Influence of Lytic Polysaccharide Monooxygenase Active Site Segments on Activity and Affinity.

In past years, new lytic polysaccharide monooxygenases (LPMOs) have been discovered as distinct in their substrate specificity. Their unconventional, surface-exposed catalytic sites determine their enzymatic activities, while binding sites govern substrate recognition and regioselectivity. An additional factor influencing activity is the presence or absence of a family 1 carbohydrate binding module (CBM1) connected via a linker to the C-terminus of the LPMO. This study investigates the changes in activity induced by shortening the second active site segment (Seg2) or removing the CBM1 from Neurospora crassa LPMO9C. NcLPMO9C and generated variants have been tested on regenerated amorphous cellulose (RAC), carboxymethyl cellulose (CMC) and xyloglucan (XG) using activity assays, conversion experiments and surface plasmon resonance spectroscopy. The absence of CBM1 reduced the binding affinity and activity of NcLPMO9C, but did not affect its regioselectivity. The linker was found important for the thermal stability of NcLPMO9C and the CBM1 is necessary for efficient binding to RAC. Wild-type NcLPMO9C exhibited the highest activity and strongest substrate binding. Shortening of Seg2 greatly reduced the activity on RAC and CMC and completely abolished the activity on XG. This demonstrates that Seg2 is indispensable for substrate recognition and the formation of productive enzyme-substrate complexes.

FRET Reveals the Formation and Exchange Dynamics of Protein-Containing Complex Coacervate Core Micelles.

The encapsulation of proteins into complex coacervate core micelles (C3Ms) is of potential interest for a wide range of applications. To address the stability and dynamic properties of these polyelectrolyte complexes, combinations of cyan, yellow, and blue fluorescent proteins were encapsulated with cationic-neutral diblock copolymer poly(2-methyl-vinyl-pyridinium)128- b-poly(ethylene-oxide)477. Förster resonance energy transfer (FRET) allowed us to determine the kinetics of C3M formation and of protein exchange between C3Ms. Both processes follow first-order kinetics with relaxation times of ±100 s at low ionic strength ( I = 2.5 mM). Stability studies revealed that 50% of FRET was lost at I = 20 mM, pointing to the disintegration of the C3Ms. On the basis of experimental and theoretical considerations, we propose that C3Ms relax to their final state by association and dissociation of near-neutral soluble protein-polymer complexes. To obtain protein-containing C3Ms suitable for applications, it is necessary to improve the rigidity and salt stability of these complexes.

Quantification of the catalytic performance of C1-cellulose-specific lytic polysaccharide monooxygenases.

Lytic polysaccharide monooxygenases (LPMOs) have recently been shown to significantly enhance the degradation of recalcitrant polysaccharides and are of interest for the production of biochemicals and bioethanol from plant biomass. The copper-containing LPMOs utilize electrons, provided by reducing agents, to oxidatively cleave polysaccharides. Here, we report the development of a ß-glucosidase-assisted method to quantify the release of C1-oxidized gluco-oligosaccharides from cellulose by two C1-oxidizing LPMOs from Myceliophthora thermophila C1. Based on this quantification method, we demonstrate that the catalytic performance of both MtLPMOs is strongly dependent on pH and temperature. The obtained results indicate that the catalytic performance of LPMOs depends on the interaction of multiple factors, which are affected by both pH and temperature.

Colorful Packages: Encapsulation of Fluorescent Proteins in Complex Coacervate Core Micelles.

Encapsulation of proteins can be beneficial for food and biomedical applications. To study their biophysical properties in complex coacervate core micelles (C3Ms), we previously encapsulated enhanced green fluorescent protein (EGFP) and its monomeric variant, mEGFP, with the cationic-neutral diblock copolymer poly(2-methyl-vinyl-pyridinium)n-b-poly(ethylene-oxide)m (P2MVPn-b-PEOm) as enveloping material. C3Ms with high packaging densities of fluorescent proteins (FPs) were obtained, resulting in a restricted orientational freedom of the protein molecules, influencing their structural and spectral properties. To address the generality of this behavior, we encapsulated seven FPs with P2MVP41-b-PEO205 and P2MVP128-b-PEO477. Dynamic light scattering and fluorescence correlation spectroscopy showed lower encapsulation efficiencies for members of the Anthozoa class (anFPs) than for Hydrozoa FPs derived from Aequorea victoria (avFPs). Far-UV CD spectra of the free FPs showed remarkable differences between avFPs and anFPs, caused by rounder barrel structures for avFPs and more elliptic ones for anFPs. These structural differences, along with the differences in charge distribution, might explain the variations in encapsulation efficiency between avFPs and anFPs. Furthermore, the avFPs remain monomeric in C3Ms with minor spectral and structural changes. In contrast, the encapsulation of anFPs gives rise to decreased quantum yields (monomeric Kusabira Orange 2 (mKO2) and Tag red fluorescent protein (TagRFP)) or to a pKa shift of the chromophore (FP variant mCherry).

