Cobalt doped Prussian blue modified hollow polydopamine for enhanced antibacterial therapy.

Give the emergence of drug resistance in bacteria resulting from antibiotic misuse, there is an urgent need for research and application of novel antibacterial approaches. In recent years, nanoparticles (NPs) have garnered significant attention due to their potential to disrupt bacteria cellular structure through loading drugs and special mechanisms, thus rendering them inactive. In this study, the surface of hollow polydopamine (HPDA) NPs was utilized for the growth of Prussian blue (PB), resulting in the formation of HPDA-PB NPs. Incorporation of Co element during the preparation process led to partial doping of PB with Co2+ions. The performance test results demonstrated that the HPDA-PB NPs exhibited superior photothermal conversion efficiency and peroxidase-like activity compared to PB NPs. HPDA-PB NPs have the ability to catalyze the formation of hydroxyl radicals from H2O2in a weakly acidic environment. Due to the tiny PB particles on the surface and the presence of Co2+doping, they have strong broad-spectrum antibacterial properties. Bothin vitroandin vivoevaluations confirm their efficacy against various bacterial strains, particularlyStaphylococcus aureus, and their potential to promote wound healing, making them a promising candidate for advanced wound care and antimicrobial applications.

A Study on the Growth and Physiological Toxicity Effects of the Combined Exposure of Microplastics and Cadmium on the Vicia faba L. Seedlings.

To investigate the toxicological effects of polystyrene microplastics (PS-MPs), cadmium (Cd), and their combined contamination on the growth and physiological responses of V. faba seedlings, this experiment employed a hydroponic method. The Hoagland nutrient solution served as the control, changes in root growth, physiological and biochemical indicators of V. faba seedlings under different concentrations of PS-MPs (10, 100 mg/L) alone and combined with 0.5 mg/L Cd. The results demonstrated that the root biomass, root vitality, generation rate of superoxide radicals (O2·-), malondialdehyde (MDA) content, and superoxide dismutase (SOD) activity increased with increasing concentration under the influence of PS-MPs alone, while the soluble sugar content and peroxidase (POD) activity decreased. In the combined treatment with Cd, the trends of these indicators are generally similar to the PS-MPs alone treatment group. However, root vitality and SOD activity showed an inverse relationship with the concentration of PS-MPs. Furthermore, laser confocal and electron microscopy scanning revealed that the green fluorescent polystyrene microspheres entered the root tips of the V. faba and underwent agglomeration in the treatment group with a low concentration of PS-MPs alone and a high concentration of composite PS-MPs with Cd.

Tough and Thermostable Polybutylene Terephthalate (PBT)/Vitrimer Blend with Enhanced Interfacial Compatibility.

Polymer blending is an efficient way to obtain extraordinary polymeric materials. However, once permanently cross-linked thermosets are involved in blending, there are challenges in designing and optimizing the structures and interfacial compatibility of blends. Vitrimer with dynamic covalent polymer networks provides an innovative opportunity for blending thermoplastics and thermosets. Herein, a reactive blending strategy is proposed to develop thermoplastic-thermoset blend with enhanced compatibility on the basis of dynamic covalent chemistry. Specifically, polybutylene terephthalate (PBT) and polymerized epoxy vitrimer can be directly melt blended to obtain tough and thermostable blends with desirable microstructures and interfacial interaction. Bond exchange facilitates the grafting of PBT and epoxy vitrimer chains, thus enhancing the interfacial compatibility and thermal stability of blends. The obtained blend balances the strength and stretchability of PBT and epoxy vitrimer, resulting in enhanced toughness. This work offers a new way of designing and fabricating new polymeric materials by blending thermoplastics and thermosets. It also suggests a facile direction towards upcycling thermoplastics and thermosets.

Polydopamine-coated UiO-66 nanoparticles loaded with perfluorotributylamine/tirapazamine for hypoxia-activated osteosarcoma therapy.

