A Bottom-up Route to a Chemically End-to-End Assembly of Nanocellulose Fibers.

In this work, we take advantage of the rod-like structure of electrosterically stabilized nanocrystalline cellulose (ENCC, with a width of about 7 nm and a length of about 130 nm), which has dicarboxylated cellulose (DCC) chains protruding from both ends, providing electrosterical stability for ENCC particles, to chemically end-to-end assemble these particles into nanocellulose fibers. ENCC with shorter DCC chains can be obtained by a mild hydrolysis of ENCC with HCl, and subsequently the hydrolyzed ENCC (HENCC, with a width of about 6 nm and a length of about 120 nm) is suitable to be assembled into high aspect ratio nanofibers by chemically cross-linking HENCC from one end to another. Two sets of HENCC were prepared by carbodiimide-mediated formation of an alkyne and an azide derivative, respectively. Cross-linking these two sets of HENCC was performed by a click reaction. HENCCs were also end-to-end cross-linked by a bioconjugation reaction, with a diamine. From atomic force microscopy (AFM) images, about ten HENCC nanoparticles were cross-linked and formed high aspect ratio nanofibers with a width of about 6 nm and a length of more than 1 µm.

Crystallinity-driven morphological ripening processes for poly(ethylene oxide)-block-polycaprolactone micelles in water.

A set of morphological transformations induced by core crystallization within spherical micelle-like aggregates of poly(ethylene oxide)-block-polycaprolactone (PEO-b-PCL) is described in the present article. The initial self-assembly step, in which individual copolymer chains associate to form the spheres, can be performed reproducibly; the stability of these spheres, however, seems to be limited, as both transmission electron microscopy and light scattering data suggest that the primary spheres transform slowly into elongated rod-like or ribbon-like aggregates when suspended in deionized water at room temperature. Although the sphere-to-rod transition takes place typically over a time scale of several days, the formation of individual rods from spheres is very rapid, as evidenced by the progressive increase in the number of long rods and the conspicuous absence of short rods.

Multifunctional self-healing hydrogels via nanoengineering of colloidal and polymeric cellulose.

The unique features of self-healing hydrogels hold great potential for biomedical applications including injectable hydrogels for cancer treatment, procedures for tumor removal or resection. However, the fabrication of durable and multifunctional self-healing hydrogels composed of biocompatible, green building blocks via versatile synthetic methodology continues to pose a significant challenge. Here, we engineered dialdehyde cellulose (DAC, as a macromolecular bio-crosslinker), and electrosterically stabilized nanocrystalline cellulose (ENCC, as a ligand-targeted drug carrier) to facilitate a strategy for the construction of self-healing hydrogels. Benefiting from its high carboxyl group density, ENCC was functionalized with folic acid (FA) using a non-toxic DMTMM coupling agent and loaded with doxorubicin (DOX, a model drug) through electrostatic interactions. A natural self-healing hydrogel was prepared from carboxymethyl chitosan (CCTS) and DAC mixed with DOX-loaded FA-ENCC using dynamic Schiff-base and hydrogen linkages. A combination of active supramolecular and vital covalent junctions led to a soft (storage modulus ∼500 Pa) and durable material, with rapid (< 5 min) reconstruction of molecular structure from fractured and injected to intact forms. The DAC-CCTS hydrogel showed an appreciable loading capacity of ∼5 mg g-1. Biocompatibility of the hydrogels was evaluated using cell viability and metabolic activity assays, showing lower metabolic activity due to sustained release of its cargo. These materials offer a versatile, sustainable, and green platform for the efficient construction of hydrogels, based on macro- and nano-engineered cellulose, the most abundant and easily accessible biopolymer.

Binder-block copolymer micelle interactions in bactericidal filter paper.

