Polymerization-Induced Helicity Inversion Driven by Stacking Modes and Self-Assembly Pathway Differentiation.

Regulating the mutual stacking arrangements is of great interest for understanding the origin of chirality at different hierarchical levels in nature. Different from molecular level chirality, the control and manipulation of hierarchical chirality in polymer systems is limited to the use of external factors as the energetically demanding switching stimulus. Herein, the first self-assembly strategy of polymerization-induced helicity inversion (PIHI), in which the controlled packing and dynamic stereomutation of azobenzene (Azo) building blocks are realized by in situ polymerization without any external stimulus, is reported. A multiple helicity inversion and intriguing helix-helix transition of polymeric supramolecular nanofibers occurs during polymerization, which is collectively confirmed to be mediated by the transition between functionality-oriented π-π stacking, H-, and J-aggregation. The studies further reveal that helicity inversion proceeds through a delicate interplay of the thermodynamically and kinetically controlled, pathway-dependent interconversion process, which should provide new insight into the origin and handedness control of helical nanostructures with desired chirality.

Visual Ozone Sensor: Structural Color Change of Pendant Selenium-Containing Maleimide Polymers via Oxidation.

Pendant selenium-containing maleimide polymers with different selenium contents are synthesized via a radical copolymerization of styrene and N-butylmaleimide phenyl selenide. The polymer structures are characterized by nuclear magnetic resonance, gel permeation chromatography, Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, and scanning electron microscopy with an energy-dispersive spectrometer, which results in the desired structures and selenium contents. The refractive indices of the polymers, which change as a function of different contents of selenium and oxidative stimuli by H2 O2 or O3 , are investigated. Finally, a photonic crystal (PC) is prepared based on the selenium-containing polymer. The visible color changes of the PC are investigated as a function of different concentrations and contact times of O3 .

2,5-Dimethylfuran/Acrylonitrile as Latent Monomer for Sequence-Controlled Copolymer and Sequence-Dependent Thermo-Responsivity.

Sequence control has attracted increasing attention for its ability of regulating polymer property and performance. Herein, the sequence-controlled polymer containing acrylonitrile (AN) is achieved by using 2,5-dimethylfuran/acrylonitrile adduct as a latent monomer. The temperature-dependent retro Diels-Alder reaction is engaged in controlling the release of AN during RAFT polymerization, that is, regulating the instant AN concentration via a non-invasive and in situ manner. Such control over the instant AN concentration and particularly the molar ratio of comonomer pair leads to the simultaneous change of monomer units in "living" polymeric chain, thus resulting in the sequence-controlled polymeric structures. By delicately manipulating the polymerization temperature, diverse sequence-on-demand structures of AN-containing copolymers, such as poly(AN/methyl methacrylate), poly(AN/styrene), poly(AN/butyl acrylate), poly(AN/N,N-dimethylacrylamide), and poly(AN/N-isopropylacrylamide) are created. Meanwhile, this study presents an initial attempt in tuning the thermal responsivity of poly(AN/N-isopropylacrylamide), which is closely correlated to the sequence of polymer structure. More importantly, the polymer with averagely distributed AN units results in the higher thermal sensitivity. Therefore, the synthetic strategy proposed in this work offers a promising platform for accessing the sequence-controlled copolymers containing AN structures, thus expanding the investigation on the relationship between the polymer structures and correlated properties.

Photo-Controlled Polymerization-Induced Self-Assembly (Photo-PISA): A Novel Strategy Using In Situ Bromine-Iodine Transformation Living Radical Polymerization.

A series of hydrophilic poly(poly(ethylene glycol) methyl ether methacrylate) (PPEGMA) macroinitiators and stabilizers are synthesized in methanol through in situ photo-controlled bromine-iodine transformation living radical polymerization, where ethyl α-bromophenylacetate (EBPA) is the initial initiator and is converted to an iodo-type initiator in the presence of NaI. The subsequent photo-controlled polymerization-induced self-assembly (photo-PISA) process is achieved by adding a second monomer, hydrophobic benzyl methacrylate (BnMA), under irradiation with blue light emitting diode (LED) light at room temperature. The effect of the target degree of polymerization (DP) of PPEGMA, PBnMA, as well as the solids content on the self-assembly behavior of block copolymer PPEGMA-b-PBnMA is evaluated by gel permeation chromatography (GPC), nuclear magnetic resonance (NMR) spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS) characterization. Resulting uniform spherical micelles and vesicle aggregates are observed.

