Photoisomerization-controlled wavelength-tunable plasmonic lasers.

We demonstrate photoisomerization-controlled wavelength-tunable plasmonic lasers by integrating spiropyran derivative-doped PMMA films with two-dimensional Ag nanoparticle arrays. The controllable transformation between spiropyran derivatives and its isomers with different refractive indices by photoexcitation allows for a dynamical and continuous change of the refractive index in the host PMMA film, which is able to tune the lattice plasmon resonance, and hence the lasing wavelength. This result opens up a new avenue for engineering wavelength tunable plasmonic lasers toward practical photonic integration.

Evolutionary trends in human mandibles and dentition from Neolithic to current Chinese.

OBJECTIVES: This study aimed to systematically compare Neolithic mandibles and dentition with modern Chinese, and thereby discern human evolutionary trends. MATERIALS AND METHODS: Neolithic remains of 45 adults unearthed at the Zhangqiu Jiaojia site, were compared with clinical records of 48 patients at Shandong University. All samples were scanned by cone beam computed tomography (CBCT) using identical parameters. Digital imaging and communications in medicine images were collected, three-dimensional models reconstructed, and morphology measurements obtained using Mimics software. RESULTS: Neolithic mandibles were significantly larger in their vertical and sagittal dimensions (P < .05), but similar in horizontal width to modern humans. Their condyles had fewer bird beak and crooked finger shaped morphologies than modern mandibles (P < .05). Neolithic third molars were more often erupted than in modern mandibles, and their Position A, class I and II, and vertical impactions were more common (P < .05). Neolithic teeth were generally smaller in crown lengths and in cross-sectional areas, than their modern counterparts (P < .05). CONCLUSIONS: Neolithic mandibles were larger than modern humans, who have refined diets and mandibular atrophy. They had fewer abnormally shaped condylar morphologies, and much fewer third molar impactions than in modern humans. However, modern dentition particularly their crowns are larger, likely through genetic influx from migrations.

Randomly Induced Phase Transformation in Silk Protein-Based Microlaser Arrays for Anticounterfeiting.

Anticounterfeiting labels based on physical unclonable functions (PUFs) exhibit high security with unreplicable code outputs, making them an ideal platform to realize unbreakable anticounterfeiting. Although various schemes are proposed for PUF labels, the utilization of natural randomness suffers from unpredictable signal extraction sites, which poses a challenge to efficient and convenient authentication for practical anticounterfeiting applications. Here, a covert optical PUF-based cryptographic protocol from silk protein-based microlaser (SML) arrays that possess hidden randomness of lasers for unclonable lasing signals as well as a defined location for efficient identification is proposed. The initial SMLs are patterned by casting laser dye-doped regenerated silk fibroin solution, resulting in a uniform microlaser array with regulated positions. With the SML array as substrate, random methanol microdroplets are stochastically sprayed on the SML array, which eventually induces uneven lasing signal changes of the patterned microlasers. The treated SML array possesses the deterministic readout sites of laser signals and unrepeatable signal distribution characteristics, which can guarantee efficient authentication and high security when serving as an anticounterfeiting label.

Mandibular molar C-shaped root canals in 5th millennium BC China.

OBJECTIVE: The aim of this study was to analyze the occurrence and variations in C-shaped canals in ancient Chinese teeth and compare the differences of these features between ancient and age-matched modern populations. DESIGN: Approximately 5000-year-old craniofacial bone remains were collected from the fossils of 38 individuals (total: 68 mandibular second molars) excavated from the Jiaojia site. The control group comprised of an equal number of randomly selected modern samples. We used cone-beam computed tomography to scan the mandible along the apex-crown axis and analyzed the canal morphology, based on Fan's categorization criterion, at 2 mm, 5 mm, and 8 mm to the apical level. Grooves on the lingual and buccal sides were also recorded. RESULTS: The proportion of C-shaped roots among ancient samples on the left and right sides were 48.57 % (17/35 teeth) and 54.55 % (18/33 teeth), respectively, and 51.47 % (35/68 teeth) in the total sample. Conversely, in the control group, 44.12 % (15/34) and 38.24 % (13/34) occurred on the left and right sides, respectively, and 41.18 % (28/68) in the total sample. Among the C-shaped canals from the Jiaojia site samples, the classification type changed between two adjacent levels in 84.31 % of samples. Approximately 35 (51.5 %) teeth had a fused root, 20 (29.41 %) had one shallow buccal and one deep lingual groove. The occurrence of C-shape variation was not significantly correlated with time (p＞0.05). CONCLUSIONS: This study identified a high rate of C-shaped root canals among individuals of Jiaojia who lived approximately 5000 years ago.