BACKGROUND: Hypoxia is a characteristic of solid tumors that can lead to tumor angiogenesis and early metastasis, and addressing hypoxia presents tremendous challenges. In this work, a nanomedicine based on oxygen-absorbing perfluorotributylamine (PFA) and the bioreductive prodrug tirapazamine (TPZ) was prepared by using a polydopamine (PDA)-coated UiO-66 metal organic framework (MOF) as the drug carrier. RESULTS: The results showed that TPZ/PFA@UiO-66@PDA nanoparticles significantly enhanced hypoxia, induced cell apoptosis in vitro through the oxygen-dependent HIF-1α pathway and decreased oxygen levels in vivo after intratumoral injection. In addition, our study demonstrated that TPZ/PFA@UiO-66@PDA nanoparticles can accumulate in the tumor region after tail vein injection and effectively inhibit tumor growth when combined with photothermal therapy (PTT). TPZ/PFA@UiO-66@PDA nanoparticles increased HIF-1α expression while did not promote the expression of CD31 in vivo during the experiment. CONCLUSIONS: By using TPZ and PFA and the enhanced permeability and retention effect of nanoparticles, TPZ/PFA@UiO-66@PDA can target tumor tissues, enhance hypoxia in the tumor microenvironment, and activate TPZ. Combined with PTT, the growth of osteosarcoma xenografts can be effectively inhibited.

A novel COL2A1 mutation causing spondyloepiphyseal dysplasia congenita in a Chinese family.

BACKGROUND: Spondyloepiphyseal dysplasia congenita is an autosomal dominant cartilaginous dysplasia characterized by short trunk, abnormal epiphysis, and flattened vertebral body. Skeletal features of SEDC are present at birth and evolve over time. Other features of SEDC include myopia and/or retinal degeneration with retinal detachment and cleft palate. A mutation in the COL2A1 gene located in 12q13.11 is considered as one of the important causes of SEDC. In 2016, Barat-Houari et al. reported a large number of COL2A1 mutations. Among them, a non-synonymous mutation in COL2A1 exon 37, c.2437G>A (p. Gly813Arg), has been reported to cause SEDC in only one patient from France so far. METHODS: We followed up a patient with SEDC phenotype and his family members. The clinical manifestations, physical examination and imaging examination, including X-ray, CT and MRI, were recorded. The whole-exome sequencing was used to detect the patients' genes, and the pathogenic genes were screened out by comparing with many databases. RESULTS: We report a Chinese patient with SEDC phenotype characterized by short trunk, abnormal epiphysis, flattened vertebral body, narrow intervertebral space, dysplasia of the odontoid process, chicken chest, scoliosis, hip and knee dysplasia, and joint hypertrophy. Gene sequencing analysis showed that the patient had a heterozygous mutation (c.2437G>A; p. Gly813Arg) in the COL2A1 gene. No COL2A1 mutation or SEDC phenotype was observed in his family members. This is the first report of SEDC caused by this mutation in an East Asian family. CONCLUSION: This report provides typical clinical, imaging, and genetic evidence for SEDC, confirming that a de novo mutation in the COL2A1 gene, c.2437G>A (p. Gly813Arg), causes SEDC in Chinese population.

Comparison of fundus changes following silicone oil and sterilized air tamponade for macular-on retinal detachment patients.

BACKGROUND: To investigate different tamponade effects of intravitreal silicone oil (SO) and sterilized air on macular vasculature and structure after successful retinal repair for macular-on rhegmatogenous retinal detachment (RRD) patients. METHOD: 21 eyes (21 patients) with macular-on RRD underwent single pars plana vitrectomy following intravitreal SO or sterilized air (Gas) tamponade. Optical Coherence Tomography (OCT) and angiography were used to evaluate retinal layer thickness and flow density (FD) changes throughout the observation period of 12 weeks. Retinal layers were segmented into 7 sets: NFL, GCL + IPL, INL, OPL, ONL + IS, OS+RPE and BRM. Macular perfusion system was segmented into superficial and deep capillary plexus flow density (SCPFD, DCPFD), and choriocapillaries plexus flow density (CCPFD). RESULT: Compared to Gas tamponade, SO tamponade led to more decrease in both superficial and deep retinal blood flow during observation. NFL thickness was found to decrease in both Gas tamponade and SO tamponade eyes. SO tamponade resulted in more pronounced decrease which led to significant intergroup difference. Opposite changing trends were found in GCL + IPL and ONL + IS thicknesses due to different means of tamponade. SO tamponade caused thicknesses of these two segmented layers to decrease, which led to significant intergroup differences. SO tamponade also led to more decrease in INL, OPL thicknesses. No significant intergroup difference of choroidal thickness was observed. CONCLUSION: Compared to gas, silicone oil could have more negative tamponade effects on both fundus vasculature and structure.

