RESUMO
Oral squamous cell carcinoma (OSCC) is one of the top 15 most prevalent cancers worldwide. However, the current treatment models for OSCC (e.g., surgery, chemotherapy, radiotherapy, and combination therapy) present several limitations: damage to adjacent healthy tissue, possible recurrence, low efficiency, and severe side effects. In this context, nanomaterial-based photothermal therapy (PTT) has attracted extensive research attention. This paper reviews the latest progress in the application of biological nanomaterials for PTT in OSCC. We divide photothermal nanomaterials into four categories (noble metal nanomaterials, carbon-based nanomaterials, metal compounds, and organic nanomaterials) and introduce each category in detail. We also mention in detail the drug delivery systems for PTT of OSCC and briefly summarize the applications of hydrogels, liposomes, and micelles. Finally, we note the challenges faced by the clinical application of PTT nanomaterials and the possibility of further improvement, providing direction for the future research of PTT in OSCC treatment.
Assuntos
Carcinoma de Células Escamosas , Neoplasias de Cabeça e Pescoço , Neoplasias Bucais , Nanoestruturas , Neoplasias , Carbono , Carcinoma de Células Escamosas/terapia , Neoplasias de Cabeça e Pescoço/terapia , Humanos , Hidrogéis , Lipossomos , Micelas , Neoplasias Bucais/terapia , Nanoestruturas/uso terapêutico , Neoplasias/terapia , Terapia Fototérmica , Carcinoma de Células Escamosas de Cabeça e Pescoço/terapiaRESUMO
BACKGROUND: Orthodontic tooth movement (OTM) in a region containing alveolar bone defects with insufficient height and width is hard to achieve. Bovine bone mineral (Bio-Oss) is available to restore the alveolar defect; however, whether the region augmented with a bovine bone mineral graft (BG) is feasible for OTM, and the mechanisms by which macrophages remodel the BG material, is uncertain under the mechanical force induced by OTM. MATERIAL AND METHODS: Rats were divided into three groups: OTM (O), OTM + BG material (O + B), and Control (C). First molars were extracted to create bone defects in the O and O + B groups with bovine bone mineral grafting in the latter. Second molars received OTM towards the bone defects in both groups. After 28 days, maxillae were analyzed using microfocus-computed tomography (µCT) and scanning-electron-microscopy (SEM); and macrophages (M1/M2) were stained using immunofluorescence. THP-1 cell-induced macrophages were cultured under mechanical force (F), BG material (B), or both (F + B). Phagocytosis-related signaling molecules (cAMP/PKA/RAC1) were analyzed, and conditioned media was analyzed for MMP-9 and cytokines (IL-1ß, IL-4). RESULTS: Our study demonstrated that alveolar defects grafted with BG materials are feasible for OTM, with significantly increased OTM distance, bone volume, and trabecular thickness in this region. SEM observation revealed that the grafts served as a scaffold for cells to migrate and remodel the BG materials in the defect during OTM. Moreover, the population of M2 macrophages increased markedly both in vivo and in cell culture, with enhanced phagocytosis via the cAMP/PKA/RAC1 pathway in response to mechanical force in combination with BG particles. By contrast, M1 macrophage populations were decreased under the same circumstances. In addition, M2 macrophage polarization was also indicated by elevated IL-4 levels, reduced IL-1ß levels, and less active MMP-9 in cell culture. CONCLUSION: This study explored the mechanisms of mechanical force-induced alveolar bone remodeling with bovine bone mineral grafts during OTM. The results might provide molecular insights into the related clinical problems of whether we can move teeth into the grafted materials; and how these materials become biologically remodeled and degraded under mechanical force.
Assuntos
Interleucina-4 , Metaloproteinase 9 da Matriz , Animais , Bovinos , Ratos , Técnicas de Movimentação Dentária , MineraisRESUMO
Background/purpose: Aging severely impairs the beneficial effects of human dental pulp stem cells (hDPSCs) on cartilage regeneration. Lysine demethylase 3A (KDM3A) is involved in regulating mesenchymal stem cells (MSCs) senescence and bone aging. In this study, we investigated the role of KDM3A in hDPSCs aging and whether KDM3A could rejuvenate aged hDPSCs to enhance their chondrogenic differentiation capacity. Materials and methods: The cellular aging of hDPSCs was evaluated by senescence-associated ß-galactosidase (SA-ß-gal) staining. Protein levels were determined using Western blot analysis. KDM3A was overexpressed in aged hDPSCs by lentivirus infection. Quantitative reverse-transcription polymerase chain reaction (RT-qPCR) were used to determine the mRNA levels of stemness markers. Toluidine blue staining was used to evaluate the effect of KDM3A overexpression on the chondrogenic differentiation of aged hDPSCs. Results: hDPSCs at passage 12 or treated with etoposide exhibited augmented cellular senescence as evidenced by increased SA-ß-gal activity. KDM3A was significantly increased during senescence of hDPSCs. Overexpression of KDM3A did not affect the stemness properties but significantly promoted the chondrogenic differentiation of aged hDPSCs. Conclusion: Our findings indicate that KDM3A plays an important role in the maintenance of the chondrogenic differentiation capacity of aged hDPSCs and suggest that therapies targeting KDM3A may be a novel strategy to rejuvenate aged hDPSCs.
