Injectable Ovalbumin-Based Composite Implant for Photothermal Tumor Therapy.

Polymeric hydrogels with three-dimensional network structures have found tremendous applications in biomedicine. Herein, we report the synthesis of a multifunctional implant based on ovalbumin (OVA) as a carrier capable of synergistically delivering a photothermal transducing agent (polydopamine, PDA) to tumors. The formation of PDA was achieved by utilizing the basicity of OVA, whereas the formation of the hydrogel implant was achieved through the in vitro/in vivo near-infrared (NIR) laser-induced hyperthermia of PDA. The as-prepared PDA@OVA implant exhibits high photothermal conversion efficiency (38.7 %). Once implanted in vivo, the OVA-based implant shows great versatility in the treatment of malignant tumors. Furthermore, a chemotherapeutic (doxorubicin, DOX) and a contrast agent (iohexol), dispersed in the OVA solution in advance, can also be firmly entrapped in the hydrogel along with the hydrogel formation. It is anticipated that the multifunctional OVA-based implant, not showing any obvious toxicity to healthy tissue, could be a promising system for synergistic cancer treatment.

Designing a Naturally Inspired Conductive Copolymer to Engineer Wearable Bioadhesives for Sensing Applications.

The design of adhesive and conductive soft hydrogels using biopolymers with tunable mechanical properties has received significant interest in the field of wearable sensors for detecting human motions. These hydrogels are primarily fabricated through the modification of biopolymers to introduce cross-linking sites, the conjugation of adhesive components, and the incorporation of conductive materials into the hydrogel network. The development of a multifunctional copolymer that integrates adhesive and conductive properties within a single polymer chain with suitable cross-linking sites eliminates the need for biopolymer modification and the addition of extra conductive and adhesive components. In this study, we synthesized a copolymer based on poly([2-(methacryloyloxy)ethyl] trimethylammonium chloride-co-dopamine methacrylamide) (p(METAC-DMA)) using a controlled radical polymerization, allowing for the efficient conjugation of both adhesive and conductive units within a single polymer chain. Subsequently, our multifunctional hydrogel named Gel-MD was fabricated by mixing the p(METAC-DMA) copolymer with non-modified gelatin in which cross-linking took place in an oxidative environment. We confirmed the biocompatibility of the Gel-MD hydrogel through in vitro studies using NIH 3T3 cells as well as in vivo subcutaneous implantation in rats. Furthermore, the Gel-MD hydrogel was effective and sensitive in detecting various human motions, making it a promising wearable sensor for health monitoring and diagnosis.

Current insights of factors interfering the stability of lytic polysaccharide monooxygenases.

Cellulose and chitin are two of the most abundant biopolymers in nature, but they cannot be effectively utilized in industry due to their recalcitrance. This limitation was overcome by the advent of lytic polysaccharide monooxygenases (LPMOs), which promote the disruption of biopolymers through oxidative mechanism and provide a breakthrough in the action of hydrolytic enzymes. In the application of LPMOs to biomass degradation, the key to consistent and effective functioning lies in their stability. The efficient transformation of biomass resources using LPMOs depends on factors that interfere with their stability. This review discussed three aspects that affect LPMO stability: general external factors, structural factors, and factors in the enzyme-substrate reaction. It explains how these factors impact LPMO stability, discusses the resulting effects, and finally presents relevant measures and considerations, including potential resolutions. The review also provides suggestions for the application of LPMOs in polysaccharide degradation.

Customizable Dual-Fluorescent Nanoparticles for Tracing and Quantifying of Cell Transport.

Purpose: Nanotechnology-based drug delivery systems (nano-DDS) have been developed to be a promising strategy to improve the efficacy, safety, physicochemical and pharmacokinetic/pharmacodynamics properties of drugs. It is very necessary to elucidate the delivery process in vivo or in cells for the rational design and accurate preparation of nano-DDS. The aim of this study was to construct a nano-DDS to visualize and quantify the intracellular behavior of the loaded cargo and carrier in such a system. Methods: A carboxyl-terminal end of poly(lactic-co-glycolic acid) polymer was fluorescently labeled with rhodamine B by conjugation of ethylenediamine. Dual-fluorescent nanoparticles (DFPs) were prepared from this fluorescently labeled polymer to encapsulate a fluorescent cargo, coumarin 6. The carrier and cargo of DFPs were monitored by confocal fluorescence microscopy during cellular uptake. Furthermore, the transcellular transportation of DFPs was evaluated quantitatively by measuring the fluorescence intensity. Results: The obtained fluorescent polymer showed stable and quantifiable characteristics. DFPs could be customized in terms of coumarin 6 content (97.7±1.0%), size (367.3±1.7 nm) and dual-emission fluorescence (green cargo and red carrier). DFPs did not significantly affect cell viability, the integrity of cell monolayers and the microscopic morphology at concentrations below 0.7 mg/mL within 3 h of co-incubation with Caco-2 cells. Multichannel fluorescence monitoring revealed that the fluorescence intensity of the carrier and cargo increased with time, but not synchronously. By calculating the residual, intracellular, and transport amounts of DFPs, the material balance between the total amount of cellular transport and the dose administered was obtained. Conclusion: Based on the advantages of dual fluorescent labeling, the differential behavior of cell trafficking can be visualized and quantitatively analyzed for the cargo and carrier of DFPs. These results provide insights into the cellular transport process of holistic nanoparticles and complement our understanding of the biological behaviors of nano-DDS.

