[Efficacy and radiology evaluation of pulpotomy in mature permanent teeth].

OBJECTIVE: To observe the clinical efficacy of pulpotomy in patients of different ages and to explore the occurrence and characteristics of pulpal calcification. METHODS: A total of 77 patients who underwent pulpotomy for mature permanent premolars and molars with caries-derived pulp exposure in the Department of General Dentistry, Peking University School and Hospital of Stomatology from October 2019 to August 2022 were selected. Pulpotomies were performed in a single visit using iRoot BP Plus bioceramic material as pulp capping agent. The patients were divided into three groups according to age: 25 cases in the adolescent group (11-20 years old) with a mean age of (15.88±2.19) years; 27 cases in the middle-aged group (21-50 years old) with a mean age of (34.59±8.67) years; and 25 cases in the elder-aged group (51-83 years old) with a mean age of (63.84±7.40) years. The patients were reviewed 1 year after the operation to evaluate the clinical efficacy and to record the formation of calcified bridge, thickness of calcified bridge, and pulp calcification index (PCI). RESULTS: There was no statistically significant difference between the three groups in terms of gender, dentition, and tooth position (P > 0.05). The 1-year postoperative follow-up rate was 85.71% (66/77), including 88.00% (22/25) in the adolescent group, 85.19% (23/27) in the middle-aged group, and 84.00% (21/25) in the elder-aged group. The 1-year follow-up clinical success rates of the three groups were 95.45% (21/22), 91.30% (21/23), and 95.24% (20/21), respectively, with no statistically significant difference (P>0.05). Among the clinical success cases, calcified bridges appeared in 12 cases (57.14%, 12/21) in the adolescent group, 8 cases (38.10%, 8/21) in the middle-aged group, and 3 cases (15.00%, 3/20) in the elder-aged group, with statistically significant differences (χ2= 7.810, P = 0.020 < 0.05). The difference was statistically significant (F = 4.434, P = 0.020 < 0.05) when comparing the thickness of calcified bridges among the three groups. Calcified bridge thickness was negatively correlated with age (r = -0.516, P < 0.05). The changes in pulpal calcification index ΔPCI were 0.67 ± 0.58, 0.43 ± 0.51, and 0.25 ± 0.52, respectively, with statistically significant differences among the three groups (F = 3.404, P = 0.040 < 0.05). CONCLUSION: Pulpotomy for caries-derived pulp exposure in elderly patients could also achieve a high success rate. The incidence of calcified bri-dges after pulpotomy and the acceleration of pulpal calcification were age-related. The adolescent group was more likely to form calcified bridges and also showed more pronounced accelerated root canal calcification.

Treatment Durations and Whitening Outcomes of Different Tooth Whitening Systems.

Background and Objectives: Tooth whitening is a relatively conservative and effective option to treat discolored teeth. However, questions remain whether in-office or at-home tooth whitening products with short treatment durations are as effective and stable as products with longer treatment durations. Materials and Methods: Forty human third molars with intact enamel surfaces were divided into four groups of ten each, subjected to discoloration challenges with coffee for 60 h, and they were treated with four professional tooth whitening systems: two for take-home use-6% hydrogen peroxide for 30 min/d for a total of 7 h in 14 days (HP6), 10% carbamide peroxide for 10 h/d for 140 h in 14 days (CP10), as well as two for in-office use-35% HP for 10 min × 3 (HP35) for a total of 30 min and 40% HP for 20 min × 3 (HP40) for a total of 60 min. Teeth colors were assessed in the CIE L*a*b* color space with a spectrophotometer immediately and six months after whitening treatments. Surface roughness (Sa) for the treated and untreated enamel surfaces of the teeth in all groups were evaluated with a three-dimensional laser scanning microscope after six months. Results: No significant differences were found between HP6 and CP10 groups immediately after whitening (∆E 10.6 ± 1.6 vs. 11.4 ± 1.7, p > 0.05) and at six months after treatments (∆E 9.0 ± 1.9 vs. 9.2 ± 2.5, p > 0.05), or between HP35 and HP40 groups immediately after whitening (∆E 5.9 ± 1.2 vs. 5.3 ± 1.7, p > 0.05) and at six months after treatments (∆E 7.2 ± 1.6 vs. 7.7 ± 1.3, p > 0.05). The two at-home whitening systems achieved significantly better whitening outcomes than the two in-office products immediately after whitening (p < 0.05). However, at six months after treatments, the differences between at-home and in-office treatments had narrowed significantly (p > 0.05). There were no statistically significant differences with respect to the Sa values between the treated and untreated surfaces (p > 0.05). Conclusions: Tooth whitening products in the same product category have similar whitening efficacies, despite significant differences in treatment durations (7 vs. 140 h, and 30 min vs. 60 min, respectively). Take-home products achieved better whitening outcomes than in-office products, but they needed 14 to 280 times longer treatment durations.