Prevotella intermedia boosts OSCC progression through ISG15 upregulation: a new target for intervention.

PURPOSE: Periodontitis-associated bacteria, such as Porphyromonas gingivalis and Fusobacterium nucleatum, are closely linked to the risk of oral squamous cell carcinoma (OSCC). Emerging studies have indicated that another common periodontal pathogen, Prevotella intermedia (P. intermedia), is enriched in OSCC and could affect the occurrence and progression of OSCC. Our aim is to determine the effects of P. intermedia on the progression of OSCC and the role of antibiotics in reversing these effects. METHODS: In this study, a murine xenograft model of OSCC was established, and the mice were injected intratumorally with PBS (control group), P. intermedia (P.i group), or P. intermedia combined with an antibiotic cocktail administration (P.i + ABX group), respectively. The effects of P. intermedia and ABX administration on xenograft tumor growth, invasion, angiogenesis, and metastasis were investigated by tumor volume measurement and histopathological examination. Enzyme-linked immunosorbent assay (ELISA) was used to investigate the changes in serum cytokine levels. Immunohistochemistry (IHC) was adopted to analyze the alterations in the levels of inflammatory cytokines and infiltrated immune cells in OSCC tissues of xenograft tumors. Transcriptome sequencing and analysis were conducted to determine differential expression genes among various groups. RESULTS: Compared with the control treatment, P. intermedia treatment significantly promoted tumor growth, invasion, angiogenesis, and metastasis, markedly affected the levels of inflammatory cytokines, and markedly altered M2 macrophages and regulatory T cells (Tregs) infiltration in the tumor microenvironment. However, ABX administration clearly abolished these effects of P. intermedia. Transcriptome and immunohistochemical analyses revealed that P. intermedia infection increased the expression of interferon-stimulated gene 15 (ISG15). Correlation analysis indicated that the expression level of ISG15 was positively correlated with the Ki67 expression level, microvessel density, serum concentrations and tissue expression levels of inflammatory cytokines, and quantities of infiltrated M2 macrophages and Tregs. However, it is negatively correlated with the quantities of infiltrated CD4+ and CD8+ T cells. CONCLUSION: In conclusion, intratumoral P. intermedia infection aggravated OSCC progression, which may be achieved through upregulation of ISG15. This study sheds new light on the possible pathogenic mechanism of intratumoral P. intermedia in OSCC progression, which could be a prospective target for OSCC prevention and treatment.

A digital orthodontic arch wire design system with interactive adjustment and intelligent optimization.

The design of orthodontic arch wires is a prerequisite for orthodontic treatment that determines the subsequent orthodontic effects. Current methods for designing orthodontic arch wires are often based on traditional manual techniques, which suffer from problems such as low accuracy and efficiency. To address these issues, a digital orthodontic arch wire design system has been developed using Unity 3D and C#. This system allows for the interactive adjustment and intelligent optimization of the shape of digital orthodontic arch wires. The developed system includes modules for curve design, contour construction, and collision detection of orthodontic arch wires, which can be customized interactively to meet the personalized needs of patients. In addition, an energy-constrained method is employed to optimize the shape of certain regions of the arch wire, which helps overcome distortion and interference issues caused by unreasonable interaction. The effectiveness of the developed system has been evaluated through experiments on digital design and optimization of orthodontic arch wires. Results demonstrate that the system can achieve accurate and efficient digital design of orthodontic arch wires, effectively reduce distortion, and is expected to improve the orthodontic effect.

Fully bio-based and intrinsically flame retardant unsaturated polyester cross-linked with isosorbide-based diluents.

