Nanopatterning of beaded poly(lactic acid) nanofibers for highly electroactive, breathable, UV-shielding and antibacterial protective membranes.

Despite great potential in fabrication of biodegradable protective membranes by electrospinning of poly(lactic acid) (PLA) nanofibers, it is still thwarted by smooth surfaces and poor electroactivity that challenge the promotion of electret properties and long-term air filtration performance. Here, a microwave-assisted synthetic method was used to customize dielectric TiO2 nanocrystals of ultrasmall and uniform dimensions (∼30 nm), which were homogeneously embedded at beaded PLA nanofibers (PLA@TiO2, diameter of around 280 nm) by the combined "electrospinning-electrospray" approach. With small amounts of TiO2 (2, 4 and 6 wt%), the nanopatterned PLA@TiO2 nanofibrous membranes (NFMs) were characterized by largely increased dielectric constants (nearly 1.9), surface potential (up to 1.63 kV) and triboelectric properties (output voltage of 12.2 V). Arising from the improved electroactivity and self-charging mechanisms, the nanopatterned PLA@TiO2 NFMs exhibited remarkable PM0.3 filtration properties (97.9 %, 254.6 Pa) even at the highest airflow rate of 85 L/min, surpassing those of pure PLA membranes (86.2 %, 483.7 Pa). This was moreover accompanied by inhibition rates of 100 % against both E. coli and S. aureus, as well as excellent UV-blocking properties (UPF as high as 3.8, TUVA of 50.9 % and TUVB of 20.1 %). The breathable and electroactive nanopatterned PLA NFMs permit promising applications in multifunctional protective membranes toward excellent UV shielding and high-efficiency removal of both PMs and pathogens.

Interfacial Polarization Strategy to Electroactive Poly(lactic acid) Nanofibers for Humidity-Resistant Respiratory Protection and Machine Learning-Assisted Monitoring.

The advancement of intelligent and biodegradable respiratory protection equipment is pivotal in the realm of human health engineering. Despite significant progress, achieving a balance between efficient filtration and intelligent monitoring remains a great challenge, especially under conditions of high relative humidity (RH) and high airflow rate (AR). Herein, we proposed an interfacial stereocomplexation (ISC) strategy to facilitate intensive interfacial polarization for poly(lactic acid) (PLA) nanofibrous membranes, which were customized for machine learning-assisted respiratory diagnosis. Theoretical principles underlying the facilitated formation of the electroactive phase and aligned PLA chains were quantitatively depicted in the ISC-PLA nanofibers, contributing to the increased dielectric constant and surface potential (as high as 2.2 and 5.1 kV, respectively). Benefiting from the respiration-driven triboelectric mechanisms, the ISC-PLA demonstrated a high PM0.3 filtration efficiency of over 99% with an ultralow pressure drop (75 Pa), even in challenging circumstances (95 ± 5% RH, AR of 85 L/min). Furthermore, we implemented the ISC-PLA with multifunction respiratory monitoring (response time of 0.56 s and recovery time of 0.25 s) and wireless transmission technology, yielding a high recognition rate of 83% for personal breath states. This innovation has practical implications for health management and theoretical advancements in respiratory protection equipment.

Bio-inspired gradient poly(lactic acid) nanofibers for active capturing of PM0.3 and real-time respiratory monitoring.

The concept of bio-inspired gradient hierarchies, in which the well-defined MOF nanocrystals serve as active nanodielectrics to create electroactive shell at poly(lactic acid) (PLA) nanofibers, is introduced to promote the surface activity and electroactivity of PLA nanofibrous membranes (NFMs). The strategy enabled significant refinement of PLA nanofibers during coaxial electrospinning (∼40 % decline of fiber diameter), accompanied by remarkable increase of specific surface area (nearly 1.5 m2/g), porosity (approximately 85 %) and dielectric constants for the bio-inspired gradient PLA (BG-PLA) NFMs. It largely boosted initial electret properties and electrostatic adsorption capability of BG-PLA NFMs, as well as charge regeneration by TENG mechanisms even under high-humidity environment. The BG-PLA NFMs thus featured exceptionally high PM0.3 filtration efficiencies with well-controlled air resistance (94.3 %, 163.4 Pa, 85 L/min), in contrast to the relatively low efficiency of only 80.0 % for normal PLA. During the application evaluation of outdoor air purification, excellent long-term filtering performance was demonstrated for the BG-PLA for up to 4 h (nearly 98.0 %, 53 Pa), whereas normal PLA exhibited a gradually declined filtration efficiency and an increased pressure drop. Moreover, the BG-PLA NFMs of increased electroactivity were ready to generate tribo-output currents as driven by respiratory vibrations, which enabled real-time monitoring of electrophysiological signals. This bio-inspired gradient strategy opens up promising pathways to engender biodegradable nanofibers of high surface activity and electroactivity, which has significant implications for intelligent protective membranes.

Biodegradable Electroactive Nanofibrous Air Filters for Long-Term Respiratory Healthcare and Self-Powered Monitoring.