Photo-induced tumor therapy using MnO2/IrO2-PVP nano-enzyme with TME-responsive behaviors.

In this research, MnO2/IrO2 nanoplatform was one-step synthesized from the heat-induced oxidation-reduction between potassium permanganate and iridium chloride and modified with polyvinylpyrrolidone (PVP) on the surface to obtain MnO2/IrO2-PVP nanoparticles (MIP NPs) with excellent colloidal stability of biocompatibility. Then, the photosensitizer Chlorin e6 (Ce6) was loaded onto the surface of MIP NPs. The IrO2 can efficiently transform the 808 nm near-infrared laser into heat with a photothermal conversion of 27.57 % for tumor photothermal therapy. Interestingly, the MnO2 can not only react with the redundant H+ and realize the magnetic resonance imaging of the tumor but also catalytic the decomposition of H2O2 in the tumor to generate O2 and relieve the hypoxia status of the tumor. The in-situ formed O2 can promote the production of cancer cell-toxic singlet oxygens (1O2) under the irradiation of 660 nm laser and boost the tumor photodynamic therapy efficiency. Moreover, it was found that PVP can fall off from the MIP NPs to increase their accumulation in the tumor. Such a MIP/Ce6-based nanoplatform which plays the synergism with tumor microenvironment shows promising potential for the combined photo-therapy of the tumor.

Protraction of mandibular molars through a severely atrophic edentulous space in a case of juvenile periodontitis.

Moving the mandibular posterior teeth into a severely atrophic edentulous space is a challenge. A carefully designed force-and-moment system that results in bodily protraction of the posterior teeth with balanced bone resorption and apposition is needed in such cases. This report describes the treatment of a 19-year-old woman with missing mandibular first molars due to juvenile periodontitis. Miniscrews were used as absolute anchorage during protraction of the mandibular second and third molars. Bodily mesial movement of the mandibular second and third molars was achieved over a distance of 11 to 17 mm after 39 months of orthodontic treatment.

Laser-induced graphitization of polydopamine leads to enhanced mechanical performance while preserving multifunctionality.

Polydopamine (PDA) is a simple and versatile conformal coating material that has been proposed for a variety of uses; however in practice its performance is often hindered by poor mechanical properties and high roughness. Here, we show that blue-diode laser annealing dramatically improves mechanical performance and reduces roughness of PDA coatings. Laser-annealed PDA (LAPDA) was shown to be >100-fold more scratch resistant than pristine PDA and even better than hard inorganic substrates, which we attribute to partial graphitization and covalent coupling between PDA subunits during annealing. Moreover, laser annealing provides these benefits while preserving other attractive properties of PDA, as demonstrated by the superior biofouling resistance of antifouling polymer-grafted LAPDA compared to PDA modified with the same polymer. Our work suggests that laser annealing may allow the use of PDA in mechanically demanding applications previously considered inaccessible, without sacrificing the functional versatility that is so characteristic of PDA.

Preparation of injectable temperature-sensitive chitosan-based hydrogel for combined hyperthermia and chemotherapy of colon cancer.

The purpose of this study was to design an injectable hydrogel with temperature-sensitive property for safe and high efficient in vivo colon cancer hyperthermia and chemotherapy. Chitosan (CS) solution was injected into the tumor at room temperature and automatically gelled after warming to body temperature in the present of ß-glycerophosphate (ß-GP). Combined localized tumor photothermal and chemotherapy were achieved by dissolving photothermal material MoS2/Bi2S3-PEG (MBP) nanosheets and drug molecule doxorubicin (DOX) into the hydrogel, and the gel system could encapsulate DOX and MBP nanosheets and prevent them from entering the blood circulation and damaging normal tissues and cells. More importantly, the CS/MBP/DOX (CMD) hydrogel exhibited a photothermal efficiency of 22.18% and 31.42% in the first and second near infrared light (NIR I and NIR II) biowindows respectively at a low MBP concentration (0.5 mg/mL). Besides, the release of the DOX from CMD hydrogel was controllable since the gel temperature could be governed by NIR laser irradiation. Moreover, the chitosan-based hydrogel had antibacterial effects. The designed composite hydrogel is anticipated to act as a platform for the high efficient treatment of tumors owing to the different penetration depths of NIR I and NIR II.