Topological Glycopolymers as Agglutinator and Inhibitor: Cyclic versus Linear.

Carbohydrates play an important role in biological processes for their specific interactions with proteins. Cyclic glycopolymers are promising to mimic the topology of natural macrocycle-biomacromolecules due to their unique architecture of lacking chain ends. To systematically study the effect of glycopolymer architecture on the interactions with protein, the cyclic glycopolymers bearing galactose side-chain (cyclic PMAGn ) with three degrees of polymerization (n = 14, 24, 47) are prepared for the first time. The cyclic PMAGn exhibits unique properties in agglutinating and inhibiting proteins in subsequent studies by comparison with the linear precursor with the same molecular weights. More impressively, the cyclic PMAGn highlight the improved performance of cyclic architecture. For example, the cyclic PMAGn shows superior inhibition abilities to suppress amyloid formation from amyloid ß protein fragment 1-42 aggregation and block the specific interaction between bacteria and galactose-modified surface compared to that of respective linear counterpart. This interesting finding suggests that the architecture of cyclic glycopolymers may be capable of optimizing the ability to bind or inhibit proteins in biological processes.

Cooperation of Amphiphilicity and Smectic Order in Regulating the Self-Assembly of Cholesterol-Functionalized Brush-Like Block Copolymers.

Nanoparticle morphology significantly affects the application of nanometer-scale materials. Understanding nanoparticle formation mechanisms and directing morphological control in nanoparticle self-assembly processes have received wide attention. Herein, a series of brush-like amphiphilic liquid crystalline block copolymers, PChEMA m- b-POEGMA n, containing cholesteryl mesogens with different hydrophobic/hydrophilic block ratios were designed and synthesized. The self-assembly behaviors of the resulting PChEMA m- b-POEGMA n block copolymers in different solvents (tetrahydrofuran/H2O, 1,4-dioxane/H2O, and N, N-dimethylformamide) were investigated in detail. Desirable micellar aggregates with well-organized architectures, including short cylindrical micelles, nanofibers, fringed platelets, and ellipsoidal vesicles with smectic micellar cores, were observed in 1,4-dioxane/H2O with an increasing hydrophobic block ratio. Although both amphiphilicity and smectic order governed the self-assembly, these two factors were differently balanced in the different solvents. This unique supramolecular system provides a new strategy for the design of advanced functional nanomaterials with tunable morphologies.

Organocatalytic Approach to Functional Semifluorinated Polymers Driven by Visible Light.

Through the construction of an organic photocatalysis system, photoredox catalyst (PC)/additive, where PC stands for photoredox catalyst, an organocatalyzed step transfer-addition and radical-termination (O-START) polymerization irradiated by blue LED light at room temperature is realized. Different types of α,ω-diiodoperfluoroalkane A and α,ω-unconjugated diene B are copolymerized through O-START efficiently, and generate various kinds of functional semifluorinated polymers, including polyolefins and polyesters. The process is affected by several factors; solvents, additives, and feed ratio of A to B. After optimization of all these components, the polymerization efficiency is greatly improved, generating polymers with both relatively high yield and molecular weight. Considering the mild reaction condition, easy operation process, and free-of-metal-catalyst residues in the polymer product, the organocatalytic polymerization strategy provides a simple and efficient approach to functional semifluorinated polymer materials and hopefully opens up their application in high-tech fields.

Step Transfer-Addition and Radical-Termination (START) Polymerization of α,ω-Unconjugated Dienes under Irradiation of Blue LED Light.

A new polymerization method, termed as step transfer-addition and radical-termination, is developed for the step-growth radical polymerization of α,ω-unconjugated dienes under irradiation of visible light at room temperature (25 °C) for the first time. α,ω-Diiodoperfluoroalkane monomers (signified as A) are added onto α,ω-unconjugated dienes (signified as B) alternatively and efficiently with the generation of perfluorocarbon-containing alternating copolymers (AB)n . Based on the combined analyses of polymerization kinetics and NMR spectra (1 H and 19 F), the mechanism of the novel polymerization method, including the side reaction, is proposed. This novel polymerization method provides a new strategy not only for the step-growth radical polymerization of α,ω-unconjugated dienes but also for the construction of high molecular weight perfluorocarbon-containing alternating copolymers.

Metal-Free Atom Transfer Radical Polymerization of Methyl Methacrylate with ppm Level of Organic Photocatalyst.