We previously produced a bactericidal filter paper loaded with PAA47-b-PS214 block copolymer micelles containing the biocide triclosan (TCN), using cationic polyacryamide (cPAM) as a binder. However, we encountered a very slow filtration, resulting in long bacteria deactivation times. Slow drainage occurred only when the filter paper was left to dry. It appears that the filter paper with cPAM and micelles develops hydrophobic properties responsible for this very slow filtration. Three approaches were taken to accelerate the very slow drainage all based on modification of binder-micelle interactions: (i) keeping the micelles wet, (ii) modification of the corona, and (iii) replacing cPAM with smaller and more highly charged cationic poly(isopropanol dimethylammonium) chloride (PIDMAC). In all cases, the drainage time of bactericidal filter paper became close to that of untreated filter paper, without decreasing its efficiency. Moreover, replacing cPAM with PIDMAC led to a much more efficient bactericidal filter paper that reduced bacteria viability by more than 6 orders of magnitude. In addition to resolving the hydrophobic drainage hurdle, the three solutions also offer a better understanding of the interaction between cPAM and micelles in the filter paper.

Films prepared from electrosterically stabilized nanocrystalline cellulose.

Electrosterically stabilized nanocrystalline cellulose (ENCC) was modified in three ways: (1) the hydroxyl groups on C2 and C3 of glucose repeat units of ENCC were converted to aldehyde groups by periodate oxidation to various extents; (2) the carboxyl groups in the sodium form on ENCC were converted to the acid form by treating them with an acid-type ion-exchange resin; and (3) ENCC was cross-linked in two different ways by employing adipic dihydrazide as a cross-linker and water-soluble 1-ethyl-3-[3-(dimethylaminopropyl)] carbodiimide as a carboxyl-activating agent. Films were prepared from these modified ENCC suspensions by vacuum filtration. The effects of these three modifications on the properties of films were investigated by a variety of techniques, including UV-visible spectroscopy, a tensile test, thermogravimetric analysis (TGA), the water vapor transmission rate (WVTR), and contact angle (CA) studies. On the basis of the results from UV spectra, the transmittance of these films was as high as 87%, which shows them to be highly transparent. The tensile strength of these films was increased with increasing aldehyde content. From TGA and WVTR experiments, cross-linked films showed much higher thermal stability and lower water permeability. Furthermore, although the original cellulose is hydrophilic, these films also exhibited a certain hydrophobic behavior. Films treated by trichloromethylsilane become superhydrophobic. The unique characteristics of these transparent films are very promising for potential applications in flexible packaging and other high-technology products.

Synthesis and characterization of hairy aminated nanocrystalline cellulose.

HYPOTHESIS: The synthesis and characterization of aminated nanocrystalline cellulose (ANCC), a new member of the hairy nanocellulose family, is reported. Hairy nanocelluloses consist of a crystalline rod-like body with amorphous cellulose chains ("hairs") at both ends, on which various functional groups can be accommodated. In ANCC these groups are reactive primary amine groups, which are useful for bioconjugation- and Schiff base-centered modifications. We hypothesize that a two-step oxidation-reductive amination of cellulose fibers followed by hydrothermal treatment will result in the formation of rod-like hairy ANCC. EXPERIMENTS: ANCC was prepared by converting the aldehyde groups in cellulose, introduced by a periodate oxidation, to primary amines using ammonia and sodium borohydride, followed by a hot water treatment, during which diamine modified cellulose fibers were converted to ANCC. ANCC was characterized by AFM, TEM, DLS, ELS, FTIR, NMR, XPS and conductometric titration. Antibacterial activity of ANCC was assessed by the viable cell counting method. FINDINGS: ANCC, with an amine content of 5.5 mmol g-1 is a bare nanocolloid (i.e. non-coated, without adsorbed polyelectrolytes or surfactants) which, as far as we know, has a positive charge density larger than any other bare cationic nanocolloid. It was observed that ANCC particles have a needle-like morphology with a width of ~ 5 nm and a length ~ 120 nm. DLS results proof that ANCC is hairy. Spectroscopic analysis confirmed the introduction of surface primary amine groups. ANCC showed promising bactericidal activities, against Gram-negative species due to their thinner and penetrable cell wall.