Unsaturated polyester resins (UPR) are composed of prepolymers and styrene diluents, while the former are produced by co-polycondensation between diol, unsaturated diacid and saturated diacid. In this work, bio-based UPR prepolymers were synthesized from bio-based oxalic acid, itaconic acid, and ethylene glycol, which were then diluted with bio-based isosorbide methacrylate (MI). Meanwhile, the phenylphosphonate were introduced into the molecular chains of prepolymers to achieve intrinsic flame retardancy of bio-based UPR. The potential of the reactive MI diluents as substitutes of volatile styrene, was also assessed through the volatility test, curing kinetics and gel contents analysis. For UPR materials with styrene diluents, the UPR materials can achieve UL-94 V0 level and the 28% of limiting oxygen index (LOI) with 2.63 wt% of phosphorus contents. By contrast, the UPR materials with MI diluents can reach UL-94 V0 level with only 2.14 wt% of phosphorus contents. As the phosphorus contents were further increased to 2.63 wt%, UPR materials can achieve highest 29%, while the peak of heat release rate (PHRR) and total heat release (THR) were decreased by 68.01% and 48.62%, respectively. The Flame Retardancy Index (FRI) was also used to comprehensively evaluate the flame retardant performance of UPR composites. Compared with neat UPR, the composites with MI diluents and phosphorus containing structures increased from 1.00 to 6.46. The mechanism for improved flame retardancy was analyzed from gaseous and condensed phase. Additionally, the tensile strengths of bio-based UPR materials with styrene and MI diluents were studied. This work provides an effective method to prepared high-performance and fully bio-based UPR materials with improved flame retardant properties and safety application of reactive diluents.

High-performance flexible polyurethane foam based on hierarchical BN@MOF-LDH@APTES structure: Enhanced adsorption, mechanical and fire safety properties.

Improving resilience, enhancing fire safety and adsorption properties were the key points for the preparation of high-performance flexible polyurethane foam (FPUF). Here, MOF-derived petal-like Co/Mg-double metal hydroxide (Co/Mg-LDH) and 3-aminopropyltriethoxysilane (APTES) were selected to modify the hydroxylated boron nitride (BNNS-OH) to obtain a hydrophobic BN@MOF-LDH@APTES. Compared with the previous work, BN@MOF-LDH@APTES demonstrated extremely high filler efficiency in reducing the heat release per unit mass (THR/TM) (18.2 % reduction) and smoke production per unit mass (TSP/TM) (19.1% reduction) of FUPF during combustion. In addition, the obtained FPUF nanocomposite exhibited high absorption capacity while achieving remarkable thermal stability and fire safety. Moreover, the FPUF nanocomposite containing 1 wt% BN@MOF-LDH@APTES achieved a 71% increase in compressive strength, indicating excellent resilience. Therefore, this work provided a new material for the preparation of high-resilience FPUF with both flame retardancy and adsorption capacity.

Covalent grafting diazotized black phosphorus with ferrocene oligomer towards smoke suppression and toxicity reduction.

In comparison with the thermal hazard of polymers, noxious smoke and gas produced by the combustion of polymers make the environment self-purification a huge challenge. As a new type of a highly effective flame retardant, black phosphorus (BP) can effectively decrease the thermal hazard of polymers, but its performances in smoke suppression and toxicity reduction are unsatisfactory. In this article, a method of covalently grafting diazotized BP with a ferrocene oligomer was applied to promote the smoke suppression and toxicity reduction efficiency of BP. In our work, the BP-NH nanomaterials with a mass of amino groups on the surface were acquired by diazotizing the BP. Then, the BP-Fe was obtained by covalently grafting the ferrocene chloride salt and nitrogen-containing heterocycles on the surface of BP. The smoke production rate (SPR) and total smoke production (TSP) values of the epoxy resin (EP) decreased by 49.8% and 52.5% with the addition of 2 wt% BP-Fe, respectively. In comparison with previous studies, this work was far more effective than the previous work in smoke suppression and flame retardant. The release of toxic gases (CO and HCN) and volatile organic compounds in the EP was also effectively inhibited at the same time. In addition, the storage modulus and tensile strength of nanocomposites increased by 35.1% and 27.2% with the addition of 1 wt% BP-Fe. This work also provides a new idea on how to simultaneously strengthen the toxic smoke suppression, mechanical properties, and flame retardant of polymer materials.