One-pot synthesis of polypyrrole nanoparticles with tunable photothermal conversion and drug loading capacity.

With an excellent near-infrared (NIR) light-responsive property, polypyrrole (PPy) nanoparticle has emerged as a promising NIR photothermal transducing agent for tumor photothermal therapy (PTT). Herein, we reported the PVP mediated one-pot synthesis of colloidal stable and biocompatible PPy nanoparticles (PPy-PVP NPs) for combined tumor photothermal-chemotherapy. The influence of molecular weight and PVP concentration on the spectroscopic characteristic, photothermal feature, drug loading performance, and antitumor efficiency of the resultant PPy-PVP NPs was systematically studied. By choosing PVP with a molecular weight of 360 kDa (concentration of 5 mg/mL) as the template and surface modifier during the synthesis, PPy-PVP NPs with optimal spectroscopic characteristic, photothermal feature, drug loading performance, and antitumor efficiency were synthesized. Findings in this study are anticipated to provide an in-depth understanding of the important character of surface engineering in the rational design and biomedical applications of PPy NPs.

Preparation of Poly(lactic-co-glycolic acid)-Based Composite Microfibers for Postoperative Treatment of Tumor in NIR I and NIR II Biowindows.

In this work, a novel kind of electrospun microfiber to deliver a photothermal agent and an anticancer drug to tumor sites is explored. Photothermal therapy agent (MoS2 nanosheets) and doxorubicin (DOX) are incorporated with poly(lactic-co-glycolic acid) (PLGA) microfiber via electrospinning a solution of PLGA, MoS2 , and DOX. The designed microfiber with uniform fibrous morphology and negligible in vitro/in vivo hemo-/histo-toxicity is used as a durable photothermal agent, which shows an excellent photothermal transform ability and acceptable photothermal stability in both the first and second near-infrared light (NIR I and II) biowindows. The synergistic in vivo tumor chemotherapy and photothermal therapy efficiency of the composite microfibers are studied in postoperative treatment of cancer. It is found that the tumor postoperative reoccurrence can be completely prohibited owing to the synergistic tumor therapy efficiency in both the NIR I and NIR II biowindows.

Design of injectable agar-based composite hydrogel for multi-mode tumor therapy.

We designed an injectable hydrogel by dissolving MoS2/Bi2S3-PEG (MBP), doxorubicin (DOX) and agar into water for the concurrent tumor photothermal and chemotherapy. The formed solution was able to be intra-tumorally (I.T.) administered into tumor at a relatively high temperature and automatically formed a hydrogel after cooling to body temperature. The resultant Agar/MBP/DOX (AMD) hydrogel can act as a macro-vessel to retain the MBP nanosheet and DOX and restrict their access to body fluid circulation. Moreover, AMD hydrogel did not compromise the photoacoustic and computed tomography imaging capacity, as well as the photothermal and chemotherapy efficiency of MBP nanosheets and DOX. The heat from the photothermal transformation of MBP nanosheet can promote the drug-release from the hydrogel and thus enable an on-demand drug release. Furthermore, antibiotics were also able to be encapsulated in the hydrogel to avoid the potential wound infection during tumor surgery.

Dental Stem Cell in Tooth Development and Advances of Adult Dental Stem Cell in Regenerative Therapies.

Stem cell-based therapies are considered as a promising treatment for many clinical usage such as tooth regeneration, bone repairation, spinal cord injury, and so on. However, the ideal stem cell for stem cell-based therapy still remains to be elucidated. In the past decades, several types of stem cells have been isolated from teeth, including dental pulp stem cells (DPSCs), stem cells from human exfoliated deciduous teeth (SHED), periodontal ligament stem cells (PDLSCs), dental follicle progenitor stem cells (DFPCs) and stem cells from apical papilla (SCAP), which may be a good source for stem cell-based therapy in certain disease, especially when they origin from neural crest is considered. In this review, the specific characteristics and advantages of the adult dental stem cell population will be summarized and the molecular mechanisms of the differentiation of dental stem cell during tooth development will be also discussed.