Quantitative analysis of cationic poly(vinyl alcohol) diffusion into the hairy structure of cellulose fiber pores: charge density effect.

The diffusion of charged polymers into the pores of cellulose fibers has not yet been fully understood due to the complexity of the interaction between polymers and fibers. In this paper, the diffusion of cationic-modified poly(vinyl alcohol) (CPVA) with tailored charge densities and a relatively high molecular weight into the pores of bleached aspen high-yield pulp (via a chemi-thermomechanical pulping process) was quantitatively investigated via an adsorption analysis, charge density analysis, and solute exclusion technique (SET). The results showed that the adsorption of the low-charged CPVA was substantially higher than that of the high-charged CPVA on fibers. The surface charge density analysis confirmed that approximately 17 mg/g of the high-charged CPVA adsorbed on the outer surface and on the macropores of fibers and the remaining (23 mg/g) diffused into the pores. The SET analysis confirmed that the pore size of fibers was more significantly reduced by applying the low-charged CPVA than the high-charged one. The influencing factors for the diffusion of CPVA into the large and small pores were related to the repulsion force developed between the adsorbed polymers and approaching polymers, entropy increase, and the polymer flexibility. The Brunauer-Emmett-Teller surface area analysis showed an increase in the surface area of fibers upon CPVA adsorption. It was proposed that the diffused CPVA prevented complete fiber pore collapse during drying, which eventually increased the surface area of fibers.

Deactivation efficiency of stabilized bactericidal emulsions.

Biocide emulsions stabilized with various stabilizing agents were prepared and characterized, and their efficiency in bacteria deactivation was evaluated. A number of stabilizing agents were tested for their stabilizing effect on emulsions of thiocyanomethylthiobenzothiazole (TCMTB) biocide. Two agents, the most successful in stabilizing the biocide, were chosen for further studies: high molecular weight polyethyleneimine (PEI) and an amphiphilic block copolymer of poly(caprolactone)-b-poly(acrylic acid) (PCL(33)-b-PAA(33)). The emulsion droplet sizes varied between 325 and 500 nm. Deactivation of bacteria was studied by exposing E. coli ATCC 11229 bacteria dispersions to emulsions stabilized by positively charged PEI or negatively charged PCL-b-PAA micelles and by measuring their absorbance; E. coli do not grow with time in the presence of biocide emulsions. PEI molecules alone act as biocide and deactivate the bacteria. PCL-b-PAA micelles as stabilizing agent do not affect the growth of the E. coli ; bacteria are deactivated by TCMTB released from the emulsion droplets. The kinetics of emulsion dissolution studies revealed for both stabilizing agents a decrease in droplet size with time while the emulsions were subjected to dialysis. The biocide was released from the emulsions within ∼250 min; the droplet shells consist mostly of PEI or PCL-b-PAA insoluble complexes with the biocide, which do not dissolve during dialysis. SEM images confirm the presence of residual crumbled shells with holes after 24 h of dialysis.

Biotemplated Hollow Mesoporous Silica Particles as Efficient Carriers for Drug Delivery.