RESUMO
Aim of this comparative cross-sectional study was to evaluate the effect of anterior teeth retraction and related hard and soft tissue change under physiologic anchorage control in patients with chief complain of protrusive teeth. 68 Class I or II orthodontic patients undergoing four-premolar extraction and requiring maximum or medium anchorage were included. Patients were treated with physiologic anchorage control technique (PASS group, n = 34, 18.6 ± 7.7 years, 10 male and 24 female) and self-ligation technique (Damon group, n = 34, 17.5 ± 5.4 years, 13 male and 21 female), respectively. TADs were used for anchorage reinforcement in Damon group. Pre- and post-treatment cephalograms were collected. Twenty-six skeletal, dental and soft tissue items were measured and analyzed using a blinded method. T test and paired rank-sum test were used for statistical analysis. The baseline characteristics were similar between groups (P > 0.05). After treatment, inter-group comparison showed statistically significant differences in the decrease of skeletal measurements â ANB (- 0.73 ± 1.05° in PASS group and - 0.25 ± 0.84° in the Damon group), Wits value (- 2.56 ± 2.29 mm in PASS group and - 0.47 ± 2.15 mm in Damon group) and soft tissue measurement UL-E (- 2.75 ± 1.36 mm in PASS group and - 2.03 ± 1.30 mm in Damon group) and the increase of FCA and Z angle, which was 2.03 ± 2.12°and 9.52 ± 4.78°in PASS group and 0.97 ± 2.12°and 6.96 ± 4.43°in Damon group, respectively (P < 0.05). Our results indicated that significant anterior teeth retraction and profile improvement could be achieved with PASS technique without additional anchorage devices. Appropriate application of physiologic anchorage control could reduce the dependence of TADs for anterior teeth retraction.
Assuntos
Procedimentos de Ancoragem Ortodôntica , Técnicas de Movimentação Dentária , Humanos , Masculino , Feminino , Técnicas de Movimentação Dentária/métodos , Estudos Transversais , Maxila , CefalometriaRESUMO
OBJECTIVES: This study aimed to investigate vertical changes in the maxillary central incisor and the maxillary first molar, along with alterations in the mandibular plane angle during space closure using miniscrew sliding mechanics. METHODS: Twenty adult patients treated at Peking University Hospital of Stomatology between 2008 and 2013 were included. Digital dental models and craniofacial cone-beam computed tomography (CBCT) scans were obtained at the start of treatment (T0) and immediately after space closure (T1). Stable miniscrews were used for superimposing maxillary digital dental models (T0 and T1), and vertical changes in the maxillary first molar and the maxillary central incisor were measured. Three-dimensional changes in the mandibular plane were assessed through CBCT superimposition. RESULTS: The maxillary central incisor exhibited an average extrusion of 2.56 ± 0.18 mm, while the maxillary first molar showed an average intrusion of 1.25 ± 1.11 mm with a distal movement of 0.97 ± 0.99 mm. Additionally, the mandibular plane angle decreased by an average of 0.83 ± 1.65°. All three indices exhibited statistically significant differences. CONCLUSION: During space closure using the miniscrew sliding technique, significant changes occurred in both the sagittal and vertical dimensions of the upper dentition. This included extrusion of the maxillary central incisors, intrusion of the maxillary first molars, and a slight counterclockwise rotation of the mandibular plane.
Assuntos
Procedimentos de Ancoragem Ortodôntica , Técnicas de Movimentação Dentária , Adulto , Humanos , Técnicas de Movimentação Dentária/métodos , Mandíbula/diagnóstico por imagem , Incisivo/diagnóstico por imagem , Dente Molar/diagnóstico por imagem , Maxila/diagnóstico por imagem , Maxila/cirurgia , Cefalometria/métodos , Procedimentos de Ancoragem Ortodôntica/métodosRESUMO
Dental pulp stem cells (DPSCs), characterized by easy availability, multi-lineage differentiation ability, and high proliferation ability, are ideal seed cells for cartilage tissue engineering. However, the epigenetic mechanism underlying chondrogenesis in DPSCs remains elusive. Herein, it is demonstrated that KDM3A and G9A, an antagonistic pair of histone-modifying enzymes, bidirectionally regulate the chondrogenic differentiation of DPSCs by controlling SOX9 (sex-determining region Y-type high-mobility group box protein 9) degradation through lysine methylation. Transcriptomics analysis reveals that KDM3A is significantly upregulated during the chondrogenic differentiation of DPSCs. In vitro and in vivo functional analyses further indicate that KDM3A promotes chondrogenesis in DPSCs by boosting the SOX9 protein level, while G9A hinders the chondrogenic differentiation of DPSCs by reducing the SOX9 protein level. Furthermore, mechanistic studies indicate that KDM3A attenuates the ubiquitination of SOX9 by demethylating lysine (K) 68 residue, which in turn enhances SOX9 stability. Reciprocally, G9A facilitates SOX9 degradation by methylating K68 residue to increase the ubiquitination of SOX9. Meanwhile, BIX-01294 as a highly specific G9A inhibitor significantly induces the chondrogenic differentiation of DPSCs. These findings provide a theoretical basis to ameliorate the clinical use of DPSCs in cartilage tissue-engineering therapies.