It is well known that the recently developed photoinduced metal-free atom transfer radical polymerization (ATRP) has been considered as a promising methodology to completely eliminate transition metal residue in polymers. However, a serious problem needs to be improved, namely, large amount of organic photocatalysts should be used to keep the controllability over molecular weights and molecular weight distributions. In this work, a novel photocatalyst 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) with strong excited state reduction potential is successfully used to mediate a metal-free ATRP of methyl methacrylate just with parts per million (ppm) level usage under irradiation of blue light emitting diode at room temperature, using ethyl α-bromophenyl-acetate as a typical initiator with high initiator efficiency. The polymerization kinetic study, multiple controlled "on-off" light switching cycle regulation, and chain extension experiment confirm the "living"/controlled features of this promising photoinduced metal-free ATRP system with good molecular weight control in the presence of ppm level photocatalyst 4CzIPN.

A Facile Strategy for Catalyst Separation and Recycling Suitable for ATRP of Hydrophilic Monomers Using a Macroligand.

How to simply and efficiently separate and recycle catalyst has still been a constraint for the wide application of atom transfer radical polymerization (ATRP), especially for the polymerization systems with hydrophilic monomers because the polar functional groups may coordinate with transition metal salts, resulting in abundant catalyst residual in the resultant water-soluble polymers. In order to overcome this problem, a latent-biphasic system is developed, which can be successfully used for ATRP catalyst separation and recycling in situ for various kinds of hydrophilic monomers for the first time, such as poly(ethylene glycol) monomethyl ether methacrylate (PEGMA), 2-hydroxyethyl methacrylate (HEMA), 2-(dimethylamino)ethyl methacrylate (DMAEMA), N,N-dimethyl acrylamide (DMA), and N-isopropylacrylamide (NIPAM). Herein, random copolymer of octadecyl acrylate (OA), MA-Ln (2-(bis(pyridin-2-ylmethyl)amino)ethyl acrylate), and POA-ran-P(MA-Ln) is designed as the macroligand, and heptane/ethanol is selected as the biphasic solvent. Copper(II) bromide (CuBr2 ) is employed as the catalyst, PEG-bound 2-bromo-2-methylpropanoate (PEG350 -Br) as the water-soluble ATRP initiator and 2,2'-azobis(isobutyronitrile) (AIBN) as the azo-initiator to establish an ICAR (initiators for continuous activator regeneration) ATRP system. Importantly, well-defined water-soluble polymers are obtained even though the recyclable catalyst is used for sixth times.

Highly Efficient and Facile Photocatalytic Recycling System Suitable for ICAR ATRP of Hydrophilic Monomers.

Photoinduced initiators for continuous activator regeneration atom transfer radical polymerization (ATRP) of hydrophilic monomers in heptane/ethanol latent-biphasic system for copper catalyst separation and recycling have been realized for the first time at room temperature with different wavelengths of visible light LED (green, blue, purple, and white LED) as external stimulus, using 2-bromophenylacetate as the ATRP initiator and camphorquinone/triethylamine as the photoinitiator. In this system, hybrid catalyst complex (HCc) is synthesized as a novel nonpolar catalyst, which is preferentially dissolved in heptane. The hydrophilic polymers obtained catalyzed by HCc in heptane/ethanol mixture solvent show typical "living" features, for example, the values of Mn,GPC increase linearly with monomer conversion up to quantitative level (>96%) and the molecular weight distributions were kept narrow (Mw /Mn < 1.20) throughout the polymerization process. It should be noted that the excellent controllability of this novel polymerization system can be achieved even after 5 catalyst recycling experiments under LED irradiation.

Diselenide-Labeled Cyclic Polystyrene with Multiple Responses: Facile Synthesis, Tunable Size, and Topology.

Diselenide-containing polymers have attracted more and more attention due to their redox sensitivity and bioapplication. In this work, a bifunctional diselenocarbonate is prepared and used to mediate the reversible addition-fragmentation chain transfer (RAFT) polymerization, producing α,ω-selenocarbonate-labeled telechelic polystyrene. Based on effective aminolysis of the terminal selenocarbonates and the followed spontaneous oxidation coupling reaction of diselenols, monoblock cyclic polystyrene linked by one diselenide bond and multiblock cyclic copolymer linked by several diselenide bonds are prepared by manipulating the concentration of α,ω-telechelic polystyrene in solution. The progress of aminolysis and the subsequent spontaneous oxidation of selenols to diselenides are monitored by UV-vis, gel permeation chromatography (GPC), and NMR characterizations, confirming the cyclic topologies of the resultant polymers (monocyclic or multiblock cyclic polymer). The monoblock cyclic or multiblock polymers show redox sensitivity, which can be converted to linear polymer by reducing or oxidizing agent. Moreover, the obtained monoblock cyclic polymer or multiblock cyclic copolymer can be transformed to each other under UV irradiation by adjusting the concentration of the cyclic polystyrene. For the first time, this work provides an alternative and promising approach to realize the topological transformation of polymers by installing multiresponsive diselenide moities into the backbone of cyclic polymer.