A facile route to bulk high-Z polymer composites for gamma ray scintillation.

Two classes of bulk high-Z polymer composites were prepared, which exhibit scintillation properties for gamma-radiation detection.

[Effect of different bone cement dispersion types in the treatment of osteoporotic vertebral compression fracture].

OBJECTIVE: To observe different bone cement dispersion types of PVP, PKP and manipulative reduction PVP and their effects in the treatment of senile osteoporotic vertebral compression fractures and the bone cement leakage rate. METHODS: The clinical data of patients with osteoporotic vertebral compression fractures who underwent unilateral vertebroplasty from January 2012 to January 2015 was retrospectively analyzed. Of them, 56 cases including 22 males and 34 females aged from 60 to 78 years old were treated by PVP operation; Fouty-eight cases including 17 males and 31 females aged from 61 to 79 years old were treated by PKP operation; Forty-three cases including 15 males and 28 females aged from 60 to 76 years old were treated by manipulative reduction PVP operation. AP and lateral DR films were taken after the operation; the vertebral bone cement diffusion district area and mass district area were calculated with AutoCAD graphics processing software by AP and lateral DR picture, then ratio(K) of average diffusion area and mass area were calculated, defining K<50% as mass type, 50%<=K<=100% as mixed type and K>100% as diffusion type. Different bone cement dispersion types of PVP, PKP and manipulative reduction PVP operation were analyzed. According to bone cement dispersion types, patients were divided into diffusion type, mixed type and mass type groups.Visual analogue scale (VAS), vertebral body compression rate, JOA score and bone cement leakage rate were observed. RESULTS: All patients were followed up for 12-24 months with an average of 17.2 months. There was significant difference in bone cement dispersion type among three groups (P<0.05). The constituent ratio of diffusion type, mixed type and mass type in PVP operation was 46.43%, 35.71%, 17.86%, in PKP was 16.67%, 37.50% , 45.83%, and in manipulative reduction PVP was 37.21%, 44.19% and 18.60%, respectively. PVP operation and manipulative reduction PVP were mainly composed of diffusion type and mixed type, while PKP was mainly composed of mass type and mixed type. There was no significant difference in VAS score, JOA score and bone cement leakage rate among three groups. There was statistically significant difference in postoperative vertebral body compression rate among three bone cement dispersion types(P<0.05), postoperative vertebral body compression rate in diffusion type group at 24 h postoperatively and final follow-up was (17.31±5.06)% and(18.58±4.91)%, respectively. In mixed type group, it was(14.21±5.15)% and(14.59±5.07)%, respectively. In mass type group, it was(13.89±5.02)% and(14.28±4.94)%, respectively. CONCLUSIONS: Bone cement dispersion type is different in PVP, PKP and manipulative reduction PVP operation. The bone cement dispersion of mass type and mixed type to recovery of compressed vertebral body is better than diffusion type, and there is no obvious difference in clinical effect in different bone cement dispersion type early and middle term.

Controlled synthesis of bulk polymer nanocomposites with tunable second order nonlinear optical properties.

The transparent bulk polymer nanocomposites blended with rare earth nanoparticles are prepared through the radical polymerization of trimethylolpropane trimethylacrylate (TMPTMA). These materials produce continuously tunable second harmonic (SH) radiation under illumination of a wide spectral range of fundamental waves (750-850 nm). The SHG efficiency can be controlled well by altering the Tb(3+) doping content in the nanoparticles.

[Treatment of odontoid process fracture with pedicle screws by location through inferior and inner wall of atlas and superior and inner wall of axis].

OBJECTIVE: To evaluate the therapeutic effects of atlantoaxial pedicle screw in treating odontoid process fracture by location through inferior and inner wall of atlas and superior and inner wall of axis. METHODS: From June 2006 to September 2010, 12 patients with odontoid process fracture were treated with the atlantoaxial pedicle screw fixation by location through inferior and inner wall of atlas and superior and inner wall of axis. There were 8 males and 4 females, ranging in age from 18 to 62 years, with an average of 37.9 years. According to classification of Anderson, type II was in 10 cases and type III was in 2 cases. Fresh fracture was in 9 cases and old fracture was in 3 cases. All patients had symptoms such as cervical pain, stiffness and limitation of activity and 9 cases with symptoms were found physical signs of cervical spinal injury. According to grade of ASIA, grade C was in 4 cases and grade D was in 5 cases. RESULTS: There were no severe complications such as injuries of vertebral artery, nerve root and spinal cord during operation. The mean time of follow-up was 14 months (6 to 24 months). The X-ray film and CT scanning showed that all patients had steady bony union and all screws were in the proper position, no screws loosening or breaking were found. Clinical symptoms of all patients improved significantly. Nine patients with spinal injury before operation, of which nerve function obtained improvement, grade C was in 1 case, grade D was in 2 cases and grade E was in 6 cases according to grade of ASIA. CONCLUSION: Location through inferior and inner wall of atlas and superior and inner wall of axis is an effective method for the atlantoaxial pedicle screw implantation; atlantoaxial pedicle screw could be accurately and safely implanted thought this way.