Encapsulation of GFP in Complex Coacervate Core Micelles.

Protein encapsulation with polymers has a high potential for drug delivery, enzyme protection and stabilization. Formation of such structures can be achieved by the use of polyelectrolytes to generate so-called complex coacervate core micelles (C3Ms). Here, encapsulation of enhanced green fluorescent protein (EGFP) was investigated using a cationic-neutral diblock copolymer of two different sizes: poly(2-methyl-vinyl-pyridinium)41-b-poly(ethylene-oxide)205 and poly(2-methyl-vinyl-pyridinium)128-b-poly(ethylene-oxide)477. Dynamic light scattering and fluorescence correlation spectroscopy (FCS) revealed a preferred micellar composition (PMC) with a positive charge composition of 0.65 for both diblock copolymers and micellar hydrodynamic radii of approximately 34 nm. FCS data show that at the PMC, C3Ms are formed above 100 nM EGFP, independent of polymer length. Mixtures of EGFP and nonfluorescent GFP were used to quantify the amount of GFP molecules per C3M, resulting in approximately 450 GFPs encapsulated per micelle. This study shows that FCS can be successfully applied for the characterization of protein-containing C3Ms.

Bifunctional immobilization of a hyperthermostable endo-ß-1,3-glucanase.

Laminarinase A (LamA) from Pyrococcus furiosus is a hyperthermostable endo-ß-1,3-glucanase (EC 3.2.1.39) belonging to the glycosyl hydrolase family GH16. Here, we report the two-step immobilization of LamA on macroporous acrylic epoxy beads, extra-functionalized with disulfide groups. To facilitate initial immobilization via thiol-disulfide exchange, we introduced, by site-directed mutagenesis, a superficial cysteine residue near the protein C-terminal end. The thus-obtained S296C variant showed similar catalytic properties as native LamA. The activity of immobilized S296C displayed an inverse relationship with particle size. Use of conventional beads (150-300 µm in diameter) obstructed the catalytic efficiency due to pore diffusion limitation of the polysaccharide substrate. Bifunctional attachment to milled beads (20-40 µm) resulted in high enzyme load and outstanding catalytic features. Bifunctional immobilized S296C showed extreme pH stability and could be repeatedly used at 60 °C without significant activity loss.

Extending the diversity of Myceliophthora thermophila LPMOs: Two different xyloglucan cleavage profiles.

Lytic polysaccharide monooxygenases (LPMOs) play a key role in enzymatic conversion of plant cell wall polysaccharides. Continuous discovery and functional characterization of LPMOs highly contribute to the tailor-made design and improvement of hydrolytic-activity based enzyme cocktails. In this context, a new MtLPMO9F was characterized for its substrate (xyloglucan) specificity, and MtLPMO9H was further delineated. Aided by sodium borodeuteride reduction and hydrophilic interaction chromatography coupled to mass spectrometric analysis, we found that both MtLPMOs released predominately C4-oxidized, and C4/C6-double oxidized xylogluco-oligosaccharides. Further characterization showed that MtLPMO9F, having a short active site segment 1 and a long active site segment 2 (-Seg1+Seg2), followed a "substitution-intolerant" xyloglucan cleavage profile, while for MtLPMO9H (+Seg1-Seg2) a "substitution-tolerant" profile was found. The here characterized xyloglucan specificity and substitution (in)tolerance of MtLPMO9F and MtLPMO9H were as predicted according to our previously published phylogenetic grouping of AA9 LPMOs based on structural active site segment configurations.

Regioselective C4 and C6 Double Oxidation of Cellulose by Lytic Polysaccharide Monooxygenases.

