior teeth, premolars, and molars, respectively. CBCT images showed obturations had the same length in 70%, 73.7%, and 79% of anterior teeth, premolars, and molars, respectively. The frequency of AP was significantly greater in molars than in the other tooth, regardless of diagnostic tools. AP was detected more frequently when CBCT was used. CONCLUSIONS: AP is detected at all lengths of root canal obturation. The analysis of diagnostic methods show that AP is detected more frequently using CBCT.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Cavidade Pulpar , Obturação do Canal Radicular , Dente Pré-Molar , Humanos , Dente Molar , Tratamento do Canal Radicular , DenteRESUMO
The leafhopper Psammotettix striatus (L.) (Hemiptera: Cicadellidae), is one of the most significant economic pests of wheat in Western China. This insect vectors a phytoplasma that causes wheat blue dwarf (WBD), a severe disease limiting wheat production in the Western China. A microscopic analysis of the ultrastructure of the mouthparts of the adult was conducted using scanning electron microscopy and the putative functions of the mouthparts were determined. The piercing-sucking mouthparts of P. striatus are of the conventional type comprising a three-segmented labium with a deep groove in the anterior side, a stylet fascicle consisting of two mandibular and two maxillary stylets, and an uppermost small cone-shaped labrum. The mandibular stylets, located laterad of the maxillary stylets, have sculpture on their tips, which may function in tearing plant tissue, cutting channels into the plant tissues, and attaching the body to the host plant during molting. The maxillary stylets are interlocked to form two separate compartments, a larger food canal and a smaller salivary canal. Two dendritic canals are also found in each maxilla and one in each mandible. Four kinds of sensilla were found on the labium: s. trichodea I, s. trichodea II, s. basiconic I, s. basiconic II. These may be involved in host recognition and are likely chemo- or mechanosensory, or both.