Exploration on structural rules of highly efficient flame retardant unsaturated polyester resins.

Owing to the lack of research on structure-activity relationship and interaction mechanism between unsaturated polyester resins (UPR) and flame retardants, it has been a big challenge to prepare high-efficiency flame retardants for UPR in industry. In this research, to explore structural rules of high-efficiency flame retardants, several polymeric flame retardants were synthesized with varied main-chain, side-chain, phosphorus valence states and contents of flame retardant elements. The thermal stabilities of flame retardants and UPR composites were firstly assessed. It has been found the interaction existed between flame retardants and UPR, through transesterification reaction and ß scission pathway in polyester and polystyrene chains. With only 15 wt% of PCH3-S, UPR composites can reach V0 rating in UL-94. The PHRR and THR values can be maximumly decreased by 71.66 % and 77.67 %, with 20 wt% of PB-S. It has been found flame retardants with sulfone group and + 3 valence state of phosphorus in molecular backbone can release SO2 and phosphorus containing compounds in gaseous phase, which diluted fuel fragments and catalyzed H⋅ and HO⋅ radical removal. The mechanism for improved flame retardancy of UPR composites with various polymeric flame retardants were discussed in detail. Some general rules for highly efficient flame retardant UPR can be summarized: First, gaseous phase flame retardant mechanism plays the major role in improvement of flame retardant performance of UPR composites; Second, the combination of + 3 valence state of phosphorus structures, higher phosphorus contents and sulfone groups effectively improves the flame retardant efficiency of flame retardants.

Hindered phenolic antioxidant passivation of black phosphorus affords air stability and free radical quenching.

As an antioxidant, hindered phenol scavenges free radicals. Due to the oxidative degradation of black phosphorus (BP) in the presence of water and oxygen, free radical quenching of hindered phenol antioxidants can solve this issue and improve the environmental stability and flame retardant efficiency of BP. Herein, hydroxyl-modified BP (BP-OH) with active groups on the surface was obtained by hydroxylation, and then the hindered phenol antioxidant was grafted onto the surface of BP-OH through an isophorone diisocyanate bridging covalent reaction to obtain hindered phenol-modified BP (BP-HPL). The fire hazard of thermoplastic polyurethane (TPU) can be significantly reduced by introducing BP-HPL into TPU. Adding 2 wt% BP-HPL can reduce the heat release rate and total heat release values of TPU by 49.9% and 49.0%, respectively. In addition, the reductions in smoke volume and carbon monoxide production were also significant. Compared with BP-OH, the environmental stability of BP-HPL is significantly improved. This work provides a reference for the application of BP in the field of fire safety and simultaneously achieves the improvement of the environmental stability and flame retardant performance of BP.

Oral Bacteriome and Mycobiome across Stages of Oral Carcinogenesis.

Oral microbial dysbiosis contributes to the development of oral squamous cell carcinoma (OSCC). Numerous studies have focused on variations in the oral bacterial microbiota of patients with OSCC. However, similar studies on fungal microbiota, another integral component of the oral microbiota, are scarce. Moreover, there is an evidence gap regarding the role that microecosystems play in different niches of the oral cavity at different stages of oral carcinogenesis. Here, we catalogued the microbial communities in the human oral cavity by profiling saliva, gingival plaque, and mucosal samples at different stages of oral carcinogenesis. We analyzed the oral bacteriome and mycobiome along the health-premalignancy-carcinoma sequence. Some species, including Prevotella intermedia, Porphyromonas endodontalis, Acremonium exuviarum, and Aspergillus fumigatus, were enriched, whereas others, such as Streptococcus salivarius subsp. salivarius, Scapharca broughtonii, Mortierella echinula, and Morchella septimelata, were depleted in OSCC. These findings suggest that an array of signature species, including bacteria and fungi, are closely associated with oral carcinogenesis. OSCC-associated diversity differences, species distinction, and functional alterations were most remarkable in mucosal samples, not in gingival plaque or saliva samples, suggesting an urgent need to define oral carcinogenesis-associated microbial dysbiosis based on the spatial microbiome. IMPORTANCE Abundant oral microorganisms constitute a complex microecosystem within the oral environment of the host, which plays a critical role in the adjustment of various physiological and pathological states of the oral cavity. In this study, we demonstrated that variations in the "core microbiome" may be used to predict carcinogenesis. In addition, sample data collected from multiple oral sites along the health-premalignancy-carcinoma sequence increase our understanding of the microecosystems of different oral niches and their specific changes during oral carcinogenesis. This work provides insight into the roles of bacteria and fungi in OSCC and may contribute to the development of early diagnostic assays and novel treatments.