Effects of whitening toothpaste and bleaching treatment on resin composite discoloration caused by cigarette smoke and electronic vapor aerosol.

PURPOSE: To compare the effects of whitening toothpaste and bleaching with 6% hydrogen peroxide (H2O2) on discoloration of dental resin composite caused by cigarette smoke (CS) and electronic vapor product (EVP) aerosol. METHODS: 40 resin composite discs were divided into three groups: 15 each for CS and EVP aerosol exposure and 10 for air exposure (control). Exposures were performed for 15 days, with daily brushing with regular toothpaste. Two whitening sessions, including 21 days of brushing with whitening toothpaste and 3 days of treatments with take-home bleaching (6% H2O2), were performed after the exposure. Color and gloss were assessed before exposure, at every 5 days of exposure, and after each whitening session. RESULTS: After 15 days of exposure, marked discoloration of resin composite was observed in the CS group (ΔE = 23.66 ± 2.31), minimal color change in the EVP group ((ΔE = 2.77 ± 0.75), and no color change in the control group. Resin composites exposed to CS did not recover their original color after treatment with whitening toothpaste ((ΔE = 20.17 ± 2.68) or take-home bleaching ((ΔE = 19.32 ± 2.53), but those exposed to EVP aerosol reverted to baseline after treatment with whitening toothpaste ((ΔE = 0.98 ± 0.37), and no further change in color was observed following take-home bleaching. The gloss of resin composites exposed to CS, EVP aerosol, and air decreased equally with exposure time. Brushing with whitening toothpaste recovered the gloss similarly in all groups, but no further change was observed following take-home bleaching. CLINICAL SIGNIFICANCE: Aerosol from electronic vapor products induced minimal discoloration of resin composites that can be completely reverted by brushing with whitening toothpaste alone. Bleaching with 6% H2O2 did not revert discoloration caused by cigarette smoke. Whitening toothpaste could help revert the decreased gloss of resin composites.

Effects of desensitizing dentifrices on dentin tubule occlusion and resistance to erosive challenges.

BACKGROUND: Many studies have demonstrated efficacy of casein phosphopeptide (CPP) containing products for dentin tubule occlusion for treatment of dentin sensitivity, but their effectiveness under dynamic erosive challenges remains to be elucidated. The purpose of the present study was to investigate the effectiveness of a desensitizing dentifrice containing CPP in occluding dentin tubules and resisting erosive challenges in comparison to that containing polyvinyl methyl ether/maleic acid (PVM/MA) copolymers. METHODS: A total of 33 dentin discs were prepared from coronal sections of human third molars and divided into 3 groups: a toothpaste containing CPP; a toothpaste containing PVM/MA and submicron silica; and a regular toothpaste (Controls). A soft-bristle toothbrush was used to brush the dentin discs with the dentifrices for 45 strokes in 30 s at a force of approximately 200 g. The brushing cycle was repeated after immersion of the dentin discs in artificial saliva overnight. The dentin discs were then challenged in orange juice for 10 min in an incubator rocking at 120 rpm. Three fields were randomly selected on each dentin disk surface to assess dentin tubule occlusions after each brushing cycle and after orange juice challenge with a 3D laser scanning microscope. Specimen cross sections were examined with a scanning electron microscope equipped with energy dispersive spectroscopy (SEM/EDS). RESULTS: After the first and second cycles of brushing, dentin tubules were occluded on average by 56.3% and 85.7% in CPP group, 66.2% and 88.1% in PVM/MA group, and 0.0 and 13.0% in the controls, respectively. There were no statistically significant differences in dentin tubule occlusions between the CPP and PVM/MA groups after two cycles of brushing (p>0.05). After dynamic erosive challenges with orange juice, 20.3% of the dentin tubules in the CPP group, 79.1% in the PVM/MA group and none in the control remained occluded (P<0.05). SEM/EDS imaging showed that dentin tubules were blocked with plugs containing dentifrice substances in CPP and PVM/MA groups after treatments, but none in the controls. CONCLUSIONS: Desensitizing dentifrices containing CPP or PVM/MA could effectively occlude dentin tubules after two cycles of brushing. PVM/MA in combination with submicron silicon dioxide exhibited stronger resistance to dynamic erosive challenges by acidic beverages. Inorganic fillers that can enter dentin tubules and resist erosive challenges may be key for desensitizing dentifrices.

