Three-Dimensional Anthropometric Facial Analysis and Fitting Discrepancies Between Stereophotogrammetry and CT.

BACKGROUND: The reliability and repeatability of stereophotogrammetry and CT in 3-dimensional anthropometric facial analysis were investigated in this study, which also explored the clinical application of supine CT. METHOD: In this study, 3D CT and 3dMD stereophotogrammetry were used on 20 healthy volunteers. The fitting distance between stereophotogrammetry and CT scans at landmark points was measured, along with facial feature measurements (Al-Al) face width (Go-Go, Zy-Zy, Ex-Ex), and hemi-face height (Sn-Gn). The intraclass correlation coefficient (ICC) was employed to assess interrater agreement and to verify the reliability of the measurement methods. Paired t-analysis was utilized for analyzing intramethod displacement. RESULTS: The alare, nasion, and pronasale points were found to be minimally influenced by different positions and are more recommended as landmark points for registration. CT demonstrated good interrater reliability on all indicators. In stereophotogrammetry, measurements for Go-Go and Zy-Zy displayed an interclass correlation coefficient (ICC) of less than 0.75. Significant differences between the 2 methods were observed for En-En, Ex-Ex, and Go-Go (P < 0.05). Specifically, CT analysis for Go-Go showed a measurement 2.34 mm larger than that obtained with the 3dMD method. CONCLUSION: Both CT and stereophotogrammetry were found to be reliable methods for evaluating facial soft tissue. It is speculated that Go-Go measurement is primarily influenced by factors such as different positions, facial expressions, and gravity. These variables should be carefully considered during the evaluation of the mandibular angle region.

Cationic Conjugated Polyelectrolytes with Aggregation-Induced Ratiometric Fluorescence.

The molecular diversity of aggregation-induced emission remains a challenge due to the limitation of conventional synthesis methods. Here, a series of novel neutral and cationic conjugated polymers composed of various ratios of tetraarylethylene (TAE) containing a bridged oxygen (O) and fluorene (F) units is designed and synthesized via the geminal cross-coupling (GCC) of 1,1-dibromoolefins. The incorporation of TAE segments into the conjugated backbone of polyfluorene produces pronounced aggregation-induced ratiometric fluorescence, i.e., aggregation-induced emission (AIE) at 520-600 nm and grows synergistically with aggregations-caused quenching (ACQ) at 400-450 nm. The content of fluorene unit in the polymer backbones determines the intensity of the initial fluorescence in the blue light region. The huge distinction (about 150 nm) in dual emission wavelengths caused by the environment change makes these conjugated polyelectrolytes particularly suitable for ratiometric fluorescence sensing. Based on electrostatic interaction mechanism, the gradual addition of heparin into the cationic conjugated polymers aqueous solutions can induce dual-color fluorescence changes with a detection limit of 9 × 10-9 m. This work exhibits the great facility of using GCC reaction to synthesis the conjugated TAE polymers with superior AIE properties and special functions.

New application of an old drug proparacaine in treating epilepsy via liposomal hydrogel formulation.

Proparacaine (PPC) is a previously discovered topical anesthetic for ophthalmic optometry and surgery by blocking the central Nav1.3. In this study, we found that proparacaine hydrochloride (PPC-HCl) exerted an acute robust antiepileptic effect in pilocarpine-induced epilepsy mice. More importantly, chronic treatment with PPC-HCl totally terminated spontaneous recurrent seizure occurrence without significant toxicity. Chronic treatment with PPC-HCl did not cause obvious cytotoxicity, neuropsychiatric adverse effects, hepatotoxicity, cardiotoxicity, and even genotoxicity that evaluated by whole genome-scale transcriptomic analyses. Only when in a high dose (50 mg/kg), the QRS interval measured by electrocardiography was slightly prolonged, which was similar to the impact of levetiracetam. Nevertheless, to overcome this potential issue, we adopt a liposome encapsulation strategy that could alleviate cardiotoxicity and prepared a type of hydrogel containing PPC-HCl for sustained release. Implantation of thermosensitive chitosan-based hydrogel containing liposomal PPC-HCl into the subcutaneous tissue exerted immediate and long-lasting remission from spontaneous recurrent seizure in epileptic mice without affecting QRS interval. Therefore, this new liposomal hydrogel formulation of proparacaine could be developed as a transdermal patch for treating epilepsy, avoiding the severe toxicity after chronic treatment with current antiepileptic drugs in clinic.

