Controlled Synthesis, Chiral Assembly, and Circularly Polarized Luminescence of Poly(Phenyl Isocyanide)-Block-Polyfluorene Copolymers.

In this work, π-conjugated block copolymers consisting of poly(phenyl isocyanide) (PPI) and polyfluorene (PF) segments are facilely prepared by one-pot sequential polymerization of phenyl isocyanide (monomer 1) and 7-bromo-9,9-dioctylfluorene-2-boronic acid pinacol ester (monomer 2). The Pd(II)-terminated PPI is first prepared via polymerizing monomer 1 catalyzed with phenyl alkyne-Pd(II) complex and then utilized to initiate the controlled Suzuki cross-coupling polymerization of monomer 2, yielding various PPI-b-PF copolymers possessing controlled molar mass and narrow dispersity. Owing to the helical conformation of PPI segment and π-conjugated structure of PF segment, PPI-b-PF copolymers present distinctive optical property and fascinating chiral self-assembly behavior. During the self-assembly process, chirality transfer from helical PPI block to the supramolecular aggregates of helical nanofibers occurs to afford optically active helical nanofibers with high optical activity. Furthermore, the self-assembled helical nanofibers exhibit excellent circularly polarized luminescence performance.

Polystyrene nanoplastics aggravate reproductive system damage in obese male mice by perturbation of the testis redox homeostasis.

The potential impact of the combination of a high-fat diet (HFD) and polystyrene nanoplastics (PS-NPs) on fertility cannot be ignored, especially when the fertility rate is declining. However, it has not attracted considerable attention. In this study, an obese mouse model was established using an HFD, and the reproductive function of male mice was evaluated after intragastric administration of 100 µL of a 10 mg/mL PS-NP suspension for 4 weeks. By determining the morphology and vitality of sperm and related indicators of testosterone production, it was found that PS-NPs aggravated the destruction of sperm mitochondrial structure, decrease sperm activity, and testosterone production in HFD-fed mice. To comprehensively analyze the injury mechanism, the integrity of the blood testicular barrier (BTB) and the function of Leydig and Sertoli cells were further analyzed. It was found that PS-NPs could destroy BTB, promote the degeneration of Leydig cells, reduce the number of Sertoli cells, and decrease lactate secretion in HFD-fed mice. PS-NPs further interfered with redox homeostasis in the testicular tissues of HFD-fed mice. This study found that PS-NPs could aggravate the damage to the reproductive system of obese male mice by further perturbing its redox homeostasis and revealed the potential health risk of PS-NPs exposure under an HFD.

Polystyrene exacerbates cadmium-induced mitochondrial damage to lung by blocking autophagy in mice.

Cadmium (Cd) is an environmental heavy metal, and its accumulation is harmful to animal and human health. The cytotoxicity of Cd includes oxidative stress, apoptosis, and mitochondrial histopathological changes. Furthermore, polystyrene (PS) is a kind of microplastic piece derived from biotic and abiotic weathering courses, and has toxicity in various aspects. However, the potential mechanism of action of Cd co-treated with PS is still poorly unclear. The objective of this study was to investigate the effects of PS on Cd-induced histopathological injury of mitochondria in the lung of mice. In this study, the results have showed that Cd could induce the activity of oxidative enzymes of the lung cells in mice, increasing the content of partial microelement and the phosphorylation of inflammatory factor NF-κB p65. Cd further destroys the integrity of mitochondria by increasing the expression of apoptotic protein and blocking the autophagy. In addition, PS solely group aggravated the lung damage in mice, especially mitochondrial toxicity, and played a synergistic effect with Cd in lung injury. However, how PS can augment mitochondrial damage and synergism with Cd in lung of mice requiring further exploration. Therefore, PS was able to exacerbate Cd-induced mitochondrial damage to the lung in mice by blocking autophagy, and was associated with the apoptosis.

Polystyrene Microplastics Induce Oxidative Stress in Mouse Hepatocytes in Relation to Their Size.