Effectiveness of resin-based materials against erosive and abrasive enamel wear.

OBJECTIVE: The objective of this study was to test the effectiveness of resin-based materials against erosive enamel wear under erosive and abrasive challenges by orange juice and tooth brushing. METHODS: Fifty enamel specimens from third molars were assigned to five groups: ICON resin infiltration with no etching (ICON-NE), ICON resin infiltration with 15 % HCl etching (ICON-AE), Seal & Protect sealant (S&P), Tetric EvoFlow (TEF), and control. Erosive lesions were first created on enamel, then treated with resin-based materials. Erosive and abrasive challenges by orange juice and tooth brushing were repeated after treatments. Erosive wear of the treated areas was measured with 3D scanning microscopy, and data were analyzed using ANOVA and paired t tests. RESULTS: Treatments with ICON, S&P, and TEF created a protective material coating of 4.5 ± 1.9 µm, 44.3 ± 8.1 µm, and 84.6 ± 15.7 µm in thickness on the lesion surfaces, respectively. After 15 cycles of erosive and abrasive challenges, enamel or material losses were 21.9 ± 2.3 µm for control, 24.5 ± 4.0 µm for ICON-NE, 24.6 ± 7.4 µm for ICON-AE, 11.2 ± 4.1 µm for S&P, and 3.9 ± 1.9 µm for TEF, respectively. The protective coatings were completely lost in the ICON infiltration groups but remained intact in both the S&P and TEF groups after erosive and abrasive challenges. CONCLUSION: In contrast to a resin sealant and a flowable composite, ICON infiltration resin was not effective in protecting enamel surfaces from erosive and abrasive wear. CLINICAL RELEVANCE: Sealant and flowable composite resin may create protective coatings on eroded enamel surfaces and prevent further tissue loss.

Effects of cigarette smoking on color stability of dental resin composites.

PURPOSE: To study the effects of cigarette smoke (CS) on the discoloration of dental resin composite compared with the aerosol from a heat-not-burn tobacco product, the Tobacco Heating System 2.2 (THS2.2). METHODS: A total of 60 discs were prepared from three commercial resin composites: Durafill VS (DVS), Filtek Supreme Ultra (FSU) and Tetric EvoCeram BulkFill (TEC). Twenty discs of each composite were divided into two groups and exposed to CS from 20 reference cigarettes (3R4F) or aerosol from 20 THS2.2 tobacco sticks per day for 3 weeks. Color, gloss and surface roughness of the composite discs were measured at baseline and after exposure and brushing with toothpaste at 1, 2 and 3 weeks. RESULTS: Color differences from the baseline (ΔE) were on average 27.1 (±3.6) in 3R4F and 3.9 (±1.5) in the THS2.2 group after 3 weeks of exposure (P< 0.0001). TEC (30.4±1.4 and FSU (28.0 ±2.5) exhibited more discoloration than DVS (23.0±1.2) in the 3R4F group (P< 0.0001). FSU (2.6 ±0.5) showed significantly less discoloration than TEC (5.3±1.5) in the THS2.2 group (P< 0.0001). Surface roughness of resin composites was not affected by either CS or THS2.2 aerosol, while surface gloss increased in the composite discs with more severe discoloration. CLINICAL SIGNIFICANCE: Cigarette smoke caused significant discoloration of dental composite resins. Reducing or eliminating the deposits derived from combustion of tobacco has the potential to minimize the impact of smoking on the color of composite resin restorations.

[Surface roughness and staining stability of infiltrant resin for enamel white spot lesion].