Pretreatment of rice straw with recycled ionic liquids by phase-separation process for low-cost biorefinery.

An efficient ionic liquids (ILs) recycle technology will increase the economic viability of lignocellulosic biorefinery. The availability of recycling 1-butyl-3-methylimidazolium chloride for rice straw (RS) pretreatment was conducted. The kosmotropic salt K3 PO4 (TKP) solution was used as antisolvent for cellulose precipitation and forming a three-phase system consisting of biomass, ILs-rich, and salt-rich phases. The upper ILs phase and the bottom TKP phase were recycled without additional purification, which significantly simplifies the process for recovering ILs. Subsequently, the RS pretreated with multiple reusing ILs (RPRS) were investigated by components analysis, structure evolution, enzymatic hydrolysis, and fermentation experiments. The results showed that unpurified reusing ILs led to further delignification and improvement of enzyme accessibility of the pretreated RS. The reducing sugar yield of RS pretreated with 8th reusing IL (8th RPRS) could still reach 98.9%, and the ethanol and succinic acid concentrations achieved 91.9 and 29.3 g/L by simultaneous saccharification and cofermentation. The present study demonstrated that the ILs recovered by phase-separation process could be used for RS pretreatment, and achieving high titer ethanol fermentation.

Comparison of Serum Hepatitis B Virus RNA Levels and Quasispecies Evolution Patterns between Entecavir and Pegylated-Interferon Mono-treatment in Chronic Hepatitis B Patients.

Hepatitis B virus (HBV) RNA may independently predict virological and serological response. This study aimed to compare dynamic changes in serum HBV RNA levels and HBV quasispecies evolution patterns between entecavir and pegylated-interferon mono-treatment in chronic hepatitis B patients and to determine the clinical significance during treatment. TaqMan real-time PCR was used for quantitative analysis. HBV RNA levels were retrospectively determined in serial serum samples from 178 chronic hepatitis B patients who received either entecavir or pegylated-interferon treatment. Both serum HBV DNA and RNA quasispecies were analyzed via next-generation sequencing. Receiver operating characteristics (ROC) analysis was performed to evaluate the prediction value of individual biomarkers for hepatitis B e antigen (HBeAg) seroconversion. Patients who received pegylated-interferon treatment showed stronger declines in HBV RNA levels than did those who received entecavir treatment. Serum HBV RNA levels were lower in patients with subsequent HBeAg seroconversion. At baseline, the level of HBV RNA was better than other indicators in predicting HBeAg seroconversion. Moreover, the predictive value of serum HBV RNA levels was better in the entecavir group. Baseline HBV RNA exhibited a significantly higher genetic diversity than HBV DNA and had a significant decline after 4 weeks of entecavir treatment. Higher baseline genetic diversity may result in a better outcome in pegylated-interferon-treated patients. Serum HBV RNA levels showed different decline kinetics, and HBV RNA quasispecies showed different evolution patterns in entecavir and pegylated-interferon mono-treatment. Taken together, serum HBV RNA may serve as a promising biomarker of HBeAg seroconversion in patients during antiviral treatment.

Serum M2BPGi level is a novel predictive biomarker for the responses to pegylated interferon-α treatment in HBeAg-positive chronic hepatitis B patients.