We designed three types of hollow-shaped porous silica materials via a three-step biotemplate-directed method: porous hollow silica nanorods, hollow dendritic fibrous nanostructured silica (DFNS), and ultraporous sponge-like DFNS. The first step was making a biotemplate, for which we used cellulose nanocrystals (CNCs), consisting of rod-shaped nanoparticles synthesized by conventional acid hydrolysis of cellulose fibers. In a second step, core-shell samples were prepared using CNC particles as hard template by two procedures. In the first one, core-shell CNC-silica nanoparticles were synthesized by a polycondensation reaction, which exclusively took place at the surface of the CNCs. In the second procedure, a typical synthesis of DFNS was conducted in a bicontinuous microemulsion with the assistance of additives. DFNS was assembled on the surface of the CNCs, giving rise to core-shell CNC-DFNS structures. Finally, all of the silica-coated CNC composites were calcined, during which the CNC was removed from the core and hollow structures were formed. These materials are very lightweight and highly porous. All three structures were tested as nanocarriers for drug delivery and absorbents for dye removal applications. Dye removal results showed that they can adsorb methylene blue efficiently, with ultraporous sponge-like DFNS showing the highest adsorption capacity, followed by hollow DFNS and hollow silica nanorods. Furthermore, breast cancer cells show a lower cell viability when exposed to doxorubicin-loaded hollow silica nanorods compared with control or doxorubicin cultures, suggesting that the loaded nanorod has a greater anticancer effect than free doxorubicin.

Carboxylated Cellulose Nanocrystals Developed by Cu-Assisted H2O2 Oxidation as Green Nanocarriers for Efficient Lysozyme Immobilization.

Cellulose nanocrystals (CNCs), having a high specific surface area and versatile surface chemistry, provide considerable potential to interact by various mechanisms with enzymes for nano-immobilization purposes. However, engineering chemically safe CNCs, suitable for edible administrations, presents a significant challenge. A reliable carboxylate form of H-CNCs was formed using H2O2 oxidation of softwood pulp under mild thermal conditions. Negatively charged carboxyl groups (∼0.9 mmol g-1) played a key role in lysozyme immobilization via electrostatic interactions and covalent linkages, as evidenced by Fourier transform infrared and 13C cross-polarization magic angle spinning nuclear magnetic resonance spectroscopies. Adsorption isotherms showed a high loading capacity of H-CNCs (∼240 mg g-1), and fitting the data to the Langmuir model confirmed monolayer coverage of lysozyme on their surface. Using a non-toxic coupling agent, 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride, lysozyme-conjugated H-CNCs were developed with an immobilization yield of ∼65% and relative catalytic activity of ∼60%, similar to lysozyme adsorption on H-CNCs. These H-CNC-lysozyme nanohybrids, rationally processed via safe and green strategies, are specifically exploitable as catalytically active emulsifiers in food and pharmaceutical sectors.

Cellulose-based dispersants and flocculants.

Natural dispersants and flocculants, often referred to as dispersion stabilizers and liquid-solid separators, respectively, have secured a promising role in the bioprocessing community. They have various applications, including in biomedicine and in environmental remediation. A large fraction of existing dispersants and flocculants are synthesized from non-safe chemical compounds such as polyacrylamide and surfactants. Despite numerous advantages of synthetic dispersants and flocculants, issues such as renewability, sustainability, biocompatibility, and cost efficiency have shifted attention towards natural homologues, in particular, cellulose-based ones. Within the past decade, cellulose derivatives, obtained via chemical and mechanical treatments of cellulose fibrils, have successfully been used for these purposes. In this review article, by dividing the functional cellulosic compounds into "polymeric" and "nanoscale" categories, we provide insight into the engineering pathways, the structural frameworks, and surface chemistry of these "green" types of dispersants and flocculants. A summary of their efficiency and the controlling parameters is also accompanied by recent advances in their applications in each section. We are confident that the emergence of cellulose-based dispersing and flocculating agents will extend the boundaries of sustainable green technology.

Highly Absorbent Antibacterial and Biofilm-Disrupting Hydrogels from Cellulose for Wound Dressing Applications.