OBJECTIVE: To investigate the influence factors on the surface roughness and staining susceptibility of infiltrant resin. METHODS: In the study, 30 human third molars were used, and each sample had three open enamel windows. The samples were randomly divided into three groups according to their different demineralized time. Each sample had at least one intact spot (A), one infiltrant resin spot (B) and one artificial white spot lesion (C). The surface roughness was tested before color staining for all the three spots of each specimen. The specimens were stored in a staining solution (coffee) for a period of 21 days, before and after which the color Commission Internationaled' Eclairage (CIE)L*a*b* was recorded for A, B and C spots. RESULTS: The B spot's surface roughness of each group was(0.15 ± 0.02)µm,(0.31 ± 0.03)µm and(0.40 ± 0.02)µm, respectively. And the C spot's surface roughness each was (1.08 ± 0.10)µm,(2.89 ± 0.13)µm and(3.41 ± 0.14)µm. The surface roughness of B and C of the three groups increased with demineralization time longer, and had significant difference for both B and C (P < 0.01). The ΔE of the three groups between A and B before staining had significant difference (P < 0.01). And the ΔE of group1 was less than 3.7, but the other two groups' more than 3.7. After staining, the ΔE of groups 1 and 2 was less than 3.7 but that of group 3 was more than 3.7. There were significant differences between groups 1 and 3, and also between groups 2 and 3(P < 0.01). CONCLUSION: The degree of the lesion's demineralization has effect on the surface roughness and color susceptibility of infiltrant resin. The increased surface roughness of infiltrant resin has positive effect on masking enamel white spots.

Anisotropic composite aerogel with thermal insulation and flame retardancy from cellulose nanofibers, calcium alginate and boric acid.

With the increasing severity of energy shortages and environmental pollution, there is an urgent need for advanced thermal insulation materials with excellent comprehensive performance, including low thermal conductivity, high flame resistance, and strong compressive strength. Herein, an anisotropic composite aerogel based on cellulose nanofibers (CNF), calcium alginate (CA), and boric acid (BA) is fabricated using a directional freeze-drying strategy. The CA and BA, as double cross-linking agents, associated with oriented porous structure provide the resultant aerogel with good mechanical strength. Additionally, self-flame retardant CA and BA act as synergistic flame retardants that endow the aerogel with excellent flame retardance properties such as a limiting oxygen index value of 44.2 %, UL-94 V-0 rating, and low heat release. Furthermore, this composite aerogel exhibits outstanding thermal insulation performance with a low thermal conductivity of approximately 30 mW m-1 K-1. Therefore, the composite aerogel is expected to have a wide potential application in areas such as construction, automotive industry, batteries, petrochemical pipelines, and high-temperature reaction devices.

KIF5B-mediated internalization of FMDV promotes virus infection.

Foot-and-mouth disease (FMD) is a highly contagious and economically important disease, which is caused by the FMD virus (FMDV). Although the cell receptor for FMDV has been identified, the specific mechanism of FMDV internalization after infection remains unknown. In this study, we found that kinesin family member 5B (KIF5B) plays a vital role during FMDV internalization. Moreover, we confirmed the interaction between KIF5B and FMDV structural protein VP1 by co-immunoprecipitation (Co-IP) and co-localization in FMDV-infected cells. In particular, the stalk [amino acids (aa) 413-678] domain of KIF5B was indispensable for KIF5B-VP1 interaction. Moreover, overexpression of KIF5B dramatically enhanced FMDV replication; consistently, knockdown or knockout of KIF5B suppressed FMDV replication. Furthermore, we also demonstrated that KIF5B promotes the internalization of FMDV via regulating clathrin uncoating. KIF5B also promotes the transmission of viral particles to early and late endosomes during the early stages of infection. In conclusion, our results demonstrate that KIF5B promotes the internalization of FMDV via regulating clathrin uncoating and intracellular transport. This study may provide a new therapeutic target for developing FMDV antiviral drugs.

Rough Nanovaccines Boost Antitumor Immunity Through the Enhancement of Vaccination Cascade and Immunogenic Cell Death Induction.

Nanovaccines have attracted intense interests for efficient antigen delivery and tumor-specific immunity. It is challenging to develop a more efficient and personalized nanovaccine to maximize all steps of the vaccination cascade by exploiting the intrinsic properties of nanoparticles. Here, biodegradable nanohybrids (MP) composed of manganese oxide nanoparticles and cationic polymers are synthesized to load a model antigen ovalbumin to form MPO nanovaccines. More interestingly, MPO could serve as autologous nanovaccines for personalized tumor treatment taking advantage of in situ released tumor-associated antigens induced by immunogenic cell death (ICD). The intrinsic properties of MP nanohybrids including morphology, size, surface charge, chemical, and immunoregulatory functions are fully exploited to enhance of all steps of the cascade and induce ICD. MP nanohybrids are designed to efficiently encapsulate antigens by cationic polymers, drain to lymph nodes by appropriate size, be internalized by dendritic cells (DCs) by rough morphology, induce DC maturation through cGAS-STING pathway, and enhance lysosomal escape and antigen cross-presentation through the "proton sponge effect". The MPO nanovaccines are found to efficiently accumulate in lymph nodes and elicit robust specific T-cell immune responses to inhibit the occurrence of ovalbumin-expressing B16-OVA melanoma. Furthermore, MPO demonstrate great potential to serve as personalized cancer vaccines through the generation of autologous antigen depot through ICD induction, activation of potent antitumor immunity, and reversal of immunosuppression. This work provides a facile strategy for the construction of personalized nanovaccines by exploiting the intrinsic properties of nanohybrids.