Serum Mac-2-binding protein glycosylation isomer (M2BPGi) level was found to be a useful prognostic marker for hepatitis B e antigen (HBeAg)-positive chronic hepatitis B (CHB) patients treated with nucleoside/nucleotide analogs (NUCs) therapy, and the aim of our study is to evaluate the clinical implementation of M2BPGi level in the prediction of antiviral responses to pegylated-interferon-α (PEG-IFN-α) treatment in HBeAg-positive CHB patients. Ninety-six CHB patients who received PEG-IFN-α treatment for at least 48 weeks were recruited. The serum M2BPGi, alanine aminotransferase (ALT), hepatitis B surface antigen (HBsAg), HBeAg, and HBV DNA levels at baseline, weeks 4, 12, and 24 after PEG-IFN-α treatment were determined and their associations with antiviral responses were evaluated and the virological response (VR) rate and serological response (SR) rate after 48 weeks of treatment were 65.6% and 35.4%, respectively. Baseline serum M2BPGi level was significantly different between VR and non-VR (P = 0.002) or SR and non-SR groups (P = 0.012). Multivariate analyses suggested that baseline serum M2BPGi level was independently associated with VR and SR of PEG-IFN-α treatment at week 48. The area under the ROC curve (AUC) of baseline M2BPGi was 0.682 in predicting VR, which was superior to HBsAg (AUC = 0.566) or HBV DNA (AUC = 0.567). The AUC of baseline M2BPGi in predicting SR was 0.655, which was also higher than that of HBsAg (AUC = 0.548) or HBV DNA (AUC = 0.583). These results suggested that baseline serum M2BPGi level was a novel predictor of VR and SR for PEG-IFN-α treatment in HBeAg-positive CHB patients.

Direct hydrogen production from dilute-acid pretreated sugarcane bagasse hydrolysate using the newly isolated Thermoanaerobacterium thermosaccharolyticum MJ1.

BACKGROUND: Energy shortage and environmental pollution are two severe global problems, and biological hydrogen production from lignocellulose shows great potential as a promising alternative biofuel to replace the fossil fuels. Currently, most studies on hydrogen production from lignocellulose concentrate on cellulolytic microbe, pretreatment method, process optimization and development of new raw materials. Due to no effective approaches to relieve the inhibiting effect of inhibitors, the acid pretreated lignocellulose hydrolysate was directly discarded and caused environmental problems, suggesting that isolation of inhibitor-tolerant strains may facilitate the utilization of acid pretreated lignocellulose hydrolysate. RESULTS: Thermophilic bacteria for producing hydrogen from various kinds of sugars were screened, and the new strain named MJ1 was isolated from paper sludge, with 99% identity to Thermoanaerobacterium thermosaccharolyticum by 16S rRNA gene analysis. The hydrogen yields of 11.18, 4.25 and 2.15 mol-H2/mol sugar can be reached at an initial concentration of 5 g/L cellobiose, glucose and xylose, respectively. The main metabolites were acetate and butyrate. More important, MJ1 had an excellent tolerance to inhibitors of dilute-acid (1%, g/v) pretreated sugarcane bagasse hydrolysate (DAPSBH) and could efficiently utilize DAPSBH for hydrogen production without detoxication, with a production higher than that of pure sugars. The hydrogen could be quickly produced with the maximum hydrogen production reached at 24 h. The hydrogen production reached 39.64, 105.42, 111.75 and 110.44 mM at 20, 40, 60 and 80% of DAPSBH, respectively. Supplementation of CaCO3 enhanced the hydrogen production by 21.32% versus the control. CONCLUSIONS: These results demonstrate that MJ1 could directly utilize DAPSBH for biohydrogen production without detoxication and can serve as an excellent candidate for industrialization of hydrogen production from DAPSBH. The results also suggest that isolating unique strains from a particular environment offers an ideal way to conquer the related problems.

Robot-Assisted Surgery for Mandibular Angle Split Osteotomy Using Augmented Reality: Preliminary Results on Clinical Animal Experiment.