In this study, a carboxyl-modified cellulosic hydrogel was developed as the base material for wound dressings. ε-poly-l-lysine, a natural polyamide, was then covalently linked to the hydrogel through a bioconjugation reaction, which was confirmed by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR). The antibacterial efficacy of the hydrogel was tested against two model bacteria, Staphylococcus aureus and Pseudomonas aeruginosa, two of the most commonly found bacteria in wound infections. Bacterial viability and biofilm formation after exposure of bacteria to the hydrogels were used as efficacy indicators. Live/Dead assay was used to measure the number of compromised bacteria using a confocal laser scanning microscope. The results show that the antibacterial hydrogel was able to kill approximately 99% of the exposed bacteria after 3 h of exposure. In addition, NIH/3T3 fibroblasts were used to study the biocompatibility of the developed hydrogels. Water-soluble tetrazolium salt (WST)-1 assay was used to measure the metabolic activity of the cells and Live/Dead assay was used to measure the viability of the cells after 24, 48, and 72 h. The developed antibacterial hydrogels are light weight, have a high water-uptake capacity, and show high biocompatibility with the model mammalian cells, which make them a promising candidate to be used for wound dressing applications.

Microalgae harvesting with the novel flocculant hairy cationic nanocrystalline cellulose.

This paper investigates the flocculation of Chlorella sorokiniana suspensions with a novel cellulose derivative, namely hairy cationic nanocrystalline cellulose (CNCC). CNCC are a brand new family of nanocellulose characterized by having two positively charged amorphous ends joint through a common crystalline shaft. Flocculation was monitored through laser reflectance and its mechanism was studied by means of zeta potential, fractal dimension and turbidity removal. CNCC dosage and shear rate were varied and their effect on floc morphology and filterability were assessed. CNCC effectively flocculated the cultures at dosages well below and over the isoelectric point, being the flocculation mechanisms and floc strength highly dependent on the doses applied. The filtration propensity of flocculated suspensions proved highly sensitive to small differences in flocs' geometry. The aggregation process entailed two phases, a first one in which the CNCC adsorbed on the surface of microalgal cells according to a flat random deposition up to reaching a maximal cell coverage, and a second one in which the free spots left were progressively covered with orthogonally deposited CNCC, being this later configuration the main responsible for intercellular attachment. The present work demonstrates that CNCC is an effective flocculant of microalgal cell suspensions and constitutes an alternative worth exploring for the aggregation of other cells' suspensions.

Loading and release mechanisms of a biocide in polystyrene-block-poly(acrylic acid) block copolymer micelles.

The kinetics of loading of polystyrene197-block-poly(acrylic acid)47 (PS197-b-PAA47) micelles, suspended in water, with thiocyanomethylthiobenzothiazole biocide and its subsequent release were investigated. Loading of the micelles was found to be a two-step process. First, the surface of the PS core of the micelles is saturated with biocide, with a rate determined by the transfer of solid biocide to micelles during transient micelle-biocide contacts. Next, the biocide penetrates as a front into the micelles, lowering the Tg in the process (non-Fickian case II diffusion). The slow rate of release is governed by the height of the energy barrier that a biocide molecule must overcome to pass from PS into water, resulting in a uniform biocide concentration within the micelle, until Tg is increased to the point that diffusion inside the micelles becomes very slow. Maximum loading of biocide into micelles is approximately 30% (w/w) and is achieved in 1 h. From partition experiments, it can be concluded that the biocide has a similar preference for polystyrene as for ethylbenzene over water, implying that the maximum loading is governed by thermodynamics.

Characterization of Carboxylated Cellulose Nanocrytals Isolated through Catalyst-Assisted H2O2 Oxidation in a One-Step Procedure.