Polycation-Carbon Nanohybrids with Superior Rough Hollow Morphology for the NIR-II Responsive Multimodal Therapy.

Polymer-inorganic hybrid nanomaterials have attracted much attention for the multimodal cancer therapy, while it is still desirable to explore hybrids with superior morphologies for two or more therapeutic modalities. In this work, four types of carbon nanoparticles with distinct morphologies were prepared by an elaborate template-carbonization corrosion process and then functionalized with a similar amount of the superior polycationic gene vector, CD-PGEA [consisting of one ß-cyclodextrin core (CD) and two cationic ethanolamine-functionalized poly(glycidyl methacrylate) (PGEA) arms] to evaluate the morphology-influenced gene and photothermal (PT) therapy. Benefiting from the starting rough hollow nanosphere (RHNS) core, the resultant nanohybrids RHNS-PGEA exhibited the highest gene transfection (including luciferase, fluorescent protein plasmid, and antioncogene p53) and NIR PT conversion efficiency among the four types of nanohybrids. Moreover, the efficient PT effect endowed RHNS-PGEA with PA imaging enhancement and an effective imaging guide for the tumor therapy. In addition, anticancer drug 10-hydroxy camptothecin was successfully encapsulated in RHNS with polycation coating, which also displayed the second near-infrared (NIR-II)-responsive drug release. Taking advantages of the superior gene delivery/PT effect and NIR-II-enhanced drug delivery, RHNS-PGEA realized a remarkable therapeutic effect of trimodal gene/PT/chemotherapy of malignant breast cancer treatment in vitro and in vivo. The present work offers a promising approach for the rational design of polymer-inorganic nanohybrids with superior morphology for the multimodal cancer therapy.

Titanium particles induce apoptosis by promoting autophagy in macrophages via the PI3K/Akt signaling pathway.

Chronic inflammation and infection in the tissue surrounding implants after total joint replacement is closely associated with the innate immune response to surgical implants. Wear particles are known to increase apoptosis and impair the innate immunity in macrophages, which can cause immunosuppression around the implants. Excessive autophagy can induce apoptosis. However, the link between autophagy and apoptosis in macrophages during chronic inflammation and infection remains unknown. In this study, we investigated the autophagy and apoptosis induced by titanium particles in RAW264.7 macrophages, and in the interface membrane of patients with late-onset periprosthetic joint infection (PJI). We found that titanium particles stimulated autophagy and apoptosis in macrophages. Inhibition of autophagy significantly reduced titanium particle-induced apoptosis in macrophages, which may be related to the PI3K/Akt signaling pathway. The secretion of inflammatory factors, such as IL-1ß, IL-6, and TNF-α, decreased after inhibition of autophagy in titanium particle-stimulated macrophages, which may be caused by immune dysfunction due to titanium particle-induced autophagy and apoptosis in macrophages. Furthermore, our in vivo mouse calvarial model also showed that autophagy inhibitors lowered the rate of cell apoptosis. Our findings indicate that wear particle-induced apoptosis may be caused by enhanced autophagy in macrophages, which could potentially impair the local innate immunity in periprosthetic tissues and could be a risk factor for PJI. Based on these results, autophagy modulators may act as a new therapeutic option for PJI.

Analysis of chemical deposits on tooth enamel exposed to total particulate matter from cigarette smoke and tobacco heating system 2.2 aerosol by novel GC-MS deconvolution procedures.