Microplastics have become a new type of environmental pollutant that can accumulate in various tissues and organs of the body and cause chronic damage. In this study, two different size polystyrene microplastics (PS-MPs, 5 µm and 0.5 µm) exposure models were established in mice to investigate the effects of PS-MPs with different particle sizes on oxidative stress in the liver. The results showed that PS-MPs exposure caused a decrease in body weight and liver-to-body weight. The hematoxylin and eosin staining and transmission electron microscopy results showed that exposure to PS-MPs led to the disorganized cellular structure of liver tissue, nuclear crinkling, and mitochondrial vacuolation. The extent of damage in the 5 µm PS-MP exposure group was more extensive when compared with the other group. The evaluation of oxidative-stress-related indicators showed that PS-MPs exposure exacerbated oxidative stress in hepatocytes, especially in the 5 µm PS-MPs group. The expression of oxidative-stress-related proteins sirtuin 3(SIRT3) and superoxide dismutase (SOD2) was significantly reduced, and the reduction was more pronounced in the 5 µm PS-MPs group. In conclusion, PS-MPs exposure led to oxidative stress in mouse hepatocytes and caused more severe damage in the 5 µm PS-MPs group when compared with the 0.5 µm PS-MPs group.

Inducing enantioselective crystallization with and self-assembly of star-shaped hybrid polymers prepared via "grafting to" strategy.

Helical polymers present some interesting and distinctive properties, and one of the most distinguished applications of them is the chiral recognition and resolution of enantiomers. In this work, star-shaped hybrid helical poly (phenyl isocyanide) (PPI) with polyhedral oligomeric silsesquioxanes (POSS) as the core was designed and synthesized by "grafting to" strategy. The homoarm star-shaped hybrid POSS-(PPI)8 was first obtained by the click reaction between azide-modified POSS (POSS-(N3 )8 ) and alkynyl-modified PPI (PPI-Alkynyl). The hybrid POSS-(PPI)8 was with predominated left-handed helical conformation and exhibited excellent ability in the enantioselective crystallization of racemic compounds. In the meantime, heteroarm star-shaped hybrid (PEG)4 -POSS-(PPI)4 was prepared by the click reaction of POSS-(N3 )8 with PPI-Alkynyl and alkynyl-modified poly (ethylene glycol) (PEG-Alkynyl). The hybrid (PEG)4 -POSS-(PPI)4 was amphiphilic, and it could self-assemble to form spherical micelles in aqueous solutions.

Microplastics Exacerbate Cadmium-Induced Kidney Injury by Enhancing Oxidative Stress, Autophagy, Apoptosis, and Fibrosis.

Cadmium (Cd) is a potential pathogenic factor in the urinary system that is associated with various kidney diseases. Microplastics (MPs), comprising of plastic particles less than 5 mm in diameter, are a major carrier of contaminants. We applied 10 mg/L particle 5 µm MPs and 50 mg/L CdCl2 in water for three months in vivo assay to assess the damaging effects of MPs and Cd exposure on the kidney. In vivo tests showed that MPs exacerbated Cd-induced kidney injury. In addition, the involvement of oxidative stress, autophagy, apoptosis, and fibrosis in the damaging effects of MPs and Cd on mouse kidneys were investigated. The results showed that MPs aggravated Cd-induced kidney injury by enhancing oxidative stress, autophagy, apoptosis, and fibrosis. These findings provide new insights into the toxic effects of MPs on the mouse kidney.

Enzymatic photoelectrochemical bioassay based on hierarchical CdS/NiO heterojunction for glucose determination.

The design and development of a 3D hierarchical CdS/NiO heterojunction and its application in a self-powered cathodic photoelectrochemical (PEC) bioanalysis is introduced. Specifically, NiO nanoflakes (NFs) were in situ formed on carbon fibers via a facile liquid-phase deposition method followed by an annealing step and subsequent integration with CdS quantum dots (QDs). The glucose oxidase (GOx) was then coated on the photocathode to allow the determination of glucose. Under 5 W 410 nm LED light and at a working voltage of 0.0 V (vs. Ag/AgCl), this method can assay glucose concentrations down to 1.77×10-9 M. The linear range was 5×10-7 M to 1×10-3 M, and the relative standard deviation (RSD) was below 5%. The photocathodic biosensor achieved target detection with high sensitivity and selectivity. This work is expected to stimulate more passion in the development of innovative hierarchical heterostructures for advanced self-powered photocathodic bioanalysis. Design of 3D hierarchical CdS/NiO heterojunction and its application in a self-powered cathodic photoelectrochemical (PEC) bioanalysis.