A green and facile method was designed to isolate a type of cellulose nanocrystal (CNC) with carboxylated surfaces from native cellulose materials. Because isolation and modification processes of cellulosic particles are generally performed separately using harmful chemicals and multiple steps, the one-pot approach employed in this work is interesting from both an economical and ecological point of view. The reaction is carried out by adding hydrogen peroxide as an oxidant and copper(II) sulfate as a catalyst in acidic medium under mild thermal conditions. The charge content of the carboxylated CNC is about 1.0 mmol g-1, measured by a conductometric titration. Fourier transform infrared spectroscopy also proved the presence of carboxyl groups on the CNC particles. Atomic force microscopy along with optical polarized microscopy readily showed a rod shape morphology for the cellulosic particles. An average length of 263 nm and width of 23 nm were estimated by transmission electron microscopy. Dynamic laser scattering on carboxylated CNC suspensions by adding salt confirmed that nanoparticles are electrostatically stable. Carboxylated CNCs were furthermore characterized by solid carbon-13 nuclear magnetic resonance and X-ray spectroscopy.

Developing Antibacterial Nanocrystalline Cellulose Using Natural Antibacterial Agents.

We used hairy nanocrystalline cellulose functionalized with aldehyde groups, otherwise known as sterically stabilized nanocrystalline cellulose (SNCC), to facilitate the attachment of the antibacterial agents lysozyme and nisin. Immobilization was achieved using a simple, green process that does not require any linker or activator. X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy analyses showed successful attachment of both nisin and lysozyme onto the SNCC. The efficacy of the conjugated nanocellulose against the model bacteria Bacillus subtilis and Staphylococcus aureus was tested in terms of bacterial growth, cell viability, and biofilm formation/removal. The results show that the minimum inhibitory concentration of the conjugated nanocellulose is higher than that of lysozyme and nisin in free form, which was expected given that immobilization reduces the possible spatial orientations of these proteins. We observed that free nisin is not active against S. aureus after 24 h of exposure due to either deactivation of free nisin or development of resistance in S. aureus against free nisin. Interestingly, we did not observe this phenomenon when the bacteria were exposed to antibacterials immobilized on nanocellulose, suggesting that immobilization of antibacterial agents onto SNCC effectively retains their activity over long time periods. We suggest that antibacterial SNCC is a promising candidate for the development of antibacterial wound dressings.

Origin of the twist of cellulosic materials.

Molecular Mechanics, Hartree-Fock, and semi-empirical geometry optimizations were carried out on cellulose oligomers and crystallites with and without water solvation. The intramolecular bonding is visualized with the Delocalized Molecular Orbitals (DLMOs). Internal coordinates were relaxed and the structures were gradient optimized for cellulose oligomers composed of 4, 10, 12, 14, 19, and 65 glucose units. The cellulose conformation of minimum energy deviates from the flat ribbon conformation giving rise to half-twist repeating units of about 3-4nm and 60nm along the chain axis. An optimized cellulose chain which is ten glucose units long is 9.57kcal/mol more stable than the flat ribbon model. The DLMOs show the twisted model retains the same hydrogen bonding scheme as the flat model while minimizing steric interactions between H1 and H4'. In cellulose crystallites the twist, which can be left- or right-handed, calls into question the assumption of twofold symmetry in the current flat unit cell. Additionally the hydrogen bonded sheets reorient themselves, suggesting the crystallites are in fact crystalloids. The overall length of the crystal twist is dependent on the cross-section of the crystal. Powder X-ray diffraction patterns of the optimized crystallites were simulated.

Highly Stable, Functional Hairy Nanoparticles and Biopolymers from Wood Fibers: Towards Sustainable Nanotechnology.