Tobacco smoking contributes to tooth discoloration. Pigmented compounds in the smoke generated by combustion of tobacco can cause discoloration of dental hard tissues. However, aerosols from heated tobacco products cause less discoloration than cigarette smoke (CS) in vitro. The objective of the present study was to optimize a method for extracting the colored chemical compounds deposited on tooth enamel following exposure to total particulate matter (TPM) from CS or a heated tobacco product (Tobacco Heating System [THS] 2.2), analyze the extracts by gas chromatography coupled to time-of-flight mass spectrometry, and identify the key chemicals associated with tooth discoloration. Sixty bovine enamel blocks were exposed for 2 weeks to TPM from CS or THS 2.2 aerosol or to artificial saliva as a control. Brushing without toothpaste and color measurements were performed each week. Noticeable discoloration of enamel was observed following exposure to CS TPM. The discoloration following exposure to THS 2.2 aerosol TPM or artificial saliva was not distinguishable to the eye (ΔE < 3.3). Carbon disulfide was used to extract surface-deposited chemicals. Untargeted analyses were followed by partial least squares correlation against discoloration scores (R2 = 0.96). Eleven compounds had variable importance in projection scores greater than 2. Discriminant autocorrelation matrix calculation of their mass spectral information identified eight of the eleven compounds as terpenoids. None of the compounds were related to nicotine. Several of these compounds were also detected in THS 2.2 aerosol TPM-exposed enamel, but at lower levels, in line with our findings showing less discoloration. Compared with CS TPM exposure, THS 2.2 aerosol TPM exposure resulted in lower deposition of color-related compounds on enamel surface, consistent with minimal discoloration of dental enamel.

[Evaluation of the color stability of infiltrant resin in comparison to aesthetic composite resins].

OBJECTIVE: To investigate the color stability of infiltrant resin together with three other composites exposed to staining solution. METHODS: Three types of anterior aesthetic composite resins (Filtek Z250, Filtek Z350 XT, and Beautiful Flow Plus F00) and artificial caries with Icon infiltrant resin were used. The samples were randomly divided into two groups (each contained 10 specimens): coffee solution and distilled water immersion for three weeks. Color parameters were deter-mined with the Crystaleye spectrophotometer. RESULTS: Artificial caries lesions infiltrated by Icon showed much higher ΔE than those infiltrated by other aesthetic resins (P<0.05). The discoloration of all the experimental resins and the artificial caries infil-trated with Icon increased with time, but the discoloration on the 1st week was significantly higher than those on the 2nd and 3rd weeks. CONCLUSIONS: Artificial caries infiltrated with Icon was more vulnerable and susceptive to food color than those infiltrated with other aesthetic composite resins.

Effects of cigarette smoke and tobacco heating aerosol on color stability of dental enamel, dentin, and composite resin restorations.

OBJECTIVES: To test if cigarette smoke (CS) causes discoloration of enamel, dentin, and composite resin restorations and induces color mismatch between dental hard tissues and the restorations, and to compare the findings with the effects of aerosol generated by the tobacco heating system (THS) 2.2. METHOD AND MATERIALS: Twenty-two human premolars were prepared with Class V cavities restored with Filtek Supreme Ultra (3M Espe) composite resin. Teeth were divided into two groups and exposed to either CS from 20 reference cigarettes (3R4F) or aerosol from 20 THS 2.2 tobacco heat sticks 4 days a week for 3 weeks. CIE L*a*b* color was assessed before and after exposure and brushing at 1, 2, and 3 weeks. Color match, marginal discoloration, marginal integrity, and surface texture of the Class V restoration were assessed according to a modified US Public Health Service (USPHS) criterion. RESULTS: Marked discoloration of enamel and dentin was observed following 3 weeks of CS exposure (ΔE = 8.8 ± 2.6 and 21.3 ± 4.4, respectively), and color mismatch occurred between the composite resin restorations (ΔE = 25.6 ± 3.8) and dental hard tissues. Discoloration was minimal in the enamel, dentin, and composite resin restorations in the THS 2.2 group, and no color mismatch was observed after 3 weeks of THS 2.2 aerosol exposure. CONCLUSION: CS causes significant tooth discoloration and induces color mismatch between dental hard tissues and composite resin restorations. Reducing or eliminating the deposits derived from tobacco combustion could minimize the impact of tobacco products on tooth discoloration.

Effects of different discoloration challenges and whitening treatments on dental hard tissues and composite resin restorations.