Ferroptosis: First evidence in premature duck ovary induced by polyvinyl chloride microplastics.

Ferroptosis is frequently observed in fibrosis and diseases related to iron metabolism disorders in various mammalian organs. However, research regarding the damage mechanism of ferroptosis in the female reproductive system of avian species remains unclear. In this study, Muscovy female ducks were divided into three groups which were given purified water, 1 mg/L polyvinyl chloride microplastics (PVC-MPs) and 10 mg/L PVC-MPs for two months respectively, to investigate the ferroptosis induced by PVC-MPs caused ovarian tissue fibrosis that lead to premature ovarian failure. The results showed that the high accumulation of PVC-MPs in ovarian tissue affected the morphology and functional activity of ovarian granulosa cells (GCs) and subsequently caused the follicular development disorders and down-regulated the immunosignaling of ovarian steroidogenesis proteins 3ß-hydroxysteroid dehydrogenase (3ß-HSD), 17ß-hydroxysteroid dehydrogenase (17ß-HSD), CYP11A1 cytochrome (P450-11A1) and CYP17A1 cytochrome (P450-17A1) suggested impaired ovarian function. In addition, PVC-MPs significantly up-regulated positive expression of collagen fibers, significantly increased lipid peroxidation and malondialdehyde (MDA) level, along with encouraged overload of iron contents in the ovarian tissue were the characteristics of ferroptosis. Further, immunohistochemistry results confirmed that immunosignaling of ferroptosis related proteins Acyl-CoA synthetase (ACSL4), Cyclooxygenase 2 (COX2) and ferritin heavy chain 1 (FTH1) were significantly increased, but solute carrier family 7 member 11 (SLC7A11) and glutathione peroxidase (GPX4) were decreased by PVC-MPs in the ovarian tissue. In conclusion, our study demonstrates that PVC-MPs induced ferroptosis in the ovarian GCs, leading to follicle development disorders and ovarian tissue fibrosis, and ultimately contributing to various female reproductive disorders through regulating the proteins expression of ferroptosis.

A critical review on male-female reproductive and developmental toxicity induced by micro-plastics and nano-plastics through different signaling pathways.

It is widely accepted that humans are constantly exposed to micro-plastics and nano-plastics through various routes, including inhalation of airborne particles, exposure to dust, and consumption of food and water. It is estimated that humans may consume thousand to millions of micro-plastic particles, equating to several milligrams per day. Prolonged exposure to micro-plastics and nano-plastics has been linked to negative effects on different living organisms, including neurotoxicity, gastrointestinal toxicity, nephrotoxicity, and hepatotoxicity, and developmental toxicities. The main purpose of this review is to explore the effect of micro-plastics and nano-plastics on the male and female reproductive system, as well as their offspring, and the associated mechanism implicated in the reproductive and developmental toxicities. Micro-plastics and nano-plastics have been shown to exert negative effects on the reproductive system of both male and female mammals and aquatic animals, including developmental impacts on gonads, gametes, embryo, and their subsequent generation. In addition, micro-plastics and nano-plastics impact the hypothalamic-pituitary axes, leading to oxidative stress, reproductive toxicity, neurotoxicity, cytotoxicity, developmental abnormalities, poor sperm quality, diminishes ovarian ovulation and immune toxicity. This study discusses the so many different signaling pathways associated in the male and female reproductive and developmental toxicity induced by micro-plastics and nano-plastics.

Co-exposure to PVC microplastics and cadmium induces oxidative stress and fibrosis in duck pancreas.