The effect of denture-wearing on physical activity is associated with cognitive impairment in the elderly: A cross-sectional study based on the CHARLS database.

Background: Currently, only a few studies have examined the link between dental health, cognitive impairment, and physical activity. The current study examined the relationship between denture use and physical activity in elderly patients with different cognitive abilities. Methods: The study data was sourced from the 2018 China Health and Retirement Longitudinal Study (CHARLS) database, which included information on denture use and amount of daily physical activity undertaken by older persons. Physical activity was categorized into three levels using the International Physical Activity General Questionnaire and the International Physical Activity Scale (IPAQ) rubric. The relationship between denture use and physical activity in middle-aged and older persons with varying degrees of cognitive functioning was studied using logistic regression models. Results: A total of 5,892 older people with varying cognitive abilities were included. Denture use was linked to physical activity in the cognitively healthy 60 + age group (p = 0.004). Denture use was positively related with moderate physical activity in the population (odds ratio, OR: 1.336, 95% confidence interval: 1.173-1.520, p < 0.001), according to a multivariate logistic regression analysis, a finding that was supported by the calibration curve. Furthermore, the moderate physical activity group was more likely to wear dentures than the mild physical activity group among age-adjusted cognitively unimpaired middle-aged and older persons (OR: 1.213, 95% CI: 1.053-1.397, p < 0.01). In a fully adjusted logistic regression model, moderate physical activity population had increased ORs of 1.163 (95% CI: 1.008-1.341, p < 0.05) of dentures and vigorous physical activity population had not increased ORs of 1.016 (95% CI: 0.853-1.210, p > 0.05), compared with mild physical activity population. Conclusion: This findings revealed that wearing dentures affects physical activity differently in older persons with different cognitive conditions. In cognitively unimpaired older adults, wearing dentures was associated with an active and appropriate physical activity status.

Supramolecular wrapped sandwich like SW-Si3N4 hybrid sheets as advanced filler toward reducing fire risks and enhancing thermal conductivity of thermoplastic polyurethanes.

A sandwich-like melamine/phytic acid/silicon nitride hybrid (SW-Si3N4) sheets were prepared by supramolecular wrapping as the hybrid flame retardants for thermoplastic polyurethane (TPU). The introduction of Si3N4 sheets as a template could not only induce the generation of two-dimensional phytic/melamine (PAMA) capping layers, but also produce the synergistic flame-retardant effect on TPU composites. Cone test showed that heat release rate (HRR), smoke production rate (SPR) and total smoke production (TSP) values of TPU were decreased obviously by adding SW-Si3N4. TG-IR test indicated the dramatic inhibition of aromatic compound, hydrocarbons, CO and HCN release. Besides, the thermal conductivity of composites was obviously improved by adding SW-Si3N4. This work may provide better reference for developing multi-functional TPU composites for diverse application.

Determination of freely dissolved polycyclic aromatic hydrocarbons in human serum using core-shell Fe3O4@polyacrylate magnetic microspheres by exclusive volume effect.