Assuntos
Condrogênese , Lisina , Lisina/metabolismo , Condrogênese/fisiologia , Metilação , Polpa Dentária/metabolismo , Células Cultivadas , Células-Tronco/metabolismo , Diferenciação Celular/genéticaRESUMO
Aiming at shortage of metal materials, ceramic is increasingly applied in biomedicine due to its high strength, pleasing esthetics and good biocompatibility, especially for dental restorations and implants, artificial joints, as well as synthetic bone substitutes. However, the inherent brittleness of ceramic could lead to serious complications, such as fracture and disfunction of biomedical devices, which impede their clinical applications. Herein, several toughening strategies have been summarized in this review, including reinforcing phase addition, surface modification, and manufacturing processes improvement. Doping metal and/or non-metal reinforcing fillers modifies toughness of bulk ceramic, while surface modifications, mainly coating, chemical and thermal methods, regulate toughness on the surface layer. During fabrication, optimization should be practiced in powder preparation, green forming and densification processes. Various toughening strategies utilize mechanisms involving fine-grained, stress-induced phase transformation, and microcrack toughening, as well as crack deflection, bifurcation, bridging and pull-out. This review hopes to shed light on systematic combination of different toughening strategies and mechanisms to drive progress in biomedical devices.
RESUMO
Liver cirrhosis represents a type of end-stage liver disease with few effective therapies, which was characterized by damaged functional liver tissue due to long-term inflammation. Gasdermin D (GSDMD)-executed programmed necrosis is reported to be involved in inflammation. However, the role of GSDMD in liver cirrhosis remains unclear. In this study, we used a CCl4-induced cirrhosis model and found stem cells from human exfoliated deciduous teeth (SHED) infusion showed profound therapeutic effects for liver cirrhosis. Mechanistically, NLRP3 inflammasome-activated GSDMD and its pyroptosis were upregulated in liver cirrhosis, while SHED infusion could suppress the expression of GSDMD and Caspase-1, resulting in reduced hepatocyte pyroptosis and inflammatory cytokine IL-1ß release. Consistently, SHED could inhibit the elevated expression of NLRP3, GSDMD and Caspase-1 induced by CCl4 treatment in vitro co-culture system, which was mediated by decreasing reactive oxygen species (ROS) generation. Moreover, the pyroptosis inhibitor disulfiram showed similar therapeutic effects for liver cirrhosis as SHED. In conclusion, SHED alleviates CCl4-induced liver cirrhosis via inhibition of hepatocytes pyroptosis. Our findings could provide a potential treatment strategy and novel target for liver cirrhosis.
Assuntos
Proteína 3 que Contém Domínio de Pirina da Família NLR , Piroptose , Caspase 1/metabolismo , Hepatócitos/metabolismo , Humanos , Inflamação , Peptídeos e Proteínas de Sinalização Intracelular/metabolismo , Cirrose Hepática/induzido quimicamente , Cirrose Hepática/terapia , Proteína 3 que Contém Domínio de Pirina da Família NLR/metabolismo , Proteínas de Ligação a Fosfato/metabolismo , Células-Tronco/metabolismo , Dente DecíduoRESUMO
Repairing tooth defects with dental resin composites is currently the most commonly used method due to their tooth-colored esthetics and photocuring properties. However, the higher than desirable failure rate and moderate service life are the biggest challenges the composites currently face. Secondary caries is one of the most common reasons leading to repair failure. Therefore, many attempts have been carried out on the development of a new generation of antimicrobial and therapeutic dental polymer composite materials to inhibit dental caries and prolong the lifespan of restorations. These new antimicrobial materials can inhibit the formation of biofilms, reduce acid production from bacteria and the occurrence of secondary caries. These results are encouraging and open the doors to future clinical studies on the therapeutic value of antimicrobial dental resin-based restoratives. However, antimicrobial resins still face challenges such as biocompatibility, drug resistance and uncontrolled release of antimicrobial agents. In the future, we should focus on the development of more efficient, durable and smart antimicrobial dental resins. This article focuses on the most recent 5 years of research, reviews the current antimicrobial strategies of composite resins, and introduces representative antimicrobial agents and their antimicrobial mechanisms.