PVC microplastics (PVC-MPs) are environmental pollutants that interact with cadmium (Cd) to exert various biological effects. Ducks belong to the waterfowl family of birds and therefore are at a higher risk of exposure to PVC-MPs and Cd than other animals. However, the effects of co-exposure of ducks to Cd and PVC-MPs are poorly understood. Here, we used Muscovy ducks to establish an in vivo model to explore the effects of co-exposure to 1 mg/L PVC-MPs and 50 mg/kg Cd on duck pancreas. After 2 months of treatment with 50 mg/kg Cd, pancreas weight decreased by 21 %, and the content of amylase and lipase increased by 25 % and 233 %. However, exposure to PVC-MPs did not significantly affect the pancreas. Moreover, co-exposure to PVC-MPs and Cd worsened the reduction of pancreas weight and disruption of pancreas function compared to exposure to either substance alone. Furthermore, our research has revealed that exposure to PVC-MPs or Cd disrupted mitochondrial structure, reduced ATP levels by 10 % and 18 %, inhibited antioxidant enzyme activity, and increased malondialdehyde levels by 153.8 % and 232.5 %. It was found that exposure to either PVC-MPs or Cd can induce inflammation and fibrosis in the duck pancreas. Notably, co-exposure to PVC-MPs and Cd exacerbated inflammation and fibrosis, with the content of IL-1, IL-6, and TNF-α increasing by 169 %, 199 %, and 98 %, compared to Cd exposure alone. The study emphasizes the significance of comprehending the potential hazards linked to exposure to these substances. In conclusion, it presents promising preliminary evidence that PVC-MPs accumulate in duck pancreas, and increase the accumulation of Cd. Co-exposure to PVC-MPs and Cd disrupts the structure and function of mitochondria and promotes the development of pancreas inflammation and fibrosis.

Mitigation of protein fouling by magnesium ions and the related mechanisms in ultrafiltration process.

Although protein is an important membrane foulant in the water body that may be significantly affected by the coexisting common cation magnesium (Mg2+), the effect of Mg2+ on protein fouling is rarely reported. In this context, this study selected bovine serum albumin (BSA) as the model foulant, and investigated its fouling characteristics at different Mg2+ concentrations (0-100 mM). Filtration tests showed that the protein fouling can be significantly mitigated by adding Mg2+, and the specific filtration resistance (SFR) of pure BSA (3.56 × 1014 m kg-1) was at least 5 times that of BSA-Mg2+ solutions (0.5-100 mM). In addition, an optimal Mg2+ concentration exists, which can achieve the lowest BSA SFR. A series of characterizations indicated that the main contributors to the differences in BSA SFR were the changes in BSA adhesion capacity and the thickness and structure of the foulant layer. Basically, the above results were attributed to the hydration repulsion effect of Mg2+, which prevented tight adhesion of foulants to the membrane. Moreover, the lowest BSR SFR at 1 mM Mg2+ was achieved not only by the hydration repulsion effect but also by the particle size compression due to the conformational change of BSA molecules. This combined effect led to the lowest foulant retention on the membrane surface and delivered to the lowest SFR. This study conducts a thorough inspection into the specific effect of Mg2+ on protein fouling and provides a fresh insight into protein fouling control in the UF process.

Co-exposure to cadmium and microplastics promotes liver fibrosis through the hemichannels -ATP-P2X7 pathway.

Microplastics (MPs) and cadmium (Cd) are important environmental pollutants, that damage the liver. However, the effect and mechanism of combined Cd and MPs exposure on liver fibrosis are still largely unknown. In this study investigated, Cd + MPs exposure increased superoxide anion production and promoted extracellular ATP release compared with exposure to Cd or MPs individually. Cd + MPs increased inflammatory cell infiltration, activated the P2X7-NLRP3 signaling pathway, and promoted inflammatory factor release. Cd + MPs aggravated Cd- or MPs-induced liver fibrosis and induced liver inflammation. In AML12/HSC-T6 cell in vitro poisoning model, exposure of AML12 cells to Cd + MPs increased the opening of connexin hemichannels and promoted extracellular ATP release. Treatment of HSC-T6 cells with the supernatant of AML12 cells exposed to Cd + MPs significantly promoted HSC-T6 cell activation. Treatment of HSC-T6 cells with different concentrations of ATP produced similar results. TAT-Gap19TFA, an inhibitor of connexin hemichannels, significantly inhibited the ATP release and activation of Cd + MPs-treated HSC-T6 cells. Finally, the expression of the ATP receptor P2X7 was silenced in HSC-T6 cells, which significantly inhibited their activation. In conclusion, exposure to Cd + MPs promoted liver fibrosis through the ATP-P2X7 pathway and synergistically affected liver inflammation and fibrosis.