Lytic polysaccharide monooxygenases (LPMOs) play a key role in enzymatic degradation of hard-to-convert polysaccharides, such as chitin and cellulose. It is widely accepted that LPMOs catalyze a single regioselective oxidation of the C1 or C4 carbon of a glycosidic linkage, after which the destabilized linkage breaks. Here, a series of novel C4/C6 double oxidized cello-oligosaccharides was discovered. Products were characterized, aided by sodium borodeuteride reduction and hydrophilic interaction chromatography coupled to mass spectrometric analysis. The C4/C6 double oxidized products were generated by C4 and C1/C4 oxidizing LPMOs, but not by C1 oxidizing ones. By performing incubation and reduction in H2 18 O, it was confirmed that the C6 gem-diol structure resulted from oxygenation, although oxidation to a C6 aldehyde, followed by hydration to the C6 gem-diol, could not be excluded. These findings can be extended to how the reactive LPMO-cosubstrate complex is positioned towards the substrate.

Mass spectrometric fragmentation patterns discriminate C1- and C4-oxidised cello-oligosaccharides from their non-oxidised and reduced forms.

Lytic polysaccharide monooxygenases (LPMOs) are powerful enzymes that degrade recalcitrant polysaccharides, such as cellulose. However, the identification of LPMO-generated C1- and/or C4-oxidised oligosaccharides is far from straightforward. In particular, their fragmentation patterns have not been well established when using mass spectrometry. Hence, we studied the fragmentation behaviours of non-, C1- and C4-oxidised cello-oligosaccharides, including their sodium borodeuteride-reduced forms, by using hydrophilic interaction chromatography and negative ion mode collision induced dissociation - mass spectrometry. Non-oxidised cello-oligosaccharides showed predominantly C- and A-type cleavages. In comparison, C4-oxidised ones underwent B-/Y- and X-cleavage close to the oxidised non-reducing end, while closer to the reducing end C-/Z- and A-fragmentation predominated. C1-oxidised cello-oligosaccharides showed extensively A-cleavage. Reduced oligosaccharides showed predominant glycosidic bond cleavage, both B-/Y- and C-/Z-, close to the non-reducing end. Our findings provide signature mass spectrometric fragmentation patterns to unambiguously elucidate the catalytic behaviour and classification of LPMOs.

Astin C Production by the Endophytic Fungus Cyanodermella asteris in Planktonic and Immobilized Culture Conditions.

The fungal endophyte Cyanodermella asteris (C. asteris) has been recently isolated from the medicinal plant Aster tataricus (A. tataricus). This fungus produces astin C, a cyclic pentapeptide with anticancer and anti-inflammatory properties. The production of this secondary metabolite is compared in immobilized and planktonic conditions. For immobilized cultures, a stainless steel packing immersed in the culture broth is used as a support. In these conditions, the fungus exclusively grows on the packing, which provides a considerable advantage for astin C recovery and purification. C. asteris metabolism is different according to the culture conditions in terms of substrate consumption rate, cell growth, and astin C production. Immobilized-cell cultures yield a 30% increase of astin C production, associated with a 39% increase in biomass. The inoculum type as spores rather than hyphae, and a pre-inoculation washing procedure with sodium hydroxide, turns out to be beneficial both for astin C production and fungus development onto the support. Finally, the influence of culture parameters such as pH and medium composition on astin C production is evaluated. With optimized culture conditions, astin C yield is further improved reaching a five times higher final specific yield compared to the value reported with astin C extraction from A. tataricus (0.89 mg g-1 and 0.16 mg g-1 respectively).

Oxidoreductases on their way to industrial biotransformations.