OBJECTIVES: To compare the relative effects of cigarette smoke (CS), electronic cigarette (EC), red wine, coffee, and soy sauce on the color of enamel, dentin, and composite resin restorations, as well as the effects of whitening treatments. METHODS: Seventy premolars with composite restorations were exposed to CS, EC aerosol (a novel EC device with MESH™ technology [P4M3 version 1.0, Philip Morris International]), red wine, coffee, and soy sauce for 56 min/day for 15 days. Two whitening sessions with 6% and 35% hydrogen peroxide (H2O2) were performed on the exposed samples. Teeth exposed to CS and EC aerosol were also brushed with whitening toothpaste for 3 weeks. Color match of resin restorations was assessed, and color changes were compared after exposure and after whitening treatments. RESULTS: Discolorations in enamel, dentin, and composite resin were observed in the order of red wine > CS > soy sauce > coffee > EC. Color mismatch between enamel and resin restorations occurred only in red wine and CS groups. Brushing with whitening toothpaste removed discoloration caused by EC aerosol; H2O2 treatments were necessary to eliminate discolorations caused by coffee and soy sauce. Discolorations of dentin and resin restorations could not be completely removed by whitening treatments, and color mismatch remained in teeth exposed to red wine and CS. CONCLUSION: Red wine and CS cause significant tooth discoloration and color mismatch in enamel and resin restorations that are not reversible by whitening treatments. Tooth discoloration associated with EC aerosol was minimal and could be removed by brushing with whitening toothpaste. CLINICAL SIGNIFICANCE: Red wine drinkers and cigarette smokers have increased risks for tooth discoloration and color mismatch between enamel and composite resin restorations. Whitening treatments may not be effective in correcting the color mismatch. Tooth discoloration associated with EC aerosol is minimal.

Protective effects of resin sealant and flowable composite coatings against erosive and abrasive wear of dental hard tissues.

OBJECTIVES: To test the effectiveness of sealant and flowable composite coating on eroded enamel, dentin and cementum under erosive/abrasive challenges in vitro. METHODS: A total of 108 tissue sections (36 each for enamel, dentin and cementum) from third molars were assigned to three groups: Seal & Protect sealant (S&P), Tetric EvoFlow composite (TEF) and control. Erosive/abrasive lesions were created on each specimen by citric acid and brushing with toothpaste. S&P and TEF were applied to the lesions and subjected to erosive/abrasive cycling included 24 cycles of immersion in citric acid (pH 3.6) for 60min, followed by remineralization for 120min and brushing with toothpastes for 600 strokes at 150g. Erosive wear of materials or dental tissues were measured with 3D scanning microscopy and data were analyzed using ANOVA. RESULTS: Treatments with S&P and TEF created a protective material coating of 42.7±17.8µm and 150.8±9.9µm in thickness, respectively. After 24 cycles of erosive/abrasive challenges, tissue losses were -346.9±37.3µm for enamel, -166.5±26.3µm for dentin and -164.7±18.2µm for cementum in untreated controls, as compared to material losses of -24.4±3.3µm for S&P, and -10.8±4.4µm for TEF, respectively. Both S&P and TEF were effective in protecting enamel, dentin and cementum against erosive tooth wear (p<0.01). S&P exhibited faster wear than TEF (p<0.01) and showed spotted peeling in a third of the specimens. TEF remained intact on all three types of dental tissues at the end of the 24 cycles of erosive/abrasive challenges. CONCLUSIONS: A thin coating of flowable composite resin 150µm in thickness may provide long-term protection against erosive/abrasive tooth wear. Resin sealant may provide adequate protection for dental hard tissues in short-term and may require repeated applications if long-term protection is desired.

Candida albicans Carriage in Children with Severe Early Childhood Caries (S-ECC) and Maternal Relatedness.

