Fast 3D chemical exchange saturation transfer (CEST) imaging of the human brain.

Chemical exchange saturation transfer magnetic resonance imaging can detect low-concentration compounds with exchangeable protons through saturation transfer to water. This technique is generally slow, as it requires acquisition of saturation images at multiple frequencies. In addition, multislice imaging is complicated by saturation effects differing from slice to slice because of relaxation losses. In this study, a fast three-dimensional chemical exchange saturation transfer imaging sequence is presented that allows whole-brain coverage for a frequency-dependent saturation spectrum (z-spectrum, 26 frequencies) in less than 10 min. The approach employs a three-dimensional gradient- and spin-echo readout using a prototype 32-channel phased-array coil, combined with two-dimensional sensitivity encoding accelerations. Results from a homogenous protein-containing phantom at 3T show that the sequence produced a uniform contrast across all slices. To show translational feasibility, scans were also performed on five healthy human subjects. Results for chemical exchange saturation transfer images at 3.5 ppm downfield of the water resonance, so-called amide proton transfer images, show that lipid signals are sufficiently suppressed and artifacts caused by B(0) inhomogeneity can be removed in postprocessing. The scan time and image quality of these in vivo results show that three-dimensional chemical exchange saturation transfer MRI using gradient- and spin-echo acquisition is feasible for whole-brain chemical exchange saturation transfer studies at 3T in a clinical time frame.

Solution-Processed Sensing Textiles with Adjustable Sensitivity and Linear Detection Range Enabled by Twisting Structure.

Wearable strain sensors are emerging rapidly for their promising applications in human motion detection for diagnosis, healthcare, training instruction, and rehabilitation exercise assessment. However, it remains a bottleneck in gaining comfortable and breathable devices with the features of high sensitivity, linear response, and tunable detection range. Textiles possess fascinating advantages of good breathability, aesthetic property, tailorability, and excellent mechanical compliance to conformably attach to human body. As the meandering loops in a textile can be extended in different directions, it provides plenty of room for exploring ideal sensors by tuning a twisting structure with rationally selected yarn materials. Herein, textile sensors with twisting architecture are designed via a solution-based process by using a stable water-based conductive ink that is composed of polypyrrole/polyvinyl alcohol nanoparticles with a mean diameter of 50 nm. Depending on the predesigned twisting models, the thus-fabricated textile sensors show adjustable performances, exhibiting a high sensitivity of 38.9 with good linearity and a broad detection range of 200%. Such sensors can be integrated into fabrics and conformably attached to skin for monitoring subtle (facial expressions, breathing, and speaking) and large (stretching, jumping, running and jogging, and sign language) human motions. As a proof-of-concept application, by integrating with a wireless transmitter, the signals detected by our sensors during exercise (e.g., running) can be remotely received and displayed on a smartphone. It is believed that the integration of our textile sensors with selected twisting models into a cloth promises full-range motion detection for wearable electronics and human-machine interfaces.

Size-induced enhancement of chemical exchange saturation transfer (CEST) contrast in liposomes.

Liposome-based chemical exchange saturation transfer (lipoCEST) agents have shown great sensitivity and potential for molecular magnetic resonance imaging (MRI). Here we demonstrate that the size of liposomes can be exploited to enhance the lipoCEST contrast. A concise analytical model is developed to describe the contrast dependence on size for an ensemble of liposomes. The model attributes the increased lipoCEST contrast in smaller liposomes to their larger surface-to-volume ratio, causing an increased membrane water exchange rate. Experimentally measured rates correlate with size, in agreement with the model. The water permeability of liposomal membrane is found to be 1.11 +/- 0.14 microm/s for the specific lipid composition at 22 degrees C. Availability of the model allows rational design of the size of liposomes and quantification of their properties. These new theoretical and experimental tools are expected to benefit applications of liposomes to sensing the cellular environment, targeting and imaging biological processes, and optimizing drug delivery properties.

Ultraflexible Transparent Film Heater Made of Ag Nanowire/PVA Composite for Rapid-Response Thermotherapy Pads.

Ultraflexible transparent film heaters have been fabricated by embedding conductive silver (Ag) nanowires into a thin poly(vinyl alcohol) film (AgNW/PVA). A cold-pressing method was used to rationally adjust the sheet resistance of the composite films and thus the heating powers of the AgNW/PVA film heaters at certain biases. The film heaters have a favorable optical transmittance (93.1% at 26 Ω/sq) and an outstanding mechanical flexibility (no visible change in sheet resistance after 10 000 bending cycles and at a radius of curvature ≤1 mm). The film heaters have an environmental endurance, and there is no significant performance degradation after being kept at high temperature (80 °C) and high humidity (45 °C, 80% humidity) for half a year. The efficient Joule heating can increase the temperature of the film heaters (20 Ω/sq) to 74 °C in ∼20 s at a bias of 5 V. The fast-heating characteristics at low voltages (a few volts) associated with its transparent and flexibility properties make the poly(dimethylsiloxane)/AgNW/PVA composite film a potential candidate in medical thermotherapy pads.