Fluorescence resonance energy transfer in conjugated polymer composites for radiation detection.

Fluorescence resonance energy transfer in conjugated polymer composite materials was exploited for the detection of gamma ray dosage with high sensitivity and response linearity.

[Effect of concomitant substances and addition order on the adsorption of Tween 80 on sand].

Adsorption of Tween 80 on sand was investigated, and the effect of inorganic salts (CaCl2), anionic surfactant (SDS) and lignosulphonates (sodium lignosulphonate or ammonium lignosulphonate) on the adsorption of Tween 80 on sand were evaluated at 25 degrees C. The results show that saturated adsorption amount of Tween 80 on sand enhance when CaCl2 or SDS is added into flushing solution of Tween 80. And the adsorption of Tween 80 on sand increase with the increase of molar fraction of CaCl2 or SDS in mixed flushing solution. And adsorption amount of Tween 80 on sand also enhance when SDS is added into sand firstly. The effects of mixing ratios and addition order of lignosulphonates on adsorption of Tween 80 were considered. The results show that with the increase of molar fraction of lignosulphonates in mixing flushing solution, adsorption amount of Tween 80 on sand decrease. The adsorption amount of Tween 80 reduce 20%-75% due to the exist of ammonium lignosulphonate is superior to sodium lignosulphonate (10%-60%) when mix the lignosulphonates-Tween 80 at the total mass ratios of 1:10, while the adsorption amount of Tween 80 reduce 70%-90% at the total mass ratios of 1:2. Lignosulphonates added into sand firstly is more efficient than that together. Therefore,use of lignosulphonates as a preflush can reduce the adsorption of surfactants on sand and is a better method to applied in in situ flushing.

[Solubilization of nitrobenzene in micellar solutions of Tween 80 and inorganic salts].

The solubilization of nitrobenzene by a nonionic surfactant Tween 80 was investigated at 10 degrees C. Experimental results indicated that the solubility of nitrobenzene in water was greatly enhanced by Tween 80 at surfactant concentration above CMC(critical micelle concentration) and a linear relationship was obtained between surfactant concentration and nitrobenzene concentration from the solubility curve. The molar solubilization ratio (MSR) value was 5.093 and IgKm was 3.499. The solubilization was attributed to the ethoxylation group in Tween 80 micellar. Effect of four inorganic salts such as NaCl, KCl, CaCl2 , MgCl2 on water solubilities of nitrobenzene in Tween 80 micellar solutions was also investigated by a matrix of batch experiments. Mix the Tween 80-inorganic salts at the total mass ratios of 2:1, 5:1 and 10:1. The results show that the inorganic salts at a high concentration( > or = 500 mg x L(-1)) can enhance the solubilization capacities of Tween 80 micellar solution and increase the value of MSR and IgKm . Because of the salting-out effect between the micellar of Tween 80 and inorganic salts, the volume of micelle turns bigger, which may provide larger solubility volume for nitrobenzene. The mixture of nonionic surfactant and inorganic salts can be used in subsurface remediation as a flushing solution.

Fluorine distribution in aquatic environment and its health effect in the Western Region of the Songnen Plain, Northeast China.

Endemic fluorosis was investigated and studied in the west region of the Songnen plain, Northeast China in 2001-2002. The results showed that the fluorine distribution in aquatic environment was that the fluorine concentrations in the lake water and unconfined ground water were higher than that in the river water and confined ground water. The lake water (Alkali lake) is connected with unconfined ground water. In unconfined ground water, from the east and southeast areas to the west and the northwest areas of the plain, fluorine concentration fluctuated with high and low alternatively. The fluorine in the water comes from the weathering of rocks and minerals in the mountains and hills around the Songnen Plain. The main influence factors of the fluorine distribution in aquatic environment are discussed. Unconfined ground water containing high fluorine is used as drinking water. In this region, the fluorine concentration in drinking water is evidently correlated to the morbidity of dental and skeletal fluorosis. High fluorine concentration in drinking water has endangered human health.