Mandibular angle split osteotomy (MASO) is a procedure widely used for prominent mandibular angles. However, conventional mandibular plastic surgery is invasive and high risk. It may induce postoperative neurosensory disturbance of the inferior alveolar nerve, fractures and infection due to the complexity of the anatomical structure and the narrow surgical field of view. The success rate of MASO surgery usually depends on the clinical experience and skills of the surgeon. To evaluate the performance of inexperienced plastic surgeons conducting this surgery, a self-developed and constructed robot system based on augmented reality is used. This robot system provides for sufficient accuracy and safety within the clinical environment. To evaluate the accuracy and safety of MASO surgery, an animal study using this robot was performed in the clinical room, and the results were then evaluated. Four osteotomy planes were successfully performed on two dogs; that is, twenty tunnels (each dog drilled on bilaterally) were drilled in the dogs' mandible bones. Errors at entrance and target points were 1.04 ± 0.19 and 1.22 ± 0.24 mm, respectively. The angular error between the planned and drilled tunnels was 6.69° ± 1.05°. None of the dogs experienced severe complications. Therefore, this technique can be regarded as a useful approach for training inexperienced plastic surgeons on the various aspects of plastic surgery. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

A study of an assisting robot for mandible plastic surgery based on augmented reality.

BACKGROUND: Mandible plastic surgery plays an important role in conventional plastic surgery. However, its success depends on the experience of the surgeons. In order to improve the effectiveness of the surgery and release the burden of surgeons, a mandible plastic surgery assisting robot, based on an augmented reality technique, was developed. MATERIAL AND METHODS: Augmented reality assists surgeons to realize positioning. Fuzzy control theory was used for the control of the motor. During the process of bone drilling, both the drill bit position and the force were measured by a force sensor which was used to estimate the position of the drilling procedure. RESULTS: An animal experiment was performed to verify the effectiveness of the robotic system. The position error was 1.07 ± 0.27 mm and the angle error was 5.59 ± 3.15°. The results show that the system provides a sufficient accuracy with which a precise drilling procedure can be performed. In addition, under the supervision's feedback of the sensor, an adequate safety level can be achieved for the robotic system. CONCLUSION: The system realizes accurate positioning and automatic drilling to solve the problems encountered in the drilling procedure, providing a method for future plastic surgery.

Optical nanoimaging for block copolymer self-assembly.

One approach toward optical nanoimaging involves sequential molecular localization of photoswitchable fluorophores to achieve high resolution beyond optical limit of diffraction. Block copolymer micelles assembled from polystryrene-block-poly(ethylene oxide) block copolymers (PSt-b-PEO) are visualized in optical nanoimaging by staining the polystyrene blocks with spiropyrans (SPs). SPs localized in hydrophobic phase of block copolymer micelles exhibit reversible fluorescence on-off switching at alternating irradiation of UV and visible light. Phase-selective distribution of SPs in block copolymer micelles enables optical nanoimaging of microphase structures of block copolymer self-assembly at 50-nm resolution. To date, this is the sturdiest realization of optical nanoimaging with subdiffraction resolution for solution self-assembly of block copolymers.

Treating Parry-Romberg Syndrome Using Three-Dimensional Scanning and Printing and the Anterolateral Thigh Dermal Adipofascial Flap.

BACKGROUND: As three-dimensional technology becomes more ubiquitous, many plastic surgical applications have emerged. The authors investigate a three-dimensional scanning and printing system for facial soft tissue reconstruction in conjunction with an anterolateral thigh dermal adipofascial flap for the treatment of Parry-Romberg syndrome. METHODS: Seven patients with facial atrophy of the zygomatic, buccal, and mandibular areas were included. Three-dimensional scanning of each patient's face in conjunction was analyzed with computer-aided design (CAD) to quantify areas of facial asymmetry. Models were then created using three-dimensional printing to map areas of soft tissue deficiency. Free anterolateral thigh (ALT) dermal adipofascial flaps were designed based on the three-dimensional models of soft tissue deficiency. RESULTS: All flaps survived. One case had a postoperative hematoma. Six patients had restored facial symmetry. One patient required fat injections to obtain symmetry. No patients required revision surgery of their healed flaps for contouring. CONCLUSIONS: Three-dimensional laser scanning and three-dimensional printing in combination with a free ALT dermal adipofascial flap offer surgeons a precise means to reconstruct facial contour deformities.

Histochemical studies on the distribution and accumulation of trans-polyisoprene in the rubber-producing plant Eucommia ulmoides.