Fungi produce heme-containing peroxidases and peroxygenases, flavin-containing oxidases and dehydrogenases, and different copper-containing oxidoreductases involved in the biodegradation of lignin and other recalcitrant compounds. Heme peroxidases comprise the classical ligninolytic peroxidases and the new dye-decolorizing peroxidases, while heme peroxygenases belong to a still largely unexplored superfamily of heme-thiolate proteins. Nevertheless, basidiomycete unspecific peroxygenases have the highest biotechnological interest due to their ability to catalyze a variety of regio- and stereo-selective monooxygenation reactions with H2O2 as the source of oxygen and final electron acceptor. Flavo-oxidases are involved in both lignin and cellulose decay generating H2O2 that activates peroxidases and generates hydroxyl radical. The group of copper oxidoreductases also includes other H2O2 generating enzymes - copper-radical oxidases - together with classical laccases that are the oxidoreductases with the largest number of reported applications to date. However, the recently described lytic polysaccharide monooxygenases have attracted the highest attention among copper oxidoreductases, since they are capable of oxidatively breaking down crystalline cellulose, the disintegration of which is still a major bottleneck in lignocellulose biorefineries, along with lignin degradation. Interestingly, some flavin-containing dehydrogenases also play a key role in cellulose breakdown by directly/indirectly "fueling" electrons for polysaccharide monooxygenase activation. Many of the above oxidoreductases have been engineered, combining rational and computational design with directed evolution, to attain the selectivity, catalytic efficiency and stability properties required for their industrial utilization. Indeed, using ad hoc software and current computational capabilities, it is now possible to predict substrate access to the active site in biophysical simulations, and electron transfer efficiency in biochemical simulations, reducing in orders of magnitude the time of experimental work in oxidoreductase screening and engineering. What has been set out above is illustrated by a series of remarkable oxyfunctionalization and oxidation reactions developed in the frame of an intersectorial and multidisciplinary European RTD project. The optimized reactions include enzymatic synthesis of 1-naphthol, 25-hydroxyvitamin D3, drug metabolites, furandicarboxylic acid, indigo and other dyes, and conductive polyaniline, terminal oxygenation of alkanes, biomass delignification and lignin oxidation, among others. These successful case stories demonstrate the unexploited potential of oxidoreductases in medium and large-scale biotransformations.

Site-directed mutagenesis of selected residues at the active site of aryl-alcohol oxidase, an H2O2-producing ligninolytic enzyme.

Aryl-alcohol oxidase provides H(2)O(2) for lignin biodegradation, a key process for carbon recycling in land ecosystems that is also of great biotechnological interest. However, little is known of the structural determinants of the catalytic activity of this fungal flavoenzyme, which oxidizes a variety of polyunsaturated alcohols. Different alcohol substrates were docked on the aryl-alcohol oxidase molecular structure, and six amino acid residues surrounding the putative substrate-binding site were chosen for site-directed mutagenesis modification. Several Pleurotus eryngii aryl-alcohol oxidase variants were purified to homogeneity after heterologous expression in Emericella nidulans, and characterized in terms of their steady-state kinetic properties. Two histidine residues (His502 and His546) are strictly required for aryl-alcohol oxidase catalysis, as shown by the lack of activity of different variants. This fact, together with their location near the isoalloxazine ring of FAD, suggested a contribution to catalysis by alcohol activation, enabling its oxidation by flavin-adenine dinucleotide (FAD). The presence of two aromatic residues (at positions 92 and 501) is also required, as shown by the conserved activity of the Y92F and F501Y enzyme variants and the strongly impaired activity of Y92A and F501A. By contrast, a third aromatic residue (Tyr78) does not seem to be involved in catalysis. The kinetic and spectral properties of the Phe501 variants suggested that this residue could affect the FAD environment, modulating the catalytic rate of the enzyme. Finally, L315 affects the enzyme k(cat), although it is not located in the near vicinity of the cofactor. The present study provides the first evidence for the role of aryl-alcohol oxidase active site residues.

Directing the oligomer size distribution of peroxidase-mediated cross-linked bovine alpha-lactalbumin.

Enzymatic protein cross-linking is a powerful tool to change protein functionality. For optimal functionality in gel formation, the size of the cross-linked proteins needs to be controlled, prior to heating. In the current study, we addressed the optimization of the horseradish peroxidase-mediated cross-linking of calcium-depleted bovine alpha-lactalbumin. To characterize the formed products, the molecular weight distribution of the cross-linked protein was determined by size exclusion chromatography. At low ionic strength, more dimers of alpha-lactalbumin are formed than at high ionic strength, while the same conversion of monomers is observed. Similarly, at pH 5.9 more higher oligomers are formed than at pH 6.8. This is proposed to be caused by local changes in apo alpha-lactalbumin conformation as indicated by circular dichroism spectroscopy. A gradual supply of hydrogen peroxide improves the yield of cross-linked products and increases the proportion of higher oligomers. In conclusion, this study shows that the size distribution of peroxidase-mediated cross-linked alpha-lactalbumin can be directed toward the protein oligomers desired.