Anesthesia for mandibular yolk sac tumor in children after radiotherapy and chemotherapy: A case report.

Yolk sac tumor (YST), also known as endodermal sinus tumor, is a malignant germ cell tumor that usually affects children aged >3 years. It is commonly observed in the gonadal sites (testis or ovary) but is extremely rare in the mandibular regions. This study describes the anesthesia process for spontaneous ventilation bronchoscope intubation in the rare case of a 7-year-old child with extragonadal primary YST of the face, refractory to radiotherapy, and chemotherapy.

[Comparison of positive and negative pressure extubation after mechanical ventilation in intensive care unit patients].

OBJECTIVE: To investigate the effect of positive and negative pressure extubation on mechanical ventilation patients in the intensive care unit (ICU). METHODS: A prospective randomized controlled study was performed, 105 ICU patients who successfully passed the spontaneous breathing test (SBT) after mechanical ventilation of Nanjing Jiangbei Hospital Affiliated to Nantong University from January 2019 to March 2021 were enrolled. According to random number table method, they were randomly divided into positive pressure extubation group (53 cases) and negative pressure extubation group (52 cases). During extubation, all patients were placed in semi-decubitus position (raising the head of bed at an angle range from 30 degree angle- 45 degree angle), the secretions from mouth, nose, throat and trachea were removed. In the negative pressure extubation group, the sputum suction tube was inserted into the tracheal tube and passed over the distal opening to carry out continuous negative pressure suction in the tracheal tube after disconnecting the ventilator. Meanwhile, after the tracheal tube balloon was evacuated, the sputum suction tube was pulled out together with the tracheal tube. In the positive pressure extubation group, the patients were guided to inspiratory forcibly under the original SBT mode. When the patients reached the inspiratory peak, the ballon was evacuated and the tracheal tube was removed. After extubation, all patients were given nasal catheter oxygen inhalation (oxygen flow 5 L/min). Arterial blood gas analysis indexes [pH value, arterial partial pressure of oxygen (PaO2) and arterial partial pressure of carbon dioxide (PaCO2)] were recorded 5 minutes and 1 hour after extubation in both groups. Vital signs (including tachypnea, tachycardia, elevated blood pressure and decreased oxygen saturation) and complications (including severe cough, airway hyperresponsiveness and pneumonia) were observed 30 minutes after extubation in both groups. RESULTS: Five minutes after extubation, blood gas analysis showed that the PaO2 of positive pressure extubation group was significantly higher than that of negative pressure extubation group [mmHg (1 mmHg ≈ 0.133 kPa): 123.4±30.2 vs. 111.0±21.1, P < 0.05], the pH value and PaCO2 in positive pressure extubation group were slightly lower than that of negative pressure extubation group [pH value: 7.411±0.042 vs. 7.419±0.040, PaCO2 (mmHg): 39.7±4.7 vs. 40.5±5.6], but the differences were not statistically significant (both P > 0.05). One hour after extubation, the pH value, PaO2 and PaCO2 in positive pressure extubation group were slightly lower than those in negative pressure extubation group, but the differences were not statistically significant. Within 30 minutes after extubation, the incedences of tachypnea, tachycardia, elevated blood pressure and oxygen desaturationin in positive pressure extubation group were significantly lower than those in negative pressure extubation group [tachypnea: 9.4% (5/53) vs. 28.8% (15/52), tachycardia: 15.1% (8/53) vs. 32.7% (17/52), elevated blood pressure: 11.3% (6/53) vs. 30.8% (16/52), oxygen desaturation: 7.5% (4/53) vs. 34.6% (18/52), all P < 0.05], the incidence of severe cough in positive pressure extubation group was significantly lower than that in negative pressure extubation group [9.4% (5/53) vs. 30.8% (16/52), P < 0.05], but there was no significant difference in the incidence of complications of airway hyperresponsiveness between the two groups [1.9% (1/53) vs. 5.8% (3/52), P > 0.05]. No pneumonia occurred in both groups within 48 hours after extubation. CONCLUSIONS: The positive pressure extubation method can ensure full oxygenation of patients undergoing mechanical ventilation in ICU, avoid hypoxia, and reduce the occurrence of hypoxia and severe cough, which is more conducive to the stability of vital signs.