The concept of triboelectric nanogenerator (TENG)-based fibrous air filters, in which the electroactive fibers are ready to enhance the electrostatic adsorption by sustainable energy harvesting, is appealing for long-term respiratory protection and in vivo real-time monitoring. This effort discloses a self-reinforcing electroactivity strategy to confer extreme alignment and refinement of the electrospun poly(lactic acid) (PLA) nanofibers, significantly facilitating formation of electroactive phases (i.e., ß-phase and highly aligned chains and dipoles) and promotion of polarization and electret properties. It endowed the PLA nanofibrous membranes (NFMs) with largely increased surface potential and filtration performance, as exemplified by efficient removal of PM0.3 and PM2.5 (90.68 and 99.82%, respectively) even at the highest airflow capacity of 85 L/min. With high electroactivity and a well-controlled morphology, the PLA NFMs exhibited superior TENG properties triggered by regular respiratory vibrations, enabling 9.21-fold increase of surface potential (-1.43 kV) and nearly 68% increase of PM0.3 capturing (94.3%) compared to those of conventional PLA membranes. The remarkable TENG mechanisms were examined to elaborately monitor the personal respiration characteristics, particularly those triggered large and rapid variations of output voltages like coughing and tachypnea. Featuring desirable biocompatibility and degradability, the self-powered PLA NFMs permit promising applications in the fabrication of ecofriendly air filters toward high-performance purification and intelligent monitoring.

Nanopatterned Electroactive Polylactic Acid Nanofibrous MOFilters for Efficient PM0.3 Filtration and Bacterial Inhibition.

Biodegradable polylactic acid (PLA) nanofibrous membranes (NFMs) hold great potential to address the increasing airborne particulate matter (PM) and dramatic accumulation of plastic/microplastic pollution. However, the field of PLA NFM-based filters is still in its infancy, frequently dwarfed by the bottlenecks regarding relatively low surface activity, poor electroactivity, and insufficient PM capturing mechanisms. This effort discloses a microwave-assisted approach to minute-level synthesis of dielectric ZIF-8 nanocrystals with high specific surface area (over 1012 m2/g) and ultrasmall size (∼240 nm), which were intimately anchored onto PLA nanofibers (PLA@ZIF-8) by a combined "electrospinning-electrospray" strategy. This endowed the PLA@ZIF-8 NFMs with largely increased electroactivity in terms of elevated dielectric coefficient (an increase of 202%), surface potential (up to 5.8 kV), and triboelectric properties (output voltage of 30.8 V at 10 N, 0.5 Hz). Given the profound control over morphology and electroactivity, the PLA@ZIF-8 NFMs exhibited efficient filtration of PM0.3 (97.1%, 85 L/min) with a decreased air resistance (592.5 Pa), surpassing that of the pure PLA counterpart (88.4%, 650.9 Pa). This was essentially ascribed to realization of multiple filtration mechanisms for PLA@ZIF-8 NFMs, including enhanced physical interception, polar interactions, and electrostatic adsorption, and the unique self-charging function triggered by airflow vibrations. Moreover, perfect antibacterial performance was achieved for PLA@ZIF-8, showing ultrahigh inhibition rates of 99.9 and 100% against E. coli and S. aureus, respectively. The proposed hierarchical structuring strategy, offering the multifunction integration unattainable with conventional methods, may facilitate the development of biodegradable long-term air filters.

High-heat and UV-barrier poly(lactic acid) by microwave-assisted functionalization of waste natural fibers.

The application of poly(lactic acid) (PLA) in the packaging area is frequently dwarfed by the inadequate gas/water barrier properties, low heat resistance and high UV transmittance. Herein, an environmentally friendly and high-efficiency microwave-assisted functionalization (MAF) approach was proposed to aqueous grafting waste bamboo fibers with the bridging agent. It permitted significant promotion of interfacial interactions between the MAF bamboo fibers (MAFBs) and neighboring PLA chains, contributing to uniform dispersion and intimate interphase. Featuring the morphological features, the MAFB-reinforced (5, 10 and 20 wt%) PLA biocomposites achieved an unexpected combination of high mechanical properties, exceptional resistance to heat deflection and UV irradiation, and excellent water barrier performance. Upon addition of only 5 wt% MAFBs, the tensile strength and toughness of PLA composite films were increased to 46.5 MPa and 0.6 MJ/m3, increasing over 52 % and nearly 107 % compared to those of the counterpart loaded pristine bamboo fibers (PBFs), respectively. This was favorably accompanied by the remarkably reduced water vapor permeability, falling down to the lowest value of 3.5 × 10-11 g∙m/Pa∙s∙m2 for PLA/MAFB (80/20) with a decrease of nearly 79 % compared to the counterpart. It is of interest to note the MAFB-enabled nearly 100 % UV-blocking ratio for PLA loaded 10 and 20 wt% fibers, as well as excellent resistance to heat deflection even at high temperatures like 120 °C. This effort paves the way to multifunctional natural fibers with high affinity to PLA for elegant implementation of high-heat and UV-resistant packaging materials in an ecofriendly manner.