Eucommia ulmoides rubber (EUR) is a high-quality natural rubber resource, which can be extracted from different organs of the Eucommia ulmoides tree. In this study, EUR was isolated from the leaves, barks, and pericarps, and the structural characteristics and physicochemical properties of EUR were systematically determined. The accumulation and distribution of EUR in different tissues were assessed through in situ observations combined with cellular and subcellular scales. The preliminary analyses indicated that the variations in the physicochemical properties of EUR across different tissues were associated with its accumulation microstructure. Further analyses by SEM and TEM showed that the initial cell differentiation and fusion resulted in the formation of tubular structures without any nucleus. A limited number of rubber particles were generated within the cytoplasm, concurrent with aggregation and fusion. Eventually, rubber particles filled the entire cytoplasm, and organelles disappeared to form highly aggregated filamentous structures. In addition, the number and area of EUR-containing cells were closely related to the organization sizes of barks and leaves. This study provided valuable insights into Eucommia ulmoides histology and the rubber industry.

Leaching kinetics and bioaccumulation potential of additive-derived organophosphate esters in microplastics.

Considerable research has been conducted to evaluate microplastics (MPs) as vehicles for the transfer of hazardous pollutants in organisms. However, little effort has been devoted to the chemical release of hazardous additive-derived pollutants from MPs in gut simulations. This study looked at the leaching kinetics of organophosphate esters (OPFRs) from polypropylene (PP) and polystyrene (PS) MPs in the presence of gut surfactants, specifically sodium taurocholate, at two biologically relevant temperatures for marine organisms. Diffusion coefficients of OPFRs ranged from 1.71 × 10-20 to 4.04 × 10-18 m2 s-1 in PP and 2.91 × 10-18 to 1.51 × 10-15 m2 s-1 in PS. The accumulation factors for OPFRs in biota-plastic and biota-sediment interactions ranged from 1.52 × 10-3-69.1 and 0.02-0.7, respectively. Based on B3LYP/6-31G (d,p) calculations, the biodynamic model analysis revealed a slight increase in the bioaccumulation of OPFRs at a minor dose of 0.05% MPs. However, at higher concentrations (0.5% and 5% MPs), there was a decrease in bioaccumulation compared to the lower concentration for most OPFR compounds. In general, the ingestion of PE MPs notably contributed to the bioaccumulation of OPFRs in lugworms, whereas the contribution of PP and PS MPs was minimal. This could vary among sites exhibiting varying levels of MP concentrations or MPs displaying stronger affinities towards chemicals.

Right bronchopleural fistula treated with a novel, Y-shaped, single-plugged, covered, metallic airway stent.

BACKGROUND: Bronchopleural fistula (BPF) is an infrequent but life-threatening complication after pneumonectomy. The incidence of BPF reported in the literature varies from 0.3% to 20%. PURPOSE: To determine the feasibility and efficacy of using Y-shaped, single-plugged, covered, metallic stents to treat right bronchopleural fistulas. MATERIAL AND METHODS: We have designed a Y-shaped, single-plugged, covered, self-expandable, metallic airway stent to fit the specific anatomy of the right main bronchus. The stent has a main tube and two branches, resembling an inverted "Y". One of the branches is closed (plugged) and bullet-shaped; the other one tubular and open. The entire stent is encased in a nitinol wire mesh. Stent size can be individualized using multislice spiral computed tomography (MSCT) measurements of the airways. Under fluoroscopic guidance, we have implanted 15 Y-shaped stents in 15 patients with right bronchopleural fistulas. RESULTS: Stent insertion was successful in all patients. All fistulas were successfully closed immediately after stent placement. Follow-up was performed for 1-34 months. Positive clinical outcomes were seen in 13 of 15 patients. Two patients died of intractable pulmonary infection and multiorgan failure. The fistula completely healed and the stent could be removed in five patients; however, two of them were left with a small, aseptic, residual right lung cavity. The remaining eight patients are still alive with the stent in situ. CONCLUSION: The placement of Y-shaped, single-plugged, covered, self-expandable metallic airway stents seems to be a feasible and safe method for the treatment of bronchopleural fistulas involving the right main bronchus. This stent is a promising therapeutic alternative for bronchopleural fistulas involving the right main bronchus.