A versatile cyclic 2,2'-azobenzenophane with a functional handle and its polymers: efficient synthesis and effect of topological structure on chiroptical properties.

Two novel cyclic azobenzenophanes (SC, RC) with functional handles have been synthesized efficiently by a Glaser coupling reaction. Through a Suzuki coupling reaction, alternating ring/linear polymers with rigid (conjugated)/flexible (unconjugated) bridges were obtained from the resultant cyclic azobenzenophanes. The optical activities of linear, cyclic, and macromolecular binaphethyl-azobenzene derivatives were investigated by UV/Vis and circular dichroism (CD) spectra and the time-dependent (TD)-DFT method. Experimental results and theoretical analyses indicated that the cyclic configurations exhibited better chiroptical features than the others, and the reverse conformation and difference of dextro-/levo-rotation of azobenzenophanes were detected by comparing linear and cyclic structures, which provides an opportunity for the optical-rotation-controlled "smart" materials systems in future.

Recent Progress on Transition Metal Catalyst Separation and Recycling in ATRP.

Atom transfer radical polymerization (ATRP) is a versatile and robust tool to synthesize a wide spectrum of monomers with various designable structures. However, it usually needs large amounts of transition metal as the catalyst to mediate the equilibrium between the dormant and propagating species. Unfortunately, the catalyst residue may contaminate or color the resultant polymers, which limits its application, especially in biomedical and electronic materials. How to efficiently and economically remove or reduce the catalyst residue from its products is a challenging and encouraging task. Herein, recent advances in catalyst separation and recycling are highlighted with a focus on (1) highly active ppm level transition metal or metal free catalyzed ATRP; (2) post-purification method; (3) various soluble, insoluble, immobilized/soluble, and reversible supported catalyst systems; and (4) liquid-liquid biphasic catalyzed systems, especially thermo-regulated catalysis systems.

Diffusion-regulated phase-transfer catalysis for atom transfer radical polymerization of methyl methacrylate in an aqueous/organic biphasic system.

A concept based on diffusion-regulated phase-transfer catalysis (DRPTC) in an aqueous-organic biphasic system with copper-mediated initiators for continuous activator regeneration is successfully developed for atom transfer radical polymerization (ICAR ATRP) (termed DRPTC-based ICAR ATRP here), using methyl methacrylate (MMA) as a model monomer, ethyl α-bromophenylacetate (EBrPA) as an initiator, and tris(2-pyridylmethyl)amine (TPMA) as a ligand. In this system, the monomer and initiating species in toluene (organic phase) and the catalyst complexes in water (aqueous phase) are simply mixed under stirring at room temperature. The trace catalyst complexes transfer into the organic phase via diffusion to trigger ICAR ATRP of MMA with ppm level catalyst content once the system is heated to the polymerization temperature (75 °C). It is found that well-defined PMMA with controlled molecular weights and narrow molecular weight distributions can be obtained easily. Furthermore, the polymerization can be conducted in the presence of limited amounts of air without using tedious degassed procedures. After cooling to room temperature, the upper organic phase is decanted and the lower aqueous phase is reused for another 10 recycling turnovers with ultra low loss of catalyst and ligand loading. At the same time, all the recycled catalyst complexes retain nearly perfect catalytic activity and controllability, indicating a facile and economical strategy for catalyst removal and recycling.

Photoresponsive Amphiphilic Macrocycles Containing Main-Chain Azobenzene Polymers.

Herein, the first example of photosensitive cyclic amphiphilic homopolymers consisting of multiple biphenyl azobenzene chromophores in the cyclic main chain tethered with hydrophilic tetraethylene glycol monomethyl ether units is presented. The synthetic approach involves sequentially performed thermal catalyzed "click" step-growth polymerization in bulk, and Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) intramolecular cyclization from α-alkyne/ω-azide linear precursors. It is observed that such amphiphilic macrocycles exhibit increased glass transition temperatures (Tg ), slightly faster trans-cis-trans photoisomerization, and enhanced fluorescence emission intensity compared with the corresponding linear polymers. In addition, the cyclic amphiphilic homopolymers self-assemble into spherical nanoparticles with smaller sizes which possess slower photoresponsive behaviors in a tetrahydrofuran/water mixture compared with those of the linear ones. All these interesting observations suggest that the cyclic topology has a great influence on the physical properties and self-assembly behavior of these photoresponsive amphiphilic macrocycles in general.