Bottlebrush Polymers Based on RAFT and the "C1" Polymerization Method: Controlled Synthesis and Application in Anticancer Drug Delivery.

In this work, we reported a strategy to synthesize well-defined bottlebrush polymers. Diazoacetate macromonomers of polystyrene (1-PSn) with controlled molecular weights were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. The diazo can tolerate the RAFT polymerization conditions and remained on the chain end of the yielded PS macromonomer. The terminal diazo groups of the macromonomer were polymerized by the allyl PdCl/L catalyst to afford well-defined bottlebrush polymers ((1-PSn)ms) carrying a side chain on each backbone atom. Meanwhile, an amphiphilic bottlebrush polymer containing brush-shaped PS and polyethylene glycol (PEG) was synthesized by polymerization of the diazoacetate macromonomer of PEG (2-PEG) using Pd(II)-terminated (1-PSn)m as the macroinitiator. The yielded amphiphilic (1-PS30)50-b-(2-PEG)100 could self assemble into a well-defined core-shell micelle in aqueous solutions. The hydrodynamic diameter of the micelle was ca. 146 nm and had good biocompatibility. These results indicate the micelles have great potential in drug delivery.

Molecular-level insights into the mitigation of magnesium-natural organic matter induced ultrafiltration membrane fouling by high-dose calcium based on DFT calculation.

While magnesium cation (Mg2+) universally coexists with natural organic matter (NOM) in the water environment, influence of Mg2+ on NOM fouling in membrane filtration process is still unclear. This work was therefore performed to investigate effects of Mg2+ on NOM (sodium alginate (SA) as a model substance) fouling and role of Ca2+ in mitigating fouling from Mg2+ in the ultrafiltration (UF) water treatment process. Filtration tests showed two interesting fouling phenomena: (1) membrane fouling caused by combination of Mg2+ and SA maintained at a high value with the increased Mg2+ concentration; (2) the high fouling property of Mg2+ can be significantly improved by the prominent addition of calcium cation (Ca2+). It was found that changes of foulant morphology played essential roles through thermodynamic mechanisms represented by the Flory-Huggins lattice theory. Density functional theory (DFT) calculation showed that the combination of SA and Mg2+ tends to coordinate two terminal carboxyl groups in SA, beneficial to stretching alginate chains and forming a stable gel network at low doses. In addition, intramolecular coordination is difficult to occur between SA and Mg2+ due to the high hydration repulsion radius of Mg2+. Therefore, a dense and thick gel network remained even under high Mg2+concentration. Furthermore, due to the higher binding affinity of Ca2+ over Mg2+, high doses of Ca2+ trigger a transition of the stable SA-Mg2+ gel network to other configurations where flocculation and aggregation occur, thereby reducing the specific filtration resistance. The proposed thermodynamic mechanism satisfactorily explained the above interesting fouling behaviors, facilitating to development of new solutions to control membrane fouling.

Synthesis of Optically Active Helical Polycarbenes through Helix-Sense-Selective Polymerization Strategy and Their Application in Chiral Separation.

In this work, helical polycarbenes with optical activity were designed and facilely synthesized through the helix-sense-selective polymerization (HSSP) of the diazoacetate monomer with a dimethylbenzyl ester pendant catalyzed by π-allylPdCl with chiral phosphine ligands at room temperature. The polymerization was carried out in a living and controlled style, and a range of helical polycarbenes with the desired number-average molecular weights and narrow molecular weight distributions were obtained. Circular dichroism and UV-vis analyses revealed that these polycarbenes exhibited a stable helical conformation with a preferred handedness, and their helical directions were dependent on the chirality of the chiral phosphine ligands. Further studies showed that the helical conformation of the obtained polycarbenes was from the polymeric backbone rather than the intermolecular aggregation in the solutions. Moreover, the prepared, optically active, helical polycarbenes possessed excellent enantioselective crystallization ability for threonine racemates. The enantiomeric excess (e.e.) of the induced crystals could be up to 83% via utilizing the prepared helical polycarbenes as a chiral separation agent.