A novel estrogen-targeted PEGylated liposome co-delivery oxaliplatin and paclitaxel for the treatment of ovarian cancer.

Ovarian cancer is the second cause of death among gynecological malignancies. In this study, we designed a novel estrogen-targeted PEGylated liposome loaded with oxaliplatin and paclitaxel (ES-SSL-OXA/PTX) which could target estrogen receptor (ER) highly expressed on the surface of SKOV-3 cells to enhance therapeutic efficacy and reduce the side effects for SKOV-3 tumor therapy. ES-SSL-OXA/PTX was prepared by thin film hydration method and exhibited a uniform spherical morphology. Encapsulation efficiency (EE) were determined by HPLC method with the results of 44.10% for OXA and 65.85% for PTX. The mean particle size and polydispersity index (PDI) were 168.46 nm and 0.145, respectively. In vivo and in vitro targeting study confirmed that ES-SSL-OXA/PTX has optimum specific targeting ability. Meanwhile, In vitro and in vivo antitumor results of ES-SSL-OXA/PTX exhibited a superior antiproliferative effect on SKOV-3 cells and a stronger anti-tumor efficacy with the tumor inhibition rate of 85.24%. The pharmacokinetics results of ES-SSL-OXA/PTX showed a prolonged half-life time and a slowed clearance rate. The preliminary safety study of acute toxicity and long-term toxicity demonstrated ES-SSL-OXA/PTX exhibited a reduced toxicity profile. Based on the above results, ES-SSL-OXA/PTX could be a promising novel formulation for the treatment of ovarian cancer in future clinic.

A novel deformable liposomal hydrogel loaded with a SREBP-1-inhibiting polypeptide for reducing sebum synthesis in golden hamster model.

Excessive sebum is the major factor involved in the pathophysiology of seborrheic diseases. Chemical medicines can result in mild to severe side effects. Polypeptides with much less side effects make them ideal for reducing sebum synthesis. Sterol regulatory element-binding proteins-1 (SREBP-1) is necessary for the biosynthesis of sterols. A SREBP-1-inhibiting polypeptide (SREi), which competitively inhibits the ubiquitination of Insig-1 so as to suppress the activation of SREBP-1 was selected as an active ingredient and formulated into skin topical preparations. The SREi anionic deformable liposomes contained sodium deoxycholate (SDCh) at the concentration of 4.4 mg/mL (SREi-ADL3) and SREi-ADL3 in 0.3% (w/v) carbomer hydrogel (SREi-ADL3-GEL) were prepared and characterized. The SREi-ADL3 presented a high entrapment efficiency of 92.62 ± 6.32%, a particle size of 99.54 ± 7.56 nm and a surface charge of -19.18 ± 0.45 mV. SREi-ADL3-GEL exhibited a sustained release behavior, a higher stability, a much more cellular uptake ability and transdermal absorption. In vivo golden hamster model confirmed that SREi-ADL3-GEL presented the strongest inhibitory effect on sebaceous gland growth and sebum synthesis by down-regulating the mRNA and protein expression of SREBP-1, fatty acid synthase (FAS) and acetyl-coenzyme A carboxylase 1 (ACC1). As confirmed by histological analysis, only a small amount of sebaceous gland lobes with the lightest staining intensity and the smallest dyeing area could be observed in the SREi-ADL3-GEL group. Taken together, SREi-ADL3-GEL displayed potential applications in sebum excessive production related diseases.

Highly Sensitive and Omnidirectionally Stretchable Bioelectrode Arrays for In Vivo Neural Interfacing.

Flexible electrode array, a new-generation neural microelectrode, is a crucial tool for information exchange between living tissues and external electronics. Till date, advances in flexible neural microelectrodes are limited because of their high impedance and poor mechanical consistency at tissue interfaces. Herein, a highly sensitive and omnidirectionally stretchable polymeric electrode array (PEA) is introduced. Micropyramid-nanowire composite structures are constructed to increase the effective surface area of PEA, achieving an exponential reduction in impedance compared with gold (Au) and flat polypyrrole electrodes. Moreover, for the first time, a suspended umbrella structure to enable PEA with omnidirectional stretchability of up to ≈20% is designed. The PEA can withstand 1000 cycles of mechanical loads without decrease in performance. As a proof of concept, PEA is conformally attached to a rat heart and tibialis anterior muscle, and electrophysiological signals (electrocardiogram and electromyogram) of the rat are successfully recorded. This strategy provides a new perspective toward highly sensitive and omnidirectionally stretchable PEA that can facilitate the practical application of neural electrodes.