Photocatalyst-Free and Blue Light-Induced RAFT Polymerization of Vinyl Acetate at Ambient Temperature.

Vinyl acetate is polymerized in the living way under the irradiation of blue light-emitting diodes (LEDs) or sunlight without photocatalyst at ambient temperature. 2-(Ethoxycarbonothioyl)sulfanyl propanoate is exclusively added and acts as initiator and chain transfer agent simultaneously in the current system. Poly(vinyl acetate) with well-regulated molecular weight and narrow molecular weight distribution (D < 1.30) is synthesized. Near quantitative end group fidelity of polymer is demonstrated by nuclear magnetic resonance (NMR) and matrix-assisteed laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS).

Bifunctional nanoparticles with magnetism and NIR fluorescence: controlled synthesis from combination of AGET ATRP and 'click' reaction.

In this work, bifunctional nanoparticles (NPs) capable of emitting near infrared (NIR) fluorescence and generating superparamagnetism under an external magnetic field were prepared by combination of 'click' reaction and surface-initiated activators generated by electron transfer for atom transfer radical polymerization (AGET ATRP) of water-soluble poly(ethylene glycol) monomethyl ether methacrylate (PEGMA) and glycidyl methacrylate (GMA) using biocompatible iron as the catalyst on the surface of silica-coated iron oxide (Fe3O4@SiO2) NPs. The nanosized Fe3O4@SiO2@PPEGMA-co-PGMA@N3 was prepared through AGET ATRP and alkynyl bearing NIR dye was also prepared; afterwards they were integrated together by 'click' reaction. The different stages of surface modification were approved by employing different characterization techniques such as TEM, XRD, XPS, VSM and FT-IR, and the properties of the final NPs were thoroughly studied. Their suitability as dual model imaging agents for magnetic resonance (MR) and fluorescence imaging was investigated, indicating them to be a competitive candidate for imaging contrast agents.

Highly active ppm level organic copper catalyzed photo-induced ICAR ATRP of methyl methacrylate.

A novel photo-induced homogeneous atom transfer radical polymerization (ATRP) system is constructed using an organic copper salt (Cu(SC(S)N(C2 H5 )2 )2 ) as a photo-induced catalyst at 30 °C. Herein, N,N,N',N'',N''-pentamethyldiethylenetriamine (PMDETA) is used as a ligand, ethyl 2-bromophenylacetate (EBPA) as an ATRP initiator, and (2,4,6-trimethylbenzoyl) diphenylphosphine oxide (TPO) as a photo-induced radical initiator to establish an ICAR (initiators for continuous activator regeneration) ATRP using methyl methacrylate (MMA) as a modal monomer. The effect of the concentration of the organic copper on the polymerization is investigated in detail. It is found that well-controlled polymerization can be obtained even with the amount of (Cu(SC(S)N(C2 H5 )2 )2 decreasing to a 1.56 ppm level, with the molecular weight of the resultant polymers increasing linearly with monomer conversion while maintaining a narrow molecular weight distribution (M¯w/M¯n < 1.3).

Facile "living" radical polymerization of methyl methacrylate in the presence of iniferter agents: homogeneous and highly efficient catalysis from copper(II) acetate.

A facile homogeneous polymerization system involving the iniferter agent 1-cyano-1-methylethyl diethyldithiocarbamate (MANDC) and copper(II) acetate (Cu(OAc)2 ) is successfully developed in bulk using methyl methacylate (MMA) as a model monomer. The detailed polymerization kinetics with different molar ratios (e.g., [MMA]0 /[MANDC]0 /[Cu(OAc)2 ]0 = 500/1/x (x = 0.1, 0.2, 0.5, 1.0)) demonstrate that this system has the typical "living"/controlled features of "living" radical polymerization, even with ppm level catalyst Cu(OAc)2 , first order polymerization kinetics, a linear increase in molecular weight with monomer conversion and narrow molecular weight distributions for the resultant PMMA. (1) H NMR spectra and chain-extension experiments further confirm the "living" characteristics of this process. A plausible mechanism is discussed.