Freely dissolved concentration is an important parameter for evaluating the bioavailability of compounds. Negligible-depletion solid-phase microextraction (nd-SPME) has been widely used for the determination of freely dissolved compounds but suffered from long equilibrium time. Multifunctional mesoporous composite microspheres have large specific surface area and therefore extraction equilibrium could be reached in a short time. In this study, a novel method was developed for quick determination of freely dissolved polycyclic aromatic hydrocarbons (PAHs) in human serum using core-shell polyacrylate-ferriferous oxide magnetic microspheres (Fe3O4@PA). Mass transfer of PAHs from sample solution to Fe3O4@PA was greatly increased owing to unique properties including large surface area (58.5 m2 g-1), high pore volume (0.10 cm3 g-1) and thin coating layer (50 nm). Freely dissolved PAHs can be selectively extracted because of the mesoporous structure of PA coating layer with uniform pore size of 7.08 nm. However, bound forms of PAHs would not be able to access into pore channels due to size exclusion. In comparison with long equilibration time (139 h) by nd-SPME, equilibrium can be reached within 29 min (t90%) using Fe3O4@PA as novel sorbents. The sorption coefficients (log KBSA) of PAHs to bull serum albumin (BSA) ranged from 3.36 to 4.87, which are consistent with the values measured by nd-SPME (log KBSA = 3.64-5.12). Finally, the freely dissolved PAHs (Cfree) measured by the proposed method (0.69-1.92 µg L-1) have a good agreement with that by nd-SPME (0.56-2.11 µg L-1), indicating that it is feasible for rapid determination of free forms of compounds in real samples by Fe3O4@PA.

Processing and properties of magnesium alloy micro-tubes for biodegradable vascular stents.

Magnesium alloys are considered to be one of the most promising stent materials due to their good biological compatibility and biodegradable properties. However, the poor workability at room temperature restricts the processing of high-precision micro-tubes for the application as stent materials. In this study, Mg-Zn-Y-Nd alloy tube blank was firstly produced through hot extrusion. By multi-pass cold drawing combining with interpass annealing, the extruded tube blank can be processed into high-precision micro-tube with an outer diameter of about 2.0 mm and a wall thickness of about 0.15 mm. The drawn micro-tube after annealing exhibits improved mechanical properties with an ultimate tensile strength of about 298 MPa and a large breaking elongation of up to 20%. Meanwhile, the micro-tube shows good corrosion resistance with a trend of uniform corrosion in simulated body fluid solution. The investigation revealed that a significant improvement in the mechanical properties is mainly attributed to grain refinement and texture weaken, while the good biodegradable properties is related with the low density of crystallographic defects as well as fine and homogeneous microstructure. As a result, the successful processing of magnesium alloy micro-tube provides the precursor for laser engraving stents.

A rapamycin-releasing perivascular polymeric sheath produces highly effective inhibition of intimal hyperplasia.

Intimal hyperplasia produces restenosis (re-narrowing) of the vessel lumen following vascular intervention. Drugs that inhibit intimal hyperplasia have been developed, however there is currently no clinical method of perivascular drug-delivery to prevent restenosis following open surgical procedures. Here we report a poly(ε-caprolactone) (PCL) sheath that is highly effective in preventing intimal hyperplasia through perivascular delivery of rapamycin. We first screened a series of bioresorbable polymers, i.e., poly(lactide-co-glycolide) (PLGA), poly(lactic acid) (PLLA), PCL, and their blends, to identify desired release kinetics and sheath physical properties. Both PLGA and PLLA sheaths produced minimal (<30%) rapamycin release within 50days in PBS buffer. In contrast, PCL sheaths exhibited more rapid and near-linear release kinetics, as well as durable integrity (>90days) as evidenced in both scanning electron microscopy and subcutaneous embedding experiments. Moreover, a PCL sheath deployed around balloon-injured rat carotid arteries was associated with a minimum rate of thrombosis compared to PLGA and PLLA. Morphometric analysis and immunohistochemistry revealed that rapamycin-loaded perivascular PCL sheaths produced pronounced (85%) inhibition of intimal hyperplasia (0.15±0.05 vs 1.01±0.16), without impairment of the luminal endothelium, the vessel's anti-thrombotic layer. Our data collectively show that a rapamycin-loaded PCL delivery system produces substantial mitigation of neointima, likely due to its favorable physical properties leading to a stable yet flexible perivascular sheath and steady and prolonged release kinetics. Thus, a PCL sheath may provide useful scaffolding for devising effective perivascular drug delivery particularly suited for preventing restenosis following open vascular surgery.