Biodegradable nanoparticles of mPEG-PLGA-PLL triblock copolymers as novel non-viral vectors for improving siRNA delivery and gene silencing.

Degradation of mRNA by RNA interference is one of the most powerful and specific mechanisms for gene silencing. However, insufficient cellular uptake and poor stability have limited its usefulness. Here, we report efficient delivery of siRNA via the use of biodegradable nanoparticles (NPs) made from monomethoxypoly(ethylene glycol)-poly(lactic-co-glycolic acid)-poly-l-lysine (mPEG-PLGA-PLL) triblock copolymers. Various physicochemical properties of mPEG-PLGA-PLL NPs, including morphology, size, surface charge, siRNA encapsulation efficiency, and in vitro release profile of siRNA from NPs, were characterized by scanning electron microscope, particle size and zeta potential analyzer, and high performance liquid chromatography. The levels of siRNA uptake and targeted gene inhibition were detected in human lung cancer SPC-A1-GFP cells stably expressing green fluorescent protein. Examination of the cultured SPC-A1-GFP cells with fluorescent microscope and flow cytometry showed NPs loading Cy3-labeled siRNA had much higher intracellular siRNA delivery efficiencies than siRNA alone and Lipofectamine-siRNA complexes. The gene silencing efficiency of mPEG-PLGA-PLL NPs was higher than that of commercially available transfecting agent Lipofectamine while showing no cytotoxicity. Thus, the current study demonstrates that biodegradable NPs of mPEG-PLGA-PLL triblock copolymers can be potentially applied as novel non-viral vectors for improving siRNA delivery and gene silencing.

Xylose recovery and bioethanol production from sugarcane bagasse pretreated by mild two-stage ultrasonic assisted dilute acid.

Pretreatment can improve biomass biodegradability. Here, a novel sugarcane bagasse (SCB) pretreatment process based on two-stage ultrasonic assisted dilute H2SO4 (TUDA) under mild conditions was reported. After optimization, the pretreatment was shown to significantly degrade hemicellulose (92.40%) and remove lignin (57.41%) of SCB, leading to reduction of inhibitors and an ethanol fermentation efficiency of 93.37% by SSCF under cellulase 10 FPU/g SCB and 30% pretreated SCB loading. Physical characterization revealed that two-stage ultrasonic could better disrupt SCB than traditional ultrasonic by amplifying the collapse effect and synergistically promoting lignin removal through dilute H2SO4. Furthermore, xylose was also effectively recovered from pretreatment supernatant by biochar derived from bagasse. This study established a simple and efficient pretreatment process for high value-added recycling of SCB from solid residue to pretreatment liquid.

Bioaugmentation combined with biochar to enhance thermophilic hydrogen production from sugarcane bagasse.

In this study, Thermoanaerobacterium thermosaccharolyticum MJ2 and biochar were used to enhance thermophilic hydrogen production from sugarcane bagasse. MJ2 bioaugmentation notably increased the hydrogen production by 95.31%, which was further significantly improved by 158.10% by adding biochar. The addition of biochar promoted the degradation of substrate, improved the activities of hydrogenase and electron transfer system, and stimulated microbial growth and metabolism. Microbial community analysis showed that the relative abundance of Thermoanaerobacterium was significantly increased by bioaugmentation and further enriched by biochar. PICRUSt analysis showed that MJ2 combined with biochar promoted metabolic pathways related to substrate degradation and microbial metabolism. This study provides a novel enhancement method for hydrogen production of the cellulolytic microbial consortium by exogenous hydrogen-producing microorganism combined with biochar and deepens the understanding of its functional mechanism.