Nanoparticles, as one of the key materials in nanotechnology and nanomedicine, have gained significant importance during the past decade. While metal-based nanoparticles are associated with synthetic and environmental hassles, cellulose introduces a green, sustainable alternative for nanoparticle synthesis. Here, we present the chemical synthesis and separation procedures to produce new classes of hairy nanoparticles (bearing both amorphous and crystalline regions) and biopolymers based on wood fibers. Through periodate oxidation of soft wood pulp, the glucose ring of cellulose is opened at the C2-C3 bond to form 2,3-dialdehyde groups. Further heating of the partially oxidized fibers (e.g., T = 80 °C) results in three products, namely fibrous oxidized cellulose, sterically stabilized nanocrystalline cellulose (SNCC), and dissolved dialdehyde modified cellulose (DAMC), which are well separated by intermittent centrifugation and co-solvent addition. The partially oxidized fibers (without heating) were used as a highly reactive intermediate to react with chlorite for converting almost all aldehyde to carboxyl groups. Co-solvent precipitation and centrifugation resulted in electrosterically stabilized nanocrystalline cellulose (ENCC) and dicarboxylated cellulose (DCC). The aldehyde content of SNCC and consequently surface charge of ENCC (carboxyl content) were precisely controlled by controlling the periodate oxidation reaction time, resulting in highly stable nanoparticles bearing more than 7 mmol functional groups per gram of nanoparticles (e.g., as compared to conventional NCC bearing << 1 mmol functional group/g). Atomic force microscopy (AFM), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) attested to the rod-like morphology. Conductometric titration, Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), dynamic light scattering (DLS), electrokinetic-sonic-amplitude (ESA) and acoustic attenuation spectroscopy shed light on the superior properties of these nanomaterials.

Association-induced polymer bridging by poly(ethylene oxide)-cofactor flocculation systems.

Poly(ethylene oxide) (PEO) is used in papermaking, water purification and mineral flotation as a flocculating agent. Despite the fact that PEO does not adsorb on cellulose and bleached lignin, and only poorly on calcium carbonate, it can nevertheless be used to deposit colloidal pigments on pulp fibers. PEO by itself is inefficient, but it can be made to work in combination with another compound, usually referred to as a cofactor or an enhancer. The cofactor associates with PEO and the association complex acts as an efficient bridging agent. There are two classes of cofactor: those who cause PEO to cluster and those that do not. In general PEO association-clusters are more efficient flocculating agents than non-clustered PEO. The PEO dissolution procedure has an important effect on the PEO flocculation efficiency. Before reaching thermodynamic equilibrium, PEO is in an entangled state. Cofactors that cluster PEO are likely to maintain PEO in an entangled state and, like the association-clusters, these entanglements are more efficient flocculation agents than well-dispersed PEO. Salt also affects the PEO-cofactor association. For most cofactors, salt is needed to induce the association. Calcium ions can act as bridging agents between association complexes, especially those containing carboxyl groups, thus promoting the formation of association-clusters.

Cellulose nanocrystals with tunable surface charge for nanomedicine.

Crystalline nanoparticles of cellulose exhibit attractive properties as nanoscale carriers for bioactive molecules in nanobiotechnology and nanomedicine. For applications in imaging and drug delivery, surface charge is one of the most important factors affecting the performance of nanocarriers. However, current methods of preparation offer little flexibility for controlling the surface charge of cellulose nanocrystals, leading to compromised colloidal stability under physiological conditions. We report a synthesis method that results in nanocrystals with remarkably high carboxyl content (6.6 mmol g(-1)) and offers continuous control over surface charge without any adjustment to the reaction conditions. Six fractions of nanocrystals with various surface carboxyl contents were synthesized from a single sample of softwood pulp with carboxyl contents varying from 6.6 to 1.7 mmol g(-1) and were fully characterized. The proposed method resulted in highly stable colloidal nanocrystals that did not aggregate when exposed to high salt concentrations or serum-containing media. Interactions of these fractions with four different tissue cell lines were investigated over a wide range of concentrations (50-300 µg mL(-1)). Darkfield hyperspectral imaging and confocal microscopy confirmed the uptake of nanocrystals by selected cell lines without any evidence of membrane damage or change in cell density; however a charge-dependent decrease in mitochondrial activity was observed for charge contents higher than 3.9 mmol g(-1). A high surface carboxyl content allowed for facile conjugation of fluorophores to the nanocrystals without compromising colloidal stability. The cellular uptake of fluoresceinamine-conjugated nanocrystals exhibited a time-dose dependent relationship and increased significantly with doubling of the surface charge.