3D NiO nanoflakes/carbon fiber meshwork: Facile preparation and utilization as general platform for photocathodic bioanalysis.

Herein, we describe a customized approach for facile preparation of three-dimensional (3D) NiO nanoflakes (NFs)/carbon fiber meshwork (CFM) and its validation as a common photocathode matrix for photoelectrochemical (PEC) bioanalysis, which to our knowledge has not been reported. Specifically, 3D NiO NFs/CFM was fabricated by a sequential liquid phase deposition and annealing process, which was then characterized by scanning electron microscopy, X-ray photoelectron spectrum, UV-vis absorption spectra and N2 adsorption-desorption measurement. Sensitized by BiOI and incorporated with an alkaline phosphatase (ALP)/tyrosinase (TYR) bi-enzyme cascade system, a sensitive split-type cathodic PEC bioanalysis for the determination of ALP was achieved. This method can detect ALP concentrations down to 3 × 10-5 U L-1 with a linear response range of 0.001-10 U L-1. Moreover, this proposed system exhibited good selectivity, stability and excellent performance for real sample analysis. This research features the facile preparation of 3D NiO NFs/CFM that could acts as a universal matrix for photocathodic analysis, and is envisioned to stimulate more effort for advanced 3D photocathode for PEC bioanalysis and beyond.

Modular ketal-linked prodrugs and biomaterials enabled by organocatalytic transisopropenylation of alcohols.

Isopropenyl ethers are critical intermediates for accessing medicinally valuable ketal-based prodrugs and biomaterials, but traditional approaches for the synthesis of isopropenyl ethers suffer from poor functional group compatibility and harsh reaction conditions. Here, we develop an organocatalytic transisopropenylation approach to solve these challenges, enabling the synthesis of isopropenyl ethers from various hydroxyl-group-containing small-molecule drugs, polymers, and functional building blocks. The method provides a straightforward and versatile synthesis of isopropenyl ethers, features excellent tolerance of diverse functional groups, applies to a wide range of substrates, and allows scalable synthesis. The development of this organocatalytic transisopropenylation approach enables access to modular preparation of various acid-sensitive ketal-linked prodrugs and functionalized ketalated biomaterials. We expect our syntheses and transformations of isopropenyl ethers will find utility in several diverse fields, including medicinal chemistry, drug delivery, and biomaterials.

Intelligent Drug Delivery Microparticles with Visual Stimuli-Responsive Structural Color Changes.

BACKGROUND: Particle-based drug delivery systems (DDSs) have a demonstrated value for drug discovery and development. However, some problems remain to be solved, such as limited stimuli, visual-monitoring. AIM: To develop an intelligent multicolor DDSs with both near-infrared (NIR) controlled release and macroscopic color changes. MATERIALS AND METHODS: Microparticles comprising GO/pNIPAM/PEGDA composite hydrogel inverse opal scaffolds, with dextran and calcium alginate hydrogel were synthesized using SCCBs as the template. The morphology of microparticle was observed under scanning electron microscopy, and FITC-dextran-derived green fluorescence images were determined using a confocal laser scanning microscope. During the drug release, FITC-dextran-derived green fluorescence images were captured using fluorescent inverted microscope. The relationship between the power of NIR and the drug release rate was obtained using the change in optical density (OD) values. Finally, the amount of drug released could be estimated quantitatively used the structural color or the reflection peak position. RESULTS: A fixed concentration 8% (v/v) of PEGDA and 4mg/mL of GO was chosen as the optimal concentration based on the balance between appropriate volume shrinkage and structure color. The FITC-dextran was uniformly encapsulated in the particles by using 0.2 wt% sodium alginate. The microcarriers shrank because of the photothermal response and the intrinsic fluorescence intensity of FITC-dextran in the microparticles gradually decreased at the same time, indicating drug release. With an increasing duration of NIR irradiation, the microparticles gradually shrank, the reflection peak shifted toward blue and the structural color changed from red to orange, yellow, green, cyan, and blue successively. The drug release quantity can be predicted by the structural color of microparticles. CONCLUSION: The multicolor microparticles have great potential in drug delivery systems because of its vivid reporting color, excellent photothermal effect, and the good stimuli responsivity.