INTRODUCTION: Candida albicans has been detected together with Streptococcus mutans in high numbers in plaque-biofilm from children with early childhood caries (ECC). The goal of this study was to examine the C. albicans carriage in children with severe early childhood caries (S-ECC) and the maternal relatedness. METHODS: Subjects in this pilot cross-sectional study were recruited based on a convenient sample. DMFT(S)/dmft(s) caries and plaque scores were assessed during a comprehensive oral exam. Social-demographic and related background information was collected through a questionnaire. Saliva and plaque sample from all children and mother subjects were collected. C. albicans were isolated by BBL™ CHROMagar™ and also identified using germ tube test. S. mutans was isolated using Mitis Salivarius with Bacitracin selective medium and identified by colony morphology. Genetic relatedness was examined using restriction endonuclease analysis of the C. albicans genome using BssHII (REAG-B). Multilocus sequence typing was used to examine the clustering information of isolated C. albicans. Spot assay was performed to examine the C. albicans Caspofungin susceptibility between S-ECC children and their mothers. All statistical analyses (power analysis for sample size, Spearman's correlation coefficient and multiple regression analyses) were implemented with SAS 9.4. RESULTS: A total of 18 S-ECC child-mother pairs and 17 caries free child-mother pairs were enrolled in the study. Results indicated high C. albicans carriage rate in the oral cavity (saliva and plaque) of both S-ECC children and their mothers (>80%). Spearman's correlation coefficient also indicated a significant correlation between salivary and plaque C. albicans and S. mutans carriage (p<0.01) and caries severity (p<0.05). The levels of C. albicans in the prepared saliva and plaque sample (1ml resuspension) of S-ECC children were 1.3 ± 4.5 x104 cfu/ml and 1.2 ± 3.5 x104 cfu/ml (~3-log higher vs. caries-free children). Among 18 child-mother pairs, >60% of them demonstrated identical C. albicans REAG-B pattern. C. albicans isolated from >65% of child-mother pairs demonstrated similar susceptibility to caspofungin in spot assay, while no caspofungin resistant strains were seen when compared with C. albicans wild-type strain SC5314. Interestingly, the regression analysis showed that factors such as antibiotic usage, birth weight, inhaler use, brushing frequency, and daycare attendance had no significant effect on the oral carriage of C. albicans in the S-ECC children. CONCLUSIONS: Our results reveal that both the child with S-ECC and the mother were highly infected with C. albicans, while most of the strains were genetically related, suggesting that the mother might be a source for C. albicans acquisition in the oral cavity of children affected by the disease.

[Effect of resin infiltration treatment on the colour of white spot lesions].

OBJECTIVE: This study aimed to evaluate the effect of resin infiltration and fluoride solution on masking different demineralized white spot lesions by assessing color change. METHODS: Artificial white spot lesions were produced on 60 human molars. Each sample had at least two enamel surfaces opened (named A and B). The samples were randomly divided into groups 1, 2, and 3 according to their time of demineralization (24, 48, and 72 h). After demineralization, the A spot of each sample was treated by resin infiltration. The B spot was treated with 0.1% fluoride solution daily for 30 days. After the remineralization of the B spot, resin infiltration was used again on the B spot of each sample. Color assessment was performed by a spectrophotometer in five distinct stages: baseline, after the production of artificial caries, after resin infiltration of A spots, after 30 days of fluoride solution treatment of B spots, and after resin infiltration of remineralized B spots. RESULTS: Before demineralization, the L* values of spots A and B in all groups were not significantly different (P > 0.05), whereas the L* values of spots A and B were significantly increased after demineralization. The L* values of A spots recovered significantly after treatment by resin infiltration (P<0.05), but only groups 1 and 2 reached the baseline. The L* values of B spots had no significant differences (P > 0.05) after fluoride treatment compared with that after demineralization. After resin infiltration on B spots, the L* values recovered but could not reach the baseline nor the level of A spots treated by resin infiltration only. CONCLUSION: Resin infiltration is a more effective treatment for masking white spot lesions than traditional fluoride treatment. The effect of masking white spot lesions has certain relationships with the degree of demineralization and activity of the lesion.

[Root resection by Er:YAG laser: a scanning electron microscope study].

OBJECTIVE: To compare the difference of the surface of root resection by Er:YAG laser, ultrasonic or high-speed handpiece with scanning electron microscope (SEM), and to evaluate the possibility of using Er:YAG laser on the root resection in clinical application. METHODS: Thirty maxillary central incisors were divided into three groups (Er:YAG laser group, ultrasonic group, high-speed handpiece group), and the root resection were made at root tip 3 mm with Er:YAG laser, ultrasonic instrument or long needle diamond bur according to grouping. The surface of the root resection by SEM in the aspects of debris, smear layer, opened dentinal tubules, cracks and ablation characteristics were compared. RESULTS: The examination revealed that Er:YAG laser group and ultrasonic group had no or little debris and smear layer and with opened dentinal tubules. High-speed handpiece group had great amount of debris and smear layer and without opened dentinal tubules. Cracks were observed in ultrasonic group and high-speed handpiece group, no in Er:YAG laser group. There were ablation characteristics in ultrasonic group and high-speed handpiece group, but no in Er:YAG laser group. CONCLUSION: From the morphological aspect, Er:YAG laser has much more advantage than ultrasonic instrument